This study investigated the thermal properties of three room temperature curing adhesives containing nano particles which were thixotropic and shear thinning which allowed injection into overhead holes when exposed to different environmental conditions. Viscosity and shear stress of the adhesives were measured as a function of shear rate. The thermal behaviour of the adhesives were measured using dynamic mechanical thermal anylisis following exposures to different temperatures and humidities which included temperatures of 20 degrees Celcius, 30 degrees Celcius and 50 degrees Celcius, relative humidities of 65% RH, 75% RH 95% RH soaked in water at 20 degrees Celcius and placed in the oven at 50 degrees Celcius. The dynamic thermal properties reported include storage and loss modulus, the loss tangent and the glass transition temperature ( Tg ). For nano- and micro-particles filled adhesives, the Tg increased with the temperature increase, even though the adhesives was subjected to high humidity and this was due to further cross-linking. The results showed that room temperature cured epoxies were only partially cured at room temperature.
The unsustainable harvesting of sea cucumbers in the Straits of Malacca poses a danger of collapsing population of this marine resource. Recent survey revealed the absence of commercially important sea cucumber species like Stichopus horrens was alarming since there were a lot of taxonomical complications in identifying species from this genus. The knowledge of taxonomy and ecology is an integral part in determining resource management strategies and conservation of marine resources like sea cucumber.
Malaysia is currently poised to introduce its Science, Technology and Innovation (STI) Policy and Act to bolster the nation's efforts at economic and social transformation. In championing this initiative, the Academy of Sciences Malaysia, while continuing to advise the Government on STI issues of the day, has made major strides in taking stock of the country's STI strengths in the various sectors of the economy as well as weaknesses that need to be addressed in terms of human capital development. In this article, the author examines the level of research expertise presently in the country in the field of chemistry, and elaborates on the four key areas of energy, catalysis and chemical synthesis, materials science and biological chemistry which will be researched globally in the next few decades that we would also need to be engaged upon to remain competitive. Intended for a wider audience than chemists alone, the descriptive sections in the article by and large belie an interdisciplinary flavour. The article also advocates the need for a more thorough road mapping exercise of the STI efforts in chemistry across the spectrum of academia and industry and makes some recommendations towards forging strong collaborations in research between the universities, public research institutes and the industry which are seen as vital in providing cross-cutting chemical solutions throughout the value chains and to the success of technologies identified as critical to the nation.
This article uses finite volume and finite element methods for optimization of the artificial hair cell sensor. The performance of the sensor was investigated for different materials such as sicon and polysilicon and by varying hair cell dimensions including width and length. The silicon material which has low young modulus was proposed based on the simulation performance. The performance of the hair cell sensor was achieved by increasing the hair cell length while increasing the width did not significantly influence the performance. The
performance of the sensor was studied for its viscous force, deflection, von mises stress and sensitivity. From the simulation, the hair cell with a length of 1600 µm and 80 µm width was suggested for the subsequent analysis. Another way to improve the performance was by modifying the hair cell geometry and it was proved that the modified hair cell was more sensitive, based on the deflection. The angle of flow that hit the hair cell also affected the deflection of the sensor where the zero angle flow which was parallel to the substrate was the most effective angle. The limitations of the performance of hair cell for various fluid velocity were also discussed in this paper.
Systems perspectives are fundamental in driving technological improvements and yield-enhancing strategies that improve agricultural productivity. These can resolve farmerʼs problems and are important pathways for sustaining food and nutritional security for human welfare in Asia. The essential determinants of this objective are the capacity to efficiently manage the natural resource base (land, crops, animals, and water) to resolve constraints to farming systems, and notably the integration of multiple research and development (R&D) issues through all levels of formal and non-formal learning systems. Both formal and informal education systems are important, with the former relating more to universities and colleges, and the latter to the intermediate level. Graduates from this level have the primary responsibility of introducing improved technologies and change to farmers, mainly along production and disciplinary pathways.The traditional research–extension–farmer model for technology delivery is no longer acceptable, due to “top down” extension functions and prescriptions, ineffectiveness to cope with the dynamics of production systems, complex interactions within the natural resources, effects of climate change and globalisation. There are also reservations on the technical capacity and skills of extension agents, constraints identification, methods for technology diffusion and dissemination, and innovative use of beneficial technological improvements that can directly respond to the needs of small farmers, and impact on subsistence agriculture. Agricultural education and systems perspectives are therefore an overriding compelling necessity which transcends prevailing limitations to waning agriculture and rural growth. Their wider recognition and applications provides an important means to maximise efficiency in the potential use; of the natural resources, increase engagement and investments in agriculture, promote ways to become more self-reliant in the development of crucial new technologies and intensification. These together can meet the challenges of the future and overcome the legacy of continuing poverty, food and nutritional insecurity. Asian farming systems, with their diversity of crops and animals, traditional methods, multiple crop-animal interactions, numerous problems of farmers present increasingly complex issues of natural resource management (NRM) and the environment. Many if not all of these can only be resolved by interdisciplinary R&D, which overcomes a major weakness of many R&D programmes presently and in the past. Improved education and training is a powerful and important driver of community-based participation aimed at enhancing sustainable food security, poverty reduction and social equity in which the empowerment of women in activities that support organising themselves is also an important pathway to enhance self-reliance and their contribution to agriculture. A vision for the future in which improved agricultural education in a systems context can provide the pathway to directly benefit the revitalisation of agriculture and agricultural development is proposed with a three-pronged strategy as follows:
Define policy for the development of appropriate curricular for formal agricultural education that provides strong multi-disciplinary orientation and improved understanding of the natural resources (land, crops, animals and water) and their interactions
Organise formal degree education and specialisation at the university level that reflects strong training in understanding of agricultural systems; systems perspectives, methodologies and their application, and
Define non-formal education and training needs that can be intensified at different levels, including the trainin of trainers as agents of change.
Throughout the years, the construction industry has made an important contribution to the Malaysian economy. Moreover, the Ninth Malaysia Plan (2006–2010) has also played a significant role in the demands of executing major residential housing project developments where it has been observed that construction waste was one of the priority waste streams. Due to the increasing number in the population that is actively involved in economic activities, and the modernization of the country, the types of construction waste that are being produced, and identifying the source such as waste are becoming more complex. Therefore, appropriate actions and approaches are needed to be taken with respect to its effective management in handling the solid waste from construction sites. This paper is intended to review the issues and the challenges enclosed within the supply chain management mechanisms in order for improving construction waste management. Throughout this review, useful information and better understanding concerning the current issues, challenges and the supply chain management mechanisms would be made inclusive in the field to be explored. The findings would also assist in improving the quality and awareness on the construction waste management that is being practiced.
Molecular markers have been intensively used in assisting breeding to reduce the time taken by conventional breeding as well as helping introgression of specific traits. Baseline analysis of known markers is crucial in developing a genetic database on disease and pest resistance for local rice germplasm which does not yet
exist. In this study seven local rice varieties, including the popular MR219 and MRQ 74 and MRQ 76 (newly developed aromatic rice varieties), together with a foreign variety, Intani-2, were screened for genetic markers related to pest and disease resistance. One hundred and twenty-two type-related markers (SSR, STS, InDel and Allele-specific) for genes resistant to bacterial leaf blight, blast and brown planthopper were screened using PCR amplification and validated by sequencing. It was found that each variety had its own pattern of resistance. Using allele-specific markers namely pBPH9, pTA248 and Pisbdom were found to be the most efficient way to screen for the targeted genes. Of the seven varieties, MR219 and MR232 were found to have the highest distribution of markers for resistance genes against pest and diseases studied.
Nowadays, construction and demolition waste has become a major issue to environmental problems faced by many countries. This concern comes from the inefficiencies of waste management which includes the waste generated from construction and demolition activities. In Malaysia, there is a lack of database records on construction waste and this has affected proper management planning of the waste. As there is a lack of policy on construction waste management, control on construction waste disposal is very hazy and this has aggravated environmental problems and exhausted landfill usage and increased illegal dumping. This paper reviews the critical issues on construction waste management and also discusses several estimation models on construction waste generation from several countries. Based on the review, most of the countries faced problems regarding construction waste management and the models developed were considered as one of the methods which could be adopted for better management of construction wastes.
The paper seeks to assuage the fears and worries over living modified organisms (LMOs). It describes how any research carried out on LMOs as well as any release activity on LMOs for public use in Malaysia is controlled by the Biosafety Act 2007. Stringent risk assessment of the LMO and its product/s is carried out to eradicate or minimize the negative effects of these on animal and human health, and to biological diversity and the environment. In contrast, no such risk assessment is carried out on introduced exotic species, or on the products of other types of technology, with the exception of pharmaceuticals. Examples are given comparing risk assessment on LMOs and exotic species.
Research and development trends will continue to design innovative composite foods in which muscle proteins are combined with non-conventional animal products, non-meat proteins and functional food additives, many of which have lost their original inherent properties and characteristics. Composite food are products with meat, non-meat proteins, fats, carbohydrates and functional ingredients such as pre-emulsion, probiotics, enzymes, bioactives, peptides, hormones, emulsifiers, gelatin, animal fats/oils, alcohol and visceral tissues. Traceability of halal meat raw materials should start at the point of animal breeding, production to the stage of halal slaughter, processing operations and final point of consumption. Traceability of food additives used in the food industry remains a major hurdle for the Muslim community seeking halal food. The processes and technological advancements made in raw material processing, ingredient extractions, modifications, purification and resynthesized into many food ingredients make the question of traceability and solving of the materials and processes that are halal a monumental task. Food is only halal if the entire food chain from farm to table, is processed, handled and stored in accordance with the syariah and/or halal standards or guidelines, such as in the Jabatan Kemajuan Islam Malaysia (JAKIM): General guidelines, Malaysia Standards MS 1500:2009 and Codex Alimentarius (Food Labeling). Here lies the challenge and importance of traceability to verify the ‘wholesomeness’ of the sources of halal raw materials and final meat-based food products.
Over the last century, the earth’s climate has changed. It is a serious global, long-term problem which involves complex interactions. A lot of evidence suggests that most of the observed factors contributing to the crisis over the last 50 years can be attributed to human activities. Malaysia has always been vulnerable to extreme climatic events such as typhoons, floods and drought. We expect climate change to exacerbate these vulnerabilities. To ensure, that our water resources will always be secure and ready for use. We need to create awareness in the public and the policy makers so that they will acknowledge that the climate change issue is real. They also need to accept that actions to adapt with our vulnerabilities should be immediately put in place. We can do this by integrating the various sector policies and securing the participation of all stakeholders in Malaysia and other countries.
A 'green tyre' concept has the advantage of low rolling resistance, improved wet grip and enhanced handling. It has been reported that 3% decrease in rolling resistance is equivalent to 1% fuel saving, thus giving the 'green tyre' economic benefits and customer satisfaction. In this study, epoxidised natural rubber (ENR) compounds containing various loading of silica filler were prepared. The processibility and viscoelastic properties were investigated using the rubber processing analyser and Mooney viscometer. Results showed that the properties were adversely affected by the poor dispersion of silica as supported by the bound rubber measurement. In addition, a reversion in the cure behaviour was also observed as the curing temperature was increased to 170ºC.
The human brain generates different oscillations at different frequencies during various consciousness levels. When these brain waves synchronize with exogenous rhythmic stimulation, the brain experiences strong, yet relaxing emotion that could be involved in the formation of memory. We investigated the character of rhythmic oscillatory dynamics by electroencephalography (EEG) of subjects listening to a short verse of the Holy Quran compared to resting and Arabic news listening. The mean power amplitudes of each frequency band for wavelet-based time-frequency analysis were obtained from 5000 ms of segmented EEG recordings during rest, news and Quran listening conditions. The time series analysis of power from each of three conditions in each frequency band from the grand averaged data was then subjected to autocorrelation study. The results showed significant cyclic overall trends of increasing and decreasing patterns of power in the low frequency brain wave oscillation of different head regions especially global, frontal and temporal sites. These results provided a basis for prediction of the periodicity of the power of the oscillatory brain dynamics of delta and robustly in theta regions which occurred during Quran listening. Despite several limitations, our data offered a plausible scientific basis to the emotional induction during Quran listening that mimics recognized as data from music listening studies. This offered a promising perspective for future studies in translational neurophysiological, cognitive and biofeedback on Quran listening to modify brain behaviour in health and disease.
Hydraulics simulation can be used as a supporting tool for planning and developing a framework, such as Integrated Flood Management for river management. To demonstrate this, a hydraulics model for the Sarawak River Basin was run using InfoWorks RS software by Wallingford Software, UK. InfoWorks River Simulation (RS) was chosen because its applicability has been proven and widely used to model Malaysian rivers. The extraction of computed floodwater level and flood maps for different time intervals would produce the rate of floodplain submergence from river bank level. This information could be incorporated into a logical framework to support decisions on flood management measures. Thus, hydraulics models can be used as tools to provide the necessary decision parameters for developing logical frameworks which would act as to guide the planning when it involved various stakeholders’ participation.
Epilepsy is a neurological disorder characterized by recurrent seizures resulting from excessive abnormal electrical discharges in the brain. Medicinal plants may play an invaluable role to discover the new antiepileptic drugs. The aim of the present study was to investigate the anticonvulsant activity of α-terpineol isolated from Myristica fragrans Hountt. The α-terpineol showed a significant inhibition of the seizure episodes and spikes in absence seizures model of Genetic Absence Epilepsy Rats from Strasbourg (GAERS) rats by using electroencephalography records. It showed dose-dependent anticonvulsant activity that was comparable to the known antiepileptic drug of diazepam. It showed a rapid onset and relatively short duration of anticonvulsant effects. The present findings suggest that α-terpineol might possess antiepileptic activities against the partial seizures of human because it prevented seizures in well-established genetic absence seizure animal model of GAERS rats.
Since its invention, polyimide (PI) has been widely used in micro-electro-mechanical system (MEMS) devices. For fabrication, the PI membrane, PI-2723 HD-Microsystems was used as the membrane material due to its Young's modulus of 2.7 GPa and its film thickness could easily be controlled by changing the speed of the spin coater system. The application PI as membrane structure on silicon wafers therefore gave a much better mechanical performance then conventional membranes made of silicon dioxide (SiO2) or silicon nitride (Si3N4) layers. The fabrication of PI membrane was the same as for SiO2 and Si3N4 membranes; the basic step was to etch a side of the silicon wafer using wet anisotropic etching. This paper proposes an effective process for fabrication of PI membrane with f ast and little supervision. In this process, a dual step process was wet anisotropic etching of single crystal silicon using pottasium hydroxyl (KOH) with different concentrations and temperature processes. For the first process, 45% KOH under boiling temperature was used to etch at least 90%–95% of the silicon. In the second process, the silicon was submerged in 45% KOH with temperature at 70ºC–80ºC to etch away the residual silicon until a clean and transparent PI membrane was achieved. Using this method, the fabrication of PI membrane could be generated fast.
Cassava starch was used as feedstock for production of bioethanol by Saccharomyces cerevisiae. The cassava starch was hydrolyzed using commercial α-amylase and glucoamylase enzymes followed by a batch ethanol fermentation process using saccharified starch slurry. By using 110 g/L of reducing sugar from saccharified starch slurry, the ethanol yield was promising with maximum ethanol concentration of 20.6 g/L recorded after 55 hours of cultivation process. Three different models - the Logistic model, Luedeking-Piret-like equation and Gompertz equation - were used to characterize and explain the cell growth, reducing sugar consumption and production formation, respectively. The kinetic parameters were estimated by fitting the experimental data to the proposed models using non-linear regression analysis. The correlation coefficient r2 values for the Logistic model, Luedeking-Piret-like equation and the Gompertz equation were 0.994, 0.996 and 0.990, respectively. The high correlation coefficient values indicate that the proposed models were able to describe the ethanol fermentation process.
The pursuit, initiation and establishment of multi-stakeholder partnerships, including with the private sector, is often a critical component of attaining and achieving the success and sustainability of many projects the world over. However, the soliciting and securing of socially, economically and environmentally constructive engagements between the private sector on the one hand, and the NGOs, CBOs and local communities on the other hand, is in reality much easier said than done. Notably, since most private sector corporations undoubtedly tend to leave behind various "ecological footprints", differing only in their size and depth, stemming from their respective forms and functions, and their ensuing impacts and implications. The interplay between the civil society and the private sector, especially for resource mobilization. (Copied from article).
A monitoring procedure was introduced for process variability in a multivariate setting based on individual observations which was a combination of (i) robust high breakdown point approach in the set-up stage to determine the reference sample and (ii) the use of Wilks chart in the mass production stage. This setting is what the Malaysian manufacturing industry is currently lacking in, especially when a robust approach must be used. The advantage of this procedure was revealed by using the case of a female shrouded connector production process in a Malaysian industry. Moreover, this procedure could also be used in any process quality monitoring and for any industry. A recommendation for quality practitioners was also addressed.
Malaysia is the world’s top manufacturer of examination and surgical natural rubber (NR) gloves, exported mainly to the USA and Europe. The glove manufacturing process yields effluent which must be treated to comply with the stringent regulatory requirements imposed by the Malaysian Department of Environment. To make glove manufacturing an eco-friendly process, efforts are geared towards minimizing and utilizing waste or converting it into raw material for making value-added products. Waste generated from the glove industry is mainly rubber sludge which is obtained from the chemical flocculation stage of the effluent treatment process and consists of mainly rubber, remnants of compounding ingredients and water. R&D work by the Malaysian Rubber Board on waste utilization and resource recovery investigations have revealed many uses for this sludge. This paper briefly outlines only one of the many options available, which is the conversion of the sludge into sludge derived fuel (SDF). Preliminary study has identified three formulations of SDF with calorific values (CV) exceeding 16 000 kJ/kg, matching a good grade coal. This was considered as promising results which warrant explorative work for further increasing the CV of SDF to turn it into a viable fuel substitute in the latex products manufacturing industry and subsequently apply for a Clean Development Mechanism status to generate income.