Displaying all 4 publications

Abstract:
Sort:
  1. Koting S, Karim MR, Mahmud H, Mashaan NS, Ibrahim MR, Katman H, et al.
    ScientificWorldJournal, 2014;2014:596364.
    PMID: 24526911 DOI: 10.1155/2014/596364
    Semi-flexible pavement surfacing is a composite pavement that utilizes the porous pavement structure of the flexible bituminous pavement, which is subsequently grouted with appropriate cementitious materials. This study aims to investigate the compressive strength, flexural strength, and workability performance of cementitious grout. The grout mixtures are designed to achieve high strength and maintain flow properties in order to allow the cement slurries to infiltrate easily through unfilled compacted skeletons. A paired-sample t-test was carried out to find out whether water/cement ratio, SP percentages, and use of silica fume influence the cementitious grout performance. The findings showed that the replacement of 5% silica fume with an adequate amount of superplasticizer and water/cement ratio was beneficial in improving the properties of the cementitious grout.
    Matched MeSH terms: Polycarboxylate Cement/chemistry*
  2. Abdullah H, Pearson GJ
    Asian J Aesthet Dent, 1993 Jul;1(2):91-4.
    PMID: 7921802
    The effect of temperature change on the working and setting time of a glass ionomer luting cement and a resin luting cement was measured using the oscillating rheometer. The time taken for each cement to set was calculated from the chart recordings. It was observed that as the temperature increased, the working and setting time of both materials decreased. However, the reduction was much more marked for the dual curing resin cement.
    Matched MeSH terms: Polycarboxylate Cement/chemistry*
  3. Tan BL, Mustafa AM
    Asia Pac J Public Health, 2003;15(2):118-23.
    PMID: 15038686
    Bisphenol A is the monomer used in the manufacture of polycarbonate. Bisphenol A is also known to mimic the female hormone estrogen. In this study, the possibility of the leaching of bisphenol A from polycarbonate babies' bottles and feeding teats was investigated. Bisphenol A was extracted from water samples exposed to the bottles and teats using liquid-liquid extraction. Bisphenol A was analysed by gas chromatograph-mass spectrometer with quadrapole detector in selected ion monitoring mode. Mean leaching of bisphenol A from 100 used babies' bottles when filled with water at 25 degrees C and 80 degrees C were 0.71 +/- 1.65 ng/cm2 (mean +/- standard deviation) and 3.37 +/- 5.68 ng/cm2 respectively. Mean leaching of bisphenol A from 30 new babies' bottles when filled with water at 25 degrees C and 80 degrees C were 0.03 +/- 0.02 ng/cm2 and 0.18 degrees 0.30 ng/cm2 respectively. Bisphenol A was observed to have leached from babies' feeding teats into 37 degrees C water ranged from non-detectable to 22.86 ng/g. The technique employed in this study is fast, reliable and economical.
    Matched MeSH terms: Polycarboxylate Cement/chemistry*
  4. Citartan M, Gopinath SC, Tominaga J, Chen Y, Tang TH
    Talanta, 2014 Aug;126:103-9.
    PMID: 24881539 DOI: 10.1016/j.talanta.2014.03.043
    Label-free-based detection is pivotal for real-time monitoring of biomolecular interactions and to eliminate the need for labeling with tags that can occupy important binding sites of biomolecules. One simplest form of label-free-based detection is ultraviolet-visible-near-infrared (UV-vis-NIR) spectroscopy, which measure changes in reflectivity as a means to monitor immobilization and interaction of biomolecules with their corresponding partners. In biosensor development, the platform used for the biomolecular interaction should be suitable for different molecular recognition elements. In this study, gold (Au)-coated polycarbonate was used as a platform and as a proof-of-concept, erythropoietin (EPO), a doping substance widely abused by the athletes was used as the target. The interaction of EPO with its corresponding molecular recognition elements (anti-EPO monoclonal antibody and anti-EPO DNA aptamer) is monitored by UV-vis-NIR spectroscopy. Prior to this, to show that UV-vis-NIR spectroscopy is a suitable method for measuring biomolecular interaction, the interaction between biotin and streptavidin was demonstrated via this strategy and reflectivity of this interaction decreased by 25%. Subsequent to this, interaction of the EPO with anti-EPO monoclonal antibody and anti-EPO DNA aptamer resulted in the decrease of reflectivity by 5% and 10%, respectively. The results indicated that Au-coated polycarbonate could be an ideal biosensor platform for monitoring biomolecular interactions using UV-vis-NIR spectroscopy. A smaller version of the Au-coated polycarbonate substrates can be derived from the recent set-up, to be applied towards detecting EPO abuse among atheletes.
    Matched MeSH terms: Polycarboxylate Cement/chemistry*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links