Transition metals play an important role in the growth of carbon nanotubes (CNTs). Series of unsupported hybrid catalysts consisting of Ni:Cu, Ni:Cr, and Ni:Mn doped with Nd catalyst, respectively were synthesized by impregnation method. The catalytic performance of the catalyst for the production of CNTs was measured in the pyrolysis process of hydrocarbon source by catalytic chemical vapour deposition method. Acetylene gas was used as the source of carbon in the pyrolysis process. The decomposition of acetylene was carried out at 700ºC. The bulk properties of the catalysts were investigated by X-ray diffraction. Field emission scanning electron microscopy and thermal analysis were used to observe the morphology and thermal stability of the as-synthesized CNTs, respectively. Hybrid catalyst of Ni:Mn/Nd and Ni:Cr/Nd in 3:1 atomic ratio gave high percentage of carbon yield which was assigned for the high production of CNTs with the mass of yield 18 times greater than the initial mass of the catalyst used.
This paper reports the mechanical properties of cement composite boards made using wood-wool from a lesser known Malaysian timber species. A total of 108 specimens were fabricated using Portland cement (Type I) and wood-wool from Kelampayan (Neolamarckia cadamba). The cement to wood ratio of the specimens was 2 to 1 by weight. The aim of the study was to determine the density; flexural, compressive and tensile strength of wood-wool cement composite boards (WWCCB) by studying boards with wood-wool sized 1.5 mm, 2.5 mm and 3.5 mm and board thickness 25 mm, 50 mm and 75mm. The physical and mechanical properties of the boards were evaluated according to ASTM D 1037-96a (Standard testing method for evaluating properties of wood-based fibre and particle panel materials) and MS934:1986. Results showed that mechanical properties of WWCCB were greatly influenced by the density; as the density decreased, the mechanical strengths also decreased. However, the strength properties of the composite boards did not display a similar trend when subjected to different types of loading conditions. The compressive strength increased with thicker boards (50 mm and 75 mm) but the modulus of elasticity and modulus of rupture declined as the thickness of the board was increased.
In this study, real-time imaging was monitored for flowing solid particles when various baffles were created to block certain areas of the pipe. The generated flow regimes were full-flow, three-quarter-flow, half-flow and quarter-flow. A vertical pneumatic conveyor was designed to hold a 85 mm inner diameter pipeline. The four projection optical tomography systems used, applied the parallel beam projection approach and use infrared light sources so that the sensor was free of noise from the surrounding visible light source. The two orthogonal and two rectilinear projections were axial, but ideally they should have been in the same layer. The sensor readings could be related to the varying light intensity effects of the dropping particles and were used to provide cross-sectional distribution information for the conveyor. By using computer programming, the information was reconstructed to produce coloured images and concentration was obtained by reference to a colour code. The results obtained from this study showed how imaged flow followed the artificial flow regime. This study could benefit industrial production lines in maintaining the desired flow rates.
The effects of topical application of Orthosiphon stamineus leaf extract on the rate of wound healing and histology of the healed wound were assessed. Four groups of adult male Sprague Dawley rats were experimentally wounded in the posterior neck area. A thin layer of blank placebo was applied topically to wounds of Group 1 rats. Wounds of experimental animals (Group 2 and 3) were dressed with placebo containing 5% and 10% O. stamineus extract, respectively. A thin layer of Intrasite gel® was applied topically to wounds of Group 4 animals as reference. Macroscopically, wounds dressed with placebo containing 5% (healed on day 14.50 ± 0.43) and 10% (healed on day 13.83 ± 0.21) O. stamineus extract each or Intrasite gel® (healed on day 13.13 ± 0.42) significantly accelerated the rate of wound healing compared to wounds dressed with blank placebo. Histological analysis of healed wounds confirmed the results. Wounds dressed with placebo containing 5%, 10% O.stamineus or Intrasite gel® showed markedly less scar width at wound enclosure and granulating tissue contained markedly more collagen, proliferating fibroblast with angiogenesis, and no inflammatory cells compared to wounds dressed with blank placebo. In conclusion, placebo containing 5% or 10% O. stamineus on extract-dressed wounds significantly accelerated the rate of wound healing in rats.
Ocimum basilicum seed extracts were found to possess significant anti-ulcer activity against ethanol-induced ulceration in experimental animal models. Three groups of adult male rats were used, with each group consisting of six rats. Oral administration of absolute ethanol to rats pre-treated with 10% Tween 20® (Group 1) produced extensive haemorrhagic lesions of the gastric mucosa. Rats orally pre-treated with O. basilicum extract suspended in 10% Tween 20® (Group 2) or cimetidine in 10% Tween 20® (Group 3), 30 min before oral administration of absolute alcohol had significantly reduced (p
We had reviewed the current practice in stocks market analysis where stock is represented by its closing price, and then found that this approach may be misleading. In actuality, in the daily activity of stocks market, stock is represented by four prices, namely opening, highest, lowest, and closing prices. Thus, stock is a multivariate time series of those four prices and not a univariate time series of closing price only. In this paper all four prices will be considered. Then, the notion of multivariate time series similarity among stocks will be developed as a generalisation of univariate time series similarity. The results are used to construct stocks network in multivariate setting. To filter the economic information contained in that network, the standard tools in econophysics is used. Furthermore, the topological properties of stocks are analysed by using the most common centrality measures. As an example, Bursa Malaysia data are investigated and we show that the proposed approach can better figure out the real situation compared to the current one.
Human activity has ‘very likely’ been the primary cause of global warming since the start of the Industrial Revolution (18th–19th century). As a new player in industrial transformation, Malaysia can choose to ignore the warnings of global warming. blame. This may not augur well. Release of greenhouse gases have been categorically linked to climate change and global warming. In her march towards industrialization, Malaysia too has contributed to the release of greenhouse gases. Apart from those arising from natural sources, the industrial sector in Malaysia also releases other types of gases such as the fluorocarbons. This is evident from the worsening air quality in some of our cities. (Copied from article).
Responses were recorded from normal healthy subjects and age-related macular degeneration (AMD) patients and evaluated, using a new variant of mfVEP. Subjects information was recorded using 64 EEG channels with a computer-based acquisition system. The stimulus layout was a 84 region corticallyscaled dartboard comprising 12 sectors and seven concentric rings subtending a diameter of 23º, presented dichoptically at 60 Hz. Data from the control and AMD patients were statistically compared when fitted concurrently into the multiple regression analysis. The Pattern-pulse mfVEP technique could distinguish between normal eyes and those with a definite diagnosis of dry and wet AMD when responses from the macula were considered.
This paper presents a suitable and unique system for observing dielectrophoretic particle separation in a microfluidic device. Details presented on the experimental setup used will enable real time examination, monitoring and analysis of carboxylate-modified latex sphere particles in a colloidal mixture. Observations of the particles were made possible through an optical setup that illuminates the particles that went through the microelectrode array in the microchannel that was controlled by two analog signal generators. Through the setup, it was easily observed that the latex sphere particles move at a flow rate of 0.2 μl/s without colliding or overlapping on each other and successfully separated in two bands left and right. The new separation of one finest particles size for finest purification with respect to frequency was also observed, obtained and analysed.
Giving zakat is the third of the five pillars of Islam and it is obligatory. The issues arose when the gantang
for zakat payment in Malaysia is converted to kilogramme, a metric unit for weight as usually used for
foods and there was no available standard for gantang used for zakat payment in Malaysia. However,
this unit is inaccurate since gantang (sa’) is not a measure of weight (mizan) but it is a measure of
volume (mikyal). Thus, the objective of this research is to study the volume of the sa’ and to calibrate it
in the correct metric unit for standardisation purpose. A qualitative method was used by calibrating the
gantang replica at Volume Laboratory, National Metrology Institute of Malaysia and the interviews with
State Islamic Council, State Zakat Centre and State Mufti Department. From the calibration, the capacity
of the gantang (sa’) was obtained, and subsequently, the respective capacities for cupak and agricultural
nisab were calculated. The finding of the research found that the volume of gantang was important in the
determination of nisab, a minimum amount of crop for a certain cropping season. Hopefully this research
would be a guideline for all states in Malaysia to be more systematic and efficient for the zakat agriculture
determination.
Wood density and types of shrinkage were examined in two rubberwood latex timber clones of rubber (Hevea brasiliensis) namely RRIM 2020 and RRIM 2025, planted at densities of 500, 1000, 1500, and 2000 trees/ha, within a trial plot. The mean wood density showed a low descending trend towards high planting densities in both clones. Wood density was significantly and negatively correlated with planting density. The strength of correlation was moderate. The mean longitudinal shrinkage in both clones and tangential shrinkages in clone RRIM 2020 showed no significant difference among planting densities. The tangential (in RRIM 2025), radial and volumetric shrinkages in both clones decreased from low to high planting densities and the differences were more pronounced between densities of 500 trees/ha and 2000 trees/ha. The magnitudes of correlation between these shrinkages and planting density were low. The regression models indicated that wood density could be more ascribed by planting density followed by volumetric shrinkage. This study exhibited low variations in wood density and shrinkages among clones and the respective planting densities; however, RRIM 2025 was more stable than RRIM 2020.
Katabatic winds dramatically affect the polar climate. Their activity depends on density of air and temperature in the source region. This paper presents for first time an analysis of the precipitable water vapour (PWV) variability and its relation to a katabatic event at Scott Base station, Antarctica. A significant effect in their characteristics toward calculation of a reliable user accuracy in GPS applications is addressed. Our investigations using the data between 21st and 30th of November 2002 showed that the PWV profile exhibited an irregular pattern with a maximum value of 7.38 mm (~ 6 mm on average), and was more strongly influenced by relative humidity than by wind speed activity. The dominant wind flow during this period was from the North-Northeast (blowing from the Ross Sea) with a median speed of 4.96 ms–1. The PWV was high when the temperature was between –15ºC and –11ºC. During the dates identified as a katabatic event between 21:30 UT of 28th November and 18:40 UT on 29th November, the wind blew from the Southeast-South direction (from the Ross Ice Shelf) with a maximum speed of 10.92 ms–1. The PWV increased ~1.4 mm (23%) from the mean value, indicating severe wind during this event which had pronounced effect on GPS observations.
A feasible production of poly (methyl methacrylate)@alloy (gold-silver) core shell has
been presented as candidate in enhanced detection of surface enhanced Raman scattering
(SERS). Free emulsifier- emulsion synthesised PMMA sphere with average size of 419 nm in
diameter were used as core material for incorporation of alloy nanoparticles (6 nm) resulting
a core-shell structure. The fabrication of PMMA@alloy SERS substrate was successfully
done via self-assembly thus the produced SERS substrate that comprise of unique optical
properties combination arising from periodic core arrangement and plasmonic activity of
alloy nanoparticles. Alloy is bimetallic nanoparticles in which the combination of silver
(Ag) and gold (Au) present an absolutely improved light resistance as compared to single
metal alone with great surface plasmon resonance. Morphology and elemental analysis was
performed through scanning electron microscope (SEM) and the analysis showing species of
both Au and Ag in single alloy nanoparticles. The alloy nanoparticles were also observed to
homogenously coating the PMMA sphere. Surface plasmon resonance activity was maximum
at 476 nm obtained from UV-Visible spectroscopy. High surface production was observed
to have periodically arranged PMMA@alloy core -shell and potentially to be used as SERS
substrate.
This paper introduces a method for modification of the formula of the fractal box counting dimension. The method is based on the utilization of the probability distribution formula in the fractal box count. The purpose of this method is to use it for the discrimination of oil spill areas from the surrounding features e.g. sea surface and look-alikes in RADARSAT-1 SAR data. The result showed that the new formula of the fractal box counting dimension was able to discriminate between oil spills and look-alike areas. The low wind area had the highest fractal dimension peak of 2.9, as compared to the oil slick and the surrounding rough sea. The maximum error standard deviation of the low wind area was 0.68 which performed with a 2.9 fractal dimension value.
In this multiple-subject study, intrinsic couplings between the primary motor (M1) and supplementary motor areas (SMA) were investigated. Unilateral (UNIright and UNIleft) self-paced tapping of hand fingers were performed to activate M1 and SMA. The intrinsic couplings were analysed using statistical parametric mapping, dynamic causal modeling (DCM) and Bayesian model analysis. Brain activation observed for UNIright and UNIleft showed contralateral and ipsilateral involvement of M1 and SMA. Ten full connectivity models were constructed with right and left M1 and SMA as processing centres. DCM indicated that all subjects prefer M1 as the intrinsic input for UNIright and UNIleft as indicated by a large group Bayes factor (GBF). Positive evidence ratio (PER) that showed strong evidence of Model 3 and Model 6 against other models in at least 12 out of 16 subjects, supported GBF results. The GBF and PER results were later found to be consistent with that of BMS for group studies with high expected posterior probability and exceedance probability. It was concluded that during unilateral finger tapping, the contralateral M1 would act as the input centre which in turn triggered the propagation of signals to SMA in the same hemisphere and to M1 and SMA in the opposite hemisphere.
Supercapacitors attract great interest among researchers as energy storage devices due to
their high power capability and long cycle life. In this research, the electrochemical performance
of electrical double layer capacitor (EDLC) based solid bio-polymer electrolyte
(SBE) was studied. SBE consists of carboxymethyl cellulose (CMC) and ammonium nitrate
(NH4NO3) was prepared by solution casting technique. The electrical impedance spectroscopy
was used to verify the conductivity of SBE. The average conductivity was achieved
at ∼ 10−3 S/cm. This research aims to prepare SBE and apply in the fabrication of EDLC.
Scanning electron microscopy analysis showed the smooth and homogeneous surface of SBE
film without any phase separation, while irregular shape and sizes of particles was found
on the surface of electrode. Elemental identification results yielded that all corresponding
elements presence in the SBE and electrode. The EDLC performance was characterized
using galvanostatic charge-discharge at different constant currents. Charge-discharge studies
showed that long discharge time (90 minutes) within 11 cycle was observed at 2µA. The
highest specific capacitance of 1.8 F/g was discovered at 4µA. This study showed that EDLC
based SBE has a promising potential to be applied in low current applications.
The Ministry of Science Technology and Innovation (MOSTI) Angkasawan (Astronaut) Programme achieved its mission to send the first Malaysian astronaut Sheikh Muszaphar Shukur by Soyuz TM11 to the International Space Ship (ISS) on 10 October 2007. He returned to earth, landing safely on 21 October 2007. Such a momentous event has carved out yet another milestone in the country’s
history and development of a civilisation based on science and technology for its people. This mission has provided the educational sector with an opportunity to initiate a curriculum innovation. Together with the Ministry of Education (MOE), the initiative was undertaken to improve techniques of teaching and learning (TL) and to broaden its scope to include space science and technology.
In this study, Global Positioning System (GPS) simulation was employed to study the effect of radio frequency interference (RFI) on two hand-held GPS receivers; Garmin GPSmap 60CSx (evaluated GPS receiver) and Garmin GPSmap 60CS (reference GPS receiver). Both GPS receivers employed the GPS L1 coarse acquisition (C/A) signal. It was observed that the interference signal power levels required to affect the location fixes of the GPS receivers were significantly high compared to the corresponding GPS signal power levels. The noiselike C/A code structure, which modulated the L1 signal over a 2 MHz bandwidth, allowed for the signal to be received at low levels of interferences. The evaluated GPS receiver had better RFI operability as compared to the reference GPS receiver. This is because the evaluated GPS receiver had higher receiver sensitivity, allowing it to have increased carrier-to-noise density (C/N0) levels for GPS satellites tracked by the receiver. The absence of other error parameters, including ionospheric and tropospheric delays, satellite clock, ephemeris and multipath errors, and unintentional signal interferences and obstructions, resulted in the required minimum jamming power levels in this study to be significantly higher as compared to field evaluations. These minimum jamming power levels vary with location and time. This was due to the GPS satellite constellation being dynamic, causing varying GPS satellite geometry over location and time, resulting in the minimum required GPS jamming power levels being location / time dependent. In general, the lowest minimum jamming power levels were observed for readings with the highest position dilution of precision (PDOP) values, and vice versa.
In this paper, an improved method of reducing ambient noise in speech signals is introduced. The proposed noise canceller was developed using a computationally efficient (DFT) filter bank to decompose input signals into sub-bands. The filter bank was based on a prototype filter optimized for minimum output distortion. A variable step-size version of the (LMS) filter was used to reduce the noise in individual branches. The subband noise canceller was aimed to overcome problems associated with the use of the conventional least mean square (LMS) adaptive algorithm in noise cancellation setups. Mean square error convergence was used as a measure of performance under white and ambient interferences. Compared to conventional as well as recently developed techniques, fast initial convergence and better noise cancellation performances were obtained under actual speech and ambient noise.
Introducing CO2 flux as the carbonate source had an effect on the carbonate content of carbonate apatite (CAp) synthesized by solid state reaction. The reactants were CaCO3 and beta-tricalcium phosphate (β-TCP) and the heat treatment in air was performed at 1250ºC followed by instant cooling in CO2 flux for temperatures ranging from 800ºC room temperature (RT) . The influence of CO2 flux at various temperature drop differences in the cooling process (1250ºC RT, 1250ºC–500ºC, 1250ºC–600ºC, 1250ºC–700ºC, and 1250ºC–800ºC) was tested to optimize the carbonation degree and subsequent effects on the physical and mechanical properties of CAp. Thermally treated samples revealed an increasing degree of carbonation, achieving a maximum of 5.2 wt% at the highest (1250ºC RT) and a minimum of 2.7 wt% at the lowest (1250ºC–800ºC) temperature drop differences, respectively. This showed that the carbonate content was correlated with the increase in exposure to CO2 flux. However, consistent compressive strength, tensile strength, density and porosity were observed against increasing temperature drop differences which indicated that the degree of carbonation exerted no influence on the physical and mechanical properties of CAp. This method enabled the synthesis of solid state CAp simply by exposing calcium phosphate mixtures to CO2 flux. It also allowed the control of carbonate content for desired medical applications.