In this current investigation, the experimental performance of a solar still basin was significantly enhanced by incorporating snail shell biomaterials. The outcomes of the snail shell-augmented solar still basin (SSSS) are compared with those of a conventional solar still (CSS). The utilization of snail shells proved to facilitate the reduction of saline water and enhance its temperature, thereby improving the productivity of the SSSS. Cumulatively, the SSSS productivity was improved by 4.3% over CSS. Furthermore, the SSSS outperformed in energy and exergy efficiency of CSS by 4.5 and 3.5%, respectively. Economically, the cost per liter of distillate (CPL) for the CSS was 3.4% higher than SSSS. Moreover, the SSSS showed a shorter estimated payback period (PBP) of 141 days which was 6 days less than CSS. Considering the environmental impact, the observed CO2 emissions from the SSSS were approximately 14.6% higher than CSS over its 10-year lifespan. Notably, the SSSS exhibited a substantial increase in the estimated carbon credit earned (CCE) compared to the CSS. Ultimately, the research underscores the efficacy of incorporating snail shells into solar still basins as a commendable approach to organic waste management, offering economic benefits without compromising environmental considerations.
Molten salts are the operational fluid for most concentrated solar power (CSP) systems, which has attracted more attention among the scientific community due to the augmentation of their properties with the doping of nanoparticles. Hexagonal boron nitride (h-BN) nanoparticles were dispersed in HITEC molten salt to create a novel nanofluid and evaluate the h-BN nanoparticles' influence on HITEC thermophysical properties. The influence of nanoparticle concentration (0.1, 0.5, and 1wt.%) of h-BN and HITEC was studied in this research. HITEC and nano-enhanced HITEC molten salt (NEHMS) were characterized using energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), and Fourier transform infrared spectroscopy (FT-IR). Specific heat capacity, latent heat, and melting temperature were assessed using differential scanning calorimetry (DSC). The maximum working temperature was evaluated with thermogravimetric analysis (TGA). The ideal nanoparticle concentration is 0.1 wt.% h-BN, which results in a 27% increase in heat capacity, a 72% increase in latent heat, and a 7% enhancement in thermal stability. The thermal cycling stability test proved the stability of the enhanced thermophysical properties. The material characterization revealed that the samples with improved thermophysical properties have a homogeneous dispersion of nanoparticles with minor nanoparticle agglomeration. The system advisor model (SAM) simulation comparison of the optimum sample with solar salt and HITEC salt revealed that using the optimum sample increases CSP plant efficiency by 0.4% and reduces power costs by 0.13¢/kWh.
The traditional approach of open-sun drying is facing contemporary challenges arising from the widespread adoption of energy-intensive methods and the quality of drying. In response, solar dryers have emerged as a sustainable alternative, utilizing solar thermal energy to effectively dehydrate vegetables. This study investigates the performance of a single-basin, double-slope solar dryer utilizing natural convection for drying bottle gourds and tomatoes, presenting a sustainable alternative to traditional open-sun drying. The solar dryer exhibited superior moisture removal efficiency, achieving a 94.42% reduction in tomatoes and 83.87% in bottle gourds, compared to open-sun drying. Drying rates were significantly enhanced, with maximum air and plate temperatures reaching 54.42 °C and 63.38 °C, respectively, accelerating the dehydration process. Moisture diffusivity analysis revealed a marked improvement in drying behavior under solar drying, with values ranging from 3.12 × 10-11 to 4.31 × 10-11 m2/s for bottle gourds, and 4.65 × 10-11 to 2.31 × 10-11 m2/s for tomatoes. Energy efficiency assessments highlighted the solar dryer's advantage, with exergy efficiency peaking at 61.78% for bottle gourds and 68.5% for tomatoes. Furthermore, the activation energy required for drying was significantly lower in the solar dryer (29.14-46.41 kJ/mol for bottle gourds and 27.16-55.42 kJ/mol for tomatoes) compared to open-sun drying, enhancing energy conservation. Visual inspections confirmed the superior quality of the solar-dried vegetables, free from dust and impurities. An economic analysis underscored the system's viability, with payback periods of 2 years for bottle gourds and 1.6 years for tomatoes. Overall, this study demonstrates the efficacy of solar dryers in optimizing vegetable preservation while promoting energy efficiency, aligning with global sustainability goals by reducing post-harvest losses and supporting eco-friendly practices.