Calligonum polygonoides L. also known as famine food plant, is normally consumed in times of food scarcity in India and Pakistan and also used traditionally in the management of common diseases. The present design aims to provide an insight into the medicinal potential of four solvent extracts of C. polygonoides via an assessment of its phytochemical profile, antioxidant and enzyme inhibitory potential. Phytochemical composition was estimated by deducing total bioactive constituents, UHPLC-MS secondary metabolites profile, and HPLC phenolic quantification. Antioxidant potential was determined via six methods (radical scavenging (DPPH and ABTS), reducing power (FRAP and CUPRAC), phosphomolybdenum total antioxidant capacity and metal chelation activity). Enzyme inhibitory potential was assessed against clinical enzymes (acetylcholinesterase -AChE, butyrylcholinesterase -BChE, tyrosinase, and α-amylase). The highest amounts of phenolic contents were found in chloroform extract (76.59 mg GAE/g extract) which may be attributed to its higher radical scavenging, reducing power and tyrosinase inhibition potential. The n-butanol extract containing the maximum amount of flavonoids (55.84 mg RE/g extract) exhibited highest metal chelating capacity. Similarly, the n-hexane extract was found to be most active against AChE (4.65 mg GALAE/g extract), BChE (6.59 mg GALAE/g extract), and α-amylase (0.70 mmol ACAE/g extract) enzymes. Secondary metabolite assessment of the crude methanol extract as determined by UHPLC-MS analysis revealed the presence of 24 (negative ionization mode) and 15 (positive ionization mode) secondary metabolites, with most of them belonging to phenolic, flavonoids, terpene, and alkaloid groups. Moreover, gallic acid and naringenin were the main phenolics quantified by HPLC-PDA analysis in all the tested extracts (except n-butanol extract). PCA statistical analysis was also conducted to establish any possible relationship amongst bioactive contents and biological activities. Overall, the C. polygonoides extracts could be further considered to isolate bioactive enzyme inhibitory and antioxidant natural phytocompounds.
Chemical transformations of Amadori compounds are responsible for the formation of aroma volatiles at the end of the Maillard reaction cascade, which in turn contributes to unique organoleptic characteristics of chocolate. A large amount of short peptides reported in fermented cocoa suggests the existence of a much larger variety of these flavor precursors than previously suspected. An HPLC-MS-MS study was performed on dried Malaysian cocoa beans to identify novel Amadori and Heyns compounds. In total, 34 species were found, including 26 previously unknown derived from di- and tripeptides. We illustrate how the structures were elucidated via tandem MS experiments, as well as present a comparative study on their relative quantities in samples coming from 11 countries of origin. There were significant differences between them, and discrimination was possible by principal component analysis based on Amadori content alone. However, the PCA separation could be a result of various post-harvest practices exerted among said countries.
Sodium nitrite is commonly used as a multifunctional curing ingredient in the processing of prepared dishes, especially meat products, to impart unique color, flavor and to prolong the shelf life of such products. However, the use of sodium nitrite in the meat industry has been controversial due to potential health risks. Finding suitable substitutes for sodium nitrite and controlling nitrite residue have been a major challenge faced by the meat processing industry. This paper summarizes possible factors affecting the variation of nitrite content in the processing of prepared dishes. New strategies for controlling nitrite residues in meat dishes, including natural pre-converted nitrite, plant extracts, irradiation, non-thermal plasma and high hydrostatic pressure (HHP), are discussed in detail. The advantages and limitations of these strategies are also summarized. Raw materials, cooking techniques, packaging methods, and storage conditions all affect the content of nitrite in the prepared dishes. The use of vegetable pre-conversion nitrite and the addition of plant extracts can help reduce nitrite residues in meat products and meet the consumer demand for clean labeled meat products. Atmospheric pressure plasma, as a non-thermal pasteurization and curing process, is a promising meat processing technology. HHP has good bactericidal effect and is suitable for hurdle technology to limit the amount of sodium nitrite added. This review is intended to provide insights for the control of nitrite in the modern production of prepared dishes.
Oil is one of three nutritious elements. The application of omics techniques in the field of oil science and technology is attracted increasing attention. Oilomics, which emerged as an important branch of foodomics, has been widely used in various aspects of oil science and technology. However, there are currently no articles systematically reviewing the application of oilomics. This paper aims to provide a critical overview of the advantages and value of oilomics technology compared to traditional techniques in various aspects of oil science and technology, including oil nutrition, oil processing, oil quality, safety, and traceability. Moreover, this article intends to review major issues in oilomics and give a comprehensive, critical overview of the current state of the art, future challenges and trends in oilomics, with a view to promoting the optimal application and development of oilomics technology in oil science and technology.
Liquid egg yolk (LEY) is often treated with phospholipase A2 (PLA2) to improve its emulsifying capacity and thermal stability. However, this process may allow certain pathogens to grow. The objective of this study was to evaluate the growth kinetics of mesophilic Bacillus cereus in LEY during PLA2 treatment. Samples, inoculated with B. cereus vegetative cells, were incubated isothermally at different temperatures between 9 and 50 °C to observe the bacterial growth and survival. Under the observation conditions, bacterial growth occurred between 15 and 48 °C, but not at 9 and 50 °C. The growth curves were analyzed using the USDA IPMP-Global Fit, with the no-lag phase model as the primary model in combination with either the cardinal temperatures model (CTM) or the Huang square-root model (HSRM) as the secondary model. While similar maximum growth temperatures (Tmax) were determined (48.4 °C for HSRM and 48.1 °C for CTM), the minimum growth temperature (Tmin) of the HSRM more accurately described the lower limit (9.26 °C), in contrast to 6.51 °C for CTM, suggesting that the combination of the no-lag phase model and HSRM was more suitable to describe the growth of mesophilic B. cereus in LEY. The root mean square error (RMSE) of model validation and development was <0.5 log CFU/g, indicating the combination of the no-lag phase model and HSRM could predict the growth of mesophilic B. cereus in LEY during PLA2 treatment. The results of this study may allow the food industry to choose a suitable temperature for PLA2 treatment of LEY to prevent the growth of mesophilic B. cereus.
Edible bird's nest (EBN) is a high-value health food with various nutrients and bioactive components. With increasing demand for EBN, they are often adulterated with cheaper ingredients or falsely labeled by the origin information, thus harming consumer interests. In this study, high- and low-field nuclear magnetic resonance (HF/LF-NMR) technology combined with multivariate statistical analysis was used to identify the geographical marker of EBN from different origins and authenticate the adulterated EBN with various adulterants at different adulteration rates. Authentic EBN samples from Malaysia were used to simulate adulteration using gelatin (GL), agar (AG) and starch (ST) at 10 %, 20 %, 40 %, 60 %, 80 %, and 100 % w/w, respectively. The results showed significant differences in composition among EBN from different origins, with isocaproate and citric acid serving as geographical markers for Malaysia and Vietnam, respectively. Leucine, glutamic acid, and N-acetylglycoprotein serving as geographical markers for Indonesia. In addition, PLS model further verified the accuracy of origin identification of EBN. The LF-NMR results of adulteration EBN showed a linear correlation between the transverse relaxation (T2, S2) and the adulterated ratio. The OPLS-DA based on T2 spectra could accurately identify authentic EBN from adulterated with GL, AG and ST at 40 %, 20 %, and 20 %, respectively. Fisher discrimination model was able to differentiate at 20 %, 20 %, and 40 %, respectively. These results show that the 1H NMR combined with multivariate statistical analysis method could be a potential tool for the detection of origin and adulteration of EBN.
Burkholderia cepacia (B. cepacia) is an aerobic Gram-negative bacillus found in various aquatic environments and can cause food contamination. We investigated the photodynamic antibacterial effects of food additive curcumin combined with EDTA on B. cepacia. We found a ~4-log reduction in B. cepacia viability when photo-irradiated with curcumin at 50 μM by blue LED light (16 mW/cm2) for 30 min with 0.4% (w/v) EDTA. Moreover, the bacterial morphological alterations and the leakage of intracellular contents were observed after photodynamic treatment. There were also obvious genomic DNA cleavage and a general loss of bacterial proteins assigned to large-scale protein degradation after photodynamic inactivation treatment. Collectively, curcumin in combination with EDTA illuminated by blue LED is a potential candidate for photodynamic inactivation of B. cepacia.
Fish oil-in-water emulsions containing fish oil, thiol-modified β-lactoglobulin (β-LG) fibrils, chitosan and maltodextrin were fabricated using a high-energy method. The results showed that chitosan coating induced charge reversal; denoting successful biopolymers complexation. A significantly (p<0.05) larger droplet size and lower polydispersity index value, attributed to the thicker chitosan coating at the oil-water interface, were observed. At high chitosan concentrations, the cationic nature of chitosan strengthened the electrostatic repulsion between the droplets, thus conferring high oxidative stability and low turbidity loss rate to the emulsions. The apparent viscosity of emulsions stabilized using thiol-modified β-LG fibrils-chitosan complex was higher than those stabilized using β-LG fibrils alone, resulting in the former's higher creaming stability. Under thermal treatments (63°C and 100°C), emulsions stabilized using thiol-modified β-LG fibrils-chitosan complex possessed higher heat stability as indicated by the consistent droplet sizes observed. Chitosan provided a thicker protective layer that protected the oil droplets against high temperature. Bridging flocculation occurred at low chitosan concentration (0.1%, w/w), as revealed through microscopic observations which indicated the presence of large flocs. All in all, this work provided us with a better understanding of the application of protein fibrils-polysaccharide complex to produce stable emulsion.
Monoglycerides (MGs) and phytosterols (PS) are known to form firm oleogels with liquid oil. However, the oleogels are prone to undergo polymorphic transition over time that lead to crystals' aggregation thus, compromises physical properties. Thus, we combined MGs with PS to control the crystallization and modify the morphology of the combination oleogels, as both components are reported to interact together. The oleogels were prepared at different ratio combinations and characterized in their rheological, thermal, morphology, and diffraction properties. The results showed that the 8:2 MGP:PS exhibited higher storage modulus (G') than the MGP mono-component. The combination oleogels exhibited effects on the crystallization and polymorphic transition. Consequently, the effects led to change in the morphology of the combination oleogels which was visualized using optical and electron microscope. The resultant effect on the morphology is associated with crystal defect. Due to observable crystals of MGP and PS, it is speculated that the combination oleogels formed a mixed crystal system. This was confirmed with diffraction analysis in which the corresponding peaks from MGP and PS were observed in the combination oleogels. However, the 8:2 oleogel exhibited additional peak at 35.41Å. Ultimately, the 8:2 was the optimum combination observed in our study. Interestingly, this combination is inspired by nature as sterols (phytosterols) are natural component of lipid membrane whilst MGP has properties similar to phospholipids. Hence, the results of our study not only beneficial for oil structuring, but also for the fields of biophysical and pharmaceutical.
Pineapple (Ananas comosus) is a tropical fruit that is highly relished for its unique aroma and sweet taste. It is renowned as a flavourful fruit since it contains a number of volatile compounds in small amounts and complex mixtures. Pineapple is also a rich source of minerals and vitamins that offer a number of health benefits. Ranked third behind banana and citrus, the demand for pineapple has greatly increased within the international market. The growth of the pineapple industry in the utilisation of pineapple food-based processing products as well as waste processing has progressed rapidly worldwide. This review discusses the nutritional values, physicochemical composition and volatile compounds, as well as health benefits of pineapples. Pineapple contains considerable amounts of bioactive compounds, dietary fiber, minerals, and nutrients. In addition, pineapple has been proven to have various health benefits including anti-inflammatory, antioxidant activity, monitoring nervous system function, and healing bowel movement. The potential of food products and waste processing of pineapples are also highlighted. The future perspectives and challenges with regard to the potential uses of pineapple are critically addressed. From the review, it is proven that pineapples have various health benefits and are a potential breakthrough in the agricultural and food industries.
Basa catfish is a good source for fish oil extraction, which was believed to have good thermo-oxidative stability because of its similar fatty acid composition to that of palm olein (PO). The thermo-oxidative stability of PO, basa catfish oil (FO), and palm olein-basa fish oil blend (PO-FO; ratio 1:1) was evaluated after 75 frying cycles. No significant difference was observed in p-anisidine value, TOTOX value, conjugated trienes, monomeric oxidized triacylglycerols, and free fatty acids concentration after frying. Moreover, compared to PO, FO exhibited lighter color, lower acid value, conjugated dienes, polymerized triacylglycerol, and total polar content. The PO-FO blend also demonstrated a more favorable frying stability compared to the other two frying systems. These findings indicated that FO could be proposed as a promising alternative to common PO, and its blending with other vegetable oils at an appropriate ratio might improve the overall oil frying quality for future industrial applications.
The aim of this study was to develop formulations to produce lycopene nanodispersions and to investigate the effects of the homogenization pressure on the physicochemical properties of the lycopene nanodispersion. The samples were prepared by using emulsification-evaporation technique. The best formulation was achieved by dispersing an organic phase (0.3% w/v lycopene dissolved in dichloromethane) in an aqueous phase (0.3% w/v Tween 20 dissolved in deionized water) at a ratio of 1:9 by using homogenization process. The increased level of homogenization pressure to 500bar reduced the particle size and lycopene concentration significantly (p<0.05). Excessive homogenization pressure (700-900bar) resulted in large particle sizes with high dispersibility. The zeta potential and turbidity of the lycopene nanodispersion were significantly influenced by the homogenization pressure. The results from this study provided useful information for producing small-sized lycopene nanodispersions with a narrow PDI and good stability for application in beverage products.
Nutraceutical supplements provide health benefits, such as fulfilling the lack of nutrients in the human body or being utilized to treat or cure certain diseases. As the world population is growing, certain countries are experiencing food crisis challenges, causing natural foods are not sustainable to be used for nutraceutical production because it will require large-scale of food supply to produce enriched nutraceutics. The high demand for abundant nutritional compounds has made microalgae a reliable source as they can synthesize high-value molecules through photosynthetic activities. However, some microalgae species are limited in growth and unable to accumulate a significant amount of biomass due to several factors related to environmental conditions. Therefore, adding nanoparticles (NPs) as a photocatalyst is considered to enhance the yield rate of microalgae in an energy-saving and economical way. This review focuses on the composition of microalgal biomass for nutraceutical production, the health perspectives of nutritional compounds on humans, and the application of nanotechnology on microalgae for improved production and harvesting. The results obtained show that microalgal-based compounds indeed have better nutrients content than natural foods. However, nanotechnology must be further comprehended to make them non-hazardous and sustainable.
Four types of cheeses were prepared included plain- cheese (control), Codonopsis pilosula (CP)- cheese, plain- cheese with fish collagen (FC; control) and CP- cheese with FC. The effects of cheese samples on acidification, proteolysis of milk proteins using three methods (cadmium-ninhydrin method, O-phthaldialdehyde (OPA) assay, and electrophoresis assay), and angiotensin-converting enzyme (ACE)-inhibitory activity were investigated during 0, 2, & 4 weeks of ripening. In addition, the sensory evaluation was also investigated during 0, 2, 4, & 8 weeks of ripening. The presence of FC in CP- cheese increased the numbers of free amino acids (FAA) at 0 and 2 weeks. The addition of CP both in the presence and absence of FC affected positively (p
Edible bird's nest (EBN) is an expensive animal bioproduct due to its reputation as a food and delicacy with diverse medicinal properties. One kilogram of EBN costs ~$6000 in China. EBN and its products are consumed in mostly Asian countries such as China, Hong Kong, Taiwan, Singapore, Malaysia, Indonesia, Vietnam and Thailand, making up almost 1/3 of world population. The rapid growth in EBN consumption has led to a big rise in the trade scale of its global market. Presently, various fake materials such as tremella fungus, pork skin, karaya gum, fish swimming bladder, jelly, agar, monosodium glutamate and egg white are used to adulterate EBNs for earning extra profits. Adulterated or fake EBN may be hazardous to the consumers. Thus, it is necessary to identify of the adulterants. Several sophisticated techniques based on genetics, immunochemistry, spectroscopy, chromatography and gel electrophoresis have been used for the detection of various types of adulterants in EBN. This article describes the recent advances in the authentication methods for EBN. Different genetic, immunochemical, spectroscopic and analytical methods such as genetics (DNA) based techniques, enzyme-linked immunosorbent assays, Fourier transform infrared and Raman spectroscopic techniques, and chromatographic and gel electrophoretic methods have been discussed. Besides, significance of the reported methods that might pertain them to applications in EBN industry has been described. Finally, efforts have been made to discuss the challenges and future perspectives of the authentication methods for EBN.
The increase in rice consumption and demand for high-quality rice is impacted by the growth of socioeconomic status in developing countries and consumer awareness of the health benefits of rice consumption. The latter aspects drive the need for rapid, low-cost, and reliable quality assessment methods to produce high-quality rice according to consumer preference. This is important to ensure the sustainability of the rice value chain and, therefore, accelerate the rice industry toward digital agriculture. This review article focuses on the measurements of the physicochemical and sensory quality of rice, including new and emerging technology advances, particularly in the development of low-cost, non-destructive, and rapid digital sensing techniques to assess rice quality traits and consumer perceptions. In addition, the prospects for potential applications of emerging technologies (i.e., sensors, computer vision, machine learning, and artificial intelligence) to assess rice quality and consumer preferences are discussed. The integration of these technologies shows promising potential in the forthcoming to be adopted by the rice industry to assess rice quality traits and consumer preferences at a lower cost, shorter time, and more objectively compared to the traditional approaches.
Production and extraction systems of algal protein and handling process of functional food ingredients need to control several parameters such as temperature, pH, intensity, and turbidity. Many researchers have investigated the Internet of Things (IoT) approach for enhancing the yield of microalgae biomass and machine learning for identifying and classifying microalgae. However, there have been few specific studies on using IoT and artificial intelligence (AI) for production and extraction of algal protein as well as functional food ingredients processing. In order to improve the production of algal protein and functional food ingredients, the implementation of smart system is a must to have real-time monitoring, remote control system, quick response to sudden events, prediction and characterisation. Techniques of IoT and AI are expected to help functional food industries to have a big breakthrough in the future. Manufacturing and implementation of beneficial smart systems are important to provide convenience and to increase the efficiency of work by using the interconnectivity of IoT devices to have good capturing, processing, archiving, analyzing, and automation. This review investigates the possibilities of implementation of IoT and AI in production and extraction of algal protein and processing of functional food ingredients.
Alternanthera sessilis (red) (ASR) is an edible herbal plant with many beneficial health effects. This study aimed to investigate the antioxidant components and antioxidant activities of the edible leaves and stems of ASR extracted using solvent of varying polarities namely water, ethanol, ethyl acetate and hexane. ASR leaf extracts showed higher in both antioxidant components and activities than the stem extracts. Among the antioxidant components, the ethanol leaf extract showed higher phenolic (77.29 ± 1.02 mg GAE/g extract) content while the ethyl acetate leaf extract was rich in flavonoids (157.44 ± 10.19 mg RE/g extract), carotenoids (782.97 ± 10.78 mg BE/g extract) and betalains (betanin: 67.08 ± 0.49 mg/g extract; amaranthin: 93.94 ± 0.68 mg/g extract and betaxanthin: 53.92 ± 0.88 mg/g extract). Nevertheless, the ethanol leaf extract showed the highest DPPH radical scavenging activity and ABTS radical cation scavenging activity. It also exhibited highest ferric reducing activity among all the extracts. Four polyphenolic compounds from ASR leaf, namely ferulic acid, rutin, quercetin and apigenin, were identified and quantified using ultra high performance liquid chromatography. The existence of these compounds was further verified using tandem mass spectrometry. These current results indicate that ASR leaf particularly the ethanol extract has the potential to be exploited as a source of natural antioxidants.
In this study the possibility of replacing current surfactants in chocolate formulations with natural lipids extracted from spinach leaf (SPLIP) or spinach chloroplast (CH.SPLIP) was evaluated. SPLIP and CH.SPLIP were extracted with chloroform/methanol following enzyme deactivation with hot isopropanol. Results showed a higher extraction yield for SPLIP while glycolipids were more concentrated in CH.SPLIP. Sugar/oil suspensions with dispersed volume fractions of 0.28, 0.33 and 0.37 containing 0.1% to 0.7% (w/w) surfactant (SPLIP, CH.SPLIP, lecithin and PGPR as commercial references) based on oil phase were prepared and analyzed in shear rheology. Apparent viscosity at 40 s-1 was significantly lower for the natural surfactants compared to lecithin at 0.5-0.7% (w/w) addition. With regard to yield stress, taken as the shear stress at 5 s-1, both natural surfactants showed comparable performance to PGPR at 0.3% to 0.7% addition. As SPLIP and CH.SPLIP behaved similar (p > 0.05), SPLIP, due to higher extraction yield, would be the preferred choice for application in chocolate matrices.
The rheological properties, microstructure, textural properties, colour and droplet size distribution of mayonnaise-like emulsion models prepared using 10-30wt.% of palm olein-based diacylglycerol (POL-DAG) oil were compared with those of the control (100wt.% VCO) model. There were significant (P<0.05) differences in the particle size distribution of the oil droplets, the textural properties, and the rheological properties of the various emulsion models. The rheological analysis included the determination of the flow curves, yield stress, thixotropy, apparent viscosity, and viscoelastic parameters. The concentrated oil-in-water (O/W) emulsion with 30wt.% POL-DAG substitution exhibited high thixotropy. The POL-DAG content had a substantial effect on the rheological properties of yield stress, storage modulus (G') and loss modulus (G″). The pseudoplastic behaviour of the emulsions was demonstrated. The size of the particles in the 30% POL-DAG-substituted emulsion was dramatically increased after one day and 30days of storage. All of the emulsion samples with POL-DAG substituted for VCO showed a relatively non-uniform bimodal droplet size distribution after one day of storage. In general, substitution of 10-20wt.% POL-DAG oil is appropriate for preparing O/W emulsions that had flow curves and textural properties similar to those of the control sample.