Orthogonal Frequency Division Multiplexing (OFDM) is a successful technique in wireless communication systems. Frequency offset in the OFDM system leads to loss of orthogonality among subcarriers which results in the occurrence of intercarrier interference (ICI). To improve the efficiency of bandwidth performance in the ICI self-cancellation scheme, frequency domain partial response signaling (PRS) was investigated. In this study, the integer polynomial partial response coefficients were exploited to enhance carrier-to-interference power ratio (CIR) in the OFDM system. CIR was enhanced up to 4.1 dB to 5 dB when the lengths of PRS polynomial, K was 2 and 5, respectively.
Spatio-temporal datasets are a collection of datasets where data can vary in both space and time. Theoretically, such datasets can be considered as continuous and discrete. For example, specification of the function, F: Ed T Rn, where Ed denotes d-dimensional Euclidean space, T = R* ∩ {} the domain of time and Rn an n-dimensional scalar field. Examples of such data sets include time-varying simulation results, film and videos, time-varying medical datasets, geometry models with motion or deformation, meteorological measurements, and many more. It is therefore highly desirable to use visualisation to summarize meaningful information in higher dimensional spatio-temporal datasets. Our aim is to conceive an efficient visual study to facilitate scientists in identifying temporal association among complex and chaotic atom movements in ion trajectories. An application that uses a streamline for spatial motion of ion trajectories and Colour Number Coding Scheme for temporal encoding of high degree of timeline events among mobile ions is proposed. With an anthology of the visual examples, it was revealed that this application would be beneficial for scientists to visually mine any 3D spatio-temporal dataset.
An optical code generating device for a portable optical access-card system was constructed using the plastic optical fibre (POF) waveguide coupler. The newly constructed device provided output light intensities which were used as optical codes in a portable optical access-card system. The construction of a basic 1 × 2 waveguide design combined two major components which were the asymmetric Y-junction splitter and the linear taper. A hollow waveguide structure was utilized as it provided more flexibility in guiding light rays. A basic 1 × 2 waveguide coupler was designed using the CAD tool and then the ray was traced using the non-sequential ray tracing tool. A linear relationship between the tap-off ratio and the waveguide tap-width enabled a higher-level hollow waveguide coupler to be designed using the simple cascading technique. Construction of a 1 × 4 and higher level waveguide coupler was easily realized using the basic 1 × 2 waveguide coupler design together with a simple cascading technique.
Elevated temperature affects marine benthic algae by reducing growth and limits the transport of electron or carbon fixation which may reduce the ability of the cell to use light. This resulting excess light energy may cause photoinhibition. In this study, the photosystem II of the benthic microalgal communities from Casey, eastern Antarctic were relatively unaffected by significant changes in temperatures up to 8ºC, along with high PAR level (450 μmol photons m–2 s–1). Similarly, the community was able to photosynthesize as the temperature was reduced to –5ºC. Recovery from saturating and photoinhibiting irradiances was not significantly influenced by temperatures at both –5ºC and 8ºC. These responses were consistent with those recorded by past experiments on Antarctic benthic diatoms and temperate diatoms which showed that climate change did not have a significant impact on the ability of benthic microalgae to recover from photoinhibitory temperature stress.
A monitoring procedure was introduced for process variability in a multivariate setting based on individual observations which was a combination of (i) robust high breakdown point approach in the set-up stage to determine the reference sample and (ii) the use of Wilks chart in the mass production stage. This setting is what the Malaysian manufacturing industry is currently lacking in, especially when a robust approach must be used. The advantage of this procedure was revealed by using the case of a female shrouded connector production process in a Malaysian industry. Moreover, this procedure could also be used in any process quality monitoring and for any industry. A recommendation for quality practitioners was also addressed.
The unsustainable harvesting of sea cucumbers in the Straits of Malacca poses a danger of collapsing population of this marine resource. Recent survey revealed the absence of commercially important sea cucumber species like Stichopus horrens was alarming since there were a lot of taxonomical complications in identifying species from this genus. The knowledge of taxonomy and ecology is an integral part in determining resource management strategies and conservation of marine resources like sea cucumber.
The paper seeks to assuage the fears and worries over living modified organisms (LMOs). It describes how any research carried out on LMOs as well as any release activity on LMOs for public use in Malaysia is controlled by the Biosafety Act 2007. Stringent risk assessment of the LMO and its product/s is carried out to eradicate or minimize the negative effects of these on animal and human health, and to biological diversity and the environment. In contrast, no such risk assessment is carried out on introduced exotic species, or on the products of other types of technology, with the exception of pharmaceuticals. Examples are given comparing risk assessment on LMOs and exotic species.
Responses were recorded from normal healthy subjects and age-related macular degeneration (AMD) patients and evaluated, using a new variant of mfVEP. Subjects information was recorded using 64 EEG channels with a computer-based acquisition system. The stimulus layout was a 84 region corticallyscaled dartboard comprising 12 sectors and seven concentric rings subtending a diameter of 23º, presented dichoptically at 60 Hz. Data from the control and AMD patients were statistically compared when fitted concurrently into the multiple regression analysis. The Pattern-pulse mfVEP technique could distinguish between normal eyes and those with a definite diagnosis of dry and wet AMD when responses from the macula were considered.
Current National Design Specification (NDS 2005) provides the guideline to design timber joints strengthened with steel fasteners. This study investigates the possibility of using NDS 2005 to estimate the load-carrying capacity of timber joints fastened with Glass Fibre Reinforced Polymer (GFRP) dowel. Double shear timber joint fastened with steel dowels were tested to validate the joints fastened with GFRP using 1.27 cm diameter dowels. Tests were also conducted to determine the dowel bearing strength of wood and dowel bending strength of GFRP and steel. The failure modes of all tests were observed and recorded. Results showed that NDS (2005) successfully estimated the failure mode and was capable of predicting the joint load-carrying capacity when fastened with a GFRP dowel and this was well validated by the load carrying capacity of a steel dowel.
The main purpose of this study is to determine shoreline change in Bengkalis Cape, Riau Province, Indonesia using sediment samples analysis, satellite images, and oceanographic parameters. The samples were collected at five stations by using sediment grab and oceanographic observation was also carried out at each station in November 2015. The southern part of Bengkalis Cape is characterised by fine-grain sediments (mud) and high rate of accretion that reaches 29.77 metre/year, and is influenced by weak tidal currents with a velocity of less than 0.06 m/s and low wave energy. In contrast, the northern part is occupied by coarse-grain sediments (sand) which is characterised by high rate of abrasion as shown in the image data for 20 years; 1995-2015 reaches 38.02 metre/year, and is under the influence of strong tidal current (0.16 m/s) and high wave energy. The major contributing factor for the shoreline change is the current system which flowing from Malacca strait to the shore area and sediments deposition in the area.
The human brain generates different oscillations at different frequencies during various consciousness levels. When these brain waves synchronize with exogenous rhythmic stimulation, the brain experiences strong, yet relaxing emotion that could be involved in the formation of memory. We investigated the character of rhythmic oscillatory dynamics by electroencephalography (EEG) of subjects listening to a short verse of the Holy Quran compared to resting and Arabic news listening. The mean power amplitudes of each frequency band for wavelet-based time-frequency analysis were obtained from 5000 ms of segmented EEG recordings during rest, news and Quran listening conditions. The time series analysis of power from each of three conditions in each frequency band from the grand averaged data was then subjected to autocorrelation study. The results showed significant cyclic overall trends of increasing and decreasing patterns of power in the low frequency brain wave oscillation of different head regions especially global, frontal and temporal sites. These results provided a basis for prediction of the periodicity of the power of the oscillatory brain dynamics of delta and robustly in theta regions which occurred during Quran listening. Despite several limitations, our data offered a plausible scientific basis to the emotional induction during Quran listening that mimics recognized as data from music listening studies. This offered a promising perspective for future studies in translational neurophysiological, cognitive and biofeedback on Quran listening to modify brain behaviour in health and disease.
The aim of this work was to investigate the effect of glycerol concentration on mechanical
and physical properties of gellan gum (GG) biofilm. The biofilm was prepared using solvent
casting method and the effective glycerol concentration was found to be within 30-50%
w/w (based on GG weight). At 60 and 70 w/w% of glycerol, the films started to distort
because the films was flexible and brittle. As glycerol concentration was increased the tensile
strength (TS) and Youngs modulus (E) of films decreased. Somehow, elongation at break
(EAB), water vapor transmission rate (WVTR) and swelling of films was increased. Glycerol
plasticized GG biofilm was thermally stable and flexible, proposed its can be exploited as
film-forming material and with optimized glycerol concentration it has good mechanical and
physical properties for edible biofilm.
An analysis of the power spectral density of ultra-wideband (UWB) signals is presented in order to evaluate the effects of cumulative interference from multiple UWB devices on victim narrowband systems in their overlay bands like WiFi (i.e. IEEE802.11a) and 3rdG systems (Universal mobile telecommunications system/wideband code division multiple access). In this paper, the performances are studied through the bit-error-rate as a function of signal-to-noise ratio as well as signal-to-interference power ratio using computer simulation and exploiting the realistic channel model (i.e. modified Saleh-Valenzuela model). Several modifications of a generic Gaussian pulse waveform with lengths in the order of nanoseconds were used to generate UWB spectra. Different kinds of pulse modulation (i.e. antipodal and orthogonal) schemes were also taken into account.
Affordable and greener materials were extensively studied in electrode fabrication for Liion
based batteries but less interest was shown to proton battery. Hence, in this work,
a methodology on preparing a natural based binder for proton battery was reported. 2-
Hydroxyethyl Cellulose (2HEC) was chosen to replace PVDF commercial binder in electrode
for ZnSO4|MnO2 proton battery configuration. SEM image shows good surface formation
for both anode and cathode with good porous structure. OCV result shows that the cell
improved the stable voltage of reference cell of 0.7 V to 0.9 V after 24 hours. The first
discharge of the cell took 6 hours and 49 minutes at 0.005mA and shows good potential for
rechargebility test.
In this present study, a series of polymer electrolyte thin films were synthesized by incorporating different ratios of lithium triflate (LiCF3SO3) in a low molecular weight polyvinyl chloride (PVC) matrix by the solution casting technique. The incorporation of LiCF3SO3 suppressed the high degree of crystallinity in PVC enabling the system to possess an appreciable ionic conductivity. The ionic conductivity of the samples, with different LiCF3SO3 content, was determined by the aid of ac impedance spectroscopy. The highest ionic conductivity of 4.04 10–9 S cm–1 was identified for the composition of PVC: LiCF3SO3 (75:25). Further understanding of the ionic conductivity mechanism was based on temperature-dependent conductivity data which obeyed Arrhenius theory, indicating that the ionic conductivity enhancement was thermally assisted. The possible dipole-dipole interaction between the chemical constituents was confirmed with changes in cage peak, analysed using Fourier transform infrared spectroscopy.
Warm compaction is an advanced manufacturing technique which consists of two consecutive steps, i.e. powder compaction at above ambient temperature and sintering in a controlled environment. Due to the relative movement between the powder mass and die wall as well as sliding among powder particles, frictional force is generated during the compaction stage. Admixed lubricant is used during the compaction step in order to minimize friction and hence improve the uniformity of the density of distribution inside the component. However, during the sintering process, trapped lubricant is often found to be burnt out hence leaving pores or voids which result in the lower strength of the final products. Warm compaction was initiated in the nineties, however not much information has been published about the effects of lubrication on the quality of the components produced through this route. Therefore, this paper presents the outcome of an experimental investigation about the effects of lubrication on manufacturing near-net shape components through the warm compaction route. Iron powder ASC 100.29 was mixed mechanically with zinc stearate to prepare the feedstock. Mixing time, weight percentage of lubricant content and compaction temperature were varied during green compact generation while sintering temperature, heating rate and holding time were manipulated during sintering. The relative densities and strengths of the final products were investigated at every compaction as well as sintering parameter. The results revealed that lubrication could provide significant effects at the compaction temperature of 180ºC while no significant effect of lubrication was observed during sintering. The suitable lubricant content was found to be 0.4 wt% and mixing time was around 30 min and the sintering temperature was around 990ºC.
Through the six domains of the health-related quality of life (HRQOL) - physical, psychological, level of independence, social relationship, environment and spirituality or religion - ten out of one hundred randomly selected studies were analysed and evaluated as a theoretical outcome of self care using health products such as food supplements, multivitamins and minerals. A reconstructed HRQOL tool was used in the qualitative and the quantitative analysis and evaluation of the ten selected studies. A Critical Appraisal Skills Programme tool was also used in making sense of the evidences of the study trials. The Population, Intervention, Comparison and Outcome guide focused the protocol for the selection of the studies used in this meta-analysis. A probability sampling generated a uniform distribution of the populations. The manner of consuming or the route of administration, the volume and the preparation of commercially prepared health products were neither analysed nor evaluated as the exclusion criteria. Of the ten studies, nine gave a high significance to the six domains of the (O.R. = 90% / p =
The electron-phonon coupling constant of the copper oxide-based high temperature superconductors in the van Hove scenario was calculated using three known models and by employing various acoustic data. Three expressions for the transition temperature from the models were used to calculate the constants. All three models assumed a logarithmic singularity in the density of states near the Fermi surface. The calculated electron-phonon coupling constant ranged from 0.06 to 0.28. The constants increased with the transition temperature indicating a strong correlation between electron-phonon coupling and superconductivity in these materials. These values were smaller than the values estimated for the conventional three-dimensional BCS theory. The results were compared with previous reports on direct measurements of electron-phonon coupling constants in the copper oxide based superconductors.
Aim: This study analyses factors affecting SP compliance among doctors and nurses in all areas of hospital settings worldwide.
Methods: The PICO guide helped put focus on this meta-analysis. Of the 100 studies published from search engines and/or databases from 2009 to 2014, only four were selected. A PRISMA guideline was also used to eliminate other studies. Critique framework helped in analysing the studies selected.
Outcomes: Four significant factors affected doctors’ and nurses’ compliance with the practice of SPs - health threats, behaviour modifications, systems controls and educations, and health promotions. Of the 33 doctors in the Obstetrics and Gynaecologic department, 30% complied; of the 120 doctors - 60% interns, 34.2% residents and 5.8% consultants - complied by proper hand gloving (56.7%), hand hygiene (39.3%) and wearing aprons (58.3%); of the 32 hospital nurses, 100% complied; and of the 1,444 clinical nurses in the hospital, there is a p
The role of science and technology (S&T) in preventing disasters and building resilience to climate change is featured in this paper, drawing primarily on the presentations and discussion of researchers, practitioners and policy makers from 31 institutions in 17 countries during the Workshop on Natural Disasters and Climate Change in Asia, held on 5–7 November 2012 in Bangi, Malaysia. Issues highlighted include advances in climate modelling and weather forecasts, with emphasis on information gaps; hazards and its cascading effects, focusing on current research and approaches; and the potential for land-based mitigation-adaptation strategies. Progress in mobilizing S&T to support disaster prevention and climate resilience is hindered by factors such as absence or lack of research, incomplete and non-existent scientific records, restricted access to data and capacity to innovate and transmit S&T, among others. The establishment of an Asian Network for Climate Science and Technology is proposed to provide and facilitate exchange of information and aid development of research co-ordination projects led by Asian researchers and possibly to act as a one-stop repository of global climate change related research too. The scope of the network would cover climate research with particular relevance to disaster resilience, including scientific capacity, which is all very distinct in Asia.