This review discussed the origin, manufacturing process, chemical composition, factors affecting quality and health benefits of matcha (Camellia sinensis), and the application of chemometrics and multi-omics in the science of matcha. The discussion primarily distinguishes between matcha and regular green tea with processing and compositional factors, and demonstrates beneficial health effects of consuming matcha. Preferred Reporting Items for Systematic Reviews and Meta-Analyses was adopted to search for relevant information in this review. Boolean operators were incorporated to explore related sources in various databases. Notably, climate, cultivar, maturity of tea leaves, grinding process and brewing temperature impact on the overall quality of matcha. Besides, sufficient shading prior to harvesting significantly increases the contents of theanine and chlorophyll in the tea leaves. Furthermore, the ground whole tea leaf powder delivers matcha with the greatest benefits to the consumers. The health promoting benefits of matcha are mainly contributed by its micro-nutrients and the antioxidative phytochemicals, specifically epigallocatechin-gallate, theanine and caffeine. Collectively, the chemical composition of matcha affected its quality and health benefits significantly. To this end, more studies are required to elucidate the biological mechanisms of these compounds for human health. Chemometrics and multi-omics technologies are useful to fill up the research gaps identified in this review.
Edible bird's nest (EBN) is a precious food made from the solidified saliva of swiftlets. EBN from three types of origin, namely production, swiftlet species and geographical were characterised based on its nutritional composition, physicochemical properties and antioxidant properties. Proximate composition, total phenolic content (TPC) and antioxidant activities were determined following official methods, while mineral and heavy metal contents were obtained by respective atomic adsorption spectrometry (AAS) and inductively coupled plasma-mass spectrometry (ICP-MS). Amino acids profile and sialic acid were determined using high performance liquid chromatography (HPLC). Calcium and sodium were the major elements in EBN samples at averages of 17,267 mg/kg and 13,681 mg/kg, respectively. Despite protein contents were not significantly different; interestingly the total amino acids in A. fuciphagus EBN, 64.57 g/100 g was found to be 23% higher than in A. maximus EBN. EBN from house, A. fuciphagus and Peninsular Malaysia had greater antioxidant activities, 2.33-3.49 mg AAE/g and higher sialic acid, 13.57 g/100 g while those from cave, A. maximus and East Malaysia contained more minerals like calcium and magnesium. The 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity and ferric ion reducing antioxidant power (FRAP) of house, A. fuciphagus and Peninsular Malaysia EBNs were approximately 2 times greater than the others. All samples were complied with the Malaysian Standard MS 2334:2011, except for mercury and nitrite. The overall findings suggest that the quality of EBN was varied following the production, species and geographical origins.
Food fermentation is a food processing technology that utilizes the growth and metabolic activity of microorganisms for the stabilization and transformation of food materials. Notwithstanding, the technology has evolved beyond food preservation into a tool for creating desirable organoleptic, nutritional, and functional attributes in food products. This narrative review outlines a compilation of traditional fermented foods which available in the South East Asia (SEA) regions as a source vehicle for non-dairy probiotics. The nutritional values of traditional fermented foods are well-appreciated, especially in the resource-poor regions. The sensory and organoleptic preferences of traditional fermented foods as means of dietary routine variations were demonstrated. Furthermore, the evidence underlying its potent impacts on public health promotion and disease prevention is outlined. Lastly, the challenges and future prospects for the integration of traditional fermented foods practice are elucidated.
The meat industry is continuously facing challenges with food safety, and quality losses caused by thermal processing. This systematic review reports recent clean label approaches in high-pressure production of meat. A literature search was performed using Scopus, Web of Science, PubMed, and Springer databases for studies published in 2018-2021. In this regard, 69 articles were assessed out of 386 explored research articles in the identified stage. The findings indicate that most of the earlier work on high-pressure processing (HPP) focused on physicochemical and sensorial meat quality rather than providing nutritional aspects and clean-label solutions. However, few advanced studies report effective and innovative solutions to develop low salt/fat, and reduced nitrite for raw and cured meat products. HPP could help on increasing the shell life by five times in meat products; however, it depends on the formulation and packaging, etc. HPP can also preserve nutrients by using this non-thermal technology and reduce food waste as once the shelf life of products is known, it easily reduces the shrinkage in the marketplace. This review explores the latest trend of experimental research in high-pressure processing alone, or multi-hurdle techniques employed to increase the effect of clean-label ingredients for enhanced meat safety/quality.
Edible seaweeds are a good source of antioxidants, dietary fibers, essential amino acids, vitamins, phytochemicals, polyunsaturated fatty acids, and minerals. Many studies have evaluated the gelling, thickening and therapeutic properties of seaweeds when they are used individually. This review gives an overview on the nutritional, textural, sensorial, and health-related properties of food products enriched with seaweeds and seaweed extracts. The effect of seaweed incorporation on properties of meat, fish, bakery, and other food products were highlighted in depth. Moreover, the positive effects of foods enriched with seaweeds and seaweed extracts on different lifestyle diseases such as obesity, dyslipidemia, hypertension, and diabetes were also discussed. The results of the studies demonstrated that the addition of seaweeds, in powder or extract form, can improve the nutritional and textural properties of food products. Additionally, low-fat products with less calories and less saturated fatty acids can be prepared using seaweeds. Moreover, the addition of seaweeds also affected the health properties of food products. The results of these studies demonstrated that the health value, shelf-life and overall quality of foods can be improved through the addition of either seaweeds or seaweed extracts.
Anagallis arvensis (L.) is a wild edible food plant that has been used in folklore as a natural remedy for treating common ailments. This study aimed to explore the biochemical properties and toxicity of methanol (MeOH) and dichloromethane (DCM) extracts of A. arvensis (aerial and root parts). Bioactive contents were assessed spectrophotometrically, and the secondary metabolites were identified by UHPLC-MS analysis. DPPH, ABTS, FRAP, CUPRAC, phosphomolybdenum, and metal chelating assays were employed to assess antioxidant activity. Inhibitory potential against key enzymes (α-glucosidase, urease, lipoxygenase (LOX), acetylcholinesterase (AChE), and butyrylcholinesterase (BChE)) were also assessed. MTT assay was employed to test toxicity against SW-480, MDA-MB-231, CaSki, MCF-7, and DU-145 cancer cell lines. Methanolic extracts showed highest phenolic (aerial-MeOH: 27.5 mg GAE/g extract; root-MeOH: 21.17 mg GAE/g extract) and flavonoid (aerial-MeOH: 26.15 mg QE/g extract; root-MeOH: 19.07 mg QE/g extract) contents, and potent antioxidant activities. The aerial-MeOH extract was most potent for DPPH (IC50: 231 ug/mL), ABTS (131.12 mg TE/g extract), FRAP (82.97 mg TE/g extract), and CUPRAC (137.15 mg TE/g extract) antioxidant assays. All extracts were cytotoxic towards tested cancer cells with IC50 values ranging from 12.57 to 294.5 µg/mL and conferred a comparatively strong inhibition against α-glucosidase (aerial-DCM extract showed the highest inhibition against α-glucosidase with IC50 value of 20.97 µg /mL), while aerial extracts were also considerably active against BChE (aerial-MeOH IC50: 224.63 µg /mL), LOX (aerial-DCM IC50: 385.7 µg /mL). Likewise, aerial-MeOH extract was most active against urease enzyme (IC50: 129.72 µg /mL). UHPLC-MS investigation of methanolic extracts showed the existence of important phenolics, flavonoids, and saponins, including methyl gallte, quercetin, lanceoletin, and balanitesin, amongst others. Moreover, principal component analysis (PCA) highlighted the correlation amongst bioactive contents and observed biological activities. A. arvensis extracts could be regarded as a natural source of bioactive antioxidants, enzyme inhibitors and anticancer agents and can be further investigated as a lead source for food and pharmaceutical products. However, further studies to isolate, purify, and to characterize its bioactive phytochemicals are needed.
Fruit of salak (Salacca zalacca) is traditionally used and commercialized as an antidiabetic agent. However, the scientific evidence to prove this traditional use is lacking. This research was aimed to evaluate the metabolic changes of obese-diabetic (OBDC) rats treated with S. zalacca fruit extract using proton-nuclear magnetic resonance (1H NMR)-based metabolomics approach. This research presents the first report on the in vitro antidiabetic effect of S. zalacca fruits extract using this approach. The obtained results indicated that the administration of 400 mg/kg bw of 60% ethanolic S. zalacca extract for 6 weeks significantly decreased the blood glucose level and normalized the blood lipid profile of the OBDC rats. The potential biomarkers in urine were 2-oxoglutarate, alanine, leucine, succinate 3-hydroxybutyrate, taurine, betaine, allantoin, acetate, dimethylamine, creatine, creatinine, glucose, phenyl-acetylglycine, and hippurate. Based on the data obtained, the 60% ethanolic extract could not fully improved the metabolic complications of diabetic rats. The extract of S. zalacca fruit was able to decrease the ketones bodies as 3-hydroxybutyrate and acetoacetate. It also improved energy metabolism, involving glucose, acetate, lactate, 2-hydroxybutyrate, 2-oxoglutarate, citrate, and succinate. Moreover, it decreased metabolites from gut microflora, including choline. This extract had significant effect on amino acid metabolism, metabolites from gut microflora, bile acid metabolism and creatine. The result can further support the traditional claims of S. zalacca fruits in management of diabetes. This finding might be valuable in understanding the molecular mechanism and pharmacological properties of this medicinal plant for managing diabetes mellitus.
A two-step solution based on the boundary conditions of Crank's equations for mass transfer in a film was developed. Three driving factors, the diffusion (D), partition (Kp,f) and convective mass transfer coefficients (h), govern the sorption and/or desorption kinetics of migrants from polymer films. These three parameters were simultaneously estimated. They provide in-depth insight into the physics of a migration process. The first step was used to find the combination of D, Kp,f and h that minimized the sums of squared errors (SSE) between the predicted and actual results. In step 2, an ordinary least square (OLS) estimation was performed by using the proposed analytical solution containing D, Kp,f and h. Three selected migration studies of PLA/antioxidant-based films were used to demonstrate the use of this two-step solution. Additional parameter estimation approaches such as sequential and bootstrap were also performed to acquire a better knowledge about the kinetics of migration. The proposed model successfully provided the initial guesses for D, Kp,f and h. The h value was determined without performing a specific experiment for it. By determining h together with D, under or overestimation issues pertaining to a migration process can be avoided since these two parameters are correlated.
Migration studies of chemicals from contact materials have been widely conducted due to their importance in determining the safety and shelf life of a food product in their packages. The US Food and Drug Administration (FDA) and the European Food Safety Authority (EFSA) require this safety assessment for food contact materials. So, migration experiments are theoretically designed and experimentally conducted to obtain data that can be used to assess the kinetics of chemical release. In this work, a parameter estimation approach was used to review and to determine the mass transfer partition and diffusion coefficients governing the migration process of eight antioxidants from poly(lactic acid), PLA, based films into water/ethanol solutions at temperatures between 20 and 50°C. Scaled sensitivity coefficients were calculated to assess simultaneously estimation of a number of mass transfer parameters. An optimal experimental design approach was performed to show the importance of properly designing a migration experiment. Additional parameters also provide better insights on migration of the antioxidants. For example, the partition coefficients could be better estimated using data from the early part of the experiment instead at the end. Experiments could be conducted for shorter periods of time saving time and resources. Diffusion coefficients of the eight antioxidants from PLA films were between 0.2 and 19×10-14m2/s at ~40°C. The use of parameter estimation approach provided additional and useful insights about the migration of antioxidants from PLA films.
Sargassum brown seaweed is well-known to contain several bioactive compounds which exhibit various biological activities, including anti-inflammatory and antioxidant activity. Lipophilic extracts and fractions of Sargassum were reported to possess promising anti-inflammatory activity. This study, therefore, aims to evaluate the anti-inflammatory and antioxidant activity of Sargassum cristaefolium crude lipid extract and its fractions. The brown seaweed was obtained from Awur Bay, Jepara - Indonesia. Crude lipid fractionation was performed using normal phase column chromatography, and three different fractions (dichloromethane, acetone, methanol) were produced. The results showed that treatment of acetone fraction exerted strongest nitric oxide inhibition in lipopolysaccharide-induced RAW 264.7 cells, both in pre-incubated and co-incubated cell culture models. This outcome was in accordance with its 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity and ferric reducing antioxidant power (FRAP). Metabolite profiling of lipid fractions was performed by ultra-high-performance liquid chromatography electrospray ionization orbitrap tandem mass spectrometry, while the orthogonal projection to latent structures analysis was conducted to determine some features with significant correlation to the bioactivity. There were 14 feature candidates considered from both positive and negative ionization mode datasets. Seven out of them were putatively identified as pheophytin a (1), all-trans fucoxanthin (2), 132-hydroxy-pheophytin a (3), pheophorbide a (4), 1-hexadecanoyl-2-(9Z-octadecenoyl)-3-O-β-D-galactosyl-sn-glycerol (6), 1-(5Z,8Z,11Z,14Z,17Z-eicosapentaenoyl)-2-(9Z,12Z,15Z-octadecatrienoyl)-3-O-β-D-galactosyl-sn-glycerol (10), and 1-(9Z,12Z,15Z-octadecatrienoyl)-2-(6Z,9Z,12Z,15Z-octadecatetraenoyl)-3-O-β-D-galactosyl-sn glycerol (12).
In this study, we propose an easy approach by combining the Fourier transform infrared and attenuated total reflectance (FTIR-ATR) spectroscopy together with chemometrics analysis for rapid detection and accurate quantification of five adulterants such as fructose, glucose, sucrose, corn syrup and cane sugar in stingless bees (Heterotrigona itama) honey harvested in Malaysia. Adulterants were classified using principal component analysis and soft independent modeling class analogy, where the first derivative of the spectra in the wavenumber range of 1180-750cm-1 was utilized. The protocol could satisfactorily discriminate the stingless bees honey samples that were adulterated with the concentrations of corn syrup above 8% (w/w) and cane sugar over 2% (w/w). Feasibility of integrating FTIR-ATR with chemometrics for precise quantification of the five adulterants was affirmed using partial least square regression (PLSR) analysis. The study found that optimal PLSR analysis achieved standard error of calibrations and standard error of predictions within an acceptable range of 0.686-1.087% and 0.581-1.489%, respectively, indicating good predictive capability. Hence, the method developed here for detecting and quantifying adulteration in H. itama honey samples is accurate and rapid, requiring only 7-8min to complete as compared to 3h for the standard method, AOAC method 998.12.
Diacylglycerol (DAG) is commonly known as one of the precursors for 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) formation. Besides, 3-MCPDE and GE are heat-induced contaminants which can be formed in fat-containing baked products during the baking process. This study attempted to replace the conventional palm-based shortening (SH) with a healthier fat, namely soybean oil-based diacylglycerol stearin (SDAG) in producing biscuits. The effects of different baking temperatures (200, 210 and 220 °C) and SDAG:SH fat blend ratios (0:100, 60:40 (D64S), 80:20 (D82S), 100:0, w/w) towards the biscuits' physical properties were evaluated. Moreover, the oxidative stability, 3-MCPDPE and GE formation in the fats extracted from the biscuits were also investigated. SDAG-produced biscuit showed slight reductions in the spread ratio compared to the SH-produced biscuit. The elevated baking temperatures resulted in biscuits with increased hardness and low moisture content. Pure SDAG and the other fat blends exhibited significant (p
The aim of this study was to develop formulations to produce lycopene nanodispersions and to investigate the effects of the homogenization pressure on the physicochemical properties of the lycopene nanodispersion. The samples were prepared by using emulsification-evaporation technique. The best formulation was achieved by dispersing an organic phase (0.3% w/v lycopene dissolved in dichloromethane) in an aqueous phase (0.3% w/v Tween 20 dissolved in deionized water) at a ratio of 1:9 by using homogenization process. The increased level of homogenization pressure to 500bar reduced the particle size and lycopene concentration significantly (p<0.05). Excessive homogenization pressure (700-900bar) resulted in large particle sizes with high dispersibility. The zeta potential and turbidity of the lycopene nanodispersion were significantly influenced by the homogenization pressure. The results from this study provided useful information for producing small-sized lycopene nanodispersions with a narrow PDI and good stability for application in beverage products.
Four types of cheeses were prepared included plain- cheese (control), Codonopsis pilosula (CP)- cheese, plain- cheese with fish collagen (FC; control) and CP- cheese with FC. The effects of cheese samples on acidification, proteolysis of milk proteins using three methods (cadmium-ninhydrin method, O-phthaldialdehyde (OPA) assay, and electrophoresis assay), and angiotensin-converting enzyme (ACE)-inhibitory activity were investigated during 0, 2, & 4 weeks of ripening. In addition, the sensory evaluation was also investigated during 0, 2, 4, & 8 weeks of ripening. The presence of FC in CP- cheese increased the numbers of free amino acids (FAA) at 0 and 2 weeks. The addition of CP both in the presence and absence of FC affected positively (p
Food allergen labelling is mandatory and regulated whilst precautionary allergen labelling (PAL) remains voluntary in most countries. It is the aim of this study to identify the food allergens declared in food products sold in a developing country and to what extent food allergens and PAL are emphasised in the products. A total of 505 food and beverages (snacks, baked goods, confectionary, baby food, condiments & jams, beverages, powder & paste, instant food, chilled & frozen food and canned food) were evaluated in Malaysia. Soybean represents the largest group of food allergen declared in labels, followed by wheat and milk products. Thirteen variations of contains statement were found with "Contains [allergen(s)]" being the most common (55.02%). There were 22 different types of "may contain" statements with 'May contain traces of [allergen(s)]' being the most common advice labelling used (55.41%). Different font type or emphasis such as brackets (51.57%) and bold font (33.86%) were used to inform consumers about presence of allergens. The national regulations on food allergen labelling are then critically contrasted with other Asian countries and the EU Regulation No. 1169/2011, which represents one of the most stringent food regulations in the world. Improving current allergen labelling limitations and practices would be of great benefit to consumers to prevent risk of food hypersensitivity.
The aim of this study was to assess food allergen knowledge, attitude and self-reported practices among consumers in Malaysia. An online survey was conducted and data were analysed using descriptive statistics and exploratory factor analysis. A model linking food allergen knowledge and attitude and their direct effects on practices were confirmed using structural equation modelling (SEM). Consumers demonstrated moderate food allergen knowledge in this study but scored highly in their attitude towards food allergens. Although participants scored moderately in food allergen knowledge, this does not necessarily translate into practices. There is a possibility that an increase in food allergen knowledge can increase optimistic bias or a sense of over-confidence to manage allergen risks. Consumers' attitude towards food allergens has a positive and significant influence on practices. A positive attitude represents personal beliefs and reflects the level of motivation and care required to manage food allergens effectively. There was insignificant relationship between food allergen knowledge and attitude. This demonstrates a need to tailor targeted risk communication and learning strategies to influence consumers' practices.
Species substitution, the use of a low value fish in place of a high value fish, is the biggest problem in international trade and the leading cause of fraud in the fisheries arena sector. Current DNA barcoding systems have partly solved this problem but also failed in many instances to amplify PCR targets from highly processed products because of the degradation of a longer barcode marker (~650bp). In the present study, a novel mini barcode marker (295bp) was developed to discriminate fish species in raw and processed states forms. The barcode primers were cross-tested against 33 fish species and 15 other animal species and found to be universal for all the tested fish varieties. When 20 commercial fish products of five different categories were screened, all commercial fish sample yielded positive bands for the novel fish barcode. PCR product was sequenced to retrieve the species IDs that reflected 55% (11/20) of Malaysian fish products were mislabeled.
Kenaf (Hibiscus cannabinus L.) seed is a non-conventional edible oilseed that can be valorized into various food products. There is a recent discovery of kenaf seed beverage (KSB) potential as a novel plant-based beverage. KSB had less crude protein than soybean (SB)but more carbohydrate, magnesium, and phosphorus contents.Levels of crude fat, phytates, oxalates, total saponins, and lipid peroxidability in KSB were lower than SB. Sugar content between KSB and SB were comparable, while antioxidant properties of KSB were superior. Ultra-high performance liquid chromatography-mass spectrometry (UHPLC-MS) analysis detected gluconic acid, citric acid, palmitic acid, oleic acid, and 13-hydroxyoctadecadienoic acid in both KSB and SB. Considering its novelty, acute and subacute oral toxicity assessments in male Sprague Dawley rats were conducted. The acute toxicity assessment was performed at a single dose of 9.2 ml/kg body weight of KSB. In the following subacute toxicity assessment, different groups of rats consumed different doses of KSB (3.1, 6.1, and 9.2 ml/kg body weight) daily for 28 days. Rats presented normal behavioral and physiological states in both toxicity studies. Growth, food and water intakes, organ weight, and hematological parameters were unaffected. No mortality was reported. Several alterations in serum biochemical parameters were within the normal range, and unassociated with histopathological changes. The oral lethal dose (LD50) and the no-observed-adverse-effect-level (NOAEL) of KSB in rats was greater than 9.2 ml/kg (=1533 mg/kg) body weight. Interestingly, KSB exhibited comparable effects with soybean beverage (SB) on high-density lipoprotein cholesterol and triglycerides which worth further research Follow-up toxicity assessments in animals and human trials are also recommended to ascertain its long term safety.
Nutraceutical supplements provide health benefits, such as fulfilling the lack of nutrients in the human body or being utilized to treat or cure certain diseases. As the world population is growing, certain countries are experiencing food crisis challenges, causing natural foods are not sustainable to be used for nutraceutical production because it will require large-scale of food supply to produce enriched nutraceutics. The high demand for abundant nutritional compounds has made microalgae a reliable source as they can synthesize high-value molecules through photosynthetic activities. However, some microalgae species are limited in growth and unable to accumulate a significant amount of biomass due to several factors related to environmental conditions. Therefore, adding nanoparticles (NPs) as a photocatalyst is considered to enhance the yield rate of microalgae in an energy-saving and economical way. This review focuses on the composition of microalgal biomass for nutraceutical production, the health perspectives of nutritional compounds on humans, and the application of nanotechnology on microalgae for improved production and harvesting. The results obtained show that microalgal-based compounds indeed have better nutrients content than natural foods. However, nanotechnology must be further comprehended to make them non-hazardous and sustainable.
Extract from papaya leaves, a waste material from fruit farms in Malaysia was previously reported to possess remarkable antioxidative activities. In this study, papaya leaf extract was separated into fractions of different polarities [petroleum ether (PE), ethyl acetate (EA), n-butanol (NB) and water (W) fractions]. The aim of this research was to determine the most active fraction in terms of its chemopreventive effects towards oxidative stress and the chemical constituents involved. The cytoprotective nature of the papaya fractions was observed against t-BOOH-induced oxidative stress on HepG2 liver cell line. ROS assay indicated that only PE and EA effectively reduced the increment of radical due to the pro-oxidant, t-BOOH. Nevertheless, PE was a stronger ROS scavenger by demonstrating ROS reducing activity in a dose-dependent manner to the basal level. This fraction was also found to inhibit cell death caused by t-BOOH toxicity, attenuating lactate dehydrogenase enzyme leakage by more than 90% (p<0.05). In addition, gene expression of phase II antioxidant enzymes (hmox-1 and nqo-1) and their transcription factor (nrf-2) were shown to be upregulated upon PE treatment during a time-course study. A GC-MS fingerprint of the active fraction was subsequently obtained with standardization using the marker compound; α-tocopherol, a well known antioxidant. However, this pure compound was not as effective as its corresponding PE concentrations in ROS reduction. Hence, PE of papaya leaf extract was a strong antioxidant and cytoprotectant with tremendous potential to be harnessed into the next therapeutic remedy against oxidative stress of the liver.