Malaysia has strict laws requiring seat belt use by all vehicle occupants. However, neither passive devices nor inertial reel belts are mandated. Seat belt usage was investigated among 60 taxicab drivers in Kuala Lumpur, Malaysia, in 1993. Although all drivers appeared to be restrained during an initial curb-side inspection, 60% did not fasten the latch. There was no statistical difference between ethnic groups. Curb-side estimates of restraint use may overestimate actual usage, resulting in falsely low estimates of effectiveness. Requiring inertial reel belts, which would retract if not latched, could greatly increase actual restraint use. This may be cost effective for developing nations.
Matched MeSH terms: Accidents, Traffic/prevention & control
In 1997, a Motorcycle Safety Programme (MSP) was introduced to address the motorcycle-related accident problem. The MSP was specifically targeted at motorcyclists. In addition to the MSP, the recent economic recession has significantly contributed to a reduction of traffic-related incidents. This paper examines the effects of the recent economic crisis and the MSP on motorcycle-related accidents, casualties and fatalities in Malaysia. The autocorrelation integrated moving average model with transfer function was used to evaluate the overall effects of the interventions. The variables used in developing the model were gross domestic product and MSPs. The analysis found a 25% reduction in the number of motorcycle-related accidents, a 27% reduction in motorcycle casualties and a 38% reduction in motorcycle fatalities after the implementation of MSP. Findings indicate that the MSP has been one of the effective measures in reducing motorcycle safety problems in Malaysia. Apart from that, the performance of the country's economy was also found to be significant in explaining the number of motorcycle-related accidents, casualties and fatalities in Malaysia.
Matched MeSH terms: Accidents, Traffic/prevention & control
This paper presents the approach taken by the Malaysian Government to contain motorcycle casualties in Malaysia. It involves the exposure control, crash prevention, behaviour modification and injury control related to humans, vehicles and the environment based on pre-crash, crash and post-crash scenarios of motorcycle accidents. These initiatives emanated mainly from the research and development carried out by the Road Safety Research Centre at Universiti Putra Malaysia. Recent outcomes from these initiatives are presented and their impact is highlighted.
Scientific progress is a significant basis for change in public-health policy and practice, but the field also invests in value-laden concepts and responds daily to sociopolitical, cultural and evaluative concerns. The concepts that drive much of public-health practice are shaped by the collective and individual mores that define social systems. This paper seeks to describe the ethics processes in play when public-health mechanisms are established in low- and middle-income countries, by focusing on two cases where ethics played a crucial role in producing positive institutional change in public-health policy. First, we introduce an overview of the relationship between ethics and public health; second, we provide a conceptual framework for the ethical analysis of health system events, noting how this approach might enhance the power of existing frameworks; and third, we demonstrate the interplay of these frameworks through the analysis of a programme to enhance road safety in Malaysia and an initiative to establish a national ethics committee in Pakistan. We conclude that, while ethics are gradually being integrated into public-health policy decisions in many developing health systems, ethical analysis is often implicit and undervalued. This paper highlights the need to analyse public-health decision-making from an ethical perspective.
Matched MeSH terms: Accidents, Traffic/prevention & control
Road traffic injuries (RTIs) are a growing public health problem that must be addressed through evidence-based interventions including policy-level changes such as the enactment of legislation to mandate specific behaviors and practices. Policy makers need to be engaged in road safety research to ensure that road safety policies are grounded in scientific evidence. This paper examines the strategies used to engage policy makers and other stakeholder groups and discusses the challenges that result from a multi-disciplinary, inter-sectoral collaboration. A framework for engaging policy makers in research was developed and applied to describe an example of collective road safety research in Malaysia. Key components of this framework include readiness, assessment, planning, implementation/evaluation, and policy development/sustainability. The case study of a collaborative intervention trial for the prevention of motorcycle crashes and deaths in Malaysia serves as a model for policy engagement by road safety and injury researchers. The analytic description of this research process in Malaysia demonstrates that the framework, through its five stages, can be used as a tool to guide the integration of needed research evidence into policy for road safety and injury prevention.
This study uses computer simulations to study the impact of a motorcycle with the conventional w-beam guardrail. A three-dimensional computer simulation of a scaled hybrid III 50th-percentile male dummy mounted on a motorcycle and colliding with a w-beam guardrail is carried out. A multi-body model of the motorcycle and finite element model of the guardrail are developed using commercially available software. The simulation model is validated with a physical crash test conducted with same initial impact configurations. Impacts at speeds of 32, 48, and 60 km/h at an impact angle at 45 degrees are considered. The predicted forces and accelerations are compared with the biomechanical limits for each body part and the risk of injury to the rider are evaluated. Speed was found to have a significant influence on the level of injury to the head, neck, chest, and femur. A significant reduction of the severity of injuries was found when the impact speed was reduced from 60 to 32km/h. The accelerations experienced by the head and chest are found to be higher than safe levels for impact speeds of 48 and 60 km/h. The biomechanical limit for the right femur is exceeded at all three considered impact speeds. Neck injuries are also a concern, with the predicted tension values and neck bending extent being higher than the biomechanical limit for the 60 km/h impact speed. In light of these results, it is suggested that the design of guardrails should be reviewed with a focus on the safety of motorcyclists.
Recent empirical research has found that there is an inverted U-shaped or Kuznets relationship between income and motor vehicle crash (MVC) deaths, such that MVC deaths increase as national income increases and decrease after reaching a critical level. Corruption has been identified as one of the underlying factors that could affect this relationship, primarily by undermining institutional development and effective enforcement schemes. The total effect of corruption can be decomposed into two components, a direct and an indirect effect. The direct effect measures the immediate impact of corruption on MVC deaths by undermining effective enforcement and regulations, while the indirect effect captures the impact of corruption on hindering increases in per capita income and the consequent impact of reduced income on MVC deaths. By influencing economic growth, corruption can lead to an increase or decrease in MVC deaths depending on the income level. Using data from 60 countries between 1982 and 2003, these effects are estimated using linear panel and fixed effects negative binomial models. The estimation results suggest that corruption has different direct effects for less developed and highly developed countries. It has a negative (decreasing) effect on MVC deaths for less developed countries and a positive (increasing) effect on MVC deaths for highly developed countries. For highly developed countries, the total effect is positive at lower per capita income levels, but decreases with per capita income and becomes negative at per capita income levels of about US$ 38,248. For less developed countries, the total effect is negative within the sample range and decreases with increased per capita income. In summary, the results of this study suggest that reduction of corruption is likely a necessary condition to effectively tackle road safety problems.
Obstructive sleep apnea (OSA) has been identified as one of the significant risk factors for motor vehicle crashes (MVCs). In the interest of public safety, this study was conducted to determine the prevalence of OSA and its associated factors among express bus drivers in Malaysia. Identifying factors or conditions related with OSA is very important because they can be used as indicators to subject a person to a confirmatory diagnosis using polysomnography testing.
Most highly motorized countries in the world have implemented different speed limits for light weight and heavy weight vehicles. The heavy vehicle speed limit is usually chosen to be lower than that of passenger cars due to the difficulty for the drivers to safely maneuver the heavy vehicle at high speed and greater impact during a crash. However, in many cases, the speed limit for heavy vehicle is set by only considering the vehicle size or category, mostly due to simplicity in enforcement. In this study, traffic and vehicular data for all vehicle types were collected using a weigh-in-motion system installed at Federal Route 54 in Malaysia. The first finding from the data showed that the weight variation for each vehicle category is considerable. Therefore, the effect of gross vehicle weight (GVW) and category of heavy vehicle on free flow speed and their interaction were analyzed using statistical techniques. Empirical analysis results showed that statistically for each type of heavy vehicle, there was a significant relationship between free flow speed of a heavy vehicle and GVW. Specifically, the results suggest that the mean and variance of free flow speed decrease with an increase GVW by the amount unrelated to size and shape for all GVW range. Then, based on the 85th percentile principle, the study proposed a new concept for setting the speed limit for heavy vehicle by incorporating GVW where a different speed limit is imposed to the heavy vehicle, not only based on vehicle classification, but also according to its GVW.
Railway level crossings are amongst the most complex of road safety control systems, due to the conflicts between road vehicles and rail infrastructure, trains and train operations. Driver behaviour at railway crossings is the major collision factor. The main objective of the present paper was to evaluate the existing conventional warning devices in relation to driver behaviour. The common conventional warning devices in Australia are a stop sign (passive), flashing lights and a half boom-barrier with flashing lights (active). The data were collected using two approaches, namely: field video recordings at selected sites and a driving simulator in a laboratory. This paper describes and compares the driver response results from both the field survey and the driving simulator. The conclusion drawn is that different types of warning systems resulted in varying driver responses at crossings. The results showed that on average driver responses to passive crossings were poor when compared to active ones. The field results were consistent with the simulator results for the existing conventional warning devices and hence they may be used to calibrate the simulator for further evaluation of alternative warning systems.
Matched MeSH terms: Accidents, Traffic/prevention & control
Fatigue-related crashes have long been the topic of discussion and study worldwide. The relationship between fatigue-related crashes and time of day is well documented. In Malaysia, the possibility of banning express buses from operating during the early-hours of the morning has emerged as an important consideration for passenger safety. This paper highlights the findings of an impact assessment study. The study was conducted to determine all possible impacts prior to the government making any decision on the proposed banning. This study is an example of a simple and inexpensive approach that may influence future policy-making process. The impact assessment comprised two major steps. The first step involved profiling existing operation scenarios, gathering information on crashes involving public express buses and stakeholders' views. The second step involved a qualitative impact assessment analysis using all information gathered during the profiling stage to describe the possible impacts. Based on the assessment, the move to ban early-hour operations could possibly result in further negative impacts on the overall road safety agenda. These negative impacts may occur if the fundamental issues, such as driving and working hours, and the need for rest and sleep facilities for drivers, are not addressed. In addition, a safer and more accessible public transportation system as an alternative for those who choose to travel at night would be required. The proposed banning of early-hour operations is also not a feasible solution for sustainability of express bus operations in Malaysia, especially for those operating long journeys. The paper concludes by highlighting the need to design a more holistic approach for preventing fatigue-related crashes involving express buses in Malaysia.
In 2006, the Malaysian government began implementing road safety education (RSE) programs in primary schools, involving numerous stakeholders. We interviewed 19 stakeholders. Thematic analysis led to the identification of four themes: road traffic injuries (RTIs) among children in Malaysia, the role of RSE, factors affecting successful implementation, and intersectoral involvement. The latter was identified as a significant strength of the overall approach to implementation, and is one of the first examples in Malaysia and in the region of such an approach. Lack of official documentation surrounding ownership, funding responsibilities, and roles among the various sectors led to resistance from some groups. Although we know from scientific studies what works in terms of reducing RTIs, the more important question is how such interventions can be successfully and sustainably implemented, particularly in low- and middle-income countries (LMIC). The results of this study permit stronger understanding of issues surrounding the implementation of RTI interventions in LMIC.
Road safety barriers protect vehicles from roadside hazards by redirecting errant vehicles in a safe manner as well as providing high levels of safety during and after impact. This paper focused on transition safety barrier systems which were located at the point of attachment between a bridge and roadside barriers. The aim of this study was to provide an overview of the behavior of transition systems located at upstream bridge rail with different designs and performance levels. Design factors such as occupant risk and vehicle trajectory for different systems were collected and compared. To achieve this aim a comprehensive database was developed using previous studies. The comparison showed that Test 3-21, which is conducted by impacting a pickup truck with speed of 100 km/h and angle of 25° to transition system, was the most severe test. Occupant impact velocity and ridedown acceleration for heavy vehicles were lower than the amounts for passenger cars and pickup trucks, and in most cases higher occupant lateral impact ridedown acceleration was observed on vehicles subjected to higher levels of damage. The best transition system was selected to give optimum performance which reduced occupant risk factors using the similar crashes in accordance with Test 3-21.
This paper uses data from an observational study, conducted at access points in straight sections of primary roads in Malaysia in 2012, to investigate the effects of motorcyclists' behavior and road environment attributes on the occurrence of serious traffic conflicts involving motorcyclists entering primary roads via access points. In order to handle the unobserved heterogeneity in the small sample data size, this study applies mixed effects logistic regression with multilevel bootstrapping. Two statistically significant models (Model 2 and Model 3) are produced, with 2 levels of random effect parameters, i.e. motorcyclists' attributes and behavior at Level 1, and road environment attributes at Level 2. Among all the road environment attributes tested, the traffic volume and the speed limit are found to be statistically significant, only contributing to 26-29% of the variations affecting the traffic conflict outcome. The implication is that 71-74% of the unmeasured or undescribed attributes and behavior of motorcyclists still have an importance in predicting the outcome: a serious traffic conflict. As for the fixed effect parameters, both models show that the risk of motorcyclists being involved in a serious traffic conflict is 2-4 times more likely if they accept a shorter gap to a single approaching vehicle (time lag <4s) and in between two vehicles (time gap <4s) when entering the primary road from the access point. A road environment factor, such as a narrow lane (seen in Model 2), and a behavioral factor, such as stopping at the stop line (seen in Model 3), also influence the occurrence of a serious traffic conflict compared to those entering into a wider lane road and without stopping at the stop line, respectively. A discussion of the possible reasons for this seemingly strange result, including a recommendation for further research, concludes the paper.
This paper focuses on the study of the change of various types of riding behaviour, such as speed, brake force, and throttle force applied, when they ride across the speed table. An instrumented motorcycle equipped with various types of sensor, on-board camera, and data logger was used in acquiring the traffic data in the research. Riders were instructed to ride across two speed tables and the riding data were then analyzed to study the behaviour change from different riders. The results from statistical analysis showed that the riding characteristics such as speed, brake force, and throttle force applied are influenced by distance from hump, riding experience, and travel mileage of riders. Riders tend to apply higher brake intensity at distance point 50 m before the speed table and release the braking at point -10 m after the hump. In short, speed table has different rates of influence towards riding behaviour on different factors, such as distance from hump and different riders' attributes.
Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented.
The increase in the number of fatalities caused by road accidents involving heavy vehicles every year has raised the level of concern and awareness on road safety in developing countries like Malaysia. Changes in the vehicle dynamic characteristics such as gross vehicle weight, travel speed, and vehicle classification will affect a heavy vehicle's braking performance and its ability to stop safely in emergency situations. As such, the aim of this study is to establish a more realistic new distance-based safety indicator called the minimum safe distance gap (MSDG), which incorporates vehicle classification (VC), speed, and gross vehicle weight (GVW).