Displaying publications 21 - 30 of 30 in total

Abstract:
Sort:
  1. Hashim JH, Radzi RS, Aljunid SM, Nur AM, Ismail A, Baguma D, et al.
    Sci Total Environ, 2013 Oct 1;463-464:1210-6.
    PMID: 23759330 DOI: 10.1016/j.scitotenv.2013.04.084
    Natural, inorganic arsenic contamination of groundwater threatens the health of more than 100 million people worldwide, including residents of the densely populated river deltas of South and Southeast Asia. Contaminated groundwater from tube wells in Cambodia was discovered in 2001 leading to the detection of the first cases of arsenicosis in 2006. The most affected area was the Kandal Province. The main objective of this study was to determine the prevalence of arsenicosis in Cambodia based on acceptable criteria, and to investigate the use of hair arsenic as a biomarker not only for arsenicosis-related signs but also for associated symptoms. A cross-sectional epidemiological study of 616 respondents from 3 purposely selected provinces within the Mekong River basin of Cambodia was conducted. The Kandal Province was chosen as a high arsenic-contaminated area, while the Kratie Province and Kampong Cham Province were chosen as moderate and low arsenic-contaminated areas, respectively. The most prevalent sign of arsenicosis was hypomelanosis with a prevalence of 14.5% among all respondents and 32.4% among respondents with a hair arsenic level of ≥1 μg/g. This was followed by hyperkeratosis, hyperpigmentation and mee's lines. Results also suggest a 1.0 μg/g hair arsenic level to be a practical cut off point for an indication of an arsenic contaminated individual. This hair arsenic level, together with the presence of one or more of the classical signs of arsenicosis, seems to be a practical criteria for a confirmed diagnosis. Based on these criteria, the overall prevalence of arsenicosis for all provinces was found to be 16.1%, with Kandal Province recording the highest prevalence of 35.5%. This prevalence is comparatively high when compared to that of other affected countries. The association between arsenicosis and the use of Chinese traditional medicine also needs further investigation.
    Matched MeSH terms: Arsenic/analysis*
  2. Ong GH, Yap CK, Maziah M, Suhaimi H, Tan SG
    Environ Monit Assess, 2013 Apr;185(4):3243-54.
    PMID: 22821327 DOI: 10.1007/s10661-012-2787-6
    The first objective of this study was to provide data of arsenic (As) levels in Peninsular Malaysia based on soil samples and accumulation of As in Centella asiatica collected from 12 sampling sites in Peninsular Malaysia. The second objective was to assess the accumulation of As in transplanted C. asiatica between control and semi-polluted or polluted sites. Four sites were selected which were UPM (clean site), Balakong (semi-polluted site), Seri Kembangan (semi-polluted site) and Juru (polluted site). The As concentrations of plant and soil samples were determined by Instrumental Neutron Activation Analysis. The As levels ranged from 9.38 to 57.05 μg/g dw in soils, 0.21 to 4.33 μg/g dw in leaves, 0.18 to 1.83 μg/g dw in stems and 1.32-20.76 μg/g dw in roots. All sampling sites had As levels exceeding the CCME guideline (12 μg/g dw) except for Kelantan, P. Pauh, and Senawang with P. Klang having the highest As in soil (57.05 μg/g dw). In C. asiatica, As accumulation was highest in roots followed by leaves and stems. When the As level in soils were higher, the uptake of As in plants would also be increased. After the transplantation of plants to semi-polluted and polluted sites for 3 weeks, all concentration factors were greater than 50 % of the initial As level. The elimination factor was around 39 % when the plants were transplanted back to the clean sites for 3 weeks. The findings of the present study indicated that the leaves, stems and roots of C. asiatica are ideal biomonitors of As contamination. The present data results the most comprehensive data obtained on As levels in Malaysia.
    Matched MeSH terms: Arsenic/analysis*
  3. Md Khudzari J, Wagiran H, Hossain I, Ibrahim N
    J Environ Radioact, 2013 Jan;115:1-5.
    PMID: 22846873 DOI: 10.1016/j.jenvrad.2012.05.013
    This work presents a study of human hair as a bio-indicator for detection of heavy metals as part of environmental health surveillance programs project to develop a subject of interest in the biomedical and environmental sciences. A total of 34 hair samples were analyzed that consisting of 29 samples from sanitation workers and five samples from students. The hair samples were prepared and treated in accordance to the International Atomic Energy Agency (IAEA) recommendations. The concentrations of heavy metals were analyzed using the energy dispersive X-ray fluorescence (EDXRF) technique by X-50 Mobile X-ray Fluorescence (XRF) at Oceanography Institute, Universiti Malaysia Terengganu. The performance of EDXRF analyzer was tested by Standard Reference Material (SRM 2711) Montana Soil which was in good agreement with certified value within 14% deviations except for Hg. While seven heavy metals: Mn, Fe, Ni, Cu, Zn, Se, and Sb were detected in both groups, three additional elements, i.e. As, Hg and Pb, were detected only in sanitation workers group. For sanitation workers group, the mean concentration of six elements, Mn, Fe, Cu, Zn, Se, and Sb, shows elevated concentration as compared to the control samples concentration. Results from both groups were compared and discussed in relation to their respective heavy metals concentrations.
    Matched MeSH terms: Arsenic/analysis*
  4. Nordin N, Selamat J
    PMID: 24786623 DOI: 10.1080/19393210.2012.721140
    As, Cd, Pb and Hg were analysed in commonly consumed spices and herbs in Malaysia. The range of As, Cd, Pb and Hg content was 0.24-2.54, 0.23-8.07, 1.54-8.94 and 0.06-0.52 µg g(-1), respectively. The highest concentration of Cd, Pb and Hg in spices and herbs exceeded the maximum permitted proportion, which are 1, 2 and 0.05 µg g(-1), respectively. This study suggests further monitoring of Cd, Pb and Hg on daily consumption of spices and herbs and its toxicological implication for consumers since only the amount of As was lower than the permitted concentration.
    Matched MeSH terms: Arsenic/analysis
  5. Azlan A, Khoo HE, Idris MA, Ismail A, Razman MR
    ScientificWorldJournal, 2012;2012:403574.
    PMID: 22649292 DOI: 10.1100/2012/403574
    The drinking and mineral water samples obtained from different geographical locations had concentrations of the selected minerals lower than the standard limits, except for manganese, arsenic, and fluoride. The concentrations of manganese and arsenic in two mineral water samples were slightly higher than the standard international recommended limits. One mineral water sample had a fluoride concentration higher than the standard limits, whereas manganese was not detected in nine drinking and mineral water samples. Most of the selected minerals found in the tap water samples were below the international standard limits, except for iron and manganese. The concentrations of iron and manganese in the tap water samples were higher than the standard limits, which were obtained from one and three of the studied locations, respectively. The potable water obtained from various manufacturers and locations in Peninsular Malaysia is safe for consumption, as the minerals concentrations were below the standard limits prescribed by the Malaysian Food Regulations of 1985. The data obtained may also provide important information related to daily intake of these minerals from drinking water.
    Matched MeSH terms: Arsenic/analysis
  6. Cuong DT, Karuppiah S, Obbard JP
    Environ Monit Assess, 2008 Mar;138(1-3):255-72.
    PMID: 17562200
    Concentrations of heavy metals were determined in the water column (including the sea-surface microlayer, subsurface, mid-depth and bottom water) and sediments from Singapore's coastal environment. The concentration ranges for As, Cd, Cr, Cu, Ni, Pb and Zn in the seawater dissolved phase (DP) were 0.34-2.04, 0.013-0.109, 0.07-0.35, 0.23-1.16, 0.28-0.78, 0.009-0.062 and 0.97-3.66 microg L(-1) respectively. The ranges for Cd, Cr, Cu, Ni, Pb and Zn in the suspended particulate matter (SPM) were 0.16-0.73, 6.72-53.93, 12.87-118.29, 4.34-60.71, 1.10-6.08 and 43.09-370.49 microg g(-1), respectively. Heavy metal concentrations in sediments ranged between 0.054-0.217, 37.48-50.52, 6.30-21.01, 13.27-26.59, 24.14-37.28 and 48.20-62.36 microg g(-1) for Cd, Cr, Cu, Ni, Pb and Zn, respectively. The lowest concentrations of metals in the DP and SPM were most frequently found in the subsurface water while the highest concentrations were mostly observed in the SML and bottom water. Overall, heavy metals in both the dissolved and particulate fractions have depth profiles that show a decreasing trend of concentrations from the subsurface to the bottom water, indicating that the prevalence of metals is linked to the marine biological cycle. In comparison to data from Greece, Malaysia and USA, the levels of metals in the DP are considered to be low in Singapore. Higher concentrations of particulate metals were reported for the Northern Adriatic Sea and the Rhine/Meuse estuary in the Netherlands compared to values reported in this study. The marine sediments in Singapore are not heavily contaminated when compared to metal levels in marine sediments from other countries such as Thailand, Japan, Korea, Spain and China.
    Matched MeSH terms: Arsenic/analysis*
  7. Sari SA, Ujang Z, Ahmad UK
    Water Sci Technol, 2006;54(11-12):289-99.
    PMID: 17302332
    The objective of this study was to investigate the cycling of arsenic in the water column of a post-mining lake. This study is part of a research project to develop health risk assessment for the surrounding population. Inductively Coupled Plasma-Mass Spectrophotometer (ICP-MS) and Capillary Electrophoresis (CE) have been used to analyze the total amount and speciation, respectively. A computer program, called MINTEOA2, which was developed by the United States Environmental Protection Agency (USEPA) was used for predicting arsenic, iron, and manganese as functions of pH and solubility. Studying the pH values and cycle of arsenic shows that the percentage of bound arsenate, As(V) species in the form of HAsO4- increases with range pH from 5 to 7, as well as Fe(II) and Mn(III). As expected phases of arsenic oxides are FeAsO4 and Mn3(AsO4), as a function of solubility, however none of these phases are over saturated and not precipitated. It means that the phases of arsenic oxides have a high solubility.
    Matched MeSH terms: Arsenic/analysis*
  8. Ibrahim N
    Appl Radiat Isot, 1994 Aug;45(8):897-8.
    PMID: 8081326
    This study determines the trace metal content in Anadara Granosa L., a popular seafood amongst South-East-Asians. Using the technique of instrumental neutron activation analysis (INAA) identification has been made of the presence of 17 trace metals including elements which are classified as toxic (As, Br, Cs) and those which are rare-earths (Eu, Ce, Lu, Tb, Yb).
    Matched MeSH terms: Arsenic/analysis
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links