Human activity has ‘very likely’ been the primary cause of global warming since the start of the Industrial Revolution (18th–19th century). As a new player in industrial transformation, Malaysia can choose to ignore the warnings of global warming. blame. This may not augur well. Release of greenhouse gases have been categorically linked to climate change and global warming. In her march towards industrialization, Malaysia too has contributed to the release of greenhouse gases. Apart from those arising from natural sources, the industrial sector in Malaysia also releases other types of gases such as the fluorocarbons. This is evident from the worsening air quality in some of our cities. (Copied from article).
In December 2009, at the UN Climate Change Conference COP 15 in Copenhagen, the Prime Minister of Malaysia, the Rt. Hon. Mohd Najib Abdul Razak, had announced that “Malaysia is adopting an indicator of a voluntary reduction of up to 40% in terms of emissions intensity of GDP by the year 2020 compared to 2005 levels. This indicator is conditional on receiving the transfer of technology and finance of adequate and effective levels from Annex 1 partners, that correspond to what is required in order to achieve this indicator”. Malaysia also needs to decouple its GDP from its current relatively high carbon-based energy demand. In trying to meet both these targets, we need to intensify our research efforts in energy-based areas. As government funding in R&D is limited as the aim is for research to be private-sector driven, and with the grim global economic scenario today, it is most unlikely that Malaysia will get any assistance financially or technologically from Annex 1 nations. It is therefore proposed that Malaysia considers implementing a dedicated carbon cess on petroleum products to fund R&D in the country. (Copied from article).
The government’s science and technology (S&T) apparatus is now in active consultation to formulate the third national S&T policy (NSTP3) and I have been involved in some of these meetings and have benefitted from them. In an earlier article (New Straits Times, 9 July 2011, p. 18) I had briefly described the two previous policies and given some thought on what the essentials of the NSTP3 should be. I am now offering some further thoughts on the subject. (Copied from article).
Awareness and sensitivity on the subject of green technology are currently commanding the attention of the world in the light of rising energy costs and the threat of global warming. Many countries are now recognizing the benefits of researching into and using green technology to reduce their carbon and water footprints and to minimize waste. (Copied from article).
A study to determine the impact of leachate from operating and closed landfills into the surface water and groundwater systems in the state of Selangor was conducted in the year 2009. Groundwater was a major source of water for various uses in Selangor, Malaysia and was especially important for industrial purposes. The presence of high numbers of landfill sites was seen to have increased the risk of groundwater contamination. There were 20 landfill sites in the state of Selangor and seven of them were still operating and 13 closed. The landfills are classified into four categories, which were: (a) landfills operating at critical stages without controls to prevent pollution into the environment; (b) open dumpsites that have the capacity to continue to accept waste but needed to be upgraded to manage leachate and gas; (c) landfills that were closed but no safety closure plan was carried out; and (d) engineered landfills with up to date technologies. As most of the landfills were built prior to 1989, they were not subjected to the Environmental Impact Assessment requirements, hence, they were being poorly managed and were badly sited. The non-engineered sites had no proper pollution controls such as cover materials, liner materials, groundwater monitoring wells, leachate collection ponds and treatment, and methane gas collection pipes. This study revealed that the surface water and groundwater at and nearby the landfill sites were contaminated at various levels due to the landfill sites and operation. A comparison between the current quality of surface water and groundwater with their respective standards and background levels was carried out to survey the trend of the contamination. However, the limited financial resources hindered a very thorough investigation and restricted the number of samples collected and parameters analysed.
Lead-free solder paste printing processes account for the majority of assembly defects in the electronic manufacturing industry. In the stencil printing process, the solder paste must be able to withstand low and high shear rates which result in continuous structural breakdown and build-up. This study investigated the effect of the addition of nickel and platinum powders to the thixotropic behaviour of lead-free Sn/Ag/Cu solder pastes using the structural kinetic model. A hysteresis loop test and constant shear test were utilized to investigate the thixotropic behaviour of the pastes using parallel plate rheometry at 25ºC. In this study, the shear rates were increased from 0.01 s–1 to 10 s–1 and the second curve was a result of decreasing the shear rate from 10 s–1 to 0.01 s–1. For the constant shear test, the samples were subjected to five different shear rates of 0.01s–1, 0.1s–1, 1s–1, 10s–1 and 100s–1. The constant shear rate test was designed to study the structural breakdown and build-up of the paste materials. From this investigation, the hysteresis loop test was shown to be an effective test method to differentiate the extent of structural recovery in the solder pastes. All the pastes showed a high degree of shear thinning behaviour with time. This might be due to the agglomeration of particles in the flux that prohibited paste flow under low shear rate. The action of high shear rate would break the agglomerates into smaller pieces which facilitated the flow of pastes, thus viscosity was reduced at high shear rate.
The effects of anticipated climate change and the potential impact on animal production are discussed in the context of varying biophysical features, agro-ecological zones (AEZs), ecosystems, land use, and responses in animal genetic diversity and production. The AEZs in Asia have great diversity in their links to food production in crop-animal small farm systems, the poverty complex and livelihoods of the poor. In these environments. climate change effects on animals were mediated through heat stress, water availability, quantity and quality of the available feed resources, type of production system and productivity. The responses to heat stress are tabulated and they vary according to species, breeds within-species, AEZs, physiological and nutritional status, genetic potential and multifunctionality. Among ruminant production systems, dairy production was especially vulnerable to heat stress. Interestingly in India, buffalo numbers owned largely by the landless and small farmers in the semi-arid and arid regions have grown twice as fast as the buffalo population in the irrigated areas. The implications and strategies to cope with climate change involve mitigation, adaptation and policy. The principal strategy is targetting to the reduce on in greenhouse gas (GHG) emission from the agricultural sector from enteric fermentation and manure, and ways to intensify C sequestration. An important link is that of breeding and conserving indigenous animal genetic resources as a means to mitigate climate change, with associated benefits to the trade of live animals and animal products. Improved integrated tree crops-ruminant systems are an important pathway to enhance C sequestration. The opportunities for research and development (R&D) are enormous and they would need policy support and large investments to provide improved understanding of ways to ensure sustainable animal production systems. Coping with the totality of the effects and impact of climate change constitutes the challenges for agricultural R&D and the improved livelihood of the resource-poor in the future.
Malaysia has adopted various strategies in developing its space sector. Indigenous space technologies would enable a sustainable growth of the space field and at the same time develop the strategic space technologies. Therefore, issues related to the current space research level are fundamentally crucial to be highlighted. Subsequently, the space focus areas can be derived in order to meet the expectations of the national and international space technology growth requirements, which are moving on to a stronger posture in R&D. In the absence of a strong R&D national space industry leadership, the Malaysian space sector remains in a traditional downstream mode of the world space technology supply chain ever since. The space technology supply chain can be divided into the ground segment and the space segment. This paper examines the current space research activities in Malaysia within the framework of the space technology supply chain. As a result, a preliminary gap in the overview of space research in Malaysia is established.
Reflex epilepsy is usually induced by external stimulation, photosensitive epilepsy being the most common. Epilepsy induced by auditory stimulation is rarely studied. There are no currently published magnetoencephalographic (MEG) studies demonstrating the initiation of epileptic neuronal discharges by repeated auditory stimulations in temporal lobe epilepsy (TLE) patients. We retrospectively studied one TLE patient who underwent a MEG study to localize her epileptic focus. Auditory, somatosensory, visual and motor evoked potential studies were performed during the MEG recording. A single dipole method calculated equivalent current dipoles to localize the epileptic source. The least-squares minimization method was used to obtain the optimal solution with goodness-of-fit of greater than 80%. Periodic lateralized epileptiform discharges (PLEDs) were recorded in the temporal region when repeated auditory stimulations were done. We postulated that neuronal cortical suppression occurred during repeated stimulations which provoked epileptiform discharges (PLEDs) without any physical symptoms or aura. It was concluded that repeated stimulations could facilitate epileptiform discharges in focal area/areas in certain subjects.
Almost a half century after it was introduced, Wilks’ statistic has come into application in industrial manufacturing process variability monitoring. This is an important breakthrough in the way experts monitor the variability of manufacturing processes which is vital in modern industry. It leaves behind the traditional practice characterized by the use of sample size n which equals 1, if the process variability monitoring is based on individual observations and is greater than the number of variables p if one works with subgroup observations. The use of Wilks’ statistic allows us to work with n < p. This paper contains a review on process variability monitoring based on individual observations. First, some historical backgrounds of process variability monitoring in the general scheme was reviewed before it was revealed where the philosophy of Wilks’ statistic could be further interpreted. Subsequently it was indicated that the way to monitor the process variability depended on how the variability itself was measured. Finally, a new statistic for detecting the shift in variability based on individual observations was introduced and then a new control chart was proposed. The performance of the proposed chart as compared with Wilks chart, was quite promising. Therefore, some recommendations were given to better understand the history of manufacturing process variability.
The functionalization of pristine CNTs is necessary for carbon nanotubes (CNTs) to be fully utilized, with the aim of increasing the nanotube reactivity and solubility in aqueous solutions. In this study, multi-walled carbon nanotubes (MWCNTs) were functionalized with a carboxylic group as this was an important step prior to application. The carboxylic group-functionalization was conducted through acid treatment, using sulphuric and nitric acids mixed at a ratio of 3:1 (v/v) and sonication for 30 min under different temperatures and time durations. The functionalization conditions of 50ºC x 5 h and 60ºC x 3 h were identified to be most suitable for introducing a carboxylic group onto the nanotube surfaces. The percentage of total weight loss due to the carboxylic group on the MWCNTs treated at 50ºC x 5 h and 60ºC x 3 h obtained from the thermogravimetric analysis was 13.26% and 13.76%, respectively. For both samples, peaks corresponding to the carboxylic group were identified in the FT-IR spectra. The changes in the morphology of the treated MWCNTs were also observed under SEM analysis.
Research and development trends will continue to design innovative composite foods in which muscle proteins are combined with non-conventional animal products, non-meat proteins and functional food additives, many of which have lost their original inherent properties and characteristics. Composite food are products with meat, non-meat proteins, fats, carbohydrates and functional ingredients such as pre-emulsion, probiotics, enzymes, bioactives, peptides, hormones, emulsifiers, gelatin, animal fats/oils, alcohol and visceral tissues. Traceability of halal meat raw materials should start at the point of animal breeding, production to the stage of halal slaughter, processing operations and final point of consumption. Traceability of food additives used in the food industry remains a major hurdle for the Muslim community seeking halal food. The processes and technological advancements made in raw material processing, ingredient extractions, modifications, purification and resynthesized into many food ingredients make the question of traceability and solving of the materials and processes that are halal a monumental task. Food is only halal if the entire food chain from farm to table, is processed, handled and stored in accordance with the syariah and/or halal standards or guidelines, such as in the Jabatan Kemajuan Islam Malaysia (JAKIM): General guidelines, Malaysia Standards MS 1500:2009 and Codex Alimentarius (Food Labeling). Here lies the challenge and importance of traceability to verify the ‘wholesomeness’ of the sources of halal raw materials and final meat-based food products.
Over the last century, the earth’s climate has changed. It is a serious global, long-term problem which involves complex interactions. A lot of evidence suggests that most of the observed factors contributing to the crisis over the last 50 years can be attributed to human activities. Malaysia has always been vulnerable to extreme climatic events such as typhoons, floods and drought. We expect climate change to exacerbate these vulnerabilities. To ensure, that our water resources will always be secure and ready for use. We need to create awareness in the public and the policy makers so that they will acknowledge that the climate change issue is real. They also need to accept that actions to adapt with our vulnerabilities should be immediately put in place. We can do this by integrating the various sector policies and securing the participation of all stakeholders in Malaysia and other countries.
A 'green tyre' concept has the advantage of low rolling resistance, improved wet grip and enhanced handling. It has been reported that 3% decrease in rolling resistance is equivalent to 1% fuel saving, thus giving the 'green tyre' economic benefits and customer satisfaction. In this study, epoxidised natural rubber (ENR) compounds containing various loading of silica filler were prepared. The processibility and viscoelastic properties were investigated using the rubber processing analyser and Mooney viscometer. Results showed that the properties were adversely affected by the poor dispersion of silica as supported by the bound rubber measurement. In addition, a reversion in the cure behaviour was also observed as the curing temperature was increased to 170ºC.
The human brain generates different oscillations at different frequencies during various consciousness levels. When these brain waves synchronize with exogenous rhythmic stimulation, the brain experiences strong, yet relaxing emotion that could be involved in the formation of memory. We investigated the character of rhythmic oscillatory dynamics by electroencephalography (EEG) of subjects listening to a short verse of the Holy Quran compared to resting and Arabic news listening. The mean power amplitudes of each frequency band for wavelet-based time-frequency analysis were obtained from 5000 ms of segmented EEG recordings during rest, news and Quran listening conditions. The time series analysis of power from each of three conditions in each frequency band from the grand averaged data was then subjected to autocorrelation study. The results showed significant cyclic overall trends of increasing and decreasing patterns of power in the low frequency brain wave oscillation of different head regions especially global, frontal and temporal sites. These results provided a basis for prediction of the periodicity of the power of the oscillatory brain dynamics of delta and robustly in theta regions which occurred during Quran listening. Despite several limitations, our data offered a plausible scientific basis to the emotional induction during Quran listening that mimics recognized as data from music listening studies. This offered a promising perspective for future studies in translational neurophysiological, cognitive and biofeedback on Quran listening to modify brain behaviour in health and disease.
Hydraulics simulation can be used as a supporting tool for planning and developing a framework, such as Integrated Flood Management for river management. To demonstrate this, a hydraulics model for the Sarawak River Basin was run using InfoWorks RS software by Wallingford Software, UK. InfoWorks River Simulation (RS) was chosen because its applicability has been proven and widely used to model Malaysian rivers. The extraction of computed floodwater level and flood maps for different time intervals would produce the rate of floodplain submergence from river bank level. This information could be incorporated into a logical framework to support decisions on flood management measures. Thus, hydraulics models can be used as tools to provide the necessary decision parameters for developing logical frameworks which would act as to guide the planning when it involved various stakeholders’ participation.
Epilepsy is a neurological disorder characterized by recurrent seizures resulting from excessive abnormal electrical discharges in the brain. Medicinal plants may play an invaluable role to discover the new antiepileptic drugs. The aim of the present study was to investigate the anticonvulsant activity of α-terpineol isolated from Myristica fragrans Hountt. The α-terpineol showed a significant inhibition of the seizure episodes and spikes in absence seizures model of Genetic Absence Epilepsy Rats from Strasbourg (GAERS) rats by using electroencephalography records. It showed dose-dependent anticonvulsant activity that was comparable to the known antiepileptic drug of diazepam. It showed a rapid onset and relatively short duration of anticonvulsant effects. The present findings suggest that α-terpineol might possess antiepileptic activities against the partial seizures of human because it prevented seizures in well-established genetic absence seizure animal model of GAERS rats.
Since its invention, polyimide (PI) has been widely used in micro-electro-mechanical system (MEMS) devices. For fabrication, the PI membrane, PI-2723 HD-Microsystems was used as the membrane material due to its Young's modulus of 2.7 GPa and its film thickness could easily be controlled by changing the speed of the spin coater system. The application PI as membrane structure on silicon wafers therefore gave a much better mechanical performance then conventional membranes made of silicon dioxide (SiO2) or silicon nitride (Si3N4) layers. The fabrication of PI membrane was the same as for SiO2 and Si3N4 membranes; the basic step was to etch a side of the silicon wafer using wet anisotropic etching. This paper proposes an effective process for fabrication of PI membrane with f ast and little supervision. In this process, a dual step process was wet anisotropic etching of single crystal silicon using pottasium hydroxyl (KOH) with different concentrations and temperature processes. For the first process, 45% KOH under boiling temperature was used to etch at least 90%–95% of the silicon. In the second process, the silicon was submerged in 45% KOH with temperature at 70ºC–80ºC to etch away the residual silicon until a clean and transparent PI membrane was achieved. Using this method, the fabrication of PI membrane could be generated fast.
Cassava starch was used as feedstock for production of bioethanol by Saccharomyces cerevisiae. The cassava starch was hydrolyzed using commercial α-amylase and glucoamylase enzymes followed by a batch ethanol fermentation process using saccharified starch slurry. By using 110 g/L of reducing sugar from saccharified starch slurry, the ethanol yield was promising with maximum ethanol concentration of 20.6 g/L recorded after 55 hours of cultivation process. Three different models - the Logistic model, Luedeking-Piret-like equation and Gompertz equation - were used to characterize and explain the cell growth, reducing sugar consumption and production formation, respectively. The kinetic parameters were estimated by fitting the experimental data to the proposed models using non-linear regression analysis. The correlation coefficient r2 values for the Logistic model, Luedeking-Piret-like equation and the Gompertz equation were 0.994, 0.996 and 0.990, respectively. The high correlation coefficient values indicate that the proposed models were able to describe the ethanol fermentation process.
The pursuit, initiation and establishment of multi-stakeholder partnerships, including with the private sector, is often a critical component of attaining and achieving the success and sustainability of many projects the world over. However, the soliciting and securing of socially, economically and environmentally constructive engagements between the private sector on the one hand, and the NGOs, CBOs and local communities on the other hand, is in reality much easier said than done. Notably, since most private sector corporations undoubtedly tend to leave behind various "ecological footprints", differing only in their size and depth, stemming from their respective forms and functions, and their ensuing impacts and implications. The interplay between the civil society and the private sector, especially for resource mobilization. (Copied from article).