Geographically, Malaysia is situated in the equatorial region, thus having a climate of hot and humid throughout the
year. Effect of heat stress and physical work load at construction industry need to be investigated because of the high number of
accidents. Thus, perception of physical workload and heat stress by the construction workers in Malaysia needed to be investigated
and documented. The aim of this paper is to establish a set of questionnaires containing the item generation regarding on physical
workload and the heat stress perception of construction workers. Physical workload factors such as fatigue, risks, concentration,
work rhythm, responsibility, satisfaction, and autonomy are inserted as the items in assessing the physical workload. While heat
stress are assessed using heat risk factors such as temperature, humidity, heat radiation, air movement, workload, clothing and
acclimatisation. A questionnaire has been developed resulted from various reviewing of literatures on physical workload and heat
stress and better suited to the Malaysia working environment.
Societal dynamics and increased public demands on education have produced adverse stressful classroom situation that have led to increase emotional and physical disabilities among teacher. The main objective of this descriptive study was to identify the causes of occupational stress amongst secondary school teachers. This study also conducted in order to determine the suitable ways and strategies at helping teachers to cope with the work related pressures that have increased during the past decade. The samples of this study were 100 teachers from four secondary schools in Dungun District, Terengganu. The data were descriptively analyzed based on the responds on a set of questionnaires, checklist and 20 interview sessions conducted for exploration of coping strategy with 20 out of 100 teachers. Based on the finding, it can be concluded that interpersonal relations, physical conditions and job interest contribute towards workrelated stress among teachers. Also discussed the 10 most frequently used coping strategies by teachers. Therefore, there are suggesting measures, which teachers may take to help them cope more effectively with potentially stressful situations at school.
Local Exhaust Ventilation (LEV) is required to absorbed the chemical and at the same time to maintain the air quality. This
study is purposed to create new design of LEV system that believe can remove air contaminants in the chemical store buildings. This
research was conducted using two (2) types of LEV system which are 4 air-inlets LEV (type 1) and 3 air-inlets LEV (type 2). That LEV
has been simulated using ANSYS FLUENT software for their air flow performances. LEV material and the cost of production were
considered parameter for fabricating and effectiveness of LEV system. Results show that air velocity in LEV type 1 was gradually
uniform throughout its ducting network but it increased at the 90º bend section with a maximum air velocity of 31.054 m/s. In the LEV
type 2, the air flow simulations depicted uniformity velocity values of 8.12 m/s, 8.58 m/s and 7.69 m/s at every inlet respectively. The
finding suggests that LEV type 2 was more efficient compared to LEV type 1 due to increasing streamline air velocity.
Legionellosis is a respiratory infection caused by gram-negative bacteria known as Legionella. Although there are
many species of Legionella, the majority of all reported cases of legionellosis were caused by Legionella pneumophila.
Investigations of Legionella outbreaks comprised sampling building water systems for the presence of Legionella.
The aim of this study is to determine the isolation techniques with the most optimal yield for detection of Legionella
based on the Australian/New Zealand Standard Waters –Examination for Legionella (AS/NZS 3896:2008). This is an
experimental research, in which, Legionella species will be spiked in a bottle of water and various isolation techniques
will be conducted. As most cases of Legionellosis are caused by Legionella pneumophila group, this group of species
will be used.
This study aims to investigate a visual status and prevalence of visual problems in relation to eye safety and health amongst
visual display terminal (VDT) users in industries. A visual profile questionnaire (VPQ) and visual tests were conducted on workers
from 9 type of industries aged 20 to 60 years old in between October 2015 and June 2016. Workers with a history of exposure to VDT
more than 2 hours a day were used as a baseline for recruitment. Respondents who did not complete the visual profile questionnaires
(VPQ) and visual tests were excluded from the study. A total of 1214 respondents with mean aged of 39.33 ± 9.80 years have completed
the study. Most respondents show moderate to high in vision problems in related to VDT, low knowledge on visual hazards and policy
in relation to eye safety and health at the workplace and high percentage of not getting proper eye tests while serving their industries.
Visual Profile (VP) is needed as a key indicator to profile eye safety measures and the need for policy to help prevent eye problems and
improve employees’ productivity at workplace.
This study aims to assess the level of Knowledge, Attitude and
Practices (KAP) on Musculoskeletal Disorders (MSDs) from employer perspectives
in Malaysia industries. A developed KAP questionnaires were distributed and
returned by 39 employers. Most employer show good scores to majority of items in
Knowledge and Attitude sections. However, good practices are still lacking as the
scores are quite low for half of the items. Kruskal-Wallis test for independent sample
was used to test the relationship between gender and KAP scores. It was found out
that gender is linked with few items in Knowledge and Attitude section (r < 0.05)
while no indication of relationship with Practice scores. As the number of reported
MSDs cases are increasing in Malaysia, hence understanding of KAP factors are
crucial in order to tackle the problem.
Rapid development of technology has made simulator as a promising training tool. Advantages offered such as interactive and realistic training environments, mistake tolerance and training in hazardous scenario without causing harm to trainee, cost effectiveness, opportunity of training review and training time flexibility makes simulator widely used in aviation training, driver training, medical training and rehabilitation. Despite of these advantages, a major drawback of simulator is simulator sickness. Simulator sickness is a condition caused by inconsistency perceived by our vestibular system. Effected individual reported that they are experiencing nausea, fatigue, postural instability, headaches and difficulty in focusing which linger for hours or days in some cases. This paper will discuss the simulator usage and simulator sickness condition in Malaysia as experienced by researchers and a few organizations that use simulator as their training tool.
Brush cutting is a commonly performed activity occupationally as well as recreationally in Malaysia. There are various occupational injuries reported related to brush cutting, for example foreign body penetration. There were 11 reported cases of foreign body penetrated in leg of brush cutting workers admitted to orthopaedic ward in Hospital Raja Permaisuri Bainun from the period of January till October 2009. Among the cases, 4 were surgically removed under local anaesthesia and 7 cases performed under general anesthesia. 2 cases reported foreign body penetrated into tibia bone. There were many contributing factors to the injury, which include lack of protective measures for workers, engineering property of brush cutting machine and education on handling of equipment. It is vital to study the factors separately in order to determine and recommend useful preventive measures. However, the actual numbers of cases are under reported and awareness of the problem is undermined.
In the development of current vehicle capabilities required an effective braking system, has a little wear, and
safety riding. The objective of the research is to determine wear and braking distance because of braking load and
speed motorcycle Honda supra X125 cc. This research used the speed of 50 km/h, 60 km/h, and 70 km/h. Braking load
used to be 4 kg, 5 kg, and 6 kg. The test was done by dynamic method and the research was done in two stages; testing
in the field and measuring brake wear in the lab using a profile projector. Testing the hardness of brake was done to
know hardness brake before and after testing due to the effect of wear, braking time, and braking distance.From testing
it was found that increasing of braking load, resulted in increasing wear. The smallest wear was 6 x 10-5 mm/sea at a
speed of 50 km/h, braking load of 4 kg, and braking time of 15.94 seconds. Increasing the speed resulted in increasing
braking distances with the smallest of braking distance was 55 meters at the breaking load of 6 kg, the speed of 50
km/h and braking time 9.93 seconds. The hardness of brake lining, increased after the brake lining wear testing. The
hardness before the test was 95.8 HRN and after the test was 100.4 HRN.
Exposure to traffic air pollutant have shown a significant health effect on respiratory systems and decreased in lung function among traffic policemen. The main objective of this study was to determine the relationships between personal exposure levels to PM2.5 and respiratory health among traffic policemen working at Traffic Police Station in Kuala Lumpur and general duty policemen attached to Police Headquarters, Bukit Aman. A cross sectional comparative study was conducted among 50 traffic policemen from Traffic Police Station Kuala Lumpur and 50 general duty policemen from Police Headquarters Bukit Aman as comparative group. A purposive sampling method was used to select the respondents based on inclusive criteria such as age between 25 to 60 years, no history of respiratory disease and working not less than 3 years as traffic policemen. Questionnaire based on ATS (1978) was used to collect information on socio-demographic and respiratory symptoms. Spirometer (Spirolab II Model) was used to perform lung function tests. Personal Air Sampling Pump (Aircheck 52) was used to measure personal exposure level to PM2.5. The mean exposure level of PM2.5 among the traffic policemen was 22.33 ± 8.54μg/m³ compared to only 5.60 ± 4.29μg/m³ for comparative group. There was a significant difference in all lung function parameters between the exposed group and comparative group.From the finding, it shows that there was significant relationship between working duration (years) and lung function parameters among both exposed and comparative group. The result from this research shows that traffic policemen were determined as having lower lung function parameters due to their nature of work and the environment. Also, there was a significant association between exposure to fine particle (PM2.5) and lung function among the exposed group. Finding from this study indicated that exposure to elevated concentration level to traffic related air pollutant was the risk factors in the development of respiratory diseases as shown by the higher prevalence of respiratory symptoms and the reduction in lung function among traffic policemen.
Stress reduces the performance and productivity of employees.
One of the most important stressors originate from organizational factors,
which are decision latitude, psychological demand, social support and job
insecurity. This creates four kinds of jobs: passive, active, low strain and high
strain. The objective of the study is to determine the association between
organizational factors with occupational stress and cortisol level among
lecturers in University Selangor. This cross-sectional study used a purposive
sampling, which involved 45 lecturers from various faculties. The instrument
used in this study was Job Content Questionnaire (JCQ) which is a
Psychosocial Job Assessment Instrument designed by Karasek et al., (1998).
The questionnaire has been translated to Malay version by Edimansyah et al.,
(2006). 10ml of blood sample was collected from each respondent by certified
phlebotomist. Results from the statistical analysis showed that majority of the
respondents were female (75.6%), aged below forty years old (82.2%), married
(77.8%) and hold a master degree (68.9%). Most of the respondents were
found having low decision latitude 35(77.5%). Majority of the respondents
were also found in passive group 13(28.9%) which were having low
psychological job demand and low decision latitude, while others are in low
strain 11(24.4%), high strain 11(24.4%) and active group 10(22.2%)
respectively. There was a significant association between two organizational
factors with occupational stress level, which are decision latitude and
psychological job demand (p0.05). As a
conclusion, two out of four organizational factors, which are decision latitude
and psychological job demand showed a significant association with
occupational stress levels. Cortisol as one of stress biomarkers may not be
significant due to small sample size.
Indoor air quality is a term which refers to the air quality in and around buildings and structures, in which it
is related to the health and comfort of those who are in the building. The study aims to identify the relationship
between environmental factors with microbe growth by investigating the concentration of airborne bacteria and
fungi at National Institute of Occupational Safety and Health (NIOSH) and to determine whether indoor bacteria and
fungi concentration were associated with environmental factors such as temperature relative humidity and carbon
dioxide concentration. This research was conducted concurrently with indoor air quality sampling as per requirement
under the Malaysian Code of Practice of Indoor Air Quality (COP IAQ). The COP IAQ requires minimum of one
sample to be taken from each area. If an area consists of a few separated rooms, each room is sampled and measured
independently. Also this approach was used to determine whether there is a difference of indoor bacteria and fungi
in different microenvironments. Results show that there is a significant correlation between humidity and bacteria
concentration and fungi concentration; and between temperature and bacteria concentration. However, there is no
significant correlation between temperature and fungi concentration. This study has also established significant
difference on bacteria concentration and fungi concentration between microenvironments.
Today, more accidents reported in school, resulting not only minor injuries but also severe injuries such as fire in schools, mercury spills and falling from high places. The study was aimed at measuring the level of occupational safety and health practices in schools. The study was conducted at 205 schools in Kelantan, Malaysia. This study is a semi-quantitative study using observation method. Data collection is conducted based on Hazard Identification, Risk Assessment and Risk Control (HIRARC) Guidelines provided by the Department of Occupational Safety and Health, Malaysia. Hazard identification, risk assessment and risk control are determined using the HIRARC form. The findings were measured by determining the discrete data according to the number of low, medium and high-risk levels found. The study found that there were two dominant hazards namely physical hazard and ergonomic hazard. Therefore, the management should increase and improve classroom safety awareness to ensure safety and health of all occupants.
The construction industry is an important industry in the Malaysian’s economy. Much has been said about the quality of the product as well as the image of the industry due to the small percentage of local workers on site. The industry’s welfare and safety record is not at all encouraging. To stop the rot, the government has taken important and significant steps by the establishment of the Malaysian Construction Industry Development Board (CIDB) and the National Institute of Occupational Safety and Health (NIOSH). These efforts have shown some significant positive improvement in the perception and action of those involved in the industry but we are still far from the standard shown in other developed countries in terms of site safety. This paper is to discuss the roles and responsibilities of the key players in the industry be it the clients, consultants or contractors. The focus is on the ‘upstream’ activities i.e. the pre-construction stage, rather than the ‘downstream’ i.e. the construction phase of a project.
The aim of this paper is to identify, review and carry out comparison to seven guidelines where the main focus is on its risk
assessment elements related to confined space activities. This is due to lack of the specific approach of the Legislation for confined
space such as entry procedure requirements, risk assessment method, existing practice of risk assessment is too general and additional
references are required for conducting risk assessment which would lead to poor response from industries. The selected guidelines will
be summarized on its requirements, followed by a review of each guideline and finally the comparison of Legislations will be carried
out. The results from the study would be used as a contribution factor to promote an ideal method in developing an effective risk
assessment tools for working safely in confined space. Furthermore, several literatures which have been referred could give additional
input for developing the risk assessment tools.
This study intended to investigate the level on airborne microbe in indoor air for new constructed building. It was divided by three different phase of building commissioning in Bandar Baru Bangi, Selangor. The first phase of the sampling was carried out after the building fully handed over from the main contractor to the building owner. Second phase of the sampling take place after the building is equipped with furniture. Phase three sampling is conducted after one month of building occupancy. Airborne microbes’ concentrations were determined by using a single stage impactor (Biosampler) as per requirement of National Institute of Occupational Safety and Health (NIOSH) method, NIOSH Manual Analytical Method MAM 0800. The total concentration of airborne bacteria and fungi were average to 641 and 38 CFU/m³ in the first phase, 133 and 117 CFU/m³ in the second phase, and 389 and 52 CFU/m³ in the third phase. These findings indicate that although a new constructed building should be having a significant background level of airborne microbe (total bacteria and total fungi). The building owner should be aware to their indoor air status to protect the occupant from the safety and health problem (risk) especially for ventilated building.
This study was done to investigate the background level on microbiological indoor air pollutants in new constructed 8 stories buildings (2 level of Hostel facilities, 3 level of Training Room level, 2 level of Offices and 1 Exhibition Halls and Rooms) in Bandar Baru Bangi, Selangor. The offices and exhibition hall are carpeted furnished. All these spaces were using centralized air conditioning system. Airborne microbes’ concentrations were determined by using a single stage impactor (Biosampler) as per requirement of National Institute of Occupational Safety and Health NIOSH method NIOSH Manual Analytical Method MAM 0800. Mean concentration of total bacteria detected is 1351 CFU/m3 and it was found significantly higher compared to maximum exposure limit 500 CFU/m3 in office room. The mean concentration of total fungi in the office rooms is 479 CFU/m3 and it was found slightly lower compared to maximum exposure limit 500 CFU/m3. The airborne microbe levels were found slightly lower in the accommodation, training and exhibition rooms compared to office room. These findings indicate that although a new constructed building should be having a significant background level of airborne microbe (total bacteria and total fungi).
A study has been conducted on trans,trans-muconic acid (t,t-MA) as the biomarker for benzene exposure among
oil and gas petrol tanker drivers. The objectives of this study are to determine the significant difference and the
correlation between Benzene personal exposure and urinary t,t-MA among exposed and non-exposed workers. A total
of 92 questionnaires were distributed to obtain demographic and descriptive data. Benzene personal exposure was
sampled using SKC passive samplers and the data was analyzed using GC-FID. Urinary t,t-MA was collected at end of
work shift and analyzed using HPLC-UV detector. A total of 30 non-exposed workers were also sampled. The averages
of urinary t,t-MA were 96.65 ug/g creatinine for exposed workers and 0.51 ug/g creatinine for non-exposed workers.
Meanwhile, the averages of Benzene personal exposure were 0.37 mg/m3 and 0.01 mg/m3 for exposed workers and
non-exposed workers respectively. No significant correlation was found between exposure to benzene with excreted
urinary t,t-MA of workers occupationally exposed (p-value > 0.05) as well as to workers non-exposed to benzene
(p-value > 0.05). In conclusion, there is no significant correlation found between Benzene personal exposure and
urinary t,t-MA among exposed and non-exposed workers. Applicability of using t,t-MA as the biomarker of benzene
exposure shall be further discussed with all the other confounding factors to be taken into account.
This study has been conducted in a new constructed building of NIOSH Malaysia located at Bandar Baru Bangi, Selangor. The goal of the case study is focusing on the level of Indoor Air Contaminants (IAC) including chemical contaminants within three consequent stages which are before furniture install, after furniture install and during one month occupancy. This study was divided the sampling area into two main facilities which are training and office setting. The contaminants has been measured consist of sixparameters such as Carbon Dioxide (CO2), Carbon Monoxide (CO), Total Volatile Organic Compounds (TVOC), Formaldehyde, Respirable Particulates (PM10) and Ozone. The result of Carbon Monoxide (CO), Total Volatile Organic Compound (TVOC), Respirable Particulates (PM10) and Ozone show an increasing trend across the three sampling stages. The Formaldehyde show an increasing trend in the first and second stages but were reduced significantly the last stage of sampling. These finding indicates that furniture and fittings installed might be a potential sources of indoor air contaminants. The management should be aware to their indoor air status to protect the occupant from the risk of unwanted exposure especially during the early stage of building occupancy.
Digital Millennials (i.e., people born from 1980 to 2004) have often been portrayed as quick to embrace emerging technologies. The envisioned future of Industry 4.0 entails the blending of hardware, software, and people to complete work; and given their affinity for digital resources, technology, and social networking applications, the Millennials could be regarded as a much-needed asset in this future workforce. However, systematic research on how this cohort understands and reacts to safety issues surrounding the use of technologies has been lacking. In particular, behaviours such as impulsivity, online disinhibition, and risk-taking among them remain unclear. The present study investigated this gap with a sample of 203 Millennials of various nationality groups. Using the short version of the Urgency, Premeditation, Perseverance, Sensation Seeking, and Positive Urgency (Short UPPS-P) scale, the Revised Online Disinhibition Scale, and the Online Risky Behaviour scale, the results indicated that the most significant predictors of online risk-taking behaviours are lack of premeditation, positive urgency, and toxic disinhibition. Interestingly, though not hypothesised, was gender as a significant predictor of the outcome. The findings implied that these variables might be the most relevant target areas for interventions that could modify risky behaviours in cyberspace. The study’s findings are discussed in relation to the key challenges associated with e-safety where the future trends would be heading towards the gig economy and crowd-working.