Falls are among the main causes of injuries in elderly individuals. Balance and mobility impairment are major indicators of fall risk in this group. The objective of this research was to develop a fall risk feedback system that operates in real time using an inertial sensor-based instrumented cane. Based on inertial sensor data, the proposed system estimates the kinematics (contact phase and orientation) of the cane. First, the contact phase of the cane was estimated by a convolutional neural network. Next, various algorithms for the cane orientation estimation were compared and validated using an optical motion capture system. The proposed cane contact phase prediction model achieved higher accuracy than the previous models. In the cane orientation estimation, the Madgwick filter yielded the best results overall. Finally, the proposed system was able to estimate both the contact phase and orientation in real time in a single-board computer.
Trans-radial prosthesis is a wearable device that intends to help amputees under the elbow to replace the function of the missing anatomical segment that resembles an actual human hand. However, there are some challenging aspects faced mainly on the robot hand structural design itself. Improvements are needed as this is closely related to structure efficiency. This paper proposes a robot hand structure with improved features (four-bar linkage mechanism) to overcome the deficiency of using the cable-driven actuated mechanism that leads to less structure durability and inaccurate motion range. Our proposed robot hand structure also took into account the existing design problems such as bulky structure, unindividual actuated finger, incomplete fingers and a lack of finger joints compared to the actual finger in its design. This paper presents the improvements achieved by applying the proposed design such as the use of a four-bar linkage mechanism instead of using the cable-driven mechanism, the size of an average human hand, five-fingers with completed joints where each finger is moved by motor individually, joint protection using a mechanical stopper, detachable finger structure from the palm frame, a structure that has sufficient durability for everyday use and an easy to fabricate structure using 3D printing technology. The four-bar linkage mechanism is the use of the solid linkage that connects the actuator with the structure to allow the structure to move. The durability was investigated using static analysis simulation. The structural details and simulation results were validated through motion capture analysis and load test. The motion analyses towards the 3D printed robot structure show 70-98% similar motion range capability to the designed structure in the CAD software, and it can withstand up to 1.6 kg load in the simulation and the real test. The improved robot hand structure with optimum durability for prosthetic uses was successfully developed.
Background: Falls are a significant incident among older adults affecting one in every three individuals aged 65 and over. Fall risk increases with age and other factors, namely instability. Recent studies on the use of fall detection devices in the Malaysian community are scarce, despite the necessity to use them. Therefore, this study aimed to investigate the association between the prevalence of falls with instability. This study also presents a survey that explores older adults' perceptions and expectations toward fall detection devices. Methods: A cross-sectional survey was conducted involving 336 community-dwelling older adults aged 50 years and older; based on randomly selected participants. Data were analyzed using quantitative descriptive analysis. Chi-square test was conducted to investigate the associations between self-reported falls with instability, demographic and walking characteristics. Additionally, older adults' perceptions and expectations concerning the use of fall detection devices in their daily lives were explored. Results: The prevalence of falls was 28.9%, where one-quarter of older adults fell at least once in the past 6 months. Participants aged 70 years and older have a higher fall percentage than other groups. The prevalence of falls was significantly associated with instability, age, and walking characteristics. Around 70% of the participants reported having instability issues, of which over half of them fell at least once within 6 months. Almost 65% of the participants have a definite interest in using a fall detection device. Survey results revealed that the most expected features for a fall detection device include: user-friendly, followed by affordably priced, and accurate. Conclusions: The prevalence of falls in community-dwelling older adults is significantly associated with instability. Positive perceptions and informative expectations will be used to develop an enhanced fall detection incorporating balance monitoring system. Our findings demonstrate the need to extend the fall detection device features aiming for fall prevention intervention.
This paper presents a novel approach to predicting self-calibration in a pressure sensor using a proposed Levenberg Marquardt Back Propagation Artificial Neural Network (LMBP-ANN) model. The self-calibration algorithm should be able to fix major problems in the pressure sensor such as hysteresis, variation in gain and lack of linearity with high accuracy. The traditional calibration process for this kind of sensor is a time-consuming task because it is usually done through manual and repetitive identification. Furthermore, a traditional computational method is inadequate for solving the problem since it is extremely difficult to resolve the mathematical formula among multiple confounding pressure variables. Accordingly, this paper describes a new self-calibration methodology for nonlinear pressure sensors based on an LMBP-ANN model. The proposed method was achieved using a collected dataset from pressure sensors in real time. The load cell will be used as a reference for measuring the applied force. The proposed method was validated by comparing the output pressure of the trained network with the experimental target pressure (reference). This paper also shows that the proposed model exhibited a remarkable performance than traditional methods with a max mean square error of 0.17325 and an R-value over 0.99 for the total response of training, testing and validation. To verify the proposed model's capability to build a self-calibration algorithm, the model was tested using an untrained input data set. As a result, the proposed LMBP-ANN model for self-calibration purposes is able to successfully predict the desired pressure over time, even the uncertain behaviour of the pressure sensors due to its material creep. This means that the proposed model overcomes the problems of hysteresis, variation in gain and lack of linearity over time. In return, this can be used to enhance the durability of the grasping mechanism, leading to a more robust and secure grasp for paralyzed hands. Furthermore, the exposed analysis approach in this paper can be a useful methodology for the user to evaluate the performance of any measurement system in a real-time environment.
Engineering invention must be in tandem with public demands. Often it is difficult to identify the priorities of consumers where technological advancement is needed. In line with the global challenge of increasing fall prevalence among older adults, providing prevention solutions is the key. This study aims at developing an improved fall detection device using an approach called Quality Function Deployment (QFD). The goal is to investigate features to incorporate in existing device from consumer's perspectives. A three-phases design process is constructed; (1) Questionnaire, (2) Ishikawa Method, and (3) QFD. The proposed method begins with identifying customer needs as the requirement analysis, followed by a method to convert them to design specifications to be added in a fall detection device using QFD tool. As the top feature is monitoring balance, the new improved fall detection devices incorporating balance features will help older adults to monitor their level of risk of falling.