Displaying all 4 publications

Abstract:
Sort:
  1. Khorramian K, Maleki S, Shariati M, Ramli Sulong NH
    PLoS One, 2015;10(12):e0144288.
    PMID: 26642193 DOI: 10.1371/journal.pone.0144288
    According to recent researches, angle shear connectors are appropriate to transfer longitudinal shear forces across the steel-concrete interface. Angle steel profile has been used in different positions as L-shaped or C-shaped shear connectors. The application of angle shear connectors in tilted positions is of interest in this study. This study investigates the behaviour of tilted-shaped angle shear connectors under monotonic loading using experimental push out tests. Eight push-out specimens are tested to investigate the effects of different angle parameters on the ultimate load capacity of connectors. Two different tilted angles of 112.5 and 135 degrees between the angle leg and steel beam are considered. In addition, angle sizes and lengths are varied. Two different failure modes were observed consisting of concrete crushing-splitting and connector fracture. By increasing the size of connector, the maximum load increased for most cases. In general, the 135 degrees tilted angle shear connectors have a higher strength and stiffness than the 112.5 degrees type.
  2. Adibi A, Maleki S, Adibi P, Etminani R, Hovsepian S
    Adv Biomed Res, 2017;6:47.
    PMID: 28503502 DOI: 10.4103/2277-9175.204590
    BACKGROUND: This study aimed to determine the prevalence of nonalcoholic fatty liver disease (NAFLD) and its related risk factors among the general population of Isfahan city located in the central part of Iran.

    MATERIALS AND METHODS: In this cross-sectional study, the prevalence of NAFLD among 483 general adult populations was determined using ultrasonography. Anthropometric and biochemical variables were compared in groups with and without NAFLD and their predictive value for occurrence of NAFLD was investigated also.

    RESULTS: Prevalence of NAFLD was 39.3%. Frequency of focal fatty infiltration (FFI), Grade I, Grade II, and Grade III of NAFLD was 9.5%, 21.1%, 7.2%, 1.4%, respectively. Prevalence of different types of NAFLD and FFI, was not different between female and male participants (P = 0.238). Ordinal regression was determined that all of the studied variables have significant predictive value for NAFLD (P < 0.001, γ = 0.615). Spearman correlation indicated that there was a significant relationship between NAFLD and BMI (r = 0.37, P < 0.001), age (r = 0.15, P = 0.001), FBS (r = 0.20, P < 0.001), cholesterol (r = 0.19, P < 0.001), triglyceride (r = 0.20, P < 0.001), LDL (r = 0.16, P < 0.001), AST (r = 0.17, P < 0.001), and ALT (r = 0.31, P < 0.001).

    CONCLUSIONS: Considering the high prevalence of NAFLD specially its lower grades among Isfahani adult general population and their association with studied variables, it seems that interventional studies which target-related mentioned risk factors could reduce the overall occurrence of NAFLD.

  3. Tahmasbi F, Maleki S, Shariati M, Ramli Sulong NH, Tahir MM
    PLoS One, 2016;11(8):e0156989.
    PMID: 27478894 DOI: 10.1371/journal.pone.0156989
    This paper investigates the behaviour of C-shaped and L-shaped angle shear connectors embedded in solid concrete slabs. An effective finite element model is proposed to simulate the push out tests of these shear connectors that encompass nonlinear material behaviour, large displacement and damage plasticity. The finite element models are validated against test results. Parametric studies using this nonlinear model are performed to investigate the variations in concrete strength and connector dimensions. The finite element analyses also confirm the test results that increasing the length of shear connector increases their shear strength proportionately. It is observed that the maximum stress in L-shaped angle connectors takes place in the weld attachment to the beam, whereas in the C-shaped angle connectors, it is in the attached leg. The location of maximum concrete compressive damage is rendered in each case. Finally, a new equation for prediction of the shear capacity of C-shaped angle connectors is proposed.
  4. GBD 2017 EMR Transport Injuries Collaborators, Safiri S, Sullman MJM, Lajunen T, Hill T, Almasi-Hashiani A, et al.
    Arch Iran Med, 2021 07 01;24(7):512-525.
    PMID: 34488316 DOI: 10.34172/aim.2021.74
    BACKGROUND: Transport-related injuries (TIs) are a substantial public health concern for all regions of the world. The present study quantified the burden of TIs and deaths in the Eastern Mediterranean region (EMR) in 2017 by sex and age.

    METHODS: TIs and deaths were estimated by age, sex, country, and year using Cause of Death Ensemble modelling (CODEm) and DisMod-MR 2.1. Disability-adjusted life years (DALYs), which quantify the total burden of years lost due to premature death or disability, were also estimated per 100000 population. All estimates were reported along with their corresponding 95% uncertainty intervals (UIs).

    RESULTS: In 2017, there were 5.5 million (UI 4.9-6.2) transport-related incident cases in the EMR - a substantial increase from 1990 (2.8 million; UI 2.5-3.1). The age-standardized incidence rate for the EMR in 2017 was 787 (UI 705.5-876.2) per 100000, which has not changed significantly since 1990 (-0.9%; UI -4.7 to 3). These rates differed remarkably between countries, such that Oman (1303.9; UI 1167.3-1441.5) and Palestine (486.5; UI 434.5-545.9) had the highest and lowest age-standardized incidence rates per 100000, respectively. In 2017, there were 185.3 thousand (UI 170.8-200.6) transport-related fatalities in the EMR - a substantial increase since 1990 (140.4 thousand; UI 118.7-156.9). The age-standardized death rate for the EMR in 2017 was 29.5 (UI 27.1-31.9) per 100000, which was 30.5% lower than that found in 1990 (42.5; UI 36.8-47.3). In 2017, Somalia (54; UI 30-77.4) and Lebanon (7.1; UI 4.8-8.6) had the highest and lowest age-standardized death rates per 100,000, respectively. The age-standardised DALY rate for the EMR in 2017 was 1,528.8 (UI 1412.5-1651.3) per 100000, which was 34.4% lower than that found in 1990 (2,331.3; UI 1,993.1-2,589.9). In 2017, the highest DALY rate was found in Pakistan (3454121; UI 2297890- 4342908) and the lowest was found in Bahrain (8616; UI 7670-9751).

    CONCLUSION: The present study shows that while road traffic has become relatively safer (measured by deaths and DALYs per 100000 population), the number of transport-related fatalities in the EMR is growing and needs to be addressed urgently.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links