Plastic waste is being manufactured for the production of hydrogen. The amount of plastic waste collected annually is 189,953 tonnes from adjacent nations like Indonesia and Malaysia. Polyethylene (PE), Polypropylene (PP), Polyethylene Terephthalate (PET), Polyvinyl chloride (PVC), and Polystyrene (PS) are the five most prevalent forms of plastic found in most waste. Pyrolysis, water gas shift and steam reforming reaction, and pressure swing adsorption are the three main phases utilized and studied. In this research, authors examines the energy consumption on every stage. The plastic waste can be utilized to manufacture many hydrocarbons using the pyrolysis reaction. For this process, fast pyrolysis is being used at a temperature of 500 °C. A neutralization process is also needed due to the presence of Hydrochloric acid from the pyrolysis reaction, with the addition of sodium hydroxide. This is being carried to prevent any damage to the reactor during the process. Secondly, the steam reforming process continues after the water gas shift reaction has produced steam and carbon monoxide, followed by carbon dioxide and hydrogen formation. Lastly, pressure swing adsorption is designed to extract H2S and CO2 from the water gas shift and steam reforming reaction for greater purity of hydrogen. From the simulation study, it is observed that using various types of plastic waste procured (total input of 20,000 kg per hour of plastics) from, Brunei Darussalam, Malaysia and Indonesia, can produce about 340,000 tons of Hydrogen per year. Additionally, the annual profit of the Hydrogen production is estimated to be between $ 271,158,100 and $ 358,480,200. As per the economic analysis, it can be said that its a good to start hydrogen production plant in these regions.
A Nanogrid (NG) model is described as a power distribution system that integrates Hybrid Renewable Energy Sources (HRESs) and Energy Storage Systems (ESSs) into the primary grid. However, this process is affected by several factors, like load variability, market pricing, and the intermittent nature of Wind Turbines (WTs) and Photovoltaic (PV) systems. Hence, other researchers in the past have used a few optimization-based processes to improve the development of Energy Management Systems (EMSs) and ESSs, which further enhanced the operational performance of NGs. It was seen that EMS acts as the distributed energy source in the NG setup and assists in power generation, usage, dissemination, and differential pricing. Hence this study employed the MATLAB Simulink software for modelling the grid-connected NG that included HRES; such as wind and PV; in addition to 3 Battery Storage Devices (BSDs) to design an effective EMS for the NG system and decrease its overall costs. For this purpose, a Rule-Based EMS (RB-EMS) that employs State Flow (SF) to guarantee a safe and reliable operating power flow to the NG has been developed. In addition to that, a Genetic Algorithm (GA)-based optimization system and Simulated Annealing optimization Algorithm (SAA) were proposed to determine an economical solution for decreasing the cost of the NG system depending on its operational constraints. Lastly, comparison about the cost between RB-EMS, GA and SAA has been presented. According to the simulation results, the proposed GA displayed an economical performance since it could achieve a 40% cost saving whereas the SAA system showed a 19.3% cost saving compared to the RB-EMS. It can be concluded from the findings that the GA-based optimization technique was very cost-effective displays many important features, like rapid convergence, simple design, and very few controlling factors.
Internet of Things (IoT) paves the way for the modern smart industrial applications and cities. Trusted Authority acts as a sole control in monitoring and maintaining the communications between the IoT devices and the infrastructure. The communication between the IoT devices happens from one trusted entity of an area to the other by way of generating security certificates. Establishing trust by way of generating security certificates for the IoT devices in a smart city application can be of high cost and expensive. In order to facilitate this, a secure group authentication scheme that creates trust amongst a group of IoT devices owned by several entities has been proposed. The majority of proposed authentication techniques are made for individual device authentication and are also utilized for group authentication; nevertheless, a unique solution for group authentication is the Dickson polynomial based secure group authentication scheme. The secret keys used in our proposed authentication technique are generated using the Dickson polynomial, which enables the group to authenticate without generating an excessive amount of network traffic overhead. IoT devices' group authentication has made use of the Dickson polynomial. Blockchain technology is employed to enable secure, efficient, and fast data transfer among the unique IoT devices of each group deployed at different places. Also, the proposed secure group authentication scheme developed based on Dickson polynomials is resistant to replay, man-in-the-middle, tampering, side channel and signature forgeries, impersonation, and ephemeral key secret leakage attacks. In order to accomplish this, we have implemented a hardware-based physically unclonable function. Implementation has been carried using python language and deployed and tested on Blockchain using Ethereum Goerli's Testnet framework. Performance analysis has been carried out by choosing various benchmarks and found that the proposed framework outperforms its counterparts through various metrics. Different parameters are also utilized to assess the performance of the proposed blockchain framework and shows that it has better performance in terms of computation, communication, storage and latency.
A numerical analysis of a CdTe/Si dual-junction solar cell in terms of defect density introduced at various defect energy levels in the absorber layer is provided. The impact of defect concentration is analyzed against the thickness of the CdTe layer, and variation of the top and bottom cell bandgaps is studied. The results show that CdTe thin film with defects density between 1014 and 1015 cm-3 is acceptable for the top cell of the designed dual-junction solar cell. The variations of the defect concentrations against the thickness of the CdTe layer indicate that the open circuit voltage, short circuit current density, and efficiency (ƞ) are more affected by the defect density at higher CdTe thickness. In contrast, the Fill factor is mainly affected by the defect density, regardless of the thin film's thickness. An acceptable defect density of up to 1015 cm-3 at a CdTe thickness of 300 nm was obtained from this work. The bandgap variation shows optimal results for a CdTe with bandgaps ranging from 1.45 to 1.7 eV in tandem with a Si bandgap of about 1.1 eV. This study highlights the significance of tailoring defect density at different energy levels to realize viable CdTe/Si dual junction tandem solar cells. It also demonstrates how the impact of defect concentration changes with the thickness of the solar cell absorber layer.
Hindlimb suspension (HLS) mice exhibit osteoporosis of the hindlimb bones and may be an excellent model to test pharmacological interventions. We investigated the effects of inhibiting endoplasmic reticulum (ER) stress with 4-phenyl butyrate (4-PBA) on the morphology, physicochemical properties, and bone turnover markers of hindlimbs in HLS mice. We randomly divided 21 male C57BL/6J mice into three groups, ground-based controls, untreated HLS group and 4-PBA treated group (HLS+4PBA) (100mg/kg/day, intraperitoneal) for 21 days. We investigated histopathology, micro-CT imaging, Raman spectroscopic analysis, and gene expression. Untreated HLS mice exhibited reduced osteocyte density, multinucleated osteoclast-like cells, adipocyte infiltration, and reduced trabecular striations on micro-CT than the control group. Raman spectroscopy revealed higher levels of ER stress, hydroxyproline, non-collagenous proteins, phenylalanine, tyrosine, and CH2Wag as well as a reduction in proteoglycans and adenine. Furthermore, bone alkaline phosphatase and osteocalcin were downregulated, while Cathepsin K, TRAP, and sclerostin were upregulated. Treatment with 4-PBA partially restored normal bone histology, increased collagen crosslinking, and mineralization, promoted anti-inflammatory markers, and downregulated bone resorption markers. Our findings suggest that mitigating ER stress with 4-PBA could be a therapeutic intervention to offset osteoporosis in conditions mimicking hindlimb suspension.
The effects of IT and R.I.C.E. treatment on arm muscle performance in overhead athletes with elbow pain (EP) have been partially validated. However, there is a lack of research evidence regarding the efficacy of these two methods on arm muscle performance among swimmers with EP. The aim of this study was to investigate the trends and differences in the effects of IT and R.I.C.E. treatment on arm muscle performance among swimmers with EP. The main outcomes were the time effects and group effects of interventions on muscle voluntary contraction (MVC). Sixty elite freestyle swimmers from Tianjin, China, voluntarily participated in the study and completed a 10-week intervention program. Swimmers with EP in the IT group showed a positive trend in MVC, with an approximately 2% increase, whereas the MVC of subjects in the R.I.C.E. treatment group and control group decreased by approximately 4% and 5%, respectively. In comparison, the effects of the IT intervention on the MVC of the triceps and brachioradialis muscles in swimmers with EP were significant (p = 0.042
The evolution of Internet technology has led to an increase in online users. This study focuses on the pivotal role of visual elements in web content conveyance and their impact on user browsing behavior. Therefore, the use of visual elements in web design based on big data has aroused widespread concern among web designers, they apply visual elements to their web design works to make the web more attractive. This study examines the composition and distribution characteristics of key visual elements identified through user behavior data in a big data environment and discusses the use of visual elements in web design in the era of network economy. In addition, this paper issued 200 questionnaires to investigate the degree of attention to visual elements in web pages for users of different occupations and different educational backgrounds. Our survey indicated that visual elements captured the attention of 41% of corporate employees, whereas a mere 1% of social welfare workers focused on web content; 36% of undergraduates pay attention to visual elements of web pages, but only 5% and 4% of postgraduates and doctoral degrees and above. Therefore, the visual elements of the designed web page need to conform to the user's cultural background and professional background.
Geo-polymer concrete has a significant influence on the environmental condition and thus its use in the civil industry leads to a decrease in carbon dioxide (CO2) emission. However, problems lie with its mixed design and casting in the field. This study utilizes supervised artificial-based machine learning algorithms (MLAs) to anticipate the mechanical characteristic of fly ash/slag-based geopolymer concrete (FASBGPC) by utilizing AdaBoost and Bagging on MLPNN to make an ensemble model with 156 data points. The data consist of GGBS (kg/m3), Alkaline activator (kg/m3), Fly ash (kg/m3), SP dosage (kg/m3), NaOH Molarity, Aggregate (kg/m3), Temperature (°C) and compressive strength as output parameter. Python programming is utilized in Anaconda Navigator using Spyder version 5.0 to predict the mechanical response. Statistical measures and validation of data are done by splitting the dataset into 80/20 percent and K-Fold CV is employed to check the accurateness of the model by using MAE, RMSE, and R2. Statistical analysis relies on errors, and tests against external indicators help determine how well models function in terms of robustness. The most important factor in compressive strength measurements is examined using permutation characteristics. The result reveals that ANN with AdaBoost is outclassed by giving maximum enhancement with R2 = 0.914 and shows the least error with statistical and external validations. Shapley analysis shows that GGBS, NaOH Molarity, and temperature are the most influential parameter that has significant content in making FASBGPC. Thus, ensemble methods are suitable for constructing prediction models because of their strong and reliable performance. Furthermore, the graphical user interface (GUI) is generated through the process of training a model that forecasts the desired outcome values when the corresponding inputs are provided. It streamlines the process and provides a useful tool for applying the model's abilities in the field of civil engineering.
This study is an attempt for comprehensive, combining experimental data with advanced analytical techniques and machine learning for a thorough understanding of the factors influencing the wear and cutting performance of multi-blade diamond disc cutters on granite blocks. A series of sawing experiments were performed to evaluate the wear and cutting performance of multi blade diamond disc cutters with varying diameters in the processing of large-sized granite blocks. The multi-layer diamond segments comprising the Iron (Fe) based metal matrix were brazed on the sawing blades. The segment's wear was studied through micrographs and data obtained from the Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersive X-ray (EDS). Granite rock samples of nine varieties were tested in the laboratory to determine the quantitative rock parameters. The contribution of individual rock parameters and their combined effects on wear and cutting performance of multi blade saw were correlated using statistical machine learning methods. Moreover, predictive models were developed to estimate the wear and cutting rate based on the most significant rock properties. The point load strength index, uniaxial compressive strength, and deformability, Cerchar abrasivity index, and Cerchar hardness index were found to be the significant variables affecting the sawing performance.
Dry gas pipelines can encounter various operational, technical, and environmental issues, such as corrosion, leaks, spills, restrictions, and cyber threats. To address these difficulties, proactive maintenance and management and a new technological strategy are needed to increase safety, reliability, and efficiency. A novel neural network model for forecasting the life of a dry gas pipeline system and detecting the metal loss dimension class that is exposed to a harsh environment is presented in this study to handle the missing data. The proposed strategy blends the strength of deep learning techniques with industry-specific expertise. The main advantage of this study is to predict the pipeline life with a significant advantage of predicting the dimension classification of metal loss simultaneously employing a Bayesian regularization-based neural network framework when there are missing inputs in the datasets. The proposed intelligent model, trained on four pipeline datasets of a dry gas pipeline system, can predict the health condition of pipelines with high accuracy, even if there are missing parameters in the dataset. The proposed model using neural network technology generated satisfactory results in terms of numerical performance, with MSE and R2 values closer to 0 and 1, respectively. A few cases with missing input data are carried out, and the missing data is forecasted for each case. Then, a model is developed to predict the life condition of pipelines with the predicted missing input variables. The findings reveal that the model has the potential for real-world applications in the oil and gas sector for estimating the health condition of pipelines, even if there are missing input parameters. Additionally, multi-model comparative analysis and sensitivity analysis are incorporated, offering an extensive comprehension of multi-model prediction abilities and beneficial insights into the impact of various input variables on model outputs, thereby improving the interpretability and reliability of our results. The proposed framework could help business plans by lowering the chance of severe accidents and environmental harm with better safety and reliability.
Parkinson's disease (PD) is a progressively debilitating neurodegenerative disorder that primarily affects the dopaminergic system in the basal ganglia, impacting millions of individuals globally. The clinical manifestations of the disease include resting tremors, muscle rigidity, bradykinesia, and postural instability. Diagnosis relies mainly on clinical evaluation, lacking reliable diagnostic tests and being inherently imprecise and subjective. Early detection of PD is crucial for initiating treatments that, while unable to cure the chronic condition, can enhance the life quality of patients and alleviate symptoms. This study explores the potential of utilizing long-short term memory neural networks (LSTM) with attention mechanisms to detect Parkinson's disease based on dual-task walking test data. Given that the performance of networks is significantly inductance by architecture and training parameter choices, a modified version of the recently introduced crayfish optimization algorithm (COA) is proposed, specifically tailored to the requirements of this investigation. The proposed optimizer is assessed on a publicly accessible real-world clinical gait in Parkinson's disease dataset, and the results demonstrate its promise, achieving an accuracy of 87.4187 % for the best-constructed models.
One of the direct and unavoidable consequences of global warming-induced rising temperatures is the more recurrent and severe heatwaves. In recent years, even countries like Malaysia seldom had some mild to severe heatwaves. As the Earth's average temperature continues to rise, heatwaves in Malaysia will undoubtedly worsen in the future. It is crucial to characterize and monitor heat events across time to effectively prepare for and implement preventative actions to lessen heatwave's social and economic effects. This study proposes heatwave-related indices that take into account both daily maximum (Tmax) and daily lowest (Tmin) temperatures to evaluate shifts in heatwave features in Peninsular Malaysia (PM). Daily ERA5 temperature dataset with a geographical resolution of 0.25° for the period 1950-2022 was used to analyze the changes in the frequency and severity of heat waves across PM, while the LandScan gridded population data from 2000 to 2020 was used to calculate the affected population to the heatwaves. This study also utilized Sen's slope for trend analysis of heatwave characteristics, which separates multi-decadal oscillatory fluctuations from secular trends. The findings demonstrated that the geographical pattern of heatwaves in PM could be reconstructed if daily Tmax is more than the 95th percentile for 3 or more days. The data indicated that the southwest was more prone to severe heatwaves. The PM experienced more heatwaves after 2000 than before. Overall, the heatwave-affected area in PM has increased by 8.98 km2/decade and its duration by 1.54 days/decade. The highest population affected was located in the central south region of PM. These findings provide valuable insights into the heatwaves pattern and impact.
Sepiolite is a silicate mineral that improves the fire properties in solid wood when mixed with a water-based coating. The present study was carried out to investigate and evaluate the effects of sepiolite addition to acrylic-latex paint on the pull-off adhesion strength, as an important characteristic of paints and finishes used in the modern furniture industry and historical furniture as well for preservation and restoration of heritage objects. Sepiolite was added at the rate of 10%, and brushed onto plain-sawn beech (Fagus orientalis L.) wood specimens, unimpregnated and impregnated with a 400 ppm silver nano-suspension, which were further thermally modified at 185 °C for 4 h. The results showed that thermal modification had a decreasing effect on the pull-off adhesion strength, primarily as a result of the thermal degradation of cell-wall polymers (mostly hemicelluloses). Still, a decreased wettability as a result of condensation and plasticization of lignin was also partially influential. Based on the obtained results,thermal modification was found to have a significant influence on pull-off adhesion strength. Sepiolite addition had a decreasing effectin all treatments, though the effect was not statistically significant in all treatments. The maximum and minimum decreases due to sepiolite addition were observed in the unimpregnated control (21%) and the thermally-modified NS-impregnated (4%) specimens. Other aspects of the sepiolite addition, and further studies that cover different types of paints and coatings, should be evaluated before coming to a final firm conclusion in this regard.
Horseshoe crabs are among the most studied invertebrates due to their unique, innate immune system and biological processes. The metabolomics study was conducted on lipopolysaccharide (LPS)-stimulated and non-stimulated hemocytes isolated from the Malaysian Tachypleus gigas and Carcinoscorpius rotundicauda. LC-TOF-MS, multivariate analyses, principal component analysis (PCA), and partial least squares-discriminant analysis (PLS-DA) were included in this study to profile the metabolites. A total of 37 metabolites were identified to be differentially abundant and were selected based on VIP > 1. However, of the 37 putative metabolites, only 23 were found to be significant with ANOVA at p
Malnutrition in patients is associated with reduced tolerance to treatment-related side effects and higher risks of complications, directly impacting patient prognosis. Consequently, a pressing requirement exists for the development of uncomplicated yet efficient screening methods to detect patients at heightened nutritional risk. The aim of this study was to formulate a concise nutritional risk prediction model for prompt assessment by oncology medical personnel, facilitating the effective identification of hepatocellular carcinoma patients at an elevated nutritional risk. Retrospective cohort data were collected from hepatocellular carcinoma patients who met the study's inclusion and exclusion criteria between March 2021 and April 2022. The patients were categorized into two groups: a normal nutrition group and a malnutrition group based on body composition assessments. Subsequently, the collected data were analyzed, and predictive models were constructed, followed by simplification. A total of 220 hepatocellular carcinoma patients were included in this study, and the final model incorporated four predictive factors: age, tumor diameter, TNM stage, and anemia. The area under the ROC curve for the short-term nutritional risk prediction model was 0.990 [95% CI (0.966-0.998)]. Further simplification of the scoring rule resulted in an area under the ROC curve of 0.986 [95% CI (0.961, 0.997)]. The developed model provides a rapid and efficient approach to assess the short-term nutritional risk of hepatocellular carcinoma patients. With easily accessible and swift indicators, the model can identify patients with potential nutritional risk more effectively and timely.
This research was conducted on industrial agriculture in Indonesia. Risk analysis was carried out based on previous research. One source of risk was obtained, namely raw materials that did not meet specifications, which was then proposed to be mitigated by evaluating supplier performance. This activity involves a lot of data, requiring efficient and effective data storage and access. The level in the simulation layout includes analysing system needs, using problem diagrams, compiling activity diagrams, deciding subprocesses, and filtering information. The analysis is carried out by comparing the use of supply chains with Blockchain and without Blockchain, which is then obtained to determine whether there is an increase. A sequentially stored data scenario describes a situation when the transaction process is in progress and is stored sequentially according to the process that occurs. Storing data in groups explains a problem when a transaction has been completed and stored in groups with similar data, making it easier to track specific data. In this regard, a simulation will be carried out using a website, namely a blockchain demo. The design stage starts with identifying system requirements, creating use case diagrams, compiling activity diagrams, determining subprocesses, and selecting information. The simulation results obtained will be analysed to determine the feasibility of Blockchain as a means of supporting risk mitigation related to data using aspects, including security, trust, traceability, sustainability, and costs.
Zebrafish have been utilized for many years as a model animal for pharmacological studies on diabetes and obesity. High-fat diet (HFD), streptozotocin and alloxan injection, and glucose immersion have all been used to induce diabetes and obesity in zebrafish. Currently, studies commonly used both male and female zebrafish, which may influence the outcomes since male and female zebrafish are biologically different. This study was designed to investigate the difference between the metabolites of male and female diabetic zebrafish, using limonene - a natural product which has shown several promising results in vitro and in vivo in treating diabetes and obesity-and provide new insights into how endogenous metabolites change following limonene treatment. Using HFD-fed male and female zebrafish, we were able to develop an animal model of T2D and identify several endogenous metabolites that might be used as diagnostic biomarkers for diabetes. The endogenous metabolites in males and females were different, even though both genders had high blood glucose levels and a high BMI. Treatment with limonene prevented high blood glucose levels and improved in diabesity zebrafish by limonene, through reversal of the metabolic changes caused by HFD in both genders. In addition, limonene was able to reverse the elevated expression of AKT during HFD.
Coastal wave storms pose a massive threat to over 10% of the world's population now inhabiting the low elevation coastal zone and to the trillions of $ worth of coastal zone infrastructure and developments therein. Using a ~ 40-year wave hindcast, we here present a world-first assessment of wind-wave storminess along the global coastline. Coastal regions are ranked in terms of the main storm characteristics, showing Northwestern Europe and Southwestern South America to suffer, on average, the most intense storms and the Yellow Sea coast and the South-African and Namibian coasts to be impacted by the most frequent storms. These characteristics are then combined to derive a holistic classification of the global coastlines in terms of their wave environment, showing, for example, that the open coasts of northwestern Europe are impacted by more than 10 storms per year with mean significant wave heights over 6 m. Finally, a novel metric to classify the degree of coastal wave storminess is presented, showing a general latitudinal storminess gradient. Iceland, Ireland, Scotland, Chile and Australia show the highest degree of storminess, whereas Indonesia, Papua-New Guinea, Malaysia, Cambodia and Myanmar show the lowest.
Composites are driving positive developments in the automobile sector. In this study investigated the use of composite fins in radiators using computational fluid dynamics (CFD) to analyze the fluid-flow phenomenon of nanoparticles and hydrogen gas. Our world is rapidly transforming, and new technologies are leading to positive revolutions in today's society. In this study successfully analyzed the entire thermal simulation processes of the radiator, as well as the composite fin arrangements with stress efficiency rates. The study examined the velocity path, pressure variations, and temperature distribution in the radiator setup. As found that nanoparticles and composite fins provide superior thermal heat rates and results. The combination of an aluminum radiator and composite fins in future models will support the control of cooling systems in automotive applications. The final investigation statement showed a 12% improvement with nanoparticles, where the velocity was 1.61 m/s and the radiator system's pressure volume was 2.44 MPa. In the fin condition, the stress rate was 3.60 N/mm2.