MyMedR

Displaying all 7 publications

Abstract:

Sort:

Determination of shell content in palm kernel cake

Siew WL

J AOAC Int, 1996 1 1;79(1):80-2.
PMID: 8620115

A method for determining shell in palm kernel cake (PKC) is described. This simple and rapid method requires little pretreatment compared with the method currently used in PKC trade, in which the sample undergoes defatting, acid and alkali digestion, and washing, before a chloroform-alcohol solution is used to separate the shells. In the proposed method, only defatting the sample is required. The shells are separated by the density difference between the shell and PKC in a potassium iodide solution. Recoveries of at least 93% were obtained, and the correlation coefficient between the actual shell content and the determined shell content was 0.999, with gradients of 0.97 and 0.98 for fine and coarse shell, respectively.

Matched MeSH terms: Potassium Iodide
Toxicity of tetramethylammonium hydroxide to aquatic organisms and its synergistic action with potassium iodide

Mori IC, Arias-Barreiro CR, Koutsaftis A, Ogo A, Kawano T, Yoshizuka K, et al.

Chemosphere, 2015 Feb;120:299-304.
PMID: 25151133 DOI: 10.1016/j.chemosphere.2014.07.011

The aquatic ecotoxicity of chemicals involved in the manufacturing process of thin film transistor liquid crystal displays was assessed with a battery of four selected acute toxicity bioassays. We focused on tetramethylammonium hydroxide (TMAH, CAS No. 75-59-2), a widely utilized etchant. The toxicity of TMAH was low when tested in the 72 h-algal growth inhibition test (Pseudokirchneriellia subcapitata, EC50=360 mg L(-1)) and the Microtox® test (Vibrio fischeri, IC50=6.4 g L(-1)). In contrast, the 24h-microcrustacean immobilization and the 96 h-fish mortality tests showed relatively higher toxicity (Daphnia magna, EC50=32 mg L(-1) and Oryzias latipes, LC50=154 mg L(-1)). Isobologram and mixture toxicity index analyses revealed apparent synergism of the mixture of TMAH and potassium iodide when examined with the D. magna immobilization test. The synergistic action was unique to iodide over other halide salts i.e. fluoride, chloride and bromide. Quaternary ammonium ions with longer alkyl chains such as tetraethylammonium and tetrabutylammonium were more toxic than TMAH in the D. magna immobilization test.

Matched MeSH terms: Potassium Iodide/toxicity*
Approaches to minimize tooth staining associated with silver diamine fluoride: A systematic review

Asghar M, Omar RA, Yahya R, Yap AU, Shaikh MS

J Esthet Restor Dent, 2023 Mar;35(2):322-332.
PMID: 36628650 DOI: 10.1111/jerd.13013

OBJECTIVE: To the effectiveness of different strategies to overcome silver diamine fluoride (SDF)-mediated tooth staining.
MATERIALS AND METHODS: Four online databases (PubMed, ScienceDirect, Scopus, and Web of Science) were searched using different MeSH terms and Boolean Operators to retrieve the articles (until June 2021), followed by a hand-search of the reference list of the included articles. All full-text, original studies in English that evaluated SDF staining and at least one SDF modification/alternative were included.
RESULTS: Among the assessed studies, nine studies explored the stain-minimization effect of potassium iodide (KI) post-application following SDF treatment. Among these, eight concluded that KI application after SDF treatment significantly reduced tooth staining, while one showed marginal staining following glass ionomer restoration of the SDF-treated dentine. Additionally, one study applied potassium fluoride (KF) and silver nitrate (AgNO3 ) concurrently to mitigate SDF-mediated staining. One study compared SDF staining with polyethylene glycol (PEG)-coated nanoparticles containing sodium fluoride (NaF), and another used nanosilver fluoride (NSF) for staining comparison with SDF.
CONCLUSIONS: Within the limitations of this study, the addition of different materials to SDF has proven to be a beneficial strategy for overcoming tooth staining associated with SDF. Future studies are warranted, particularly clinical trials, to validate these findings.
CLINICAL SIGNIFICANCE: SDF-mediated tooth staining is a serious concern that limits its clinical use. A review of various strategies to overcome this problem will help clinicians enhance its clinical use and patient acceptance.

Matched MeSH terms: Potassium Iodide/therapeutic use
Fulltext Removal of hydrogen sulfide from a biogas mimic by using impregnated activated carbon adsorbent

Zulkefli NN, Masdar MS, Wan Isahak WNR, Md Jahim J, Md Rejab SA, Chien Lye C

PLoS One, 2019;14(2):e0211713.
PMID: 30753209 DOI: 10.1371/journal.pone.0211713

Adsorption technology has led to the development of promising techniques to purify biogas, i.e., biomethane or biohydrogen. Such techniques mainly depend on the adsorbent ability and operating parameters. This research focused on adsorption technology for upgrading biogas technique by developing a novel adsorbent. The commercial coconut shell activated carbon (CAC) and two types of gases (H2S/N2 and H2S/N2/CO2) were used. CAC was modified by copper sulfate (CuSO4), zinc acetate (ZnAc2), potassium hydroxide (KOH), potassium iodide (KI), and sodium carbonate (Na2CO3) on their surface to increase the selectivity of H2S removal. Commercial H2S adsorbents were soaked in 7 wt.% of impregnated solution for 30 min before drying at 120°C for 24 h. The synthesized adsorbent's physical and chemical properties, including surface morphology, porosity, and structures, were characterized by SEM-EDX, FTIR, XRD, TGA, and BET analyses. For real applications, the modified adsorbents were used in a real-time 0.85 L single-column adsorber unit. The operating parameters for the H2S adsorption in the adsorber unit varied in L/D ratio (0.5-2.5) and feed flow rate (1.5-5.5 L/min) where, also equivalent with a gas hourly space velocity, GHSV (212.4-780.0 hour-1) used. The performances of H2S adsorption were then compared with those of the best adsorbent that can be used for further investigation. Characterization results revealed that the impregnated solution homogeneously covered the adsorbent surface, morphology, and properties (i.e., crystallinity and surface area). BET analysis further shows that the modified adsorbents surface area decreased by up to 96%. Hence, ZnAc2-CAC clarify as the best adsorption capacity ranging within 1.3-1.7 mg H2S/g, whereby the studied extended to adsorption-desorption cycle.

Matched MeSH terms: Potassium Iodide
Enhancement of fluoride release from glass ionomer cement following a coating of silver fluoride

Ariffin Z, Ngo H, McIntyre J

Aust Dent J, 2006 Dec;51(4):328-32.
PMID: 17256308

BACKGROUND: This study investigated the extent to which a coating of 10% silver fluoride (AgF) on discs of glass jonomer cements (GIGs) would enhance the release of fluoride ion into eluting solutions at varying pH.
MATERIALS AND METHODS: Forty discs each of Fuji LX, Fuji VII and of Vitrebond were prepared in a plastic mould. Twenty discs of each material were coated for 30 seconds with a 10% solution of AgF. Five discs each of coated and uncoated material were placed individually in 4m1 of differing eluant solutions. The eluant solutions comprised deionized distilled water (DDW) and three separate acetate buffered solutions at pH 7, pH 5 and pH 3. After 30 minutes the discs were removed and placed in five vials containing 4m1 of the various solutions for a further 30 minutes. This was repeated for further intervals of time up to 216 hours, and all eluant solutions were stored. Fluoride concentrations in the eluant solutions were estimated using a fluoride specific electrode, with TISAB IV as a metal ion complexing and ionic concentration adjustment agent. Cumulative fluoride release patterns were determined from the incremental data.
RESULTS: The coating of AgF greatly enhanced the level of fluoride ion release from all materials tested. Of the uncoated samples, Vitrehond released the greater concentrations of fluoride ion, followed by Fuji VII. However, cumulative levels of fluoride released from coated samples of the GICs almost matched those from coated Vitrebond.
CONCLUSIONS: It was concluded that a coating of 10% AgF on GICs and a resin modified GIC greatly enhanced the concentration of fluoride released from these materials. This finding might be applied to improving protection against recurrent caries, particularly in high caries risk patients, and in the atraumatic restorative technique (ART) of restoration placement.

Matched MeSH terms: Potassium Iodide/therapeutic use
Nasofacial zygomycosis

Ng KH, Chin CS, Jalleh RD, Siar CH, Ngui CH, Singaram SP

Oral Surg. Oral Med. Oral Pathol., 1991 Dec;72(6):685-8.
PMID: 1812451

Zygomycosis is an uncommon polymorphic fungal disease. One clinical subtype, nasofacial zygomycosis, is caused by infectious exposure to the organism Conidiobolus coronatus. A case affecting the nose and lips of a 42-year-old Malay man is reported here. The clinicopathologic features and management of this disease are described, and its differential diagnosis is discussed.

Matched MeSH terms: Potassium Iodide/therapeutic use
Fulltext The antibacterial efficacy of silver diamine fluoride (SDF) is not modulated by potassium iodide (KI) supplements: A study on in-situ plaque biofilms using viability real-time PCR with propidium monoazide

Abdullah N, Al Marzooq F, Mohamad S, Abd Rahman N, Rani KGA, Chi Ngo H, et al.

PLoS One, 2020;15(11):e0241519.
PMID: 33141868 DOI: 10.1371/journal.pone.0241519

Silver diamine fluoride (SDF) is commonly used to arrest caries lesions, especially in early childhood caries. Recently, it was suggested that SDF can be combined with potassium iodide (KI) to minimize the discoloration of demineralized dentine associated with SDF application. However, the antibacterial efficacy of SDF alone or combined with KI on in-situ biofilm is unknown. Hence, we compared the anti-plaque biofilm efficacy of two different commercially available SDF solutions, with or without KI, using an in-situ biofilm, analysed using viability real-time PCR with propidium monoazide (PMA). Appliance-borne in-situ biofilm samples (n = 90) were grown for a period of 6 h in five healthy subjects who repeated the experiment on three separate occasions, using a validated, novel, intraoral device. The relative anti-biofilm efficacy of two SDF formulations; 38.0% Topamine (SDFT) and 31.3%, Riva Star (SDFR), KI alone, and KI in combination with SDFR (SDFR+KI) was compared. The experiments were performed by applying an optimized volume of the agents onto the biofilm for 1min, mimicking the standard clinical procedure. Afterwards the viability of the residual biofilm bacteria was quantified using viability real-time PCR with PMA, then the percentage of viable from total bacteria was calculated. Both SDF formulations (SDFT and SDFR) exhibited potent antibacterial activities against the in-situ biofilm; however, there was non-significant difference in their efficacy. KI alone did not demonstrate any antibacterial effect, and there was non-significant difference in the antibacterial efficacy of SDF alone compared to SDF with KI, (SDFT v SDFR/KI). Thus, we conclude that the antibacterial efficacy of SDF against plaque biofilms is not modulated by KI supplements. Viability real-time PCR with PMA was successfully used to analyze the viability of naturally grown oral biofilm; thus, the same method can be used to test the antimicrobial effect of other agents on oral biofilms in future research.

Matched MeSH terms: Potassium Iodide