This paper reports the effect of microbending losses in single mode optical fiber
for pressure sensing system application. Several types of periodical corrugated
plates were fabricated, namely cylindrical-structured surface (Plate A) and
rectangular-structured surface (Plate B) with thicknesses of corrugated parts
were varied at 0.1 cm, 0.2 cm and 0.3 cm. Laser sources with excitation
wavelengths of 1= 1310 nm and 2= 1550 nm were launched at the first end
of the fiber. The values of losses were recorded by using an optical power
meter. It was clearly seen that the microbending losses were polynomially
increased with the increment of applied pressure and the thicknesses of
corrugated parts of Plate A and Plate B. The maximum microbending losses of
1.5185 dBm/kPa was resulted as SMF was coupled with corrugated plates B
with thicknesses of 0.3cm by using excitation wavelength of 1550nm. These
values reduced to 0.7628 dBm/kPa and 0.4014 dBm/kPa as the thicknesses
were decreased to 0.2cm and 0.1cm respectively. In comparison with a plain
plate which acted as a reference indicator, the maximum percentage of
microbending losses was obtained as 74.29 % for Plate A and 95.02 % for Plate
B. In conclusions, we successfully proved the ability of SMF as a pressure sensor
by manipulating the microbending losses experienced by the fiber. The
employment of 1550nm of laser wavelength results better sensitivity sensor
where the system able to detect large losses as the pressure applied on the
corrugated surfaces.
In this study, we investigate the ability of the bacterial isolates from an Iraqi oil
reservoir, namely POS and PCO Oil to decolorize commercially used model azo dye Acid
Red-27(AR-27). The effects of inoculation volume and glycerol concentrations were
optimized to develop an economically feasible decolourization process. The isolates
were able to decolourize azo dye (AR27) at the highest decolorization efficiency of 98%
in 10 mL bacterial solution consisted of POS and PCO Oil and in the presence of 6.34
g/L glycerol. An optimized MFC using this bacterial consortium (POS + PCO Oil) and
graphite rod electrodes produced a maximum open circuit voltage (OCV) of 175 mV, in
the presence of potassium ferricyanide as the electron acceptor at the cathode. The
maximum current density of 1.7 μA/cm² and power density of 59.3 μW/cm² were
achieved when an external load of 5 kΩ was applied. Morphological analysis was
performed using Scanning Electron Microscope (SEM) to prove the bacterial
attachment onto the anode surface (graphite rod) in the MFC operation. This work
proposed that the bacterial strains POS and PCO Oil possess the ability to decolorize
Azo dye AR27 and generate electricity in the absence of nitrogen source.
This paper assessed the relationship between team competency and design risk
management among Kuantan construction industries. Similarly, a survey was
conducted among 10 local and national construction industries in Kuantan with a
stratified random sampling. The returned questionnaires yielded 10 responses which
was used for data analysis. Five point Likert scale categories of risk management from
the previous studies was used and statistical analysis affirmed that there is positive
relationship between team competency and design risk management among Kuantan
construction industries.
In this paper, the influence of effective communication in construction risk
management among Kuantan Malaysian construction industries was assessed. Then a
survey was conducted on pilot test among 10 local construction industries in Kuantan
Malaysian, using stratified random sampling, out of which 10 questionnaires were
collected for data analysis. Methodologically, this research is perhaps the first to
study the influence of effective communication on construction risk management
among Kuantan Malaysian construction industries. Using the five point Likert scale
categories of risk management from previous studies. Pearson Correlation anaylysis
output results affirmed that there is a strong positive relationship between effective
communication and construction risk management among Kuantan construction
industries.
This paper assessed the significant relationship between organizational culture and
material risk among Kuantan Malaysian construction industries. Survey was
conducted among 10 registered G7 contractors operating in Kuantan construction
industry. Proportionate stratified random sampling was used out of which 10
questionnaires were distributed for pilot study. Methodologically, this research is
perhaps the first to assess the relationship between organizational culture and
material risk among Malaysian construction industries with five point Likert scale
categories of material risk from previous studies. Statistical analysis affirmed a
significant positive relationship between organizational culture and material risk
among Malaysian construction industries through Statistical Package for Social
Sciences (SPSS).
This paper assessed the effect of time overruns on apartment building among
Kuantan Malaysian construction industries. A survey was conducted among 10
construction industries in Kuantan Pahang. Using proportionate stratified random
sampling, out of which 10 questionnaires were distributed for data analysis. Using
five point Likert scale categories from previous studies, statistical analysis affirmed a
significant positive relationship between time overruns and apartment building
among Kuantan Malaysian construction industries.
This paper examined the significant relationship between government regulation and
construction waste management among Malaysian construction industries. Survey
was conducted among 10 contractors registered G7, using proportionate stratified
random sampling, out of which 10 questionnaire were collected for data analysis with
five point Likert scale categories of waste management from previous studies,
statistical analysis affirmed a significant positive relationship between government
regulation and construction waste management in Malaysian construction industries
through Statistical Package for the Social Sciences.
Phytoremediation is considered as a cost-effective and environmentally friendly
technique for decontaminating environments that have been contaminated with
heavy metal ions. The technique describes the use of plants and their concomitant
microbes to mitigate environmental contaminations. However, conventional
remediation techniques like chemical, thermal and physical treatment methods are
too costly, and may end of causing more contamination to the environment.
Phytoremediation practice provides a major information on the utilization of plants
and their materials in decontaminating polluted environments. Heavy metals and
other organic contaminants are among the most precarious substances released into
the environment which have an eminent level of toxicity and sturdiness of both
aquatic and terrestrial organisms. The review aimed at providing a broad
understanding of utilizing various plants and their materials in decontaminating
polluted environments with heavy metals and other organic contaminants. It also
provided the general methods used in treating the aforementioned contaminants in
an environment. The review further discussed the classes of phytoremediation like
phytoextraction, phytovolatilisation, phytostabilization, phytotransformation,
phytodegradation and phytofiltration. The generalized advantages and disadvantages
of phytoremediation were ultimately highlighted.