The aim of this study was to determine the specific content and type of sugars in selected commercial and traditional kuih in Klang Valley. The selection of the kuih was based on the validated Food Frequency Questionnaire (FFQ) for sugar. The selected commercial kuih was doughnut coated with sugar (Big Apple) while the ten traditional kuih samples consisted of kuih bingka ubi, kuih kasui, kuih keria, kuih koci, kuih lapis, kuih lopes, kuih onde-onde, kuih sagu, kuih seri muka and kuih talam. The doughnut coated with sugar (Big Apple) was purchased from Big Apple Donuts and Coffee franchise at two different locations, while the traditional kuih were randomly bought from stalls, cafeterias and restaurants around Kuala Lumpur and Rawang. The types and amount of sugar were determined using High Performance High Chromatography (HPLC) with a refractive index (RI) detector. Results showed that doughnut coated with sugar (Big Apple) has the highest starch content (22.6±0.3 g/100g) and kuih keria contained the highest available carbohydrate (41.5±1.7 g/100g), comprising of 24.2±2.4 g/100g total sugar and 17.3±0.7 g/100g of starch. The least available carbohydrate content was found in kuih talam (20.0±0.5 g/100g), which was 50% lower than the one in kuih keria. Major individual sugars detected in all kuih samples were consisted of sucrose (60.0%), glucose (16.2%), fructose (14.0%), maltose (9.5%) and lactose (0.3%). Majority of the kuih samples (90.9%) in this study can be categorized as medium sugar while only kuih keria was categorized as high sugar. Based on the two main ingredients (sugar and flour) used in the preparation of kuih, results showed that all kuih samples can be categorized as medium sugarmedium starch. In conclusion, this study served as a guideline by locals in selecting kuih of
different sugar levels.
In this study, physicochemical and sensory qualities of substituting jering seed flour into wheat chapatis (unleavened Indian flat bread) were evaluated at different proportions (5, 10, 15, 20 and 100% of jering seed flour). Chapati prepared with 100% of wheat flour was served as control. Results showed wheat-jering composite chapatis had significantly higher protein (12.68-15.55%), ash (1.78-2.32%) and carbohydrate contents (50.78-54.50%) than that of wheat chapatis which served as control (11.49, 1.77% and 51.62%, respectively). As for the fat content, this ranged from 1.19% to 1.03%, corresponding to the levels of jering seed flour substitution. In terms of physical characteristics, the puffed height and extensibility of the composite chapatis decreased progressively as the level of jering seed flour substitution increased. On the other hand, the peak load required to rupture chapatis showed an inverse trend. It increased significantly from 3.26 to 15.96 N. Further, the colour values of composite chapatis showed significant changes when the level of jering seed flour substitution was increased. The L* and b* values decreased while a* value increased. Regarding sensory properties, control wheat chapatis had better acceptability than the composite chapatis. However, all the composite chapatis had significantly higher nutritional values. Based on the generated results, novel chapatis could be formulated by substituting wheat with jering seed flour.
Evaluation on the physicochemical and sensory properties of wheat flour doughnuts substituted with banana flour (BF) was investigated. Wheat flour was substituted with green banana (Musa paradisiaca var. Awak) flour at 0% (control), 10%, 20% and 30% levels in yeast-raised doughnut prepared by the straight dough method. Chemical (moisture, fat, protein, ash, carbohydrate, crude fibre, total dietary fibre and caloric content), physical (volume, specific volume and colour) and sensory evaluation were conducted on all samples. Chemical analyses result indicated a higher percentage of total dietary fibre and caloric content in doughnut substituted with BF than the control. Colour evaluation showed that the dough, crust and crumb of doughnut with BF ranged from 68.97 ± 0.59 – 84.78 ± 0.16 (red – yellow quadrant). The change from light to darker colour correlated with the amount of BF added. Results also showed that the volume and specific volume was significantly affected (p < 0.05) by levels of BF substituted. Doughnut substituted with 20% BF showed the highest score in overall acceptability (6.71 ± 1.40).
The objective of this study was to examine the effect of different ratios of fish to tapioca flour on the linear expansion, oil absorption, colour, and crispiness of fish crackers. Four different ratios of fish to tapioca flour were used in the formulation of the fish crackers. The results showed that protein and fat content increased with the increase in the ratio of the fish. On the other hand, linear expansion and oil absorption decreased with an increase in the ratio of the fish. Hardness also increased with the increase in the ratio of the fish. The colour measurement showed that the lightness value decreased with an increase in the ratio of fish and this decrease is seen more clearly with the fried fish crackers.
Physical properties of ripe banana flour were studied in Cavendish and Dream banana, in order to distinguish the two varieties. Flour was analyzed for pH, total soluble solids (TSS), water holding capacity
(WHC) and oil holding capacity (OHC) at 40, 60 and 80 °C, color values L*, a* and b*, back extrusion force
and viscosity. Physical properties data were analyzed by cluster analysis (CA) and discriminant analysis (DA). CA showed that the two types of flour were different in terms of selected physical properties. DA indicated that WHC at 60 °C was the main contributor in discriminating the two types of flour.
The influence of variety (Cavendish and Dream), stage of ripeness (green and ripe) and parts (pulp and peel) on antioxidative compounds and antioxidant activity of banana fruit was investigated. The TPC and TFC ranged widely from 75.01 to 685.57 mg GAE/100 g and 39.01 to 389.33 mg CEQ/100 g of dry matter respectively. Cavendish banana flour contained higher TPC and TFC compared to Dream variety. TPC and TFC values of banana peel were higher than those of banana pulp. Also, green banana showed higher TPC and TFC values than those of ripe fruit. Radical scavenging activities (inhibition of DPPH) of the extracts ranged from 26.55 to 52.66%. Although Dream banana peel extracts appeared to have low TPC and TFC, its antioxidant activities were ranked moderate to high. This implies that antioxidative compounds other than phenolics and flavonoids were probably responsible for inhibition of DPPH.
Kenaf (Hibiscus cannabinus) seeds have always being wasted as agricultural waste. Recent studies revealed that the seeds contain high fiber. The purpose of this study is to develop defatted kenaf seeds yellow noodles (DKSY) and assess the nutritional and physicohemical properties of the noodles. Defatted kenaf flour at 25% and 75% were used to make DKSY noodles and compared to wheat yellow noodles (Control). Fresh DKSY noodles were analyzed for their nutritional and physiochemical properties. The ash and fiber contents increased in order of Control > 25% DKSY > 75% DKSY noodles. While total phenolic contents (TPC) was found to be higher in 75% DKSY noodles (138.30 ± 1.63 mg GAE/100 g) than Control noodles. Colour (L, b) and hardness decreased in order of Control > 25% DKSY > 75% DKSY indicating that DKSY noodles developed less quality than Control noodles. However, cooking loss values were found to be in the same order while cooking values exist in the opposite order indicating that. DKSY noodles have better noodle cooking quality. In conclusion, nutritional properties and noodle cooking quality of yellow noodles increased with higher concentration of defatted kenaf flour but the physicochemical properties were compromised. More research needs to be done in order to develop a formulation that can increase all of the attributes studied.
Proximate composition, pH and amylose content of ripe Cavendish banana flour (RBF) prepared in this study were compared with all-purpose wheat flour (WF). RBF was found to be significantly (P < 0.05) higher in total carbohydrates and minerals content, while significantly (P < 0.05) lower in protein and fat contents compared with those of WF. Wheat-ripe banana composite flours (W-RBF) prepared by partial substitution of WF with RBF were assessed for swelling power, solubility, pasting properties and gel textural properties. Granular swelling of RBF occurred at a higher temperature compared to that of WF, suggesting that more energy and water were required to cook WF-RBF as the presence of soluble carbohydrates would compete for water and this would eventually delay starch hydration and granular expansion during cooking. Higher substitution with RBF led to higher soluble carbohydrates content, and increase in solubility index of WF-RBF. Partial substitution with RBF also resulted in significant (P < 0.05) decrease in pasting properties. A higher substitution of WF with RBF could reduce starch gelatinisation during cooking and retrogradation owing to the reduction of available starch in WF-RBF. All WF-RBF gels were significantly (P < 0.05) firmer and less sticky compared to WF gels.
Cavendish (Musa paradisiaca L, cv cavendshii) and Dream (Musa acuminata colla. AAA, cv ‘Berangan’) banana flours were prepared from ripe fruits collected from eleven markets located in Penang, Malaysia. The mineral composition (Na, K, Ca, Mg, Cu, Fe, Mn, Zn) of the flour were analyzed by atomic absorption spectrophotometer and the data obtained were analyzed using logistic regression model. Ripe banana flours were rich source of K and a fair source of other minerals, however logistic regression model identified Mg as an indicator to discriminate between the two types of banana flour affording 100 % correct assignation. Based on this result, mineral analysis may be suggested as a method to authenticate ripe banana flour. This study also presents the usefulness of logistic regression technique for analysis and interpretation of complex data.
The objective of this research is to develop an “energy” snack bar supplying energy and
electrolytes in one bar by utilizing local Malaysian ingredients. The local ingredients used to make
this snack bar were banana, glutinous rice flour, and coconut milk. It is a wholesome nutritious
food for different age groups from adolescents to elderly people. Proximate composition, total
carbohydrate, energy value, and sensory quality of prototype were determined. The developed
snack bar contains 13.23% of moisture, 1.13% of ash, 6.36% of crude protein, 22.39% of
crude fat, 1.16% of crude fibre, 56.89% of total carbohydrate, and 454.51 kcal of energy. The
“energy” snack bar was highly acceptable with desirable sensory quality by all consumers.
The physical attributes (pH and colour), cooking yield, textural and mechanical properties (firmness, tensile and texture profiles analyses) and structural breakdown properties (multiple extrusion cell with added artificial saliva) of five yellow alkaline noodle (YAN) formulations were studied. Samples used were noodles with (a) typical formulation (control), (b) soy protein isolate (SPI), (c) soy protein isolate plus microbial transglutaminase enzyme (SPI/MTGase), (d) green banana pulp flour (GBPu) and (e) green banana peel flour (GBPe). Compared to other noodles SPI/MTGase noodle showed significantly (P < 0.05) higher values in terms of textural, mechanical and breakdown properties. Incorporating SPI, banana pulp and peel flours into the noodles had imposed some differences on most of the mechanical and textural parameters from the control YAN. However, these noodles could not be clearly distinguished in term of structural breakdown properties.
This study examined the physicochemical properties of rice flours with five different particle sizes (≤63, 80, 100, 125, and 140 μm) prepared by dry milling and their effects on textural properties of laksa noodles. Rice flour with the smallest particle size had the highest water absorption index, peak viscosity, hot paste viscosity, breakdown, final or cold paste viscosity and gel hardness, but the lowest gelatinization temperature. Reduction of rice flour particle size improved textural properties of laksa noodle. Laksa noodle produced from rice flour with the smallest particle size had the best textural properties.
Proximate compositions, culinary and sensory properties of noodles prepared from proportionate combinations of breadfruit starch and wheat flour were investigated. Breadfruit starch (BS) isolated from matured breadfruit (Artocarpus altilis) was used to produce noodles in combination with hard red wheat flour (WF) at a ratio of 100% WF:0% BS, 80% WF:20% BS, 60% WF:40% BS, 40% WF:60% BS, 20% WF:80% BS. The protein, fat, ash, crude fibre and moisture contents of the Breadfruit starch-Wheat flour (BSWF) noodles prepared from the above blends ranged from 0.65 to 10.88%, 0.35 to 3.15%, 1.28 to 2.25%, 1.18 to 1.45% and 4.65 to 5.45%, respectively. The contents of protein, fat, ash and crude fibre increased as the percentage breadfruit starch decreased. However, values of moisture content did not follow the same trend, instead higher values were found for 100% BS:0% WF (5.35%) and 20% BS:80% WF (5.45%). The cooking yield of the BSWF noodles ranged from 21.02 (60% BS:40% WF) to 23.75 g (100% BS:0% WF), cooking loss ranged from 5.49 (20% BS:80% WF) to 9.19% (100% BS:0% WF), while swelling index ranged from 3.1 (20% BS:80% WF) to 3.4 (100% BS:0% WF). Throughout the study, noodles produced from blends of 20% breadfruit starch and 80% wheat flour showed superior proximate, culinary and sensory attributes.
Discovery of novel dietary fibre (DF)-rich food ingredient is of great interest to meet the rising consumer demand for healthy food. Intake of DF-enriched food has been positively associated with a decreased risk of chronic diseases. Pleurotus sajor-caju (PSC), one of the prominent edible mushrooms widely cultivated in Malaysia, is useful for its culinary and medicinal purpose. This study aimed to determine the nutritional, physical, colour and sensorial properties of cinnamon biscuit formulated with PSC powder as partial replacement (0, 4, 8 and 12%) for wheat flour. Results indicated that elevated incorporation levels of PSC powder significantly (P
There is an increasing demand for fibre rich food and food ingredients. In this study, pumpkin pulp, unripe banana pulp, unripe mango pulp and peel which are high in dietary fibre were processed into flour and substituted at 5% level for wheat flour in a composite flour crackers formulation. The control crackers comprised of 100% wheat flour. Sensory evaluation was conducted using a 9-point hedonic scale with 31 panelists evaluating the crackers based on colour, crrispiness, taste and overall acceptance. Different types of composite flour crackers were not significantly different (p≤0.05) in term of crispiness. For colour, taste and overall acceptance, the pumpkin, banana and control crackers differ significantly (p≤0.05) with the mango pulp and mango peel crackers.
Biscuit is a popular food product where it is produced using wheat flour, sugar and fat as its main ingredients. Wheat flour is the major material used in biscuit production and within the flour starch is the principal component. The details of starch properties such as pasting properties, gelatinisation properties, crystallinity were discussed in this review. Starch is the major structural element in many foods, with the fat or sugar also playing key roles. Sugar gives sweetness, colour, add volumes and influence the texture of a biscuit. Besides that, it shows significant impact on starch gelatinization properties. Fat plays an important role in biscuit production and the type of fat used determines the quality of the final product. In this article, the functional properties of major ingredients of biscuit were also reviewed with emphasis on wheat flour, sugar and fat.
Mung bean is considered a ‘green pearl’ for its relatively high protein content; however, it has limited application as a raw material for industrial food products. As the potential use of mung beans relies on its protein behavior, this study characterized the functional properties of mung bean protein isolates and the results were compared with soy protein isolates. The protein isolates were prepared from mung bean and soy bean flours via extraction with 1 N NaOH, precipitated at pH 4, and subsequently freeze-dried. The amino acid profile as well as the hydrophilic and hydrophobic ratio of mung bean protein isolate, had been comparable with soy protein isolate. The water and oil absorption capacities as well as the denaturation temperature of mung bean protein isolate, were found to be similar with those of soy bean protein isolate. However, foaming capacity (89.66%) of mung bean protein isolate was higher than that of soy protein isolate (68.66%). Besides, least gelation concentration (LGC) of mung bean protein isolate (12%) was also close to LGC of soy protein isolate (14%), while the protein solubility was comparable between both the isolated proteins. The physical features of the textured mung bean were close to the commercial textured soy protein, which showed a heterogeneous and porous network like matrix when the mung bean flour was extruded to measure its potentiality to produce textured vegetable protein.all seaweed extracts. Results showed that extraction parameters had significant effect (p < 0.05) on the antioxidant compounds and antioxidant capacities of seaweed. Sargassum polycystum portrayed the most antioxidant compounds (37.41 ± 0.01 mg GAE/g DW and 4.54 ± 0.02 mg CE/g DW) and capacities (2.00 ± 0.01 μmol TEAC/g DW and 0.84 ± 0.01 μmol TEAC/g DW) amongst four species of seaweed.
Currently, data concerning the content of naturally occurring dietary folate in Malaysian foods is scarce. The aim of this study was to determine the folate content of vegetables, fruits, legumes and cereals that were commonly consumed among Malaysians. The total folate content of 156 samples (51 vegetables, 33 fruits, 22 legumes and legume products, and 50 cereals and cereal products) available in Malaysia was determined by microbiological assay using Lactobacillus casei (L. casei) after trienzyme treatment with protease, α-amylase and folate conjugase (from rat serum). An internal quality control system was used throughout the study by analyzing CRM 121 (wholemeal flour) and CRM 485 (lyophilized mixed vegetables); percent recovery (as mean ± SD) of 97 ± 2.0 and 101 ± 4.0 was obtained. The range of folate content in vegetables, fruits, legumes and cereals were 1-11 μg/100 g and 1-31on the basis of fresh weight and 1-31 µg/100 g and 2-156 µg/100 g on the basis of dry weight, respectively. This study has shown that some of these underutilized vegetables and fruits are good sources of folate and could fulfill the recommended dietary intake of total folate.
Dough mixing and thermal properties including the pasting profiles of various commercial wheat flour (WF)-banana pseudostem flour (BP)-hydrocolloid blends were determined using a farinograph, differential scanning calorimetry (DSC) and a rapid-visco analyser (RVA). The prepared blends were WF, WF substituted with 10% BP (10BP) and 10BP with added 0.8% w/w (flour weight basis) xanthan gum (XG) or sodium carboxymethylcellulose (CMC) (10BPX and 10BPC, respectively). The dough of 10BP and the doughs containing XG or CMC reduced stability and breakdown time compared with the WF dough. All dough containing BP demonstrated greater water absorption and mixing tolerance index values than the WF dough. The substitution of 10% BP into WF and the addition of hydrocolloids did not significantly affect the conclusion temperature (Tc) of the mixture, but did increased the onset temperature (To), peak temperature (Tp) and decreased the gelatinisation enthalpy change (ΔHg) of the blends. Samples of 10BP, 10BPX and 10BPC significantly decreased (p
The aim of this study was to evaluate the effect of barrel temperature and flour types on the residence time and physical properties of various flour extrudates. Corn flour, rice flour, corn flour with potato starch (30% w/w, d.b), and rice flour with potato starch (30%w/w, d.b) were extruded at screw speed of 75rpm, feed moisture at 25% (w/w, w.b.), barrel temperature ranging from 80°C to 140°C and die size of 1.88mm. The extrudates were dried at 50°C overnight and further analysed. Results showed that an increase in extruder barrel temperature decreased the residence time of the flours in the extruder (from 4.11-11.32min to 2.24-6.76min), but increased the expansion ratio, rehydration ratio, water absorption index, water solubility index and b value of the extrudate (p≤0.05). The extrudates had the mean residence time and physical properties of rice flour