The widespread use of aesthetic fillings has highlighted their advantages and disadvantages. One
of the most troublesome features of earlier aesthetic materials was the difficulty of finishing the restoration surface to decrease adherence of food debris. The rougher the finished surface, the greater the possibility of bacterial accumulation and discolouration of restoration along the restoration margin with secondary caries formation. Aside from these clinical implications, patients are highly discerning and could detect roughness of 0.30 μm with their tongue. The aesthetic restoration should mimic the appearance of natural dentition and should have an enamel-like appearance. An increased demand for superior aesthetics from composite resin has increased the
demand for more eff icient and simple polishing techniques. The development of nanocomposites has given a new perspective to the polishing of composite resins. Nanocomposites claim the advantage of improved gloss, optical characteristics and reduced wear. To date, results of in vitro studies have been equivocal regarding the most efficient and effective polishing system. There is variation in the effects of different finishing and polishing instruments on the surface roughness due to great diversity in size, shape, composition and distribution of the filler particles of composite resins, type of resin and a wide variety of finishing and polishing instruments. This paper will
review the different factors that affect polishing techniques used in achieving the desired polish on
composite resin restorations.
Oral recurrent aphthous stomatitis is the most common oral mucosal disease. Despite much clinical and research attention, the causes remain incompletely understood. Treatment options include no treatment, treatment of associated systemic diseases, topical medications, systemic treatment and palliative treatments. The most effective treatments involve agents that suppress or modulate the immune function. Topical agents are preferred due to its limited side-effects. Adjunct pain control and prevention of secondary infections is sometimes necessary.
The ability of a pathologist to accurately interpret a lesion is largely dependent on a good biopsy performed by the surgeon. This article describes the common pittfalls in biopsy techniques and offers ways to minimize them. It also discusses the difficulties encountered by the pathologist in attempting to interpret artefactually damaged tissues.
The aim of this study was to assess the viability of coating collagen to Hydroxyapatite (HA) coated commercially pure Titanium (cpTi) samples. Five samples of cpTi were immersed in a simulated body fluid (Tas-SBF) after stages of gritting, sandblasting and acid etching. One sample was taken out after 3, 5 and 7 days of immersion in Tas-SBF respectively. The 7 days Tas-SBF coated sample was coated with collagen by physical adsorption method. Analysis was performed to study the surface roughness, morphology and elemental analysis of the coated surfaces.The equipment used wereAlicona, Scanning Electron Microscope (SEM), Energy-dispersive X-ray Spectroscopy (EDS) and Fourier Transform Infrared Spectroscopy (FTIR). Process of sand blasting and acid etching were able to produce desired morphology and surface roughness. The average surface roughness, Sa of sand blasted cpTi surface and acid etched cpTi were 2.17 ± 0.75 µm and 2.12 ± 0.15 µm respectively. Immersion in Tas-SBF produced a crystalline coating and morphology that were similar to bone-like apatite. Roughness value of cpTi after being immersed in SBF for 7 days was 2.23 ± 0.31 µm and the Ca/P ratio was 7.076. Collagen coated samples had the highest Sa value which was 3.91 ± 0.31 µm and the Ca/P ratio was 1.190. This study showed that it is possible to achieve apatite and collagen coating on a modified cpTi surface using physical adsorption method.
To date, fluorides has remained to be the best means of controlling dental caries. Fluoride is given either systematically via fluoridated water or topically through other supplements including toothpastes. In recent years increasing prevalence of enamel defects or fluorosis is observed in both populations receiving or not receiving water fluoridation. It is suspected that excessive ingestion of a "standard" 1000 to 1500 ppm fluoride from toothpastes might be a contributing factor to the presence of such defects. In Malaysia, reports of enamel defects occurring amongst 12 to 16 year-old schoolchildren ranged between 67 to 88 percent. Where water fluoridation is available, the amount of fluorides received from the home is between 0.3 to 0.5 ppm F. However, almost all toothpastes sold locally contains fluoride, the content of which is unknown to the consumers. This study reports on the analysis of fluoride levels carried out on 20 toothpaste samples sold locally. Results showed that fluoride levels in all 20 samples ranged between 20 to 1970 ppm F. Only two of the 20 samples analyzed, however, indicated having a level anywhere near the "standard" level. In addition, only two type~ of children's toothpaste with a fluoride concentration of 20 and 450 ppm F were commonly available as compared to adult toothpastes in all the samples studied.
A study was carried out to investigate whether smoking had any effect on the Langerhans cells in the oral mucosa, which might throw light onto the mechanism of malignant transformation of some keratotic lesions in the oral cavity. Thirty-two cases of keratotic lesions from biopsy specimens of smokers and non-smokers were studied. Langerhans cells were identified by immuno cytochemical staining for 5100 proteins and their densities quantified. Smokers were associated with a significant reduction in the Langerhans cell population compared to non-smokers. The mean values of Langellans cell density in light smokers and heavy smokers were 2 2 2 28.64/mm and 33.421mm respectively compared to 66.51/mm in non- smokers. There was a dose-response relation between the number of cigarettes smoked daily and the effect on cell counts. These findings of a local immunological effect of smoking on oral epithelium may explain the means by which cigarette smoking contributes to the development of oral cancer.
Background: In an academic setting due to financial constrain, it is not uncommon during non-surgical procedures dental students and clinical supervisors wash their gloved hands with disinfectants in between patients or when touching on non-contaminated objects. Whether this practice could cause any deterioration of the glove and expose clinicians and patients to infectious micro-organisms was a concern.
Aim: The aim of this study was to investigate the effect of multiple washes of gloved hands with a disinfectant on the integrity of the gloves. Methods: Three brands of commonly used gloves in a dental school were tested for leaks after multiple washes with a disinfectant. Thirty pairs of each type of gloves were subjected to 0, 1, 5, 10, 20 and 30 washes with a disinfectant solution at a 5-minute interval between each wash. After each washing cycle, the gloves were filled with 1L of water and hanged for 2 minutes to observe any signs of water leaks.
Results: The results showed that the type of gloves and number of washes were significantly associated with the leakage rates (p<0.001). Washing of gloves for more than 5 times were at least 6 times higher to suffer from leakage (OR=6.23, 95% CI=2.14–18.08). Powdered gloves were almost 13 times higher to leak in all washes (OR=12.78, 95% CI= 4.40–37.14) and were almost 25 times more likely to leak when washed for more than 5 times (OR = 24.92, 95% CI = 5.79 – 107.21) when compared to the non-powdered gloves.
Conclusion: The practice of washing gloved hands with a disinfectant deteriorates the integrity of the gloves.
Key words: Cross infection, disinfectant, glove, leakage, micropores
The population in Malaysia use various types of health and food supplements. These products are considered safe and are used without any concern for their toxicity. Among the products used as health supplements are products that contain lactic acid bacteria. This project studied the acute and subacute toxicity of a product containing minerals, herbs, vitamins and live lactic acid bacteria, on Sprague- Dawley rats. Acute toxicity was tested 24 hours after a single dose and subacute toxicity was studied 24 hours after 7 days of daily dosing. The parameters that were studied were alanine aminotransferase (AL T,SGPT), aspartate aminotransferase (AST, SGOT), serum urea, ratios of weight of kidney and liver weight to body weight and percentage changes in body weights. The contents of capsules of the product (6, 8 or lO capsules for acute studies and 6, 10 and 12 for subacute studies) were mixed with corn oil and fed orally to rats. Control rats were fed with corn oil alone. In the acute studies, the level of ALT in the rats treated with the contents of the capsule was lower than controls. There were no significant changes in the other parameters of the rats in the treatment groups as compared to controls. There were no significant differences in all the parameters between rats in the treatment groups as compared to controls in the subacute studies. Sprague-Dawley rats fed with high doses of the product did not show signs of toxicity in the parameters that were studied.
Spindle-cell lipoma (SCL) of the oral cavity is very rare. There are only four such reported cases in the literature. A concise literature review of SCL and a case report of a SCL affecting the cheek and lip of a 23-year-old man is presented.
The objective of this study was to investigate the effect of various luting cement systems on bond strength of fibre-reinforced posts to root canal dentine. 40 extracted single rooted sound premolar teeth were root filled, decoronated and randomly divided into four groups. Fibre posts, Aestheti- Plus™ (Bisco,Inc. Schaumburg, IL, USA) were cemented using four luting cements: Group A (control): Elite 100® Zinc phosphate (GC Corp, Japan), Group B: Calibra ™ Esthetic Resin Cement (Dentsply Caulk, USA), Group C: RelyX ARC Adhesive Resin (3M ESPE), Group D: RelyX Unicem Aplicap (3M ESPE). Each root was sliced into 2 discs representing the coronal and middle portions of the root canal giving rise to 20 specimens per group. Bond strength was determined using push-out tests and data was analyzed using SPSS version 14.0. The mean bond strength of Group A to Aestheti-Plus™ post was 7.71 MPa (±2.51) and Group B was 5.69 MPa (±3.23). Group C exhibited the lowest mean bond strength, 4.29 MPa (±3.53) while the highest bond strength was obtained from Group D, 7.98 MPa (±2.61). One way ANOVA showed significant interaction between all groups (p=.OOI). Post-hoc Bonferroni test reve;iled that bond strength of Group C was significantly lower compared to Group A (p=.008) and D (p=.004). In conclusion, the mean bond strength of Aestheti- Plus™ post to root canal dentine was highest when cemented with RelyX Unicem resin cement followed by Elite 100® zinc phosphate cement, Calibra and RelyX ARC resin cements. However, the bond strengths of Cali bra and RelyX Unicem resin cements were not significantly different from Elite 100® zinc phosphate cement.
Prescription of flexible denture (FD) is non preference by the clinician in Ministry of Health Malaysia and it was not included in the curriculum of public university. However, among private dental practitioner (PDP) this treatment modality is highly favourable. Therefore, this study was conducted to assess the level of knowledge and perception on the flexible dentures by the PDP. The level of perception and knowledge on FD was analysed using validated questionnaire. 42 PDP had participated. An independent t-test was employed to determine the statistical difference between genders. One Way ANOVA was used to evaluate the statistical difference between their years of experience in private sector on knowledge and perception of flexible denture. There was no significant different in knowledge between female and male (p=0.892) and years of experience (p=0.617). Perceptions of flexible denture, was not significantly influence by genders (p=0.068) but by year of experiences between group A and B (p=0.039), and between group B and group C (p=0.039). P value was set at 0.05. In conclusion, there is a correlation between perceptions of flexible denture and years of experience of private dental practitioner.
Acrylic resin is commonly used to fabricate removable prostheses due to its adequate physical, mechanical
properties and cost effectiveness. There has been continuous development of the materials to improve their
properties and to widen their applications in different clinical settings. This study aimed to provide a
historical development of the acrylic resin and elaborate on the properties of different types and the
processing methods of acrylic resins used to fabricate denture base which are commercially available in the
market. This would help dental clinicians to choose the best material of choice in the market. The authors
have summarized the history, development and classification of different types of acrylic resins used in
fabricating dentures and processing methods based on published research available on this topic using
published materials available in the Dental Library, University of Malaya and the database (Science Direct,
PubMed). Every type of acrylic denture base material has its pros and cons. Therefore, careful selection of
the material and processing method is crucial to ensure patients are receiving the best outcome in
prosthodontic treatment hence upholding the patients’ best interest and improving their quality of life.
This case involved periodontal supportive care after non-surgical management of localized, severe chronic
periodontitis (possibly with a history of aggressive periodontitis) and periodontal abscess. This included
maintaining the current periodontal health, and rehabilitation of patient’s oral function and aesthetic concern
using simple, economical and reversible direct restorations without further damaging the patient’s dentition
for example composite resin as splint. Besides that, to address the patient’s complaint of unsightly gaps in
between the teeth, an acrylic gingival prosthesis with denture tooth incorporated was constructed.
Direct composite veneers can be used to mask tooth discolorations and/or to correct unaesthetic tooth forms and/or positions. However, these type of restorations are often regarded as one of the most challenging in aesthetic dentistry presumably due to the extent of natural tooth structure that must be recreated. This paper discusses easy application techniques and tips for Ceram.X Duo™, a nano ceramic composite restorative material. Its natural shading system allows the restoration of tooth with both dentine and enamel shade and transforms it into a final direct veneer restoration that mimics a natural tooth.
Temporary obturator is necessary for maxillectomy procedures to minimise functional disabilities of speech and the swallowing of food and fluid following surgery.l.2 It also provides a base to hold surgical packing and/ or tissue conditioners in place. This packing helps to restore function and counter act contraction during healing of the ,tissues at the operated site. Dental clinicians are often faced with the problem of surgical staffs requesting an obturator for their patients at short notice.This article describes a fast technique of constructing an immediate surgical obturator.
The construction of an electrical pain stimulator was described.
The parameters of pulse width and frequency on the quality of
pain stimulation was determined. The best design and construction
of the electrode for the stimulator was produced.
The clinical and histologic features of Kimura's disease are briefly outlined. A case presenting as a subcutaneous nodule in the region of the angle of the right mandible of a 20-year-old male is presented. The relationship of this disease to angiolymphoid hyperplasia with eosinophilia is discussed.
During post crown restoration, the preparation of the post canal can be fraught with difficulties resulting in widening, gouging and transportation of the post canal; sometimes with near root perforation. A technique is described to repair such iatrogenically damaged internal root canal walls using reinforcing resin composite and optic glass fibre posts. The root dentine, resin composite and glass fibres, having similar moduli of elasticity, will result in a repaired root with a ‘monolithic’ structure and possessing numerous desirable characteristics. This repair technique can easily be carried out in one sitting at the chairside thereby allowing the continued serviceability of the iatrogenically compromised root-filled tooth.
Besides other indications, the spring cantilever bridge can solve the difficult clinical problem of providing diastema on either side of a pontic. Unlike the conventional bridges, it has a somewhat controversial design in that the anterior pontic is connected to its retainer on a posterior abutment by a relatively long flexible palatal bar. This paper presents a case report of a spring bridge which fractured due to metal fatigue after 30 years of continued service. Other studies reported a mean life span of 8-10 years for conventional bridges. The advantages of the spring cantilever bridge are also discussed.
This study was undertaken to explore the perception of Year IV and Year V University of Malaya dental
students on different domains related to the competency based test (CBT). Methodology: A questionnaire
was constructed and a survey conducted to explore the students’ perception on four domains related to
the competency test: 1) benefits, 2) readiness to take, 3) timing and 4) lecturers’ supervision. Results: In
general, majority of the students agreed that they benefited from the competency test and felt adequately
prepared for each test. Students’ agreeing on feeling confident to sit for each test ranged from 70.0%-
81.4% for Year IV and 45.1%-70.4% for Year V. Majority of Year IV and Year V students perceived that
the timing of each competency test was ‘just right’. There was a high response of ‘Strongly agree/agree’
to availability of patients for practice and assessment, self-confidence and amount and distribution of
clinical session as factors affecting when they take the CBT. Majority of Year IV students agreed that the
assessment of lecturers was consistent for each tests while Year V had a high percentage of ‘Neutral’
response. Students’ agreeing that there was feedback after the test was 52.9%-71.4% for Year IV and
31.0%-56.5% for Year V. ‘Strongly agree/agree’ response of 68.6%-75.0% for Year IV and 36.6%-52.1%
for Year V was recorded for the level of supervision being the same after passing the test. Conclusion:
Overall, majority of students gave positive perception towards CBT in relation to four main domains
explored in this reseThis study was undertaken to explore the perception of Year IV and Year V University of Malaya dental
students on different domains related to the competency based test (CBT). Methodology: A questionnaire
was constructed and a survey conducted to explore the students’ perception on four domains related to
the competency test: 1) benefits, 2) readiness to take, 3) timing and 4) lecturers’ supervision. Results: In
general, majority of the students agreed that they benefited from the competency test and felt adequately
prepared for each test. Students’ agreeing on feeling confident to sit for each test ranged from 70.0%-
81.4% for Year IV and 45.1%-70.4% for Year V. Majority of Year IV and Year V students perceived that
the timing of each competency test was ‘just right’. There was a high response of ‘Strongly agree/agree’
to availability of patients for practice and assessment, self-confidence and amount and distribution of
clinical session as factors affecting when they take the CBT. Majority of Year IV students agreed that the
assessment of lecturers was consistent for each tests while Year V had a high percentage of ‘Neutral’
response. Students’ agreeing that there was feedback after the test was 52.9%-71.4% for Year IV and
31.0%-56.5% for Year V. ‘Strongly agree/agree’ response of 68.6%-75.0% for Year IV and 36.6%-52.1%
for Year V was recorded for the level of supervision being the same after passing the test. Conclusion:
Overall, majority of students gave positive perception towards CBT in relation to four main domains
explored in this resarch.