MyMedR

Displaying all 5 publications

Abstract:

Sort:

Fulltext UV induced surface modification on improving the cytocompatibility of metallocene polyethylene

Jaganathan SK, Prasath MM

An Acad Bras Cienc, 2018 4 12;90(1):195-204.
PMID: 29641759 DOI: 10.1590/0001-3765201820170736

Demand for medical implants is rising day by day as the world becomes the place for more diseased and older people. Accordingly, in this research, metallocene polyethylene (mPE), a commonly used polymer was treated with UV rays for improving its biocompatibility. Scanning electron microscopy (SEM) images confirmed the formation of crests and troughs, which depicts the improvement of surface roughness of mPE substrates caused by UV etching. Accordingly, the contact angle measurements revealed that the wettability of mPE-2.5 J/cm2 (68.09º) and mPE-5 J/cm2 (57.93º) samples were found to be increased compared to untreated mPE (86.84º) indicating better hydrophilicity. Further, the UV treated surface exhibited enhanced blood compatibility as determined in APTT (untreated mPE- 55.3 ± 2.5 s, mPE-2.5 J/cm2 - 76.7 ± 4.1 s and mPE-5 J/cm2 - 112.3 ± 2 s) and PT (untreated mPE - 24.7 ± 1.5 s, mPE- 2.5 J/cm2 - 34.3 ± 1.1 s and mPE-5 J/cm2 - 43 ± 2 s) assay. Moreover, the treated mPE-2.5 J/cm2 (4.88%) and mPE-5 J/cm2 (1.79%) showed decreased hemolytic percentage compared to untreated mPE (15.40%) indicating better safety to red blood cells. Interestingly, the changes in physicochemical properties of mPE are directly proportional to the dosage of the UV rays. UV modified mPE surfaces were found to be more compatible as identified through MTT assay, photomicrograph and SEM images of the seeded 3T3 cell population. Hence UV-modified surface of mPE may be successfully exploited for medical implants.
Fulltext Investigation of attributes of bourbon oil and cobalt nitrate constituted electrospun nanoscaffolds for blood compatibility and in vitro bone formation

Jaganathan SK, Mani MP

An Acad Bras Cienc, 2021;93(4):e20201140.
PMID: 34705943 DOI: 10.1590/0001-3765202120201140

This work aims to fabricate scaffold using polyurethane (PU) integrated with bourbon oil (BB) and cobalt nitrate (CoNO3) using the electrospinning technique. Morphological investigation signified a fall in fibre diameter for the PU/BB and PU/BB/CoNO3 nanocomposite than the PU. Spectral analysis indicated that BB and CoNO3 were added within the PU matrix. Wettability analysis insinuated an increase in the hydrophobic nature of the PU/BB than the PU. PU/BB/CoNO3 turned to be hydrophilic due to the integration of CoNO3 in the polymer matrix. Mechanical testing of PU/BB and PU/BB/CoNO3 indicated an increase in the tensile strength of the fabricated composites. Atomic force microscopy (AFM) portrayed the reduction in the roughness of the PU/BB and PU/BB/CoNO3 compared to the PU. The coagulation studies invariably documented the improved anticoagulant behaviour and less toxic nature of the PU/BB and PU/BB/CoNO3 in comparison with the PU. Further, bone mineralization testing revealed the enhanced apatite formation of the nanocomposite. Nanocomposite scaffolds with the fore-mentioned properties hold good potential for bone tissue engineering.
Letter to Editor re: 'Mechanochemical endovenous ablation of saphenous veins using the ClariVein: A systematic review' - MOCA data reporting needs to be tighter and standardized!

Saravana K, Tang TY

Phlebology, 2017 12;32(10):679-681.
PMID: 28764596 DOI: 10.1177/0268355517724618
Extra-anatomical veno-venous surgical bypass for central vein occlusion in patients with ipsilateral arterio-venous fistula (AVF) for haemodialysis - A single centre experience

Saravana KS, Zainal AA

Med J Malaysia, 2017 02;72(1):3-6.
PMID: 28255132 MyJurnal

OBJECTIVE: Central vein occlusion is a common complication related to central vein catheter insertion for haemodialysis which can be unmasked by an ipsilateral fistula creation, leading to a dysfunctional arteriovenous fistula (AVF). We describe an extra-anatomical venous bypass surgical procedure performed to maintain vascular access and reduce the symptoms of swelling of the ipsilateral upper limb, neck and face.
MATERIALS AND METHODS: We report 20 consecutive patients with end-stage renal failure (ESRF) who had central vein occlusion and were not amenable to endovascular intervention. They underwent extra-anatomical vein to vein surgical bypass. The axillary and iliac or femoral veins were approached via infraclavicular and extraperitoneal groin incisions respectively. In all the patients, an externally supported 6 or 8 mm polytetrafluoroethylene (PTFE) graft was used as a conduit and was tunnelled extra-anatomical. All patients had double antiplatelet (Aspirin and Clopidogrel) therapy post-operatively.
RESULTS: Substantial improvement in the facial, neck and upper limb swelling was noticed following this diversion surgery. The vein to vein bypass was patent at 12 months in 10 out of 20 patients. Graft infection occurred in two (10%) cases. Re-thrombectomy or assisted patency procedure (stent/plasty) was done in four (20%) cases. The patients with preoperative fistula flow rate of more than 1500 ml/min and post-operative graft flow rate of more than a 1000 ml/min were patent at 12 months (P=0.025 and p=0.034 respectively).
CONCLUSION: Axillary to iliac/femoral vein bypass can salvage functioning ipsilateral fistula threatened by occluded upper central vein.
Fulltext Coeliac artery thrombosis: an uncommon cause of an acute abdomen

Saravana K, Zainal AA, Lee SK

Med J Malaysia, 2011 Aug;66(3):273-5.
PMID: 22111460 MyJurnal

Coeliac artery thrombosis with ischaemia is a rare condition, which usually presents with severe peptic ulcer disease symptoms. It is usually associated with risk factors for thrombosis or embolism. The manifestation is rare because of large number of collaterals between the coeliac and superior mesentery artery. Early detection and intervention is required to prevent the progression of its complications that includes gastric ischaemic necrosis.