Among the many roles played by small and medium enterprises (SMEs) in the food industry is the production of heritage foods such as peanut sauce. Unfortunately, the safety of peanut sauce is not always assured as the processing line is not controlled. Peanut sauce is usually made of peanuts and chilli, and these commodities are normally contaminated with Aspergillus spp. and aflatoxins (AFs). Hence, the objective of this study was to evaluate the practices related to reduction of AF hazard and the effect of interventions in peanut sauce processing. Peanut samples were collected from each step of peanut sauce processing from a small peanut sauce company according to four designs: (1) control; (2) oil-less frying of chilli powder; (3) addition of retort processing; and (4) combination of oil-less frying of chilli powder and retort processing. Oil-less frying of chilli powder (Design 2) reduced total AFs by 33-41%, retort processing (Design 3) reduced total AFs by 49%, while combination of these two thermal processes (Design 4) significantly reduced total AFs, by 57%. The present work demonstrated that Design 4 yielded the highest reduction of total AFs and is therefore recommended to be employed by SME companies.
The objective of the study was to determine the effect of different types of soy sauce and marinating time on the formation of heterocyclic amines (HCAs) in roasted chicken. Chicken breast samples were marinated with sweet, salty, light and dark soy sauce at 0, 3, 6 and 12 h (control treatment was the chicken without marinade). The concentrations of free amino acids, sugars and creatinine were determined before roasting while HCA concentrations were determined after roasting. All types of soy sauce significantly increased (p ≤ 0.05) the concentration of HCAs in roasted chicken with increasing marinating time. The highest increment of total concentration of HCAs was found in samples marinated with light soy sauce (887%) followed by dark (375%), salty (193%) and sweet (169%) at 12 h. PhIP (2-amino-1-methyl-6-phenylimidazo(4,5-b)pyridine) showed a substantial reduction in samples only momentarily marinated with sweet, salty and dark soy sauce (0 h). Free amino acids were found to be more strongly correlated with the formation of HCAs than reducing sugars or creatinine.
Camel meat production for human consumption and pet food manufacture accounts for a relatively small part of overall red meat production in Australia. Reliable statistical data for the Australian production and consumption of camel meat are not available; however, it is estimated that 300,000 feral camels roam within the desert of central Australia, with an annual usage of more than 3000 camels for human consumption, 2000 for pet food manufacture and a smaller number for live export. Despite a small Australian camel meat production level, the usage of camel meat for pet food has been restricted in recent years due to reports of serious liver disease and death in dogs consuming camel meat. This camel meat was found to contain residues of indospicine, a non-proteinogenic amino acid found in certain Indigofera spp., and associated with mild to severe liver disease in diverse animals after dietary exposure to this hepatotoxin. The extent of indospicine-contaminated Australian camel meat was previously unknown, and this study ascertains the prevalence of such residue in Australian camel meat. In this study, indospicine levels in ex situ (95 samples collected from an abattoir in Queensland) and in situ (197 samples collected from camels after field culling in central Australia) camel meat samples were quantitated using a validated ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The quantitation results showed 46.7% of the in situ- and 20.0% of the ex situ-collected camel meat samples were contaminated by indospicine (more than the limit of detection (LOD) of 0.05 mg kg(-1) fresh weight). The overall indospicine concentration was higher (p < 0.05) in the in situ-collected samples. Indospicine levels detected in the present study are considered to be low; however, a degree of caution must still be exercised, since the tolerable daily intake for indospicine is currently not available for risk estimation.
The demand for crocodile meat is quickly growing because of its exotic and organoleptic appeal and also the low content of cholesterol and lipids. Moreover, crocodile oil and blood have been used in alternative medicines for treating asthma and several other ailments since ancient times. Furthermore, crocodile hides have great demand in leather industries. All of these have collectively contributed to the extensive hunting, illegal trading and consequent decline of crocodiles in most parts of the world. To keep space with the growing demands, some crocodile species such as Crocodylus porosus have been raised in farms and its commercial trades have been legalised. However, demand for wild crocodiles in foods and medicines has continued in high gear. Recently, several DNA-based methods have been proposed for crocodile detection, but those assays are based on single gene and longer-sized amplicon targets that break down during extensive processing. To address this gap, here we developed and validated a highly stable double gene targeted multiplex PCR assay for the identification of C. porosus materials in commercial products. The assay involved two short sites from C. porosus atp6 (77 bp) and cytb (127 bp) genes and a universal internal control (99 bp) for eukaryotes. The PCR primers were cross-tested against 18 species and validated under pure and mixed matrices under extensive boiling, autoclaving and microwave cooking conditions. Finally, it was used to identify five crocodile-based commercial products. The lower limits of detection for atp6 and cytb genes were 0.001 ng and 0.01 ng DNA, respectively, in pure meat and 1% under mixed matrices. Some inherent features, such as 77-127 bp amplicon sizes, exceptional stability and superior sensitivity, suggested the assay could be used for the identification of C. porosus in any forensic specimen.
This study investigated the simultaneous formation of polycyclic aromatic hydrocarbons (PAHs) and heterocyclic aromatic amines (HCAs) in gas-grilled beef satay at different temperatures (150, 200, 250, 300, and 350°C). Solid-phase extraction (SPE) was used for sample clean-up. Fifteen PAHs were determined using high performance liquid chromatography with fluorescence detection (HPLC-FLD) and nine HCAs were quantified using liquid chromatography tandem-mass spectrometry (LC-MS/MS) with a gradient programme. The lowest significantly concentrations of PAHs and HCAs were generated at 150°C; the formation of PAHs and HCAs simultaneously increased with temperatures. Benzo[a]pyrene was detected in all samples and increased markedly at 300 and 350°C. The sums of 4 PAHs (PAH4) in marinated beef satay at 300 and 350°C exceeded the maximum level in Commission Regulation (EU) 2015/1125. Significant reductions of polar and non-polar HCAs (except PhIP) were found in marinated beef satay across all temperatures. Overall, PAHs and HCAs showed opposite trends of formation in beef satay with marination.
Detection of porcine plasma using indirect ELISA was developed using mAb B4E1 for the prevention of their usage in human food that creates religious and health conflicts. The immunoassay has a CV
Halal authentication has become essential in the food industry to ensure food is free from any prohibited ingredients according to Islamic law. Diversification of food origin and adulteration issues have raised concerns among Muslim consumers. Therefore, verification of food constituents and their quality is paramount. From conventional methods based on physical and chemical properties, various diagnostic methods have emerged relying on protein or DNA measurements. Protein-based methods that have been used in halal detection including electrophoresis, chromatographic-based methods, molecular spectroscopy and immunoassays. Polymerase chain reaction (PCR) and loop-mediated isothermal amplification (LAMP) are DNA-based techniques that possess better accuracy and sensitivity. Biosensors are miniatured devices that operate by converting biochemical signals into a measurable quantity. CRISPR-Cas is one of the latest novel emerging nucleic acid detection tools in halal food analysis as well as quantification of stable isotopes method for identification of animal species. Within this context, this review provides an overview of the various techniques in halal detection along with their advantages and limitations. The future trend and growth of detection technologies are also discussed in this review.
The presence of 3-monochloropropanediol esters (3-MCPDE), 2-monochloropropanediol esters (2-MCPDE) and glycidyl esters (GE) in infant formula products has raised serious concerns. They incorporate vegetable oils, particularly palm-based oils, which are well-known to contain large amounts of these process contaminants. An analysis was conducted on infant formula samples (n = 16) obtained from the Malaysian market to determine the levels of 3-MCPDE, 2-MCPDE and GE using gas chromatography-mass spectrometry (GC-MS). The method was validated, with a limit of quantification (LOQ) on instrument of 0.10 µg/g for all analytes. The median concentrations of 3-MCPDE, 2-MCPDE and GE in infant formula in this study were 0.008 µg/g, 0.003 µg/g and 0.002 µg/g respectively. The estimated dietary intakes calculated from consumption of infant formula show higher exposures to infants within the age group of 0 to 5 months, highest for GE (1.61 µg/kg bw/day), followed by 3-MCPDE (0.68 µg/kg bw/day) and 2-MCPDE (0.41 µg/kg bw/day) compared to the age group of 6 to 12 months. Only one sample, relating to GE exposure is a potential risk for both age groups with MOE value below 25,000.
3-Monochloropropane-1,2-diol esters (3-MCPDE) are food contaminants commonly found in refined vegetable oils and fats, which have possible carcinogenic implications in humans. To investigate this clinically, we conducted an occurrence level analysis on eight categories of retail and cooked food commonly consumed in Malaysia. This was used to estimate the daily exposure level, through a questionnaire-based case-control study involving 77 subjects with renal cancer, with 80 matching controls. Adjusted Odds Ratio (AOR) was calculated using the multiple logistic regression model adjusted for confounding factors. A pooled estimate of total 3-MCPDE intake per day was compared between both groups, to assess exposure and disease outcome. Among the food categories analysed, vegetable fats and oils recorded the highest occurrence levels (mean: 1.91 ± 1.90 mg/kg), significantly more than all other food categories (p
Esters of 2- and 3-monochloropropanediol (2-MCPDE, 3-MCPDE) and glycidol (GE) are regarded as process contaminants that are found in refined vegetable oils and oil-based foods. Since glycerol is produced during fat splitting, saponification and biodiesel production, it is important to have methods for determining contaminants that might be formed during these processes. Due to the use of glycerol as a food additive, data on the presence of compounds of toxicological concern, including 3-MCPD, are of interest. This study focuses on modifying the indirect analysis of 2-MCPDE, 3-MCPDE and GE using GC-MS based on the AOCS Official Method Cd 29a-13, validating the modified method, and quantifying 2-MCPDE, 3-MCPDE and GE in glycerol. The AOCS Cd 29a-13 method was modified at the initial stage of sample preparation in which the targeted esters were extracted from glycerol by vortex-assisted extraction before sample analysis. This modification was performed based on the polarity of all compounds involved. The calibration functions for all analytes were fitted to linear regression with R2 above 0.99. Limits of detection (LOD) 0.02, 0.01 and 0.02 mg kg-1 were obtained for 2-MCPDE, 3-MCPDE and GE, respectively. Spiked glycerol with 3-MCPDE and 2-MCPDE (0.25, 0.51 and 1.01 mg kg-1) and GE (0.58, 1.16 and 2.32 mg kg-1) were used for recovery and precision measurements. Recoveries of 100-108%, 101-103%, and 93-99% were obtained for 2-MCPDE, 3-MCPDE and GE, respectively. Acceptable precision levels with relative standard deviations ranged from 3.3% to 8.3% were obtained for repeatability and intermediate precision. The validated method was successfully applied for the analysis of the target compounds in refined glycerol from commercial plants, which showed that 2-MCPDE, 3-MCPDE and GE levels in the analysed samples were below the detection limit.
Food contaminated with heavy metals poses a serious threat to consumers. This study aims to assess levels of lead (Pb) and cadmium (Cd) in offals of chicken, cattle, and pig as well as tin (Sn) in canned food. A total of 378 offal samples was collected from wet markets, while 218 canned food samples were purchased locally. Samples were digested using a microwave before analysis with inductively coupled plasma mass spectrometry (ICP-MS). Pb was determined, highest in cattle lung (0.11 ± 0.20 mg/kg) followed by cattle spleen (0.09 ± 0.14 mg/kg), and cattle tripe (0.09 ± 0.12 mg/kg). For Cd, the highest concentrations were in cattle liver (0.13 ± 0.12 mg/kg), pig liver (0.08 ± 0.05 mg/kg), and chicken liver (0.03 ± 0.02 mg/kg). Significant variations of Sn levels existed in different canned food categories with 3.21% samples (n = 7) exceeded the maximum level of 250 mg/kg set by Codex Alimentarius. All offal samples were below the Malaysian regulatory limits, indicating their safety for human consumption. However, Sn levels varied significantly among canned food categories, with the highest levels found in canned pineapple chunks in syrup, mixed pineapple cubes in syrup, pineapple slices and longan. Samples exceeding the maximum level set by Codex Alimentarius may pose a risk to consumers.
Lateral flow devices (LFDs) are straightforward scientific tools that have made substantial advances in recent years. They have been used in many fields including the meat industry to detect disease markers, determine meat freshness or meat species determination. They are, therefore, significant in the research of meat adulteration by mixed animal species, because food component authenticity is a serious concern encompassing health, economic, legal, and religious issues. Pork adulteration is one of the most crucial issues in the global meat industry. In this review, we discuss the various types of LFDs and recent research on the development of LFDs as an authenticity tool for detecting pig additives in meat-based products, and how regulatory authorities could adopt LFDs for their workflows. Despite the benefits of rapidity, simplicity, low cost, high sensitivity, and specificity, researchers face challenges when using LFD as a final confirmation test. Future directions are suggested for globalising the use of LFD as a halal authentication method.
The rising concern about the presence of 3-monochloropropane 1,2 diol ester (3-MCPDE) and glycidyl ester (GE) in food has prompted much research to be conducted. Some process modifications and the use of specific chemicals have been employed to mitigate both 3-MCPDE and GE. Alkalisation using NaOH, KOH, alkali metals or alkaline earth metals and post sparging with steam or ethanol and short path distillation have shown simultaneous mitigation of 51-91% in 3-MCPDE and of 13-99% in GE, both contaminants achieved below 1000 µg/kg. Some of the mitigation methods have resulted in undesirable deterioration in other parameters of the refined oil. When the processed oil is used in food processing, it results in changes to 3-MCPDE and GE. Repeated deep frying above 170 °C in the presence of NaCl and baking at 200 °C with flavouring (dried garlic and onion), resulted in increased 3-MCPDE. Repeated frying in the presence of antioxidants (TBHQ, rosemary and phenolics) decreased 3-MCPDE in processed food. The GE content in foods tends to decline with time, indicating instability of GE's epoxide ring.
The presence of 3-monochloropropane-1,2 diol ester (3-MCPDE) and glycidyl ester (GE) in processed palm oils is of concern, as these oils are widely used for edible purposes. The mitigation method studied here optimizes the removal of chloride through water washing of crude palm oil (CPO), to limit the formation of 3-MCPDE. The contaminant removal obtained via washing CPO supports the quantitative findings. By utilizing 5% water in the washing step, water-soluble chlorides in CPO are removed by up to 76%, resulting in a 71% reduction of 3-MCPDE to within statutory limits. In this study, a linear correlation was developed between the chloride and the corresponding 3-MCPDE with a correlation coefficient (R2) of 0.99. Using the correlations, 1.0 mg/kg of 3-MCPDE in refined, bleached and deodorized palm oil (RBDPO) will be obtained from CPO with 1.2 mg/kg chloride with 7% wash water usage. The study also showed minor GE reduction between 7 and 11% was attained after water washing.
The inclusion of ingredients derived from pigs in highly processed consumer products poses a significant challenge for DNA-targeted analytical enforcement, which could be overcome by using digital PCR. However, most species detection methods use digital PCR to target single-copy nuclear genes, which limits their sensitivity. In this work, we examined the performance of a nanoplate-based digital PCR method that targets multi-copy nuclear (MPRE42) and mitochondrial (Cytb) genes. Poor separation of positive and negative partitions, as well as a 'rain effect' were obtained in the porcine-specific MPRE42 assay. Among the optimization strategies examined, the inclusion of restriction enzymes slightly improved the separation of positive and negative partitions, but a more extensive 'rain effect' was observed. The high copy number of the MPRE42 amplicon is hypothesized to contribute to the saturation of the positive signal. In contrast, the porcine-specific Cytb assay achieved perfect separation of positive and negative partitions with no 'rain effect'. This assay can detect as little as 0.4 pg of pork DNA, with a sensitivity of 0.05% (w/w) in a pork-chicken mixture, proving its applicability for detecting pork in meat and meat-based products. For the MPRE42 assay, potential applications in highly degraded products such as gelatin and lard are anticipated.
Regular testing and systematic investigation play a vital role to ensure product safety. Until now, the existing food authentication techniques have been based on proteins, lipids, and nucleic acid-based assays. Among various deoxyribonucleic acid (DNA)-based methods, the recently developed Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) based bio-sensing is an innovative and fast-expanding technology. The CRISPR/Cas-9 is known as Clustered Regularly Interspaced Short Palindromic Repeats due to the flexibility and simplicity of the CRISPR/Cas9 site-specific editing tool has been applied in many biological research areas such as Gene therapy, cell line development, discovering mechanisms of disease, and drug discovery. Nowadays, the CRISPR-Cas system has also been introduced into food authentication via detecting DNA barcodes of poultry and livestock both in processed and unprocessed food samples. This review documents various DNA based approaches, in an accessible format. Future CRISPR technologies are forecast while challenges are outlined.
Glycidyl esters (GEs) and 3-monochloropropanediol esters (3-MCPDEs) are process contaminants commonly found in refined edible oils which are often added to infant formulas. The Taiwan Food and Drug Administration (TFDA) launched regulations for GEs in infant formulas that went into effect on 1 July 2021. To investigate levels of GEs and 3-MCPDEs in infant formula powder, 45 products were sampled and analysed during 2020-2021. The contents of GEs and 3-MCPDEs in formulas of different brands significantly varied, but their concentrations in all of the formulas complied with European Union (EU) regulations. Infant formulas containing palm oil had significantly higher 3-MCPDE levels in both extracted oils and milk powder than those without palm oil. Concentrations of GEs and 3-MCPDEs in infant formula powder and extracted oils were significantly lower in products from Europe than those from Australia and New Zealand. Infants aged 0-1 years in Taiwan who consumed only infant formula showed a margin of exposure (MoE) exceeding 25,000. Mean consumer exposures to 3-MCPDEs stayed below the tolerable daily intake (TDI), while high exposures at the 95th percentile (P95) exceeded the TDI by 1.7-fold. Herein, we present the changing trends in the risk assessment results of infant formula across various countries in the decade. Implementation of regulations and mitigation strategy effectively reduced the risk of infants being exposed to GEs and 3-MCPDEs through infant formula.
Poly(methyl methacrylate-vinyl imidazole bromide) (poly-MMA-IL)-grafted magnetic nanoparticles were successfully developed and applied in the micro-magnetic solid phase extraction (μ-MSPE) for 16 types of polycyclic aromatic hydrocarbons (PAHs) from tea, fried food, and grilled food samples via gas chromatography flame ionization detector (GC-FID). One variable at a time (OVAT) and response surface methodology (RSM) were used for efficient optimization. The validation method showed a good coefficient of determination (R2) ranging from 0.9901 to 0.9982 (n = 3) with linearity of 0.2 μg L-1-500 μg L-1. Detection and quantification limits were 0.06 µg L-1-0.32 µg L-1 and 0.18 µg L-1-0.97 µg L-1. Additionally, satisfactory reproducibility was attained with intra-day and inter-day precisions having RSD ranges of 3.6%-11.1%. The spiked recovery value of 16 PAHs in fried food, grilled food and tea samples obtained from the night market in Malaysia ranged from 80%-12%, respectively.
Rice is one of the crops cultivated in Malaysia, and it is the main diet for most of the population. In this study, dispersive liquid-liquid micro-extraction (DLLME) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) were used to develop, optimise and validate a reliable, easy-to-use and quick approach to detect aflatoxin B1 (AFB1), aflatoxin B2 (AFB2), aflatoxin G1 (AFG1) and aflatoxin G2 (AFG2). The extraction recoveries in DLLME were enhanced by the addition of 5% salt, utilising chloroform as the extraction solvent and acetonitrile as the dispersive solvent. The DLLME parameters - the extraction solvent volume, salt concentration and dispersive solvent volume were optimised with Box-Behnken design (BBD) and response surface methodology (RSM). Under optimised experimental conditions, excellent linearity was obtained with a limit of detection (LOD) ranging from 0.125 to 0.25 ng g-1, a limit of quantitation (LOQ) ranging from 0.25 to 0.3 ng g-1 and a correlation value (R2) of 0.990. The matrix effects were between -11.1% and 19.9%, and recoveries ranged from 87.4% to 117.3%. The optimised and validated method was used effectively to assess aflatoxins contamination in 20 commercial rice samples collected from local supermarkets in Penang, Malaysia. AFB1 was detected at 0.41-0.43 ng g-1 in two rice samples, below the regulatory limit.