A postal questionnaire concerning the Malaysian dentists' attitudes towards their patients yielded a 73.1% response rate. The results of this study indicated that a majority of dentists felt that patients had more negative than positive attributes. Private practitioners attributed more negative traits to their patients than their public sector colleaques. About 88% of dentists indicated that the most negative patient attribute was fear of pain. Fear of pain was perceived to be stronger than fear of the dentist (62.2%). likewise the patients' inability to seek treatment soon enough (78.4%), to come for regular check-up (72.7%) and to follow advice on personal oral hygiene(70.1%) were worrisome.
A 73.1 percent response rate was obtained in a postal questionnaire survey conducted among Malaysian dentists to assess their attitudes and needs for continuing dental education. It appeared that on an average the Malaysian dentist spent very little time on continuing education,reading journals and participation in professional dental meetings.The need for continuing education was strongly evident as almost all dentists indicated that such activities be further developed in Malaysia. Crown and Bridgework, Oral Surgery and Orthodontic appeared to be areas in which more continuing education were required.
The effect of filler content and storage conditions such as drying, storing in water and thermal cycling on linear dimensional changes were investigated and evaluated. The dimensional accuracy studies were performed using a specific designed mould and a coordinate measuring machine. The findings gave support to the view that tiller content is an important factor influencing the physical and mechanical properties of the composite inlay material. The higher tiller content gave less polymerization shrinkage. The greatest linear shrinkage recorded was 0.79 %. The average linear shrinkage (in air, water and thermal cycling) for 79 % filler Prisma AP.H was 0.33 %, for 65 % tiller Prisma AP.H was 0.35 % and for 50 % filler Prisma AP.H was 0.42 %. Generally, dimensional changes was greatest when stored dry. This was followed by materials which were thermal cycled. The least dimensional change recorded was when the materials were stored in water.
The aims of this study were to determine the prevalence and factors that influenced smoking behaviours among male adolescents in Kuantan, Pahang. A cross-sectional study was conducted among the form four male students in Kuantan District. Three hundred and twenty three students were randomly selected from eight secondary schools. A self-administered questionnaire was distributed to all the respondents. Almost half of the sample was smokers (45.8%) and half of them were Malays (53.1%). Students whose parents had lower level of occupation were more likely to smoke (58.8%). Among smokers, 34.5% of them smoked since primary school and a majority (91.7%) smoked 10 or less cigarettes per day. Half of them (53.4%) reported that they bought loose cigarettes and most of them used their school pocket money to purchase the cigarettes (81.7%). From the multivariate analysis, it was found that Non-Science Stream classes (OR=3.92, 95% CI= 2.10, 7.32), peers' smoking (OR=6.07, 95% CI= 2.32, 15.92), and attitude towards smoking (OR= 21.93, 95% CI= 9.71,49.51) were significantly associated with smoking habit. The prevalence of smoking among male adolescents was considerably high'in this population. It is recommended that antismoking activities in school be carried out regularly and should involve an active participation from the adolescents themselves since peers have great influence on smoking habits.
The role of smoking as a contributory factor in the progression of the periodontal disease process has long been suspected and recently a large number of studies have been published in the dental literature regarding this possible role. Much of the literature has also indicated that smokers affected with periodontitis respond less favorably to periodontal treatment be it non-surgical, surgical and regenerative. This paper will review the current literature regarding the effects of smoking on various aspects of the periodontal disease process and present an explanation for the possible association between smoking and the progression of periodontitis.
To explore the association between social
support and stress levels in preclinical and clinical dental
students in Malaysia. Method: A cross sectional survey
of dental undergraduate students was conducted at the
Faculty of Dentistry, University of Malaya, Universiti
Kebangsaan Malaysia and Universiti Sains Malaysia.
Stress was measured using the Dental Environment Stress
(DES) questionnaire. A DES-32 item was used to measure
stress for the clinical students and DES-16 item for the
preclinical students. Four questions were used to measure
social support. The total stress scores were standardized
for comparison purposes. Results: A total of 357 (79.7%)
preclinical and 417 (71.8%) clinical undergraduate dental
students responded to the questionnaires. The clinical
students experienced higher stress [mean standardized
DES score = 72.63, SD = 10.64] than preclinical students
[mean standardized DES score = 70.19, SD=12.01]. The
two most stressful items reported by preclinical students
were “fear of failing” and “examination and grades”.
Among clinical students, the two most stressful items related
to academic were “completing course requirement” and
“fear of failing course” and items related to clinical session
were “fear of being barred due to the clinical schedule”
and “patients late or absent”. Multiple regression analyses
revealed that low stress levels among preclinical students
were significantly associated to a lot of contact with
students of the same course. Conclusion: To some extent,
social support does play a role in explaining differences in
perceived stress, in particular among preclinical students.
Objective: An in vitro assessment of MG-63 human osteosarcoma cells' alkaline phosphatase (ALP) activity when in contact with calcium hydroxide powder (CH), paste (CHP) and grey mineral trioxide aggregate (MTA). Methods: MG-63 cells were seeded to the three selected materials for durations of 0.25, 0.5, 1, 24, 48 and 72 hours. BCIP-NBT assay was used and ALP activity quantified using ELISA reader at 410 nm. Results: The overall analysis for ALP activity indicated significant interaction between test materials and control (maintenance medium). Subsequently, the test materials were paired and analysed for initial (0.25, 0.5, 1 hour) and delayed response (24, 48 and 72 hours). During the initial response, CH exhibited an increased ALP activity compared to MTA. This interaction was not dependant on duration. The delayed response exhibited elevated ALP activity with CHP when compared to MTA and CH. The interaction of CHP was dependant on duration. Conclusion: All three materials exhibited increased ALP activity.
The aim of this retrospective study was to study the clinical patterns of oro-facial infections presented and their management (or trends of management) at the Department of Oral and Maxillofacial Surgery, Dental Faculty, University of Malaya. These included the predisposing factors, presentations and management. This study reviewed the oro-facial infection cases over 15 years. The data was obtained from case note reviews of patients using specially designed proforma. A total number of 409 samples were included in this study. Majority of the patients were generally healthy with about 6.6% having diabetes mellitus. The common presentations were pain (47.4%), pus discharges (16.9%) and limitation of mouth opening (12.5%). The major site was in the submandibular region (18.9%) followed by cheek (13.2%). Most of the infections were from odontogenic source (63.2%). Other sources includes cysts (15.4%) and tumours (6.7%). Incision and drainage were the treatment of choice performed on 57.55% of patients. Monoantimicrobial therapy was the treatment instituted in 20.8% of cases.
Saliva collection is non-invasive and less stressful when compared with blood collection. Extensive studies on saliva has been carried out and the use of saliva as a biological sample in clinical diagnosis and for monitoring hormones, drugs and pollutants and viruses has been recommended. The complexities associated with saliva such as proper collection device and strict standardisation of a number of factors which include time of collection, types of saliva and storage made it less favourable to blood.
Breast-feeding offers many benefits to the baby and the mother. For instance, breast milk provides the right balance of nutrients to help an infant grow into a strong and healthy toddler. Even though breastfeeding is a natural process, it is not always easy. In certain situations, some mothers are unable to breastfeed their babies or the babies are unable to adapt to breastfeeding. This will lead to the use of bottle-feeding. The effect of breast-feeding and bottle-feeding on physical growth has been well established but less has been concentrated on the craniofacial growth and dental development. This review reveals the effects of breast-feeding and bottle-feeding on craniofacial growth and dentoalveolar development based on the available literature.
Missing teeth can be due to hypodontia, trauma or extraction. In general, the options for treatment depend on the severity of the hypodontia and the severity of the malocclusion. Occasionally, the space from missing teeth has to be maintained for prosthetic replacement and require an orthodontic/restorative approach. It is very important to ensure the space maintained is adequate for aesthetic reason so that it can be replaced with a prosthesis after the orthodontic treatment is completed. This article discusses a new innovation and clinical technique for maintaining this space during orthodontic treatment by using an acrylic tooth with several modifications. This innovation will be illustrated using two cases.
Choosing the right light-curing unit can be a very difficult task for some orthodontists. Currently, there are various types of light curing units available in the market with various trade names and specifications. Most of the time information regarding light curing units is obtained from advertisements, websites or manufacturers’ catalogues. Sometimes such information can be misleading. This article attempts to provide several tips for orthodontists in selecting light curing units.
Introduction: Owing to the variety of materials and methods employed, comparison of the results and findings from bonding studies is difficult. Until recently, several types of teeth have been used in published research papers as a substrate in orthodontic bonding research including bovine incisors, fresh and rebonded human premolars. Objectives: The purpose of this study was to compare the shear bond strength of an adhesive bonded to different tooth surfaces (human premolar, bovine incisor and rebonded human premolar). Methods: Two groups of thirty premolar teeth and one group of bovine incisors had brackets attached in a standardized manner using Transbond XT (3M Unitek). The adhesive was cured using conventional halogen light and a specially designed tool to standardize the distance between the light curing tip and the adhesive. The debonding force was measured using Instron universal testing machine. ANOVA and Post Hoc Dunnett C test were performed to determine any significant difference among groups (p
The purpose of this study was to investigate the light intensity of selected light curing units with varying distance and angulation of the light curing tip and lightmeter. Materials and method: Four types of light units; Spectrum 800 (Dentsply), Coltulux 3 (Coltene), Elipar FreeLight 2 (3M Espe) and Starlight Pro (Mectron) were evaluated for light intensity at various distances between the light curing tip and the radiometer Cure Rite Denstply (0,1,3,5,10 and 15 mm). The light curing units were tested at right angles to the aperture of the light meter and at the angles of 45°, 60° to it at a standardized 5 mm distance. Results: The highest light intensity was obtained when the tip of light curing unit was in contact with the lightmeter aperture. The light intensity decreased significantly when the light tip was placed 5mm, 10mm and 15mm away from the lightmeter aperture. However, no significant differences (p> .05) were detected between Omm, Imm and 3mm. There was a decrease in light intensity when light~·tip was angulated at 45° and 60° except for Coltolux 3. Conclusions: The intensity of the curing light was affected by the distance between the light curing tip and the lightmeter. However, the decrease in light intensity of the light curing unit was found not to obey the inverse square law for the distances 0 to 15 mm. The study found that there was no significant difference between 45° and 60° angulation between the light curing tip and the lightmeter. However, the decrease in light intensity was significant when compared to the light tip placed perpendicular (90°) to the aperture of the light meter.
The population in Malaysia use various types of health and food supplements. These products are considered safe and are used without any concern for their toxicity. Among the products used as health supplements are products that contain lactic acid bacteria. This project studied the acute and subacute toxicity of a product containing minerals, herbs, vitamins and live lactic acid bacteria, on Sprague- Dawley rats. Acute toxicity was tested 24 hours after a single dose and subacute toxicity was studied 24 hours after 7 days of daily dosing. The parameters that were studied were alanine aminotransferase (AL T,SGPT), aspartate aminotransferase (AST, SGOT), serum urea, ratios of weight of kidney and liver weight to body weight and percentage changes in body weights. The contents of capsules of the product (6, 8 or lO capsules for acute studies and 6, 10 and 12 for subacute studies) were mixed with corn oil and fed orally to rats. Control rats were fed with corn oil alone. In the acute studies, the level of ALT in the rats treated with the contents of the capsule was lower than controls. There were no significant changes in the other parameters of the rats in the treatment groups as compared to controls. There were no significant differences in all the parameters between rats in the treatment groups as compared to controls in the subacute studies. Sprague-Dawley rats fed with high doses of the product did not show signs of toxicity in the parameters that were studied.
This review intends to provide a highlight on the potential application of salivary proteomics in
periodontal diagnosis and attempts to throw light on the emerging salivary diagnostic tools for periodontal disease detection. Background: Clinical parameters for detection of periodontitis such as probing depth, attachment level, bleeding on probing, plaque index, and radiographic assessment of alveolar bone loss provide information on the severity of periodontitis, but they do not measure disease activity. Ideally, development and application of rapid and simple diagnostic tests based on host salivary or immune factors may facilitate early detection of patients at risk for periodontal diseases, allow appropriate intervention, decrease the need for more aggressive treatment and improve the response to periodontal therapy. Results: Studies have shown that saliva could be used as a diagnostic fluid as it is one of the inexpensive, noninvasive and easy-to-use diagnostic methods. Salivary constituents that have been studied as potential diagnostic biomarkers for periodontal disease includes locally produced proteins of host and bacterial origin, genetic/genomic biomarkers such as DNA and mRNA of host origin, bacteria and bacterial products, ions, steroid hormones and volatile compounds. Conclusion: Periodontal oral diagnostic devices will enable screening of large populations, more quickly and effectively. Use of salivary biomarkers to sample large populations will help to identify at-risk groups more effectively and increase access to treatment for those most at need, thereby, improving public health.
The objective of this retrospective study was to investigate what percentage of the dental students in the University of Malaya has a tooth size discrepancy. The sample comprised 40 good quality pre-treatment study models with fully erupted and complete permanent dentitions from first molar to first molar, which were selected from the dental students of the University of Malaya. The mesiodistal diameter tooth sizes were randomly measured manually from first molar to first molar using digital calliper (Mitutoyu) accurate to 0.01 mm, and the Bolton analyses for anterior and overall ratios were calculated by scientific calculator. Reproducibility analysis for intra- and interexaminer calibrations was assessed by measuring 10 study models twice, a week apart. A paired sample t-test and the correlation coefficient were used to evaluate the systematic and random errors of the measurements using Statistical Package for Social Sciences (SPSS) version 12.0. The reproducibility of the intra and inter-examiners for the sum of upper and lower mesiodistal tooth size were high (average mean difference = 0.62, r = 0.82). This study found 47.5% of the samples had anterior, and about 10% had overall· tooth width ratios greater than 2 standard deviations from Bolton's mean. Large percentage of the dental students of the University of Malaya has tooth size discrepancies outside of Bolton 2 standard deviations. It would seem prudent to routinely perform the tooth size analysis and include the findings into orthodontic treatment planning.
This paper represents a study of35casesofodontogenic keratocyst (OKC) diagnosed in a Malaysian population. The clinical, radiological and histopathological features, treatment modalities and recurrence of this lesion were analysed. There was a higher prevalence rate among Malaysian Chinese (51.42 percent), while the Malays and Indians accounted for22.86 percent and 25.72 percent respectively. The male to female ratio was 16 : 19.Age at presentation ranged from nine to 71 year,with about 70percent occurring between ages ten to 39 years. A total of40cysts were analysed. Of these, 67.5 percent occurred in the mandible and 32.5 percent in the maxilla. About 88percent of OKC presented as unilocular radiolucencies and 42.0 percent were associated with unerupted or impacted teeth. Histologically, the parakeratinized OKC was the predominant variant found (75.8 percent). The majority of caseswere treated by enucleation (85 percent), and a recurrence rate of20percent was recorded.
The current standard of managing facial bone fractures is the use of rigid internal fixation. This method provides good stabilization and repair for mid-face fractures such as the zygomatico-orbitalfracture. Nowadays, for the young and old, patients want not only rapid bone healing, but also good facial aesthetics after surgical treatment following maxillofacial trauma. Therefore, osteosynthesis of fractures and inconspicuous post-operative scars are considered essential. The lower eyelid approach or modified blepharoplasty provides rapid access to the infraorbital rim as well as the orbital floor, while the lateral eyebrow incision gives direct access for fixation at the fronto-zygomatic suture. Combining the Gillies' approach and a single form of rigid internal fixation, good cosmetic results and function can be achieved. Cases using the micro-plate-system for thin infraorbital bones and the miniplate- system for thicker facial bones involving zygomatico-orbital fractures are described.
The palatal root of the first permanent molar is the most commonly deflected root into the maxillary sinus during extraction. A rational approach to the surgical removal of a root from the antrum is important. Some surgeons prefer the alveolar approach while others prefer the Caldwell-Luc operation. A case is presented where the palatal root tip of the left upper first molar was removed from the maxillary sinus by the Caldwell-Luc approach with simultaneous closure of the oro-antral fistula resulting from dental extraction. A fibreoptic light probe was used. The advantages and disadvantages as well as how to avoid the common complications of this surgical technique are discussed. A good result was achieved with successful removal of the root and no loss of sensibility of the teeth and/or gum for this case.