In this paper, a facile synthesis method for CaFe2O4 is introduced that produces a catalyst capable of significant photocatalytic degradation of POME under visible light irradiation. The co-precipitation method was used to produce two catalysts at calcination temperatures of 550 °C and 700 °C dubbed CP550 and CP700. CP550 demonstrated the maximum COD removal of 69.0% at 0.75 g/L catalyst loading after 8 h of visible light irradiation which dropped to 61.0% after three consecutive cycles. SEM images indicated that the higher calcination temperature of CP700 led to annealing which reduced the pore volume (0.025 cm3/g) and pore diameter (10.3 nm) while simultaneously creating a smoother and more spherical surface with lower SBET (9.73 m2/g). In comparison, CP550 had a rough hair-like surface with higher SBET (27.28 m2/g) and pore volume (0.077 cm3/g) as evidenced by BET analysis. XRD data indicated the presence of CaFe5O7 in the CP550 composition which was not present in CP700. The presence of Wustite-like FeO structures in CaFe5O7 are likely the cause for lower photoluminescence intensity profile and hence better charge separation of CP550 as these structures in CaFe2O4 have been known to increase resistivity and electron localization. The COD removal of CP550 dropped from 69.0% to just 7.0% upon adding a small quantity of isopropanol into the reaction mixture indicating hydroxyl radicals as the primary reactive oxidative species.
Cities all over the world are edging further into the ocean. Coastal reclamation is a global conservation issue with implications for ocean life, ecosystems, and human well-being. Using Malaysia as a case study, the coastal reclamation trends over three decades (1991-2021) were mapped using Landsat images and Normalized Difference Water Index (NDWI) via the Google Earth Engine platform. The changes in drivers and impacts of these coastal expansions throughout the decades were also reviewed. Twelve out of the 14 states in Malaysia had planned, active, or completed reclamations on their shorelines. Between 1991 and 2021, an absolute area of 82.64 km2 has been or will be reclaimed should all the projects be completed. The most reported driver for coastal expansion in Malaysia is for development and modernization (41 %), followed by rise in human population (20 %), monetary gains from the development of prime land (15 %), and agriculture and aquaculture activities (9 %). Drivers such as reduction of construction costs, financial advantage of prime land, oil and gas, advancement of technology, and tourism (Malaysia My Second Home (MM2H)) had only started occurring within the last decade, while others have been documented since the 1990's. Pollution is the most reported impact (24 %) followed by disruption of livelihoods, sources of income and human well-being (21 %), destruction of natural habitats (17 %), decrease in biodiversity (11 %), changes in landscapes (10 %), erosion / accretion (8 %), threat to tourism industry (6 %), and exposure to wave surges (3 %). Of these, changes in landscape, shoreline alignment, seabed contour, and coastal groundwater, as well as wave surges had only started to surface as impacts in the last two decades. Efforts to protect existing natural coastal and marine ecosystems, restore degraded ones, and fund endeavours that emphasize nature is needed to support sustainable development goals for the benefit of future generations.
Impetus to minimise the energy and carbon footprints of evolving wastewater resource recovery facilities has promoted the development of microbial electrochemical systems (MES) as an emerging energy-neutral and sustainable platform technology. Using separators in dual-chamber MES to isolate anodic and cathodic environments creates endless opportunities for its myriad applications. Nevertheless, the high internal resistance and the complex interdependencies among various system factors have challenged its scale-up. This critical review employed a systems approach to examine the complex interdependencies and practical issues surrounding the implementation and scalability of dual-chamber MES, where the anodic and cathodic reactions are mutually appraised to improve the overall system efficiency. The robustness and stability of anodic biofilms in large-volume MES is dependent on its inoculum source, antecedent history and enrichment strategies. The composition and anode-respiring activity of these biofilms are modulated by the anolyte composition, while their performance demands a delicate balance between the electrode size, macrostructure and the availability of substrates, buffers and nutrients when using real wastewater as anolyte. Additionally, the catholyte governed the reduction environment and associated energy consumption of MES with scalable electrocatalysts needed to enhance the sluggish reaction kinetics for energy-efficient resource recovery. A comprehensive assessment of the dual-chamber reactor configuration revealed that the tubular, spiral-wound, or plug-in modular MES configurations are suitable for pilot-scale, where it could be designed more effectively using efficient electrode macrostructure, suitable membranes and bespoke strategies for continuous operation to maximise their performance. It is anticipated that the critical and analytical understanding gained through this review will support the continuous development and scaling-up of dual-chamber MES for prospective energy-neutral treatment of wastewater and simultaneous circular management of highly relevant environmental resources.
The threat posed by invasive non-native species worldwide requires a global approach to identify which introduced species are likely to pose an elevated risk of impact to native species and ecosystems. To inform policy, stakeholders and management decisions on global threats to aquatic ecosystems, 195 assessors representing 120 risk assessment areas across all six inhabited continents screened 819 non-native species from 15 groups of aquatic organisms (freshwater, brackish, marine plants and animals) using the Aquatic Species Invasiveness Screening Kit. This multi-lingual decision-support tool for the risk screening of aquatic organisms provides assessors with risk scores for a species under current and future climate change conditions that, following a statistically based calibration, permits the accurate classification of species into high-, medium- and low-risk categories under current and predicted climate conditions. The 1730 screenings undertaken encompassed wide geographical areas (regions, political entities, parts thereof, water bodies, river basins, lake drainage basins, and marine regions), which permitted thresholds to be identified for almost all aquatic organismal groups screened as well as for tropical, temperate and continental climate classes, and for tropical and temperate marine ecoregions. In total, 33 species were identified as posing a 'very high risk' of being or becoming invasive, and the scores of several of these species under current climate increased under future climate conditions, primarily due to their wide thermal tolerances. The risk thresholds determined for taxonomic groups and climate zones provide a basis against which area-specific or climate-based calibrated thresholds may be interpreted. In turn, the risk rankings help decision-makers identify which species require an immediate 'rapid' management action (e.g. eradication, control) to avoid or mitigate adverse impacts, which require a full risk assessment, and which are to be restricted or banned with regard to importation and/or sale as ornamental or aquarium/fishery enhancement.
The permeable (sandy) sediments that dominate the world's coastlines and continental shelves are highly exposed to nitrogen pollution, predominantly due to increased urbanisation and inefficient agricultural practices. This leads to eutrophication, accumulation of drift algae and changes in the reactions of nitrogen, including the potential to produce the greenhouse gas nitrous oxide (N2O). Nitrogen pollution in coastal systems has been identified as a global environmental issue, but it remains unclear how this nitrogen is stored and processed by permeable sediments. We investigated the interaction of drift algae biomass and nitrate (NO3-) exposure on nitrogen cycling in permeable sediments that were impacted by high nitrogen loading. We treated permeable sediments with increasing quantities of added macroalgal material and NO3- and measured denitrification, dissimilatory NO3- reduction to ammonium (DNRA), anammox, and nitrous oxide (N2O) production, alongside abundance of marker genes for nitrogen cycling and microbial community composition by metagenomics. We found that the presence of macroalgae dramatically increased DNRA and N2O production in sediments without NO3- treatment, concomitant with increased abundance of nitrate-ammonifying bacteria (e.g. Shewanella and Arcobacter). Following NO3- treatment, DNRA and N2O production dropped substantially while denitrification increased. This is explained by a shift in the relative abundance of nitrogen-cycling microorganisms under different NO3- exposure scenarios. Decreases in both DNRA and N2O production coincided with increases in the marker genes for each step of the denitrification pathway (narG, nirS, norB, nosZ) and a decrease in the DNRA marker gene nrfA. These shifts were accompanied by an increased abundance of facultative denitrifying lineages (e.g. Pseudomonas and Marinobacter) with NO3- treatment. These findings identify new feedbacks between eutrophication and greenhouse gas emissions, and in turn have potential to inform biogeochemical models and mitigation strategies for marine eutrophication.
The identification of nitrogen sources and cycling processes is critical to the management of nitrogen pollution. Here, we used both stable (δ15N-NO3-, δ18O-NO3-, δ15N-NH4+) and radiogenic (222Rn) isotopes together with nitrogen concentrations to evaluate the relative importance of point (i.e. sewage) and diffuse sources (i.e. agricultural-derived NO3- from groundwater, drains and creeks) in driving nitrogen dynamic in a shallow coastal embayment, Port Phillip Bay (PPB) in Victoria, Australia. This study is an exemplar of nitrogen-limited coastal systems around the world where nitrogen contamination is prevalent and where constraining it may be challenging. In addition to surrounding land use, we found that the distributions of NO3- and NH4+ in the bay were closely linked to the presence of drift algae. Highest NO3- and NH4+ concentrations were 315 μmol L-1 and 2140 μmol L-1, respectively. Based on the isotopic signatures of NO3- (δ15N: 0.17 to 21‰; δ18O: 3 to 26‰) and NH4+ (δ15N: 30 to 39‰) in PPB, the high nitrogen concentrations were attributed to three major sources which varied between winter and summer; (1) nitrified sewage effluent and drift algae derived NH4+ mainly during winter, (2) NO3- mixture from atmospheric deposition, drains and creeks predominantly observed during summer and (3) groundwater and sewage derived NO3- during both surveys. The isotopic composition of NO3- also suggested the removal of agriculture-derived NO3- through denitrification was prevalent during transport. This study highlights the role of terrestrial-coastal interactions on nitrogen dynamics and illustrates the importance of submarine groundwater discharge as a prominent pathway of diffuse NO3- inputs. Quantifying the relative contributions of multiple NO3- input pathways, however, require more extensive efforts and is an important avenue for future research.
The impacts of environmental stressors on polyploid organisms are largely unknown. This study investigated changes in morphometric, molecular, and biochemical parameters in full-sibling diploid and triploid African catfish (Clarias gariepinus) in response to chlorpyrifos (CPF) exposures. Juvenile fish were exposed to three concentrations of CPF (mean measured μg/L (SD): 9.71 (2.27), 15.7 (3.69), 31.21 (5.04)) under a static-renewal condition for 21days. Diploid control groups had higher hepatosomatic index (HSI), plasma testosterone (T), and brain GnRH and cyp19a2 expression levels than triploids. In CPF-exposed groups, changes in HSI, total weight and length were different between the diploid and triploid fish. In contrast, condition factor did not alter in any of the treatments, while visceral-somatic index (VSI) changed only in diploids. In diploid fish, exposure to CPF did not change brain 11β-hsd2, ftz-f1, foxl2, GnRH or cyp19a2 mRNA levels, while reduced tph2 transcript levels compared to the control group. In contrast, 11β-hsd2 and foxl2 expression levels were changed in triploids following CPF exposures. In diploids, plasma T levels showed a linear dose-response reduction across CPF treatments correlating with liver weight and plasma total cholesterol concentrations. In contrast, no changes in plasma cholesterol and T concentrations were observed in triploids. Plasma cortisol and 17-β estradiol (E2) showed no response to CPF exposure in either ploidy. Results of this first comparison of biomarker responses to pesticide exposure in diploid and polyploid animals showed substantial differences between diploid and triploid C. gariepinus.
Many wastewater treatment plants (WWTPs) operating in biological nitrogen removal activated sludge process in the tropics are facing the pressure of increasingly stringent effluent standards while seeking solutions to reduce the plants' energy consumption and operating cost. This study investigated the feasibility of applying low-dissolved oxygen (low-DO) nitrification and utilizing slowly-biodegradable chemical oxygen demand (sbCOD) for denitrification, which helps to reduce energy usage and operating cost in treating low soluble COD-to-nitrogen tropical wastewater. The tropical wastewater was first characterized using wastewater fractionation and respirometry batch tests. Then, a lab-scale sequencing batch reactor (SBR) was operated to evaluate the long-term stability of low-DO nitrification and utilizing sbCOD for denitrification in an anoxic-oxic (AO) process treating tropical wastewater. The wastewater fractionation experiment revealed that particulate settleable solids (PSS) in the wastewater provided slowly-biodegradable COD (sbCOD), which made up the major part (51 ± 10%) of the total COD. The PSS hydrolysis rate constant at tropical temperature (30 °C) was 2.5 times higher than that at 20 °C, suggesting that sbCOD may be utilized for denitrification. During the SBR operation, high nitrification efficiency (93 ± 6%) was attained at low-DO condition (0.9 ± 0.1 mg O2/L). Utilizing sbCOD for post-anoxic denitrification in the SBR reduced the effluent nitrate concentration. Quantitative polymerase chain reaction, 16S rRNA amplicon sequencing and fluorescence in-situ hybridization revealed that the genus Nitrospira was a dominant nitrifier. 16S rRNA amplicon sequencing result suggested that 50% of the Nitrospira-related operational taxonomic units were affiliated with comammox, which may imply that the low-DO condition and the warm wastewater promoted their growth. The nitrogen removal in a tropical AO process was enhanced by incorporating low-DO nitrification and utilizing sbCOD for post-anoxic denitrification, which contributes to an improved energy sustainability of WWTPs.
Microbial desalination cells (MDCs) have been experimentally proven as a versatile bioelectrochemical system (BES). They have the potential to alleviate environmental pollution, reduce water scarcity and save energy and operational costs. However, MDCs alone are inadequate to realise a complete wastewater and desalination treatment at a high-efficiency performance. The assembly of identical MDC units that hydraulically and electrically connected can improve the performance better than standalone MDCs. In the same manner, the coupling of MDCs with other BES or conventional water reclamation technology has also exhibits a promising performance. However, the scaling-up effort has been slowly progressing, leading to a lack of knowledge for guiding MDC technology into practicality. Many challenges remain unsolved and should be mitigated before MDCs can be fully implemented in real applications. Here, we aim to provide a comprehensive chronological-based review that covers technological limitations and mitigation strategies, which have been developed for standalone MDCs. We extend our discussion on how assembled, coupled and scaled-up MDCs have improved in comparison with standalone and lab-scale MDC systems. This review also outlines the prevailing challenges and potential mitigation strategies for scaling-up based on large-scale specifications and evaluates the prospects of selected MDC systems to be integrated with conventional anaerobic digestion (AD) and reverse osmosis (RO). This review offers several recommendations to promote up-scaling studies guided by the pilot scale BES and existing water reclamation technologies.
Bio-coatings serve as artificial scaffolds for immobilizing microalgae to facilitate cell concentration and harvesting. It has been used as an additional step to enhance the natural microalgal biofilm cultivation and to promote new opportunities in artificially-immobilize cultivation technology of microalgae. This technique is able to enhance biomass productivities, enable energy and cost saving, water volume reduction and ease of biomass harvesting since the cells are physically isolated from the liquid medium. However, scientific discoveries of bio-coatings for process intensification are still lacking and their working principles remained unclear. Therefore, this critical review aims to shed light on the advancement of cell encapsulation systems (hydrogel coating, artificial leaf, bio-catalytic latex coating, and cellular polymeric coating) over the years and aid in the selection of appropriate bio-coating techniques for various applications. Discussion on the different preparation routes of bio-coatings, as well as the exploration towards the potential of bio-based coating materials such as natural/synthetic polymers, latex binders, and algal organic matters are also included, with a focus on sustainable pursuits. This review also presents in-depth investigations into the environmental applications of bio-coatings in wastewater remediation, air purification, carbon bio-fixation, and bio-electricity. The field of bio-coating in microalgae immobilization gives rise to a new ecofriendly strategy with scalable cultivation footprint and a balanced environmental risk aligning with the United Nation's Sustainable Development Goals with potential towards the contribution of Zero Hunger, Clean Water and Sanitation, Affordable and Clean Energy, and Responsible Consumption and Production.
Research on renewable energy from microalgae has led to a growing interest in porous substrate photobioreactors, but their widespread adoption is currently limited to pure microalgal biofilm cultures. The behavior of microalgal-bacterial biofilms immobilized on microporous substrates remains as a research challenge, particularly in uncovering their mutualistic interactions in environment enriched with dissolved organic matter. Therefore, this study established a novel culture platform by introducing microalgal-derived bio-coating that preconditioned hydrophilic polyvinylidene fluoride membranes for the microalgal-bacterial biofilm growth of freshwater microalgae, Chlorella vulgaris ESP 31 and marine microalgae, Cylindrotheca fusiformis with bacteria, Escherichia coli. In the attached co-culture mode, the bio-coating we proposed demonstrated the ability to enhance microalgal growth for both studied species by a range of 2.5 % to 19 % starting from day 10 onwards. Additionally, when compared to co-culture on uncoated membranes, the bio-coating exhibited a significant bacterial growth promotion effect, increasing bacterial growth by at least 2.35 times for the C. vulgaris-E. coli co-culture after an initial adaptation phase. A significant increase of at least 72 % in intracellular biochemical compounds (including chlorophyll, polysaccharides, proteins, and lipids) was observed within just five days, primarily due to the high concentration of pre-coated organic matter, mainly sourced from the internal organic matter (IOM) of C. fusiformis. Higher accumulation of organic compounds in the bio-coating indirectly triggers a competition between microalgae and bacteria which potentially stimulate the production of additional intra-/extra-organic substances as a defensive response. In short, insight gained from this study may represent a paradigm shift in the ways that symbiotic interactions are promoted to increase the yield of specific bio-compounds with the presence of bio-coating.
Batik is well known as one of the unique identifiers of the Southeast Asian region. Several countries that still preserve the batik heritage are Malaysia, Indonesia, China and India. The Batik industry holds a significant place in Malaysia's craft-based industry. In Malaysia, batik motifs and patterns are mostly hand-drawn and painted directly on fabric, therefore, each one is unique. The players in the Batik industry are mostly small businesses and cottage industries, particularly in the states of Kelantan, Terengganu, Pahang, Sabah and Sarawak. However, their market growth and contribution are not synchronized with the treatment system. The wastewater generated by this industry rarely meets standard effluent requirements and regulations, thus worrying the authorities. Batik wastewater is categorized as one of the highly polluted wastewaters. The toxicity of pollutants from batik may reduce environmental quality and pose a risk to human health. Batik wastewater needs extensive treatment, since no complete and appropriate treatment has been applied for so many years in specific batik industries. This paper reviews the batik industry in Malaysia, its wastewater generation and the available current treatment practices. It discusses integrated treatments of coagulation-flocculation and phytoremediation technology as a batik wastewater treatment process with potential utility in the batik industry. This review may become part of the guidance for the entire batik industry, especially in Malaysia.
The Environmental Protection Agencies (EPAs) of Denmark, Sweden, Norway, Germany and the Netherlands submitted a proposal to the European Chemical Agency (ECHA) in February 2023 calling for a ban in the use of toxic industrial chemicals per- and polyfluoroalkyl substances (PFAS). These chemicals are highly toxic causing elevated cholesterol, immune suppression, reproductive failure, cancer and neuro-endocrine disruption in humans and wildlife being a significant threat to biodiversity and human health. The main reason for the submitted proposal is recent findings of significant flaws in the transition to PFAS replacements that is leading to a widespread pollution. Denmark was the first country banning PFAS, and now other EU countries support the restrictions of these carcinogenic, endocrine disruptive and immunotoxic chemicals. The proposed plan is among the most extensive received by the ECHA for 50 years. Denmark is now the first EU country to initiate the establishment of groundwater parks to try and protect its drinking water. These parks are areas free of agricultural activities and nutritious sewage sludge to secure drinking water free of xenobiotic including PFAS. The PFAS pollution also reflects the lack of comprehensive spatial and temporal environmental monitoring programs in the EU. Such monitoring programs should include key indicator species across ecosystems of livestock, fish and wildlife, to facilitate detection of early ecological warning signals and sustain public health. Simultaneously with inferring a total PFAS ban, the EU should also push for more persistent, bioaccumulative and toxic (PBT) PFAS substances to be listed on the Stockholm Convention (SC) Annex A such as PFOS (perfluorooctane sulfonic acid) that is currently listed on the SCs Annex B. The combination of these regulative restrictions combined with groundwater parks and pan-European biomonitoring programs, would pave the way forward for a cleaner environment to sustain health across the EU.
A study on the kinetics of accumulation and depuration of Zn, Cu, Pb and Cd by the oysters (Crassostrea iredalei and Crassostrea belcheri) cultured at two locations in the Merbok Estuary, Malaysia was conducted. A first-order kinetic model was employed to fit the experimental data in order to estimate the rate constants for uptake and elimination processes and to predict the bioconcentration factors (BCF). Among the four metals studied, only the Zn accumulation process could not be modelled using first-order kinetics. The elimination rate constants estimated from depuration data for C. iredalei are found to be much greater than those from accumulation data. The results suggest that the values of kinetic parameters and BCFs derived under conditions of both aqueous and dietary exposure are probably more site- than species-specific.
Populations at the edge of their species' distribution ranges are typically living at the physiological extreme of the environmental conditions they can tolerate. As a species' response to global change is likely to be largely determined by its physiological performance, subsequent changes in environmental conditions can profoundly influence populations at range edges, resulting in range extensions or retractions. To understand the differential physiological performance among populations at their distribution range edge and center, we measured levels of mRNA for heat shock protein 70 (hsp70) as an indicator of temperature sensitivity in two high-shore littorinid snails, Echinolittorina malaccana and E. radiata, between 1°N to 36°N along the NW Pacific coast. These Echinolittorina snails are extremely heat-tolerant and frequently experience environmental temperatures in excess of 55 °C when emersed. It was assumed that animals exhibiting high temperature sensitivity will synthesize higher levels of mRNA, which will thus lead to higher energetic costs for thermal defense. Populations showed significant geographic variation in temperature sensitivity along their range. Snails at the northern range edge of E. malaccana and southern range edge of E. radiata exhibited higher levels of hsp70 expression than individuals collected from populations at the center of their respective ranges. The high levels of hsp70 mRNA in populations at the edge of a species' distribution range may serve as an adaptive response to locally stressful thermal environments, suggesting populations at the edge of their distribution range are potentially more sensitive to future global warming.
Since 5-sulfosalicylic acid (SFA) has been increasingly released to the environment, SO4--based oxidation processes using Oxone have been considered as useful methods to eliminate SFA. As Co3O4 has been a promising material for OX activation, the four 3D Co3O4 catalysts with distinct morphologies, including Co3O4-C (with cubes), Co3O4-P (with plates), Co3O4-N (with needles) and Co3O4-F (with floral structures), are fabricated for activating OX to degrade SFA. In particular, Co3O4-F not only exhibits the highest surface area but also possesses the abundant Co2+ and more reactive surface, making Co3O4-F the most advantageous 3D Co3O4 catalyst for OX activation to degrade SFA. The mechanism of SFA by this 3D Co3O4/OX is also investigated and the corresponding SFA degradation pathway has been elucidated. The catalytic activities of Co3O4 catalysts can be correlated to physical and chemical properties which were associated with particular morphologies to provide insights into design of 3D Co3O4-based catalysts for OX-based technology to degrade emerging contaminants, such as SFA.
Understanding the drivers of community structure is fundamental for adequately managing ecosystems under global change. Here we used a large dataset of eighty-four headwater stream sites in three catchments in the Eastern Highlands of Zimbabwe, which represent a variety of abiotic conditions and levels of impairment, to examine the drivers of benthic macroinvertebrate community structure. We focused our assessment on macroinvertebrate family level community composition and functional feeding group classifications. Taxonomic richness was weakly positively correlated with ammonium, phosphates and pH, and weakly negatively correlated with detrital cover and dissolved oxygen. Measured abiotic variables, however, had limited influence on both macroinvertebrate diversity and functional feeding group structure, with the exception of ammonium, channel width and phosphates. This reflected the fact that many macroinvertebrate families and functional feeding guilds were well represented across a broad range of habitats. Predatory macroinvertebrates were relatively abundant, with collector-filterers having the lowest relative abundances. The findings of the study suggest that for certain ecological questions, a more detailed taxonomic resolution may be required to adequately understand the ecology of aquatic macroinvertebrates within river systems. We further recommend management and conservation initiatives on the Save River system, which showed significant impact from catchment developmental pressures, such as urbanisation, agriculture and illegal mining.
Nickel hyperaccumulator plants play a major role in nickel recycling in ultramafic ecosystems, and under agromining the nickel dynamics in the farming system will be affected by removal of nickel-rich biomass. We investigated the biogeochemical cycling of nickel as well as key nutrients in an agromining operation that uses the metal crop Phyllanthus rufuschaneyi in the first tropical metal farm located in Borneo (Sabah, Malaysia). For two years, this study monitored nine 25-m2 plots and collected information on weather, biomass exportation, water, and litter fluxes to the soil. Without harvesting, nickel inputs and outputs had only minor contributions (<1 %) to the total nickel budget in this system. The nickel cycle was mainly driven by internal fluxes, particularly plant uptake, litterfall and throughfall. After two years of cropping, the nickel litter flux corresponded to 50 % of the total nickel stock in the aerial biomass (3.1 g m-2 year-1). Nickel was slowly released from the litter; after 15 months of degradation, 60 % of the initial biomass and the initial nickel quantities were still present in the organic layer. Calcium, phosphorus and potassium budgets in the system were negative without fertilisation. Unlike what is observed for nickel, sustained agromining would thus lead to a strong depletion of calcium stocks if mineral weathering cannot replenish it.
Today, the limited sources of freshwater supply are a significant concern. Exploiting alternative sources, especially seawater, has been the focus, but purifying it is energy-intensive. Integrating desalination with renewable energy is a proposed solution, but it comes with high costs and environmental risks during construction. Hence, this study presents a framework to enhance the modeling, optimization, and evaluation of green water-power cogeneration systems to achieve the sustainability goals of cities and societies. An improved division algorithm (DA) determines the optimal component sizes based on criteria like minimal energy demand, reduced environmental and resource damage, low total life cycle cost (TLCC), and high reliability. Optimization considers varying loss of power supply probability (LPSP) levels (0 %, 2 %, 5 %, and 10 %). The environmental assessment utilizes a life cycle assessment (LCA) approach with IMPACT 2002+ and cumulative energy demand (CED) calculations. The study models the green cogeneration systems based on weather conditions, water demand, and power requirements of Al Lulu Island, Abu Dhabi, UAE. The system comprises photovoltaic panels, wind turbines, tidal generators, and backup systems (fuel cells). Results reveal that TLCC ranges from $186,263 to $486,876 for the highest LPSP. The solar-tidal-based configuration offers the lowest TLCC ($186,263) while substituting solar with wind energy increases TLCC by 160 %. The wind-tidal-based configuration has the lowest specific environmental impact (1020 mPt/yr) and cumulative energy demand (39.06 GJ/yr) for the highest LPSP. In contrast, the solar-tidal-wind-based configuration inflicts the most damage, with 62.63 GJ/yr and 1794 mPt/yr for the highest LPSP. The finding indicates that the DA is faster (100 iterations) than the genetic algorithm (1000 iterations), particle swarm optimization (400 iterations), and artificial bee swarm optimization (300 iterations). The study underscores the solar-tidal-based configuration as the optimal choice across multiple criteria, offering a promising solution for freshwater supply and environmental sustainability on Al Lulu Island.