MyMedR

Displaying all 4 publications

Abstract:

Sort:

Fulltext Optoelectrical Properties of Treated CdSe Thin Films with Variations in Indium Chloride Concentration

Nisham Rosly H, Doroody C, Harif MN, Mohamad IS, Isah M, Amin N

Materials (Basel), 2023 May 31;16(11).
PMID: 37297242 DOI: 10.3390/ma16114108

The effect of a nontoxic chloride treatment on the crystallinity and optoelectrical characteristics of a CdSe thin film was studied. A detailed comparative analysis was conducted utilizing four molarities (0.01 M, 0.10 M, 0.15 M, and 0.20 M) of indium (III) chloride (InCl3), where the results showed a notable improvement in CdSe properties. The crystallite size of treated CdSe samples increased from 31.845 nm to 38.819 nm, and the strain in treated films dropped from 4.9 × 10-3 to 4.0 × 10-3, according to XRD measurements. The highest crystallinity resulted from the 0.10 M InCl3-treated CdSe films. The In contents in the prepared samples were verified by compositional analysis, and FESEM images from treated CdSe thin films demonstrated compact and optimal grain arrangements with passivated grain boundaries, which are required for the development of a robust operational solar cell. The UV-Vis plot, similarly, showed that the samples were darkened after treatment and the band gap of 1.7 eV for the as-grown samples fell to roughly 1.5 eV. Furthermore, the Hall effect results suggested that the carrier concentration increased by one order of magnitude for samples treated with 0.10 M of InCl3, but the resistivity remained in the order of 103 ohm/cm2, suggesting that the indium treatment had no considerable effect on resistivity. Hence, despite the deficit in the optical results, samples treated at 0.10 M InCl3 showed promising characteristics as well as the viability of treatment with 0.10 M InCl3 as an alternative to standard CdCl2 treatment.
Fulltext A comprehensive review of flexible cadmium telluride solar cells with back surface field layer

Ahmad NI, Kar YB, Doroody C, Kiong TS, Rahman KS, Harif MN, et al.

Heliyon, 2023 Nov;9(11):e21622.
PMID: 38027707 DOI: 10.1016/j.heliyon.2023.e21622

Recent advancements in CdTe solar cell technology have introduced the integration of flexible substrates, providing lightweight and adaptable energy solutions for various applications. Some of the notable applications of flexible solar photovoltaic technology include building integrated photovoltaic systems (BIPV), transportation, aerospace, satellites, etc. However, despite this advancement, certain issues regarding metal and p-CdTe remained unresolved. Besides, the fabrication of a full-working device on flexible glass is challenging and requires special consideration due to the unstable morphology and structural properties of deposited film on ultra-thin glass substrates. The existing gap in knowledge about the vast potential of flexible CdTe solar cells on UTG substrates and their possible applications blocks their full capacity utilization. Hence, this comprehensive review paper exclusively concentrates on the obstacles associated with the implementation of CdTe solar cells on UTG substrates with a potential back surface field (BSF) layer. The significance of this study lies in its meticulous identification and analysis of the substantial challenges associated with integrating flexible CdTe onto UTG substrates and leveraging Cu-doped ZnTe as a potential BSF layer to enhance the performance of flexible CdTe solar cells.
Fulltext Lattice mismatch alleviation in p-CdTe/n-Si heterostructure by surface engineering on Si substrate

Isah M, Doroody C, Rahman KS, Harif MN, Kiong TS, Zuhdi AWM

Heliyon, 2023 Nov;9(11):e21536.
PMID: 38027560 DOI: 10.1016/j.heliyon.2023.e21536

The study used magnetron sputtering to investigate the growth of cadmium telluride (CdTe) thin films on surface treated n-type silicon (n-Si) substrates. The n-Si substrates were textured using potassium hydroxide (KOH) before the sputter deposition of CdTe. This was followed by cadmium chloride treatment to reduce the strain at the interface of CdTe and Si, which is caused by the incompatible lattice and thermal expansion mismatch (CTE). X-ray diffraction (XRD) analysis showed that the lowest FWHM and dislocation densities were obtained for CdCl2/CdTe/txt-nSi, which aligns with the scanning electron microscopy (SEM) results. In the SEM images, the interface bonding between the CdTe and Si surfaces was visible in the cross-sections, and the top-view images revealed sputtered CdTe thin films conforming to the patterns of pyramidal textured Si as an engineered surface to capture more light to maximize absorption in the CdTe/Si tandem design. The Energy dispersive X-ray (EDX) results showed that all the CdTe deposited on textured n-Si exhibited more Te atoms than Cd atoms, irrespective of the CdCl2 treatment. The presented results suggest that the texturization and CdCl2 treatment improved the morphology and grain boundary passivation of the sputtered CdTe. The adhesiveness of CdTe on the n-Si substrate was also significantly enhanced. Our findings further demonstrate that proper surface treatment of the Si substrate can greatly improve the quality of CdTe grown on Si by reducing the strain that occurs during the growth process. This study demonstrates a valuable method for enhancing the integration of CdTe with Si for two-junction tandem solar cell applications.
Fulltext Exploring community behaviours and stakeholder challenges in engaging communities with dengue prevention behaviour in Malaysia: implementation research for a qualitative study with a community-based participatory research design

Samsudin NA, Karim N, Othman H, Naserrudin NA, Sahani M, Hod R, et al.

BMJ Open, 2024 Mar 12;14(3):e074222.
PMID: 38479731 DOI: 10.1136/bmjopen-2023-074222

OBJECTIVES: To use a community-based participatory research (CBPR) design to explore local community behaviours and stakeholders' challenges in engaging communities in dengue prevention behaviours in Hulu Langat, Selangor, Malaysia.
DESIGN: This CBPR design in implementation comprised in-depth interviews (IDIs) and focus group discussions (FGDs). Themes were identified from the data with inductive and deductive thematic analysis.
SETTING: FGDs were conducted in local community areas and IDIs were conducted in the local authority (LA) office and the Hulu Langat district health office.
PARTICIPANTS: All FGD and IDI participants consented to the study, and included health authorities (n=4), LAs (n=7), community leader (n=1), faith leader (n=1), patients diagnosed with dengue (IDIs, n=2) and permanent residents of Hulu Langat who had been exposed to dengue infectious disease (FGDs, n=27).
RESULTS: The main themes were categorised into community behaviour and stakeholder challenges. The community behaviour-related themes were awareness of dengue disease and Aedes mosquitoes, perception of risk and severity, and involvement of authorities. The themes related to stakeholder challenges were resource constraints and capacity issues, jurisdictional constraints and coordination, and educational dissemination and vandalism.
CONCLUSIONS: The actions of the authorities shape community and stakeholder behaviours. Effective communication, including clear and aesthetically pleasing messages, motivates individuals to take appropriate actions. It is crucial for the authorities to engage in inclusive communication and consider diverse perspectives, such as those of residents and individuals exposed to dengue infection. Authorities that provide accurate and unbiased information foster transparency and enable informed decision-making by all stakeholders.