The effect of partial substitution of pumpkin flour for rice flour on the physical properties and sensory attributes of gluten-free muffin were investigated. Pumpkin flour was used to replace 10, 15 and 20% rice flour in a control gluten-free muffin formulation (without pumpkin flour). The partial substitution of pumpkin flour for rice flour did not affect moisture content of gluten-free muffins. However, the pumpkin flour substitution caused significant reduction in water activity of gluten-free muffins. Results on the volume, specific volume and height of all gluten-free muffins showed no significant effect with the increasing percentage of pumpkin flour substitution. However, pumpkin flour substitution significantly reduced the firmness of composite muffins, and improved its springiness. The colour of crumb progressively became darker as the level of pumpkin flour substitution increased. Moreover, the results also showed that the substitution of pumpkin flour caused an increase in yellowness (b*) value of crust and crumb of gluten-free muffin. Sensory evaluation indicated that all gluten-free muffins incorporated with pumpkin flour received similar score when compared to that of control.
This work aimed to evaluate the effect of Atmospheric Cold Plasma (ACP) on the quality of mango flour noodles (NMF). ACP treatment of 5 minutes duration on the surface of the noodles strands were performed and evaluated during three days of storage by monitoring parameters related to colour, water activity, antioxidant activity and total phenolic content. The lightness value (L*) was higher for untreated samples (NMF (U)) than for treated samples (NMF (T)), while a greater increased in the redness (a*) and yellowness (b*) values were observed for the NMF (T). The changes in aw, antioxidant activity and total phenolic content (TPC) were negligible. However the NMF (T) showed significant different (p
Processing of soybeans to other products and consumption of soy products is increasing worldwide mainly due to acclaimed health benefits. Processing can alter soybean sensory appeal, nutritive value and potentially affect consumer health. Rhizopus oligosporus was used to ferment soybean for 3 days. The tempeh flour (TF) was produced form tempeh while defatted tempeh flour (DTF) was then produced from TF by immersing in hexane solvent while soy protein isolate (SPI) was prepared from DTF by using alkali and acid followed by neutralization treatment. In this study, nutritional properties and amino acid content of tempeh, TF, DTF and SPI were determined. Therefore, the objective of this study is was to evaluate the effect of each treatment on the chemical composition and amino acid content for all the samples. The results showed that the nutritional properties (total ash, moisture, crude fat, total carbohydrate and crude fibre) were reduced significantly (p < 0.05) except for protein content. Protein content was significantly (p < 0.05) increased by 50.5% in SPI. For amino acid content, the results obtained showed that SPI contain highest amount of essential and non-essential amino acid followed by DTF, Tempeh and TF. Glutamic acid was found to be the highest amino acid component in all samples. The evaluation from the results showed that SPI can be considered as potential functional food ingredients.
Fennel (Foeniculum vulgare Mill.) and coriander (Coriandrum sativum L.) are known to possess good antimicrobial properties. In the present work, spice-infused frozen parathas were formulated to investigate the effect of fennel and coriander on microbial (aerobic mesophilic bacteria, yeast and mould, and Bacillus cereus) reduction and sensory acceptability of frozen paratha throughout the storage at -18°C. The present work was also aimed at determining the relationship between spice concentrations and storage durations on microbiological quality of the samples. Fennel and coriander seed powder were used at concentrations of 2, 4 and 6% of wheat flour (w/w). The microbiological analysis was performed by total plate count, yeast and mould count, and Bacillus cereus count after 9, 12 and 15 weeks of storage. Sensory evaluation was conducted using hedonic scales at the end of storage durations. Results showed that spice infusion in frozen paratha significantly delayed the growth of aerobic mesophilic bacteria, yeasts and moulds, and Bacillus cereus during storage. The lowest log count was demonstrated by coriander at 6% in total plate count (3.85, 3.90 and 3.91 log10 CFU/g), and yeast and mould count (2.54, 2.59 and 2.60 log10 CFU/g) after 9, 12 and 15 weeks, respectively. Bacillus cereus was not detected throughout the storage durations. Fennel exhibited minimum activity against Bacillus cereus with no significant difference on log count reduction when compared with control. Coriander showed the highest decrease in both total plate count and Bacillus cereus count during the storage duration. Sensory evaluation result indicated that control sample exhibited the highest preference over all attributes when compared with fennel and coriander. Coriander-infused paratha was slightly darker in colour due to high concentration of 6%. Fennel yielded the lowest score in terms of taste among all samples. Fennel and coriander showed no significant difference for sensory acceptability. Overall, all frozen parathas were in good quality after 15 weeks of frozen storage. It can thus be concluded that fennel and coriander can be used as potential natural preservatives to inhibit the growth of microorganisms in paratha during frozen storage. Nevertheless, the optimum spice concentration should be determined to minimise the effects on the sensory attributes.
The intake of dietary fibre (DF) has been proven to lower the risk of chronic diseases, leading to the increasing demand for fibre-enriched bakery product. Banana is one of the most consumed fruits that exhibits rich sources of DF and provides excellent nutritional health benefits. However, overripe banana is discarded due to its low quality and appearance. Thus, the present work was aimed to determine the properties of chocolate cookies formulated with overripe banana pulp powder (OBPP) as partial replacement (0, 6, 8, and 10%) for wheat flour. Nutritional composition, physical properties, and sensory acceptability of the cookies were analysed using AOAC methods, texture profile analyser, and 7-point hedonic scaling method, respectively. Results showed that increased incorporation of OBPP significantly increased the nutritional values of chocolate cookies. Chocolate cookies formulated with 10% of OBPP recorded the highest total dietary fibre (8.21%) and ash (1.23%) contents. In texture profile analysis, the firmness of the chocolate cookies was recorded to increase slightly with increasing level of OBPP, although this was not significant. Sensory scores for the control (0%) and 6% OBPP-incorporated cookies were not significantly different for all the sensory attributes. However, the incorporation of 8% OBPP produced the highest scores in terms of aroma, flavour, and overall acceptance. In summary, the addition of 8% OBPP could be an effective way to produce nutritious and the most palatable chocolate cookies.
Mushroom cultivation has been more popular recently in Malaysia. They are favoured due to their delicious flavour and low calorific value. Apart from that, they also contain high amount of protein and other essential nutrients. As recommended by food pyramid, people should take in more of their calories from whole grains-based foods than any other sources. Three selected carbohydrate based products namely rice-porridge (RP), paratha flat bread (PB) and conventional cake (CC) were formulated with dried Pleurotus sajor-caju (PSC) powder. All three products were analyzed for proximate analysis and sensory evaluation. Result shows the percentage of moisture, ash, fat and protein of RP increased in line with the levels of PSC powder used except for carbohydrate. Whereas for PB and CCs added with 2%, 4% and 6% PSC, the percentage of all nutrients were higher than control (0%) except for fat. Mushroombased RP had significantly higher value of odour attribute as compared to control, with RP added with 6% PSC powder received the highest score. Meanwhile, mushroom-based PB received better score on textural attribute compared the control. In CC, panels prefer the cake added with 4% PSC powder as they gave higher scores for softness and flavour attributes. In conclusion, addition of PSC powder to partially replace rice and wheat flour in RP, CC and PB enhance essential nutritional components and well accepted by consumers. Thus, PSC powder can be considered to be utilized in carbohydrate–based food products with the purpose of enhancing nutrient compositions without affecting its sensory acceptance.
The development of food products using composite flour has increased and is attracting much attention from researchers, especially in the production of bakery products and pastries. This article focuses on the use of composite flour to produce food products, namely bread, biscuits, and pasta, with looks at on its impact, following some improvements made, on the sensory quality, rheology characteristics, and nutritional values as well as its overall acceptance. The blending of wheat flour with various sources of tubers, legumes, cereals and fruit flour in different percentages to produce variety of food products are also reported in this review. It was found that composite flour used to produce food products is still able to maintain similar characteristics to products made from full-wheat flour. The positive effects of the use of composite flour can be seen in the final product related to the functional and physicochemical properties and health benefits of raw blended flour along with percentage blending. Overall, composite flour is a good new approach to utilizing uncommon food products as the application of composite flour produced products with different characteristics and quality, depending on the types and percentage of wheat flour used in the formulation.
The textural and sensorial properties of the cookies prepared by partial substitution of wheat flour with two types of unripe banana flour (UBF) were studied. The green matured unripe banana (Musa x paradisiaca var. Tanduk and Musa acuminata var. Emas) was used to partially substitute the usage of wheat flour at 0% (control), 25% and 50% level in the formulated plain cookies. Textural (hardness) and sensorial properties were conducted on all samples. Substitution of UBF to formulation of cookies had increased the hardness of cookies (ranging from 967 N to 1665 N) compared to the control except for substitution of Emas banana flour (EBF) at 50% which was not significantly difference (p > 0.05) with control sample. The substitution of 25% of Tanduk banana flour (TBF) showed the highest mean score in overall acceptability (6.81 ± 1.18) compared to all treated samples. TBF substitution is feasible up to 50% substitution while for EBF, the substitution only up to 25% level in this study.
Banana pulp (BP) noodles prepared by partial substitution of wheat flour with green Cavendish banana pulp flour were assessed pH, color, tensile strength and elasticity, and in-vitro hydrolysis index (HI) and estimated glycemic index (GI). BP noodles had lower L* (darker) and b* values (less yellow) but higher tensile strength and elasticity modulus than control noodles. Following an in-vitro starch hydrolysis studies, it was found that GI of BP noodles was lower than control noodles. Partial substitution of green banana pulp into noodles may be useful for controlling starch hydrolysis of yellow noodles.
This study evaluated the effects of different flours (tapioca, wheat, sago and potato) on the physicochemical properties of duck sausage. The examined physicochemical properties included proximate composition, cooking yield, color (lightness, redness and yellowness), folding, texture profile (hardness, elasticity, cohesiveness, gumminess and chewiness) and sensory properties. The study found that different flours have no effect on the cooking yield of duck sausage. The tapioca formulation showed a mid-range lightness value, folding score and textural properties. Duck sausages made with wheat flour had higher protein content and lightness value and a harder texture. Sausages made with potato flour had a darker color, the lowest folding scores and a softer texture. The addition of sago flour resulted in a higher folding score, greater elasticity and increased overall acceptability of sausage due to higher scores for texture and juiciness. These results show that the properties of duck sausage are influenced by the type of flour used.
This study was to investigate the effects of wheat flour substitution with legume flour (mung bean and chick pea) in cookies in terms of the physicochemical and organoleptic properties. Three formulations of cookies were prepared from (a) Control (100% wheat flour), (b) Mung bean (50% wheat flour + 35% mung bean flour + 15% corn flour) and (c) Chickpea (50% wheat flour + 35% chickpea flour + 15% corn flour). The physicochemical and organoleptic attributes of the three types of cookie were evaluated. Results showed significant different (p
The objective of this study was to evaluate the effects of using tapioca and sago flours with or without egg white powder (EWP) on the physicochemical and sensory properties of duck sausages. There was significant increase (P0.05) in hardness and cohesiveness attributes among all the samples examined but significant differences (P
Two high protein wheat flour samples of Red Horse (RH) and Bake with Yen (BY) were examined for predominant Lactobacillus spp. in fermented liquid sourdough. The identification of Lactobacillus spp. was based on biochemical tests of catalase test, gas carbon dioxide production, arginine test, the ability to grow at temperature of 15°C and 45°C and carbohydrate fermentation using API50CH kit. Those strains were identified as Lactobacillus spp. and confirmed using polymerase chain reaction (PCR) of 16S rRNA partial sequencing analysis. In the present study, we successfully isolated and identified the Lactobacillus plantarum and L. fermentum which were predominant bacteria in liquid sourdough of the sample RH and BY brand, respectively.
The banana pseudo-stem is not currently utilised in the food industry. The aim of this research was to investigate the chemical and pasting profile of banana pseudo-stem flour (BPF). Wheat flour were substituted with BPF (0, 5, 15 and 30%) and the pasting profile were determined. Results from mineral analysis showed that the levels of sodium (Na), potassium (K), calcium (Ca), magnesium (Mg) and phosphorus (P) were higher than those of iron (Fe), zinc (Zn) and manganese (Mn). The BPF had a 0.04% total titratable acidity (TTA) and a total soluble solid (TSS) of 1.30⁰ Brix with pH 5.41. BPF contained 28.26% total starch, 12.81% resistant starch and a total digestible starch value of 15.45%. An increased substitution level of BPF into wheat flour significantly (p
Proximate, functional and pasting properties of a new variety of sweet potato, VitAto, flour, known for its high vitamin A contents, were compared with two other commercial sweet potatoes, Bukit Naga and Okinawan, flour available in Malaysia. The recoveries of each sweet potato from milling were not significantly different at about 20% but in proximate analysis, the VitAto presented the highest protein (5.7%) and dietary fiber (14.8%) contents with more energy 399.6 kcal/100 g produced. The VitAto flour has average particle size of 132.04 μm. The pasting temperature of the VitAto flour was 65oC, with highest setback and trough viscosity values of 530.90 and 197.20 mPa.s, respectively. The flour is classified as easy flowing and stable powders. This study provides information which helps in the handling, packing and storage of sweet potato flours. It also shows that the VitAto flour has an array of functional, pasting and proximate properties that can facilitate its uses in many areas with better nutritional properties.
The effects of orange sweet potato flour addition to tapioca starch on the expansion, oil absorption,
bulk density, water absorption index (WAI), water solubility index (WSI), hardness and colour of fried extruded fish crackers were investigated. The microstructure properties were assessed by Field Emission Scanning Electron Microscope (FESEM) and the sensory properties of fried extruded fish crackers were determined by quantitative descriptive analysis method. The shape and texture of the product were similar to that of normal breakfast cereal. Light brownish and slightly harder texture was obtained with addition of orange sweet potato flour to tapioca starch in the fried extruded fish crackers. The bulk density and water solubility index (WSI) increased with the increase in orange sweet potato flour addition. However, water absorption index (WAI), linear expansion, expansion ratio, volume expansion and oil absorption decreased as the amount of orange sweet potato increased. The microstructure studies revealed that fried extruded fish crackers with high percentage of orange sweet potato flour had small air cells and thick cell wall. The fried extruded fish crackers with 30% fish, 14% orange sweet potato flour and 56% tapioca starch had high crispiness score and accepted by the trained panellists.
Quality attributes of steamed bread without green banana flour (BF) (CON), substituted with 30%
BF (BBFI) and 30% BF + 8% gluten (BBFII) were determined. The green banana flour (BF) and the mixture of wheat flour (WF) substituted with 30% BF + 8% gluten (FBFII) was significantly highest in water holding capacity and oil holding capacities, respectively. Potassium, calcium and magnesium were significantly higher in BBFI and BBFII than CON. Significantly highest insoluble dietary fibre and total dietary fibre shown in BBFI. Steaming resulted significant reduction in resistant starch content in BBFI as compared with the dough of BBFI I. The specific volume of BBFII and CON showed significant different compared to the BBFI. The BBFII spread ratio was significantly highest and steamer spring lowest than CON. BBFII showed significantly highest in hardness and adhesiveness values but CON was significantly highest in cohesiveness, elasticity and chewiness. L and Hue values was shown highest in CON. BBFII indicated highest acceptability score than other samples.
Media components such as wheat flour, MgSO4 and particle size were screened by Placket Burman design (PBD) while the operating range was fixed by one-factor-at-a-time method (OFAT), primarily for the enrichment of cassava peels as animal feed. Optimization of the selected media components was carried out using Face–Centered Central Composite Design (FCCCD) of the Response Surface Methodology (RSM) and the responses were measured in term of protein and lignin contents. Statistical analysis of the result showed that the quadratic term of wheat flour and the interaction between wheat flour and particle size were highly significant (P
The objective of this project was to determine the physico-chemical and sensory characteristics of bread supplemented with four different levels (control, 5%, 10%, and 15%) of pumpkin flour. The physical (weight, loaf volume, specific volume and oven spring) and chemical (moisture, protein, fat, fibre and ash) attributes were determined in the raw pumpkin, pumpkin flour (PF), control and supplemented breads. Sensory attributes were conducted on the control and supplemented breads. Increasing the level of substitution from 5% to 15% pumpkin flour significantly (p
Response Surface Methodology (RSM) with Central Composite Rotatable Design (CCRD) was performed in this study to develop an acceptable reduced calorie chocolate cake. The range of the independent variables, namely Jackfruit Seed (JFS) flour (20-25% replacement of wheat flour) and polydextrose (10-15% replacement of sucrose) were identified which affect the volume, specific volume, symmetry and uniformity of the chocolate cake. The coefficient of determination, R2 values for volume, specific volume, symmetry and uniformity were greater than 0.900. The optimum level for replacement of sugar with polydextrose was at 11% and wheat flour with JFS flour was at 16% with calorie reduction approximately 34% from the control cake formulation.