The objective of this study is to investigate the respective effects of Zn, Pb and Cd as well as the combined effect of Zn, Pb, Cd and Cu on the removal of nitrogen and oxygen demand in constructed wetlands. Four laboratory-scale gravel-filled subsurface-flow constructed wetland units planted with cattails (Typha latifolia) were operated outdoors and fed with primary-treated domestic wastewater at a constant flow rate of 25 ml/min. After 6 months, three of the wetland units were fed with the same type of wastewater spiked with Zn(II), Pb(II) and Cd(II), respectively, at 20, 5 and 1 mg/l for a further 9 months. The remaining unit was fed with the same type of wastewater spiked with a combination of Zn(II), Pb(II), Cd(II) and Cu(II) at concentrations of 10, 2.5, 0.5 and 5 mg/l, respectively, over the same period. The chemical oxygen demand (COD) and ammoniacal nitrogen (AN) concentrations were monitored at the inlet, outlet and three additional locations along the length of the wetland units to assess the performance of the wetland units at various metal loadings. At the end of the study, all cattail plants were harvested for the determination of total Kjeldahl nitrogen and metal concentrations. The results showed that the COD removal efficiency was practically independent of increasing metal loading or a combination of metal loadings during the duration of the study. In contrast, the AN removal efficiency deteriorated progressively with increasing metal loading. The relative effect of the heavy metals was found to increase in the order: Zn
The climate change phenomenon has been occurring in every part of the world, including Malaysia. In particular, changes such as rising temperature, sea level rise, and unstable rain pattern are proven to affect the socio-economic routine of the community. Hence, it is necessary to learn how to adapt to it, especially those who heavily rely on nature stability. The present study examined the adaptation towards climate change among islanders in Malaysia. In addition, the current research was performed quantitatively using a developed questionnaire as the main data collection tool. In this case, a total of 400 islanders were selected as the respondents through a multi-stage sampling technique. The results revealed that the respondents recorded a moderate to high mean score for adaptation aspects namely awareness, dependency and structure. Accordingly, a number of recommendations that were highlighted can be utilized as a basis to develop community adaptation policy that is in line with the islanders' need, ability, and interests.
The prevalence of multidrug-resistant Gram-negative bacteria in aquatic environments has been a long withstanding health concern, namely extended-spectrum beta-lactamase (ESBL) producing Escherichia coli. Given increasing reports on microplastic (MP) pollution in these environments, it has become crucial to better understand the role of MP particles as transport vectors for such multidrug-resistant bacteria. In this study, an incubation experiment was designed where particles of both synthetic and natural material (HDPE, tyre wear, and wood) were sequentially incubated at multiple sites along a salinity gradient from the Lower Weser estuary (Germany) to the offshore island Helgoland (German Bight, North Sea). Following each incubation period, particle biofilms and water samples were assessed for ESBL-producing E. coli, first by the enrichment and detection of E. coli using Fluorocult® LMX Broth followed by cultivation on CHROMAgar™ ESBL media to select for ESBL-producers. Results showed that general E. coli populations were present on the surfaces of wood particles across all sites but none were found to produce ESBLs. Additionally, neither HDPE nor tyre wear particles were found to harbour any E. coli. Conversely, ESBL-producing E. coli were present in surrounding waters from all sites, 64% of which conferred resistances against up to 3 other antibiotic groups, additional to the beta-lactam resistances intrinsic to ESBL-producers. This study provides a first look into the potential of MP to harbour and transport multidrug-resistant E. coli across different environments and the approach serves as an important precursor to further studies on other potentially harmful MP-colonizing species.
This study investigates the textural characteristics of sediments collected at eroded and deposited areas of highly severed eroded coastline of Batu Pahat, Malaysia. Samples were taken from systematically selected 23 locations along the 67km stretch of coastline and are extended to the fluvial sediments of the main river of Batu Pahat. Grain size distribution analysis was conducted to identify its textural characteristics and associated sedimentary transport behaviours. Sediments obtained along the coastline were fine-grained material with averaged mean size of 7.25 ϕ, poorly sorted, positively skewed and has wide distributions. Samples from eroded and deposition regions displayed no distinctive characteristics and exhibited similar profiles. The high energy condition transported the sediments as suspension, mostly as pelagic and the sediments were deposited as shallow marine and agitated deposits. The fluvial sediments of up to 3km into the river have particularly similar profile of textural characteristics with the neighbouring marine sediments from the river mouth. Profiles were similar with marine sediments about 3km opposite the main current and can go up to 10km along the current of Malacca Straits.
Although carbon dioxide (CO2) is well known as one of the major green-house gases, it is also an economical C1 resource. Thus, CO2has been regarded as an appealing starting material for the synthesis of polymers, like polycarbonates by the reaction with epoxides. Herein the reaction between natural epoxidized soybean oil (ESO), propylene oxide (PO) and CO2under high pressure (4.0MPa) with the presence of Co-Zn double metal cyanide (Co-Zn DMC) catalyst was studied. Temperature and reaction time were varied accordingly and the products obtained were characterized by FTIR, GPC and1H NMR. The results obtained indicate the formation of polycarbonates in the samples collected with yields vary from 60 to 85%. The number average molecular weight (Mn) of the resultant polymer prepared at reaction temperature of 80°C and reaction time of 6h can reach up to 6498g/mol.
Interest in biodiesel research has escalated over the years due to dwindling fossil fuel reserves. The implementation of a carbon-based solid acid catalyst in biodiesel production eradicates the separation problems associated with homogeneous catalysis. However, its application in the glycerol-free interesterification process for biodiesel production is still rarely being studied in the literature. In this study, novel environmentally benign catalysts were prepared from oil palm empty fruit bunch (OPEFB) derived activated carbon (AC) which is sustainable and low cost via direct sulfonation using concentrated sulfuric acid. The effects of synthesizing variables such as carbonization and sulfonation temperatures with different holding times towards the fatty acid methyl ester (FAME) yield in interesterification reaction with oleic acid and methyl acetate were investigated in detail. It was found that the optimum carbonization temperature and duration together with sulfonation temperature and duration were 600 °C, 3 h, 100 °C and 6 h, respectively. The catalyst possessed an amorphous structure with a high total acid density of 9.0 mmol NaOH g-1 due to the well-developed porous framework structure of the carbon support. Under these optimum conditions, the OPEFB derived solid acid catalyst recorded an excellent catalytic activity of 50.5% methyl oleate yield at 100 °C after 8 h with 50:1 methyl acetate to oleic acid molar ratio and 10 wt% catalyst dosage. The heterogeneous acid catalyst derived from OPEFB had shown promising properties that made them highly suitable for cost-effective and environmental-friendly glycerol-free biodiesel production.
The globalization of the palm oil trade poses a menace to the ecosystem integrity of Southeast Asia. In this short communication, we briefly discuss why palm oil certifications may have failed as an effective means to halt forest degradation and biodiversity loss. From a comparison of multiple new datasets, we analysed recent tree loss in Indonesia, Malaysia, and Papua New Guinea, and discovered that, from 2001 to 2016, about 40% of the area located in certified concessions suffered from habitat degradation, deforestation, fires, or other tree damages. Certified concessions have been subject to more tree removals than non-certified ones. We also detect significant tree loss before and after the start of certification schemes. Beyond non-governmental organisations' concern that Roundtable on Sustainable Palm Oil (RSPO) and Palm Oil Innovation Group (POIG) certifications allow ongoing clearance of any forest not identified as of high conservation values (HCV) or high carbon stock (HCS), we suggest an alarming and previously overlooked situation, such as that current "sustainable palm oil" is often associated with recent habitat degradation and forest loss. In other words, certified palm oil production may not be so sustainable.
Preparation of natural hazards maps are vital and essential for urban development. The main scope of this study is to synthesize natural hazard maps in a single multi-hazard map and thus to identify suitable areas for the urban development. The study area is the drainage basin of Xerias stream (Northeastern Peloponnesus, Greece) that has frequently suffered damages from landslides, floods and earthquakes. Landslide, flood and seismic hazard assessment maps were separately generated and further combined by applying the Analytical Hierarchy Process (AHP) and utilizing a Geographical Information System (GIS) to produce a multi-hazard map. This map represents the potential suitability map for urban development in the study area and was evaluated by means of uncertainty analysis. The outcome revealed that the most suitable areas are distributed in the southern part of the study area, where the landslide, flood and seismic hazards are at low and very low level. The uncertainty analysis shows small differences on the spatial distribution of the suitability zones. The produced suitability map for urban development proves a satisfactory agreement between the suitability zones and the landslide and flood phenomena that have affected the study area. Finally, 40% of the existing urban pattern boundaries and 60% of the current road network are located within the limits of low and very low suitability zones.
In common with most of Borneo, the Bakun region of Sarawak is currently subject to heavy deforestation mainly due to logging and, to a lesser extent, traditional slash-and-burn farming practices. This has the potential to affect stream ecosystems, which are integrators of environmental change in the surrounding terrestrial landscape. This study evaluated the effects of both types of deforestation by using functional and structural indicators (leaf litter decomposition rates and associated detritivores or 'shredders', respectively) to compare a fundamental ecosystem process, leaf litter decomposition, within logged, farmed and pristine streams. Slash-and-burn agricultural practices increased the overall rate of decomposition despite a decrease in shredder species richness (but not shredder abundance) due to increased microbial decomposition. In contrast, decomposition by microbes and invertebrates was slowed down in the logged streams, where shredders were less abundant and less species rich. This study suggests that shredder communities are less affected by traditional agricultural farming practices, while modern mechanized deforestation has an adverse effect on both shredder communities and leaf breakdown.
The continuous growth of population and the steady improvement of people's living standards have accelerated the generation of massive food waste. Untreated food waste has great potential to harm the environment and human health due to bad odor release, bacterial leaching, and virus transmission. However, the application of traditional disposal techniques like composting, landfilling, animal feeding, and anaerobic digestion are difficult to ease the environmental burdens because of problems such as large land occupation, virus transmission, hazardous gas emissions, and poor efficiency. Pyrolysis is a practical and promising route to reduce the environmental burden by converting food waste into bioenergy. This paper aims to analyze the characteristics of food waste, introduce the production of biofuels from conventional and advanced pyrolysis of food waste, and provide a basis for scientific disposal and sustainable management of food waste. The review shows that co-pyrolysis and catalytic pyrolysis significantly impact the pyrolysis process and product characteristics. The addition of tire waste promotes the synthesis of hydrocarbons and inhibits the formation of oxygenated compounds efficiently. The application of calcium oxide (CaO) exhibits good performance in the increment of bio-oil yield and hydrocarbon content. Based on this literature review, pyrolysis can be considered as the optimal technique for dealing with food waste and producing valuable products.
The speciation patterns of Cu, Cd, Zn, Pb, Fe and Mn in sediment samples under anoxic and oxidized conditions were investigated using three-stage, four-stage and five-stage sequential extraction schemes. All the extraction schemes identify the non-residual metal among three basic operationally-defined host fractions, namely, exchangeable, reducible and organic/sulfide bound. The anoxic sediment samples were found to have been oxidized during the extraction stage for the reducible fraction under the three-stage and four-stage schemes and the moderately reducible fraction under the five-stage scheme despite the maintenance of an oxygen-free environment. This artifact has resulted in an over-representation of the reducible fraction and an under-representation of the organic/sulfide fraction in the heavy metal speciation patterns of anoxic sediment samples. For Cd, Zn and Pb which had > 70% associated with the acid volatile sulfide in the organic/sulfide fraction, this artifact has resulted in the observation of a decrease in the reducible fraction and, in some cases, an increase in the organic/sulfide fraction upon oxidation of the anoxic sediment samples.
This study reports the distribution of microplastics (MPs) in surface water and estuarine sediments in South and North Setiu Wetland in the South China Sea. Sampling was conducted bimonthly for one year from November 2016 to November 2017, including the northeast and southwest monsoons. Water surface and sediment samples were collected from six different sampling stations (STs). Samples were sorted based on physical analysis (optical observation) and selected particles were further analyzed by chemical characterizations. The findings of this study indicate that a total of 0.36 items/L and 5.97 items/g particles of MPs were found from characterizations surface water and dry sediment, respectively. Among the selected stations included in this research, ST3 (1.375 ± 0.347 items/L) and ST2 (14.250 ± 4.343 items/g) were individually identified as high potential MP sinking areas, exacerbated during the northeast and southwest monsoons. Transparent, film, and filament MP types were consistently found across all stations. Microplastic filaments revealed a functional group of polypropylenes based on the main peak spectrum at 2893-2955 cm-1 (CH alkyl stretching), 1458 cm-1 (CH2 bending), and 1381 cm-1 (CH3 bending). Microplastic materials were thermally decomposed by pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) and identified as cyclohexane and cyclohexene derivatives, as well as precursors of polymer blends. The distribution of MPs in both matrices varied according to different seasons. These findings provide useful baseline information on the distribution of MPs from the estuarine area in Malaysia and South China Sea waters.
Understanding of the distribution patterns of sediment erosion, concentration and transport in river basins is critically important as sediment plays a major role in river basin hydrophysical and ecological processes. In this study, we proposed an integrated framework for the assessment of sediment dynamics, including soil erosion (SE), suspended sediment load (SSL) and suspended sediment concentration (SSC), and applied this framework to the Mekong River Basin. The Revised Universal Soil Loss Equation (RUSLE) model was adopted with a geographic information system to assess SE and was coupled with a sediment accumulation and a routing scheme to simulate SSL. This framework also analyzed Landsat imagery captured between 1987 and 2000 together with ground observations to interpolate spatio-temporal patterns of SSC. The simulated SSL results from 1987 to 2000 showed the relative root mean square error of 41% and coefficient of determination (R(2)) of 0.89. The polynomial relationship of the near infrared exoatmospheric reflectance and the band 4 wavelength (760-900nm) to the observed SSC at 9 sites demonstrated the good agreement (overall relative RMSE=5.2%, R(2)=0.87). The result found that the severe SE occurs in the upper (China and Lao PDR) and lower (western part of Vietnam) regions. The SSC in the rainy season (June-November) showed increasing and decreasing trends longitudinally in the upper (China and Lao PDR) and lower regions (Cambodia), respectively, while the longitudinal profile of SSL showed a fluctuating trend along the river in the early rainy season. Overall, the results described the unique spatio-temporal patterns of SE, SSL and SSC in the Mekong River Basin. Thus, the proposed integrated framework is useful for elucidating complex process of sediment generation and transport in the land and river systems of large river basins.
The spatial variation of soil erosion is essential for farming system management and resilience development, specifically in the high climate hazard vulnerable tropical countries like Sri Lanka. This study aimed to investigate climate and human-induced soil erosion through spatial modeling. Remote sensing was used for spatial modeling to detect soil erosion, crop diversity, and rainfall variation. The study employed a time-series analysis of several variables such as rainfall, land-use land-cover (LULC) and crop diversity to detect the spatial variability of soil erosion in farming systems. Rain-use efficiency (RUE) and residual trend analysis (RESTREND) combined with a regression approach were applied to partition the soil erosion due to human and climate-induced land degradation. Results showed that soil erosion has increased from 9.08 Mg/ha/yr to 11.08 Mg/ha/yr from 2000 to 2019 in the Central Highlands of Sri Lanka. The average annual rainfall has increased in the western part of the Central Highlands, and soil erosion hazards such as landslides incidence also increased during this period. However, crop diversity has been decreasing in farming systems, namely wet zone low country (WL1a) and wet zone mid-country (WM1a), in the western part of the Central Highlands. The RUE and RESTREND analyses reveal climate-induced soil erosion is responsible for land degradation in these farming systems and is a threat to sustainable food production in the farming systems of the Central Highlands.
The increasing frequency of mining activities in the world has led to many environmental pollution problems, such as mine wastewater discharge, mine solid waste dumps, and mine dust dispersion. These problems have negative implications for the environment and the public health of people living nearby the mining areas. Despite this, there are few methods to determine the state of mine pollution on a regional scale. Therefore, we applied remote sensing technologies to assess the mine pollution situation, especially the mine solid waste pollution, of a mining area, taking Qibaoshan Town, Liuyang City, Hunan Province, China, as an example. In our research, we have calculated the vegetation cover change of the Qibaoshan Town over the years (2000-2020), charted the vegetation coverage grade maps, and analysed the tendency of vegetation cover changes, to infer the mine pollution situation, the progress of pollution treatment and the efforts made by the local government and the mines on mine pollution disposal and the land reclamation. Additionally, mining damage can bring about geological hazards such as surface subsidence leading to vegetation destruction, while mining solid waste pollution and discharge can occupy a large amount of land and thus lead to vegetation reduction. As a result, this method of calculating FVC changes in a mining area is particularly suitable for assessing the extent of mining damage, the status of solid waste pollution and discharge, and the progress of land reclamation. In the abstract, we claim that this short communication article serves as a guide to start a conversation, and encourages experts and scholars to engage in this area of research.
Beta-agonists and sulfonamides are widely used for treating both humans and livestock for bronchial and cardiac problems, infectious disease and even as growth promoters. There are concerns about their potential environmental impacts, such as producing drug resistance in bacteria. This study focused on their spatial distribution in surface water and the identification of pollution sources in the Langat River basin, which is one of the most urbanized watersheds in Malaysia. Fourteen beta-agonists and 12 sulfonamides were quantitatively analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). A geographic information system (GIS) was used to visualize catchment areas of the sampling points, and source profiling was conducted to identify the pollution sources based on a correlation between a daily pollutant load of the detected contaminant and an estimated density of human or livestock population in the catchment areas. As a result, 6 compounds (salbutamol, sulfadiazine, sulfapyridine, sulfamethazine, sulfadimethoxine and sulfamethoxazole) were widely detected in mid catchment areas towards estuary. The source profiling indicated that the pollution sources of salbutamol and sulfamethoxazole were from sewage, while sulfadiazine was from effluents of cattle, goat and sheep farms. Thus, this combination method of quantitative and spatial analysis clarified the spatial distribution of these drugs and assisted for identifying the pollution sources.
This study entailed a review of 63 scientific articles on geospatial and spatial-statistical analysis of the geographical dimension of the 2019 coronavirus disease (COVID-19) pandemic. The diversity of themes identified in this paper can be grouped into the following categories of disease mapping: spatiotemporal analysis, health and social geography, environmental variables, data mining, and web-based mapping. Understanding the spatiotemporal dynamics of COVID-19 is essential for its mitigation, as it helps to clarify the extent and impact of the pandemic and can aid decision making, planning and community action. Health geography highlights the interaction of public health officials, affected actors and first responders to improve estimations of disease propagation and likelihoods of new outbreaks. Attempts at interdisciplinary correlation examine health policy interventions for the siting of health/sanitary services and controls, mapping/tracking of human movement, formulation of appropriate scientific and political responses and projection of spatial diffusion and temporal trends. This review concludes that, to fight COVID-19, it is important to face the challenges from an interdisciplinary perspective, with proactive planning, international solidarity and a global perspective. This review provides useful information and insight that can support future bibliographic queries, and also serves as a resource for understanding the evolution of tools used in the management of this major global pandemic of the 21 Century. It is hoped that its findings will inspire new reflections on the COVID-19 pandemic by readers.
Fluxes and composition dynamics of atmospheric nitrogen deposition play key roles in better balancing economic development and ecological environment. However, there are some knowledge gaps and difficulties in urban ecosystems, especially for small and medium-sized cities. In this study, both flux and composition (ratio of NH4+-N to NO3--N, RN) of wet-deposited dissolved inorganic nitrogen (DIN, sum of NO3--N and NH4+-N) were estimated and sources were identified at a long-term urban observation station in Tongling, a typical medium-sized city in eastern China during 2010-2016, respectively. Results showed that wet-deposited DIN fluxes were 33.20 and 28.15 kgN ha-1 yr-1 in Tongling city during 2010-2011 and 2015-2016, respectively. Compared to these two periods, both DIN and NO3--N fluxes decreased by 15.2% and 31.8% for a series of NOx abatement measures applied effectively, respectively. At the same time, the NH4+-N flux remained stable and ranged from 19.53 to 20.62 kgN ha-1 yr-1, and the RN increased from 1.7 to 2.2. Seasonally, winds from the southwest and west-southwest with higher frequencies and speeds in spring and summer brought more NH4+-N and DIN wet deposition from an ammonia plant, which could threaten the safety of regional hydrosphere ecosystems. On the whole, the wet-deposited NH4+-N was threatening regional ecosystems of both the hydrosphere and forest. The wet-deposited DIN including NH4+-N in Tongling city stemmed mainly from a combined source of coal combustion and dust from Cu extraction and smelting, ammonia production, and roads. Therefore, production lines should be updated for Cu extraction and smelting industries, thermal power generations and the ammonia plant, old vehicles should be eliminated, and the use of new energy vehicles should be promoted for regional sustainable development and human health in the medium-sized city.
The identification of nitrogen sources and cycling processes is critical to the management of nitrogen pollution. Here, we used both stable (δ15N-NO3-, δ18O-NO3-, δ15N-NH4+) and radiogenic (222Rn) isotopes together with nitrogen concentrations to evaluate the relative importance of point (i.e. sewage) and diffuse sources (i.e. agricultural-derived NO3- from groundwater, drains and creeks) in driving nitrogen dynamic in a shallow coastal embayment, Port Phillip Bay (PPB) in Victoria, Australia. This study is an exemplar of nitrogen-limited coastal systems around the world where nitrogen contamination is prevalent and where constraining it may be challenging. In addition to surrounding land use, we found that the distributions of NO3- and NH4+ in the bay were closely linked to the presence of drift algae. Highest NO3- and NH4+ concentrations were 315 μmol L-1 and 2140 μmol L-1, respectively. Based on the isotopic signatures of NO3- (δ15N: 0.17 to 21‰; δ18O: 3 to 26‰) and NH4+ (δ15N: 30 to 39‰) in PPB, the high nitrogen concentrations were attributed to three major sources which varied between winter and summer; (1) nitrified sewage effluent and drift algae derived NH4+ mainly during winter, (2) NO3- mixture from atmospheric deposition, drains and creeks predominantly observed during summer and (3) groundwater and sewage derived NO3- during both surveys. The isotopic composition of NO3- also suggested the removal of agriculture-derived NO3- through denitrification was prevalent during transport. This study highlights the role of terrestrial-coastal interactions on nitrogen dynamics and illustrates the importance of submarine groundwater discharge as a prominent pathway of diffuse NO3- inputs. Quantifying the relative contributions of multiple NO3- input pathways, however, require more extensive efforts and is an important avenue for future research.
This study aims to determine PM2.5concentrations and their composition during haze and non-haze episodes in Kuala Lumpur. In order to investigate the origin of the measured air masses, the Numerical Atmospheric-dispersion Modelling Environment (NAME) and Global Fire Assimilation System (GFAS) were applied. Source apportionment of PM2.5was determined using Positive Matrix Factorization (PMF). The carcinogenic and non-carcinogenic health risks were estimated using the United State Environmental Protection Agency (USEPA) method. PM2.5samples were collected from the centre of the city using a high-volume air sampler (HVS). The results showed that the mean PM2.5concentrations collected during pre-haze, haze and post-haze periods were 24.5±12.0μgm-3, 72.3±38.0μgm-3and 14.3±3.58μgm-3, respectively. The highest concentration of PM2.5during haze episode was five times higher than World Health Organisation (WHO) guidelines. Inorganic compositions of PM2.5, including trace elements and water soluble ions were determined using inductively coupled plasma-mass spectrometry (ICP-MS) and ion chromatography (IC), respectively. The major trace elements identified were K, Al, Ca, Mg and Fe which accounted for approximately 93%, 91% and 92% of the overall metals' portions recorded during pre-haze, haze and post-haze periods, respectively. For water-soluble ions, secondary inorganic aerosols (SO42-, NO3-and NH4+) contributed around 12%, 43% and 16% of the overall PM2.5mass during pre-haze, haze and post-haze periods, respectively. During haze periods, the predominant source identified using PMF was secondary inorganic aerosol (SIA) and biomass burning where the NAME simulations indicate the importance of fires in Sumatra, Indonesia. The main source during pre-haze and post-haze were mix SIA and road dust as well as mineral dust, respectively. The highest non-carcinogenic health risk during haze episode was estimated among the infant group (HI=1.06) while the highest carcinogenic health risk was estimated among the adult group (2.27×10-5).