The title phosphanegold(I) thiol-ate compound, [Au(C9H9N2O3S)(C21H21P)], is a second monoclinic polymorph (space group P21/c) that complements a previously reported Cc polymorph [Broker & Tiekink (2008 ▸). Acta Cryst. E64, m1582]. An SP donor set defines an approximately linear geometry about the gold atom in both forms. The key distinguishing feature between the present structure and the previously reported polymorph rests with the relative disposition of the thiol-ate ligand. In the title compound, the orientation is such to place the oxygen atom in close contact with the gold atom [Au⋯O = 2.915 (2) Å], in contrast to the aryl ring in the original polymorph. In the crystal, linear supra-molecular chains along the a-axis direction mediated by C-H⋯π and nitro-O⋯π inter-actions are found. These pack with no directional inter-actions between them. The analysis of the Hirshfeld surfaces for both forms of [Au(C9H9N3O3S)(C21H21P)] indicates quite distinctive inter-action profiles relating to the differences in inter-molecular contacts found in their respective crystals.
In the title cluster complex hexane solvate, [Ru6(C30H32P2)(CO)22]·C6H14, two Ru3(CO)11 fragments are linked by a Ph2P(CH2)6PPh2 bridge with the P atoms equatorially disposed with respect to the Ru3 triangle in each case; the hexane solvent mol-ecule is statistically disordered. The Ru⋯Ru distances span a relatively narrow range, i.e. 2.8378 (4) to 2.8644 (4) Å. The hexyl chain within the bridge has an all-trans conformation. In the mol-ecular packing, C-H⋯O inter-actions between cluster mol-ecules, and between cluster and hexane solvent mol-ecules lead to a three-dimensional architecture. In addition, there are a large number of C≡O⋯π(arene) inter-actions in the crystal. The importance of the carbonyl groups in establishing the packing is emphasized by the contribution of 53.4% to the Hirshfeld surface by O⋯H/H⋯O contacts.
The common feature of the title compounds, [Zn(C5H10NO2S2)2(C10H8N2)]·2H2O, (I), and [Zn(C6H12NOS2)2(C10H8N2)], (II), is the location of the Zn(II) atoms on a twofold rotation axis. Further, each Zn(II) atom is chelated by two symmetry-equivalent and symmetrically coordinating di-thio-carbamate ligands and a 2,2'-bi-pyridine ligand. The resulting N2S4 coordination geometry is based on a highly distorted octa-hedron in each case. In the mol-ecular packing of (I), supra-molecular ladders mediated by O-H⋯O hydrogen bonding are found whereby the uprights are defined by {⋯HO(water)⋯HO(hy-droxy)⋯} n chains parallel to the a axis and with the rungs defined by 'Zn[S2CN(CH2CH2)2]2'. The water mol-ecules connect the ladders into a supra-molecular layer parallel to the ab plane via water-O-H⋯S and pyridyl-C-H⋯O(water) inter-actions, with the connections between layers being of the type pyridyl-C-H⋯S. In (II), supra-molecular layers parallel to the ab plane are sustained by hy-droxy-O-H⋯S hydrogen bonds with connections between layers being of the type pyridyl-C-H⋯S.
The asymmetric unit of the title 2:1 co-crystal, 2C8H8O2·C14H14N4O2, comprises an acid mol-ecule in a general position and half a di-amide mol-ecule, the latter being located about a centre of inversion. In the acid, the carb-oxy-lic acid group is twisted out of the plane of the benzene ring to which it is attached [dihedral angle = 28.51 (8)°] and the carbonyl O atom and methyl group lie approximately to the same side of the mol-ecule [hy-droxy-O-C-C-C(H) torsion angle = -27.92 (17)°]. In the di-amide, the central C4N2O2 core is almost planar (r.m.s. deviation = 0.031 Å), and the pyridyl rings are perpendicular, lying to either side of the central plane [central residue/pyridyl dihedral angle = 88.60 (5)°]. In the mol-ecular packing, three-mol-ecule aggregates are formed via hy-droxy-O-H⋯N(pyrid-yl) hydrogen bonds. These are connected into a supra-molecular layer parallel to (12[Formula: see text]) via amide-N-H⋯O(carbon-yl) hydrogen bonds, as well as methyl-ene-C-H⋯O(amide) inter-actions. Significant π-π inter-actions occur between benzene/benzene, pyrid-yl/benzene and pyrid-yl/pyridyl rings within and between layers to consolidate the three-dimensional packing.
The title compound, [Au(C8H7ClNOS)(C18H15P)], is a monoclinic (P21/n, Z' = 1; form β) polymorph of the previously reported triclinic form (P-1, Z' = 1; form α) [Tadbuppa & Tiekink (2010 ▸). Acta Cryst. E66, m664]. The mol-ecular structures of both forms feature an almost linear gold(I) coordination geometry [P-Au-S = 175.62 (5)° in the title polymorph], being coordinated by thiol-ate S and phosphane P atoms, a Z conformation about the C=N bond and an intra-molecular Au⋯O contact. The major conformational difference relates to the relative orientations of the residues about the Au-S bond: the P-Au-S-C torsion angles are -8.4 (7) and 106.2 (7)° in forms α and β, respectively. The mol-ecular packing of form β features centrosymmetric aggregates sustained by aryl-C-H⋯O inter-actions, which are connected into a three-dimensional network by aryl-C-H⋯π contacts. The Hirshfeld analysis of forms α and β shows many similarities with the notable exception of the influence of C-H⋯O inter-actions in form β.
In the solid state, the title compound, C12H16BrNO5 [systematic name: 4-bromo-2-((1E)-{[1,3-dihy-droxy-2-(hy-droxy-meth-yl)propan-2-yl]iminium-yl}meth-yl)-6-meth-oxy-benzen-1-olate], C12H16BrNO5, is found in the keto-amine tautomeric form, with an intra-molecular iminium-N-H⋯O(phenolate) hydrogen bond and an E conformation about the C=N bond. Both gauche (two) and anti relationships are found for the methyl-hydroxy groups. In the crystal, a supra-molecular layer in the bc plane is formed via hy-droxy-O-H⋯O(hy-droxy) and charge-assisted hy-droxy-O-H⋯O(phenolate) hydrogen-bonding inter-actions; various C-H⋯O inter-actions provide additional cohesion to the layers, which stack along the a axis with no directional inter-actions between them. A Hirshfeld surface analysis confirms the lack of specific inter-actions in the inter-layer region.
The crystal and mol-ecular structures of two di-phenyl-tin bis-(di-thio-carbamate)s, [Sn(C6H5)2(C5H10NOS2)2], (I), and [Sn(C6H5)2(C7H14NO2S2)2], (II), are described. In (I), in which the metal atom lies on a twofold rotation axis, the di-thio-carbamate ligand coordinates with approximately equal Sn-S bond lengths and the ipso-C atoms of the Sn-bound phenyl groups occupy cis-positions in the resulting octa-hedral C2S4 donor set. A quite distinct coordination geometry is noted in (II), arising as a result of quite disparate Sn-S bond lengths. Here, the four S-donors define a trapezoidal plane with the ipso-C atoms lying over the weaker of the Sn-S bonds so that the C2S4 donor set defines a skewed trapezoidal bipyramid. The packing of (I) features supra-molecular layers in the ab plane sustained by methyl-ene-C-H⋯π(Sn-ar-yl) inter-actions; these stack along the c-axis direction with no specific inter-actions between them. In (II), supra-molecular chains along the b-axis direction are formed by methyl-ene-C-O(ether) inter-actions; these pack with no directional inter-actions between them. A Hirshfeld surface analysis was conducted on both (I) and (II) and revealed the dominance of H⋯H inter-actions contributing to the respective surfaces, i.e. >60% in each case, and other features consistent with the description of the mol-ecular packing above.
In the organic mol-ecule of the title hydrate, C11H15N3OS·H2O, {systematic name: 3-ethyl-1-{(E)-[1-(2-hy-droxy-phen-yl)ethyl-idene]amino}-thio-urea monohydrate}, a dihedral angle of 5.39 (2)° is formed between the hy-droxy-benzene ring and the non-H atoms comprising the side chain (r.m.s. deviation = 0.0625 Å), with the major deviation from planarity noted for the terminal ethyl group [the C-N-C-C torsion angle = -172.17 (13)°]. The N-H H atoms are syn and an intra-molecular hy-droxy-imine O-H⋯N hydrogen bond is noted. In the crystal, the N-bonded H atoms form hydrogen bonds to symmetry-related water mol-ecules, and the latter form donor inter-actions with the hy-droxy O atom and with a hy-droxy-benzene ring, forming a O-H⋯π inter-action. The hydrogen bonding leads to supra-molecular tubes aligned along the b axis. The tubes are connected into layers via C-H⋯O inter-actions, and these stack along the c axis with no directional inter-actions between them.
The title compound, C16H15N5O2, adopts the shape of the letter L with the dihedral angle between the outer pyridyl rings being 78.37 (5)°; the dihedral angles between the central pyrazolyl ring (r.m.s. deviation = 0.0023 Å) and the methyl-ene-bound pyridyl and methyoxypyridyl rings are 77.68 (5) and 7.84 (10)°, respectively. Intra-molecular amide-N-H⋯N(pyrazol-yl) and pyridyl-C-H⋯O(amide) inter-actions are evident and these preclude the participation of the amide-N-H and O atoms in inter-molecular inter-actions. The most notable feature of the mol-ecular packing is the formation of linear supra-molecular chains aligned along the b-axis direction mediated by weak carbonyl-C=O⋯π(triazol-yl) inter-actions. An analysis of the calculated Hirshfeld surfaces point to the importance of H⋯H (46.4%), C⋯H (22.4%), O⋯H (11.9%) and N⋯H (11.1%) contacts in the crystal.
A new era of metal-based drugs started in the 1960s, heralded by the discovery of potent platinum-based complexes, commencing with cisplatin [(H₃N)₂PtCl₂], which are effective anti-cancer chemotherapeutic drugs. While clinical applications of gold-based drugs largely relate to the treatment of rheumatoid arthritis, attention has turned to the investigation of the efficacy of gold(I) and gold(III) compounds for anti-cancer applications. This review article provides an account of the latest research conducted during the last decade or so on the development of gold compounds and their potential activities against several cancers as well as a summary of possible mechanisms of action/biological targets. The promising activities and increasing knowledge of gold-based drug metabolism ensures that continued efforts will be made to develop gold-based anti-cancer agents.
A new, effective one-pot synthesis of the 6, N2-diaryl-1,3,5-triazine-2,4-diamines under microwave irradiation was developed. The method involved an initial three-component condensation of cyanoguanidine, aromatic aldehydes, and arylamines in the presence of hydrochloric acid. Without isolation, the resulting 1,6-diaryl-1,6-dihydro-1,3,5-triazine-2,4-diamines were treated with a base to initiate Dimroth rearrangement and spontaneous dehydrogenative aromatization, affording the desired compounds. The developed method was found to be sufficiently general in scope, tolerating various aromatic aldehydes and amines; by using their combinations in the first step, a representative library of 110 compounds was successfully prepared and screened for anticancer properties.
The asymmetric unit of the centrosymmetric title salt, C17H17F6N2O+·C2Cl3O2 -, comprises a single ion-pair. The hy-droxy-O and ammonium-N atoms lie to the same side of the cation, a disposition maintained by a charge-assisted ammonium-N-H⋯O(hy-droxy) hydrogen bond [the Oh-Cm-Cm-Na (h = hy-droxy, m = methine, a = ammonium) torsion angle is 58.90 (19)°]. The piperidin-1-ium group is approximately perpendicular to the quinolinyl residue [Cq-Cm-Cm-Na (q = quinolin-yl) is -178.90 (15)°] so that the cation, to a first approximation, has the shape of the letter L. The most prominent feature of the supra-molecular association in the crystal is the formation of chains along the a-axis direction, being stabilized by charge-assisted hydrogen-bonds. Thus, ammonium-N+-H⋯O-(carboxyl-ate) hydrogen bonds are formed whereby two ammonium cations bridge a pair of carboxyl-ate-O atoms, leading to eight-membered {⋯O⋯HNH}2 synthons. The resulting four-ion aggregates are linked into the supra-molecular chain via charge-assisted hydroxyl-O-H⋯O-(carboxyl-ate) hydrogen bonds. The connections between the chains, leading to a three-dimensional architecture, are of the type C-X⋯π, for X = Cl and F. The analysis of the calculated Hirshfeld surface points to the importance of X⋯H contacts to the surface (X = F, 25.4% and X = Cl, 19.7%) along with a significant contribution from O⋯H hydrogen-bonds (10.2%). Conversely, H⋯H contacts, at 12.4%, make a relatively small contribution to the surface.
The analysis of atom-to-atom and/or residue-to-residue contacts remains a favoured mode of analysing the mol-ecular packing in crystals. In this contribution, additional tools are highlighted as methods for analysis in order to complement the 'crystallographer's tool', PLATON [Spek (2009). Acta Cryst. D65, 148-155]. Thus, a brief outline of the procedures and what can be learned by using Crystal Explorer [Spackman & Jayatilaka (2009). CrystEngComm 11, 19-23] is presented. Attention is then directed towards evaluating the nature, i.e. attractive/weakly attractive/repulsive, of specific contacts employing NCIPLOT [Johnson et al. (2010). J. Am. Chem. Soc. 132, 6498-6506]. This is complemented by a discussion of the calculation of energy frameworks utilizing the latest version of Crystal Explorer. All the mentioned programs are free of charge and straightforward to use. More importantly, they complement each other to give a more complete picture of how mol-ecules assemble in mol-ecular crystals.
The crystal and mol-ecular structures of C14H12Cl2, (I), and C14H12Br2, (II), are described. The asymmetric unit of (I) comprises two independent mol-ecules, A and B, each disposed about a centre of inversion. Each mol-ecule approximates mirror symmetry [the Cb-Cb-Ce-Ce torsion angles = -83.46 (19) and 95.17 (17)° for A, and -83.7 (2) and 94.75 (19)° for B; b = benzene and e = ethyl-ene]. By contrast, the mol-ecule in (II) is twisted, as seen in the dihedral angle of 59.29 (11)° between the benzene rings cf. 0° in (I). The mol-ecular packing of (I) features benzene-C-H⋯π(benzene) and Cl⋯Cl contacts that lead to an open three-dimensional (3D) architecture that enables twofold 3D-3D inter-penetration. The presence of benzene-C-H⋯π(benzene) and Br⋯Br contacts in the crystal of (II) consolidate the 3D architecture. The analysis of the calculated Hirshfeld surfaces confirm the influence of the benzene-C-H⋯π(benzene) and X⋯X contacts on the mol-ecular packing and show that, to a first approximation, H⋯H, C⋯H/H⋯C and C⋯X/X⋯C contacts dominate the packing, each contributing about 30% to the overall surface in each of (I) and (II). The analysis also clearly differentiates between the A and B mol-ecules of (I).
The X-ray crystal structure of the title phthalazin-1-one derivative, C17H16N2O3S {systematic name: 2-[(2,4,6-tri-methyl-benzene)-sulfon-yl]-1,2-di-hydro-phthalazin-1-one}, features a tetra-hedral sulfoxide-S atom, connected to phthalazin-1-one and mesityl residues. The dihedral angle [83.26 (4)°] between the organic substituents is consistent with the mol-ecule having the shape of the letter V. In the crystal, phthalazinone-C6-C-H⋯O(sulfoxide) and π(phthalazinone-N2C4)-π(phthalazinone-C6) stacking [inter-centroid distance = 3.5474 (9) Å] contacts lead to a linear supra-molecular tape along the a-axis direction; tapes assemble without directional inter-actions between them. The analysis of the calculated Hirshfeld surfaces confirm the importance of the C-H⋯O and π-stacking inter-actions but, also H⋯H and C-H⋯C contacts. The calculation of the inter-action energies indicate the importance of dispersion terms with the greatest energies calculated for the C-H⋯O and π-stacking inter-actions.
The complete mol-ecule of the title hydrazine carbodi-thio-ate derivative, C32H30N4O2S4, is generated by a crystallographic twofold axis that bis-ects the di-sulfide bond. The mol-ecule is twisted about this bond with the C-S-S-C torsion angle of 90.70 (8)° indicating an orthogonal relationship between the symmetry-related halves of the mol-ecule. The conformation about the imine bond [1.282 (2) Å] is E and there is limited delocalization of π-electron density over the CN2C residue as there is a twist about the N-N bond [C-N-N-C torsion angle = -166.57 (15)°]. An intra-molecular hydroxyl-O-H⋯N(imine) hydrogen bond closes an S(6) loop. In the crystal, methyl-ene-C-H⋯π(tol-yl) contacts assemble mol-ecules into a supra-molecular layer propagating in the ab plane: the layers stack without directional inter-actions between them. The analysis of the calculated Hirshfeld surfaces confirm the importance of H⋯H contacts, which contribute 46.7% of all contacts followed by H⋯C/C⋯H contacts [25.5%] reflecting, in part, the C-H⋯π(tol-yl) contacts. The calculation of the inter-action energies confirm the importance of the dispersion term and the influence of the stabilizing H⋯H contacts in the inter-layer region.
In the title compound, [Zn(C4H8NOS2)2(C12H10N4)], the ZnII atom exists within a NS4 donor set defined by two chelating di-thio-carbamate ligands and a pyridyl-N atom derived from a terminally bound 4-pyridine-aldazine ligand. The distorted coordination geometry tends towards square-pyramidal with the pyridyl-N atom occupying the apical position. In the crystal, hydroxyl-O-H⋯O(hydrox-yl) and hydroxyl-O-H⋯N(pyrid-yl) hydrogen-bonding give rise to a supra-molecular double-chain along [1-10]; methyl-C-H⋯π(chelate ring) inter-actions help to consolidate the chain. The chains are connected into a three-dimensional architecture via pyridyl-C-H⋯O(hydrox-yl) inter-actions. In addition to the contacts mentioned above, the Hirshfeld surface analysis points to the significance of relatively weak π-π inter-actions between pyridyl rings [inter-centroid distance = 3.901 (3) Å].
The title compound, C10H13NOS, is a second monoclinic polymorph (space group P21/c, Z' = 2) of the previously reported C2/c (Z = 1) polymorph [Tadbuppa & Tiekink (2005 ▸). Z. Kristallogr. New Cryst. Struct. 220, 395-396]. Two independent mol-ecules comprise the asymmetric unit of the new polymorph and each of these exists as a thioamide-thione tautomer. In each molecule, the central CNOS chromophore is strictly planar [r.m.s. deviations = 0.0003 and 0.0015 Å] and forms dihedral angles of 6.17 (5) and 20.78 (5)° with the N-bound 3-tolyl rings, thereby representing the major difference between the mol-ecules. The thione-S and thio-amide-N-H atoms are syn in each mol-ecule and this facilitates the formation of an eight-membered thio-amide {⋯SCNH}2 synthon between them; the dimeric aggregates are consolidated by pairwise 3-tolyl-C-H⋯S inter-actions. In the extended structure, supra-molecular layers parallel to (102) are formed via a combination of 3-tolyl-C-H⋯π(3-tol-yl) and weak π-π inter-actions [inter-centroid distance between 3-tolyl rings = 3.8535 (12) Å]. An analysis of the Hirshfeld surfaces calculated for both polymorphs reveals the near equivalence of one of the independent mol-ecules of the P21/c form to that in the C2/c form.
The asymmetric unit of the title salt, C17H17F6N2O(+)·C10H8F3O3 (-), comprises two piperidin-1-ium cations and two carboxyl-ate anions. The cations, each having an l-shaped conformation owing to the near orthogonal relationship between the quinolinyl and piperidin-1-ium residues, are pseudo-enanti-omeric. The anions have the same absolute configuration but differ in the relative orientations of the carboxyl-ate, meth-oxy and benzene groups. Arguably, the most prominent difference between the anions occurs about the Cq-Om bond as seen in the Cc-Cq-Om-Cm torsion angles of -176.1 (3) and -67.1 (4)°, respectively (q = quaternary, m = meth-oxy and c = carboxyl-ate). The presence of Oh-H⋯Oc and Np-H⋯Oc hydrogen bonds leads to the formation of a supra-molecular chain along the a axis (h = hy-droxy and p = piperidin-1-ium); weak intra-molecular Np-H⋯Oh hydrogen bonds are also noted. Chains are connected into a three-dimensional architecture by C-H⋯F inter-actions. Based on a literature survey, related mol-ecules/cations adopt a uniform conformation in the solid state based on the letter L.
The asymmetric unit of the title compound, [Cd2(C12H10N2)3(C6H12NOS2)4]·4C2H3N, comprises a Cd(II) atom, two di-thio-carbamate (dtc) anions, one and a half trans-1,2-dipyridin-4-yl-ethyl-ene (bpe) mol-ecules and two aceto-nitrile solvent mol-ecules. The full binuclear complex is generated by the application of a centre of inversion. The dtc ligands are chelating, one bpe mol-ecule coordinates in a monodentate mode while the other is bidentate bridging. The resulting cis-N2S4 coordination geometry is based on an octa-hedron. Supra-molecular layers, sustained by hy-droxy-O-H⋯O(hy-droxy) and hy-droxy-O-H⋯N(bpe) hydrogen bonding, inter-penetrate to form a three-dimensional architecture; voids in this arrangement are occupied by the aceto-nitrile solvent mol-ecules. Additional inter-molecular inter-actions falling within the specified framework have been analysed by Hirshfeld surface analysis, including π-π inter-actions.