Image noise is a variation of uneven pixel values that occurs randomly. A good estimation of image noise parameters is crucial in image noise modeling, image denoising, and image quality assessment. To the best of our knowledge, there is no single estimator that can predict all noise parameters for multiple noise types. The first contribution of our research was to design a noise data feature extractor that can effectively extract noise information from the image pair. The second contribution of our work leveraged other noise parameter estimation algorithms that can only predict one type of noise. Our proposed method, DE-G, can estimate additive noise, multiplicative noise, and impulsive noise from single-source images accurately. We also show the capability of the proposed method in estimating multiple corruptions.
Fifth generation (5G) is a recent wireless communication technology in mobile networks. The key parameters of 5G are enhanced coverage, ultra reliable low latency, high data rates, massive connectivity and better support to mobility. Enhanced coverage is one of the major issues in the 5G and beyond 5G networks, which will be affecting the overall system performance and end user experience. The increasing number of base stations may increase the coverage but it leads to interference between the cell edge users, which in turn impacts the coverage. Therefore, enhanced coverage is one of the future challenging issues in cellular networks. In this survey, coverage enhancement techniques are explored to improve the overall system performance, throughput, coverage capacity, spectral efficiency, outage probability, data rates, and latency. The main aim of this article is to highlight the recent developments and deployments made towards the enhanced network coverage and to discuss its future research challenges.
Fifth-generation (5G) networks offer high-speed data transmission with low latency, increased base station volume, improved quality of service (QoS), and massive multiple-input-multiple-output (M-MIMO) channels compared to 4G long-term evolution (LTE) networks. However, the COVID-19 pandemic has disrupted the achievement of mobility and handover (HO) in 5G networks due to significant changes in intelligent devices and high-definition (HD) multimedia applications. Consequently, the current cellular network faces challenges in propagating high-capacity data with improved speed, QoS, latency, and efficient HO and mobility management. This comprehensive survey paper specifically focuses on HO and mobility management issues within 5G heterogeneous networks (HetNets). The paper thoroughly examines the existing literature and investigates key performance indicators (KPIs) and solutions for HO and mobility-related challenges while considering applied standards. Additionally, it evaluates the performance of current models in addressing HO and mobility management issues, taking into account factors such as energy efficiency, reliability, latency, and scalability. Finally, this paper identifies significant challenges associated with HO and mobility management in existing research models and provides detailed evaluations of their solutions along with recommendations for future research.
Although wireless sensor networks (WSNs) have been the object of research focus for the past two decades, fault diagnosis in these networks has received little attention. This is an essential requirement for wireless networks, especially in WSNs, because of their ad-hoc nature, deployment requirements and resource limitations. Therefore, in this paper we survey fault diagnosis from the perspective of network operations. To the best of our knowledge, this is the first survey from such a perspective. We survey the proactive, active and passive fault diagnosis schemes that have appeared in the literature to date, accenting their advantages and limitations of each scheme. In addition to illuminating the details of past efforts, this survey also reveals new research challenges and strengthens our understanding of the field of fault diagnosis.
The domain of underwater wireless sensor networks (UWSNs) had received a lot of attention recently due to its significant advanced capabilities in the ocean surveillance, marine monitoring and application deployment for detecting underwater targets. However, the literature have not compiled the state-of-the-art along its direction to discover the recent advancements which were fuelled by the underwater sensor technologies. Hence, this paper offers the newest analysis on the available evidences by reviewing studies in the past five years on various aspects that support network activities and applications in UWSN environments. This work was motivated by the need for robust and flexible solutions that can satisfy the requirements for the rapid development of the underwater wireless sensor networks. This paper identifies the key requirements for achieving essential services as well as common platforms for UWSN. It also contributes a taxonomy of the critical elements in UWSNs by devising a classification on architectural elements, communications, routing protocol and standards, security, and applications of UWSNs. Finally, the major challenges that remain open are presented as a guide for future research directions.
Industrialization has led to a huge demand for a network control system to monitor and control multi-loop processes with high effectiveness. Due to these advancements, new industrial wireless sensor network (IWSN) standards such as ZigBee, WirelessHART, ISA 100.11a wireless, and Wireless network for Industrial Automation-Process Automation (WIA-PA) have begun to emerge based on their wired conventional structure with additional developments. This advancement improved flexibility, scalability, needed fewer cables, reduced the network installation and commissioning time, increased productivity, and reduced maintenance costs compared to wired networks. On the other hand, using IWSNs for process control comes with the critical challenge of handling stochastic network delays, packet drop, and external noises which are capable of degrading the controller performance. Thus, this paper presents a detailed study focusing only on the adoption of WirelessHART in simulations and real-time applications for industrial process monitoring and control with its crucial challenges and design requirements.
Gait analysis is a systematic study of human locomotion, which can be utilized in variousapplications, such as rehabilitation, clinical diagnostics and sports activities. The various limitationssuch as cost, non-portability, long setup time, post-processing time etc., of the current gait analysistechniques have made them unfeasible for individual use. This led to an increase in research interestin developing smart insoles where wearable sensors can be employed to detect vertical groundreaction forces (vGRF) and other gait variables. Smart insoles are flexible, portable and comfortablefor gait analysis, and can monitor plantar pressure frequently through embedded sensors thatconvert the applied pressure to an electrical signal that can be displayed and analyzed further.Several research teams are still working to improve the insoles' features such as size, sensitivity ofinsoles sensors, durability, and the intelligence of insoles to monitor and control subjects' gait bydetecting various complications providing recommendation to enhance walking performance. Eventhough systematic sensor calibration approaches have been followed by different teams to calibrateinsoles' sensor, expensive calibration devices were used for calibration such as universal testingmachines or infrared motion capture cameras equipped in motion analysis labs. This paper providesa systematic design and characterization procedure for three different pressure sensors: forcesensitiveresistors (FSRs), ceramic piezoelectric sensors, and flexible piezoelectric sensors that canbe used for detecting vGRF using a smart insole. A simple calibration method based on a load cellis presented as an alternative to the expensive calibration techniques. In addition, to evaluate theperformance of the different sensors as a component for the smart insole, the acquired vGRF fromdifferent insoles were used to compare them. The results showed that the FSR is the most effectivesensor among the three sensors for smart insole applications, whereas the piezoelectric sensors canbe utilized in detecting the start and end of the gait cycle. This study will be useful for any researchgroup in replicating the design of a customized smart insole for gait analysis.
In the last three decades, smart materials have become popular. The piezoelectric materials have shown key characteristics for engineering applications, such as in sensors and actuators for industrial use. Because of their excellent mechanical-to-electrical and vice versa energy conversion properties, piezoelectric materials with high piezoelectric charge and voltage coefficient have been tested in renewable energy applications. The fundamental component of the energy harvester is the piezoelectric material, which, when subjected to mechanical vibrations or applied stress, induces the displaced ions in the material and results in a net electric charge due to the dipole moment of the unit cell. This phenomenon builds an electric potential across the material. In this review article, a detailed study focused on the piezoelectric energy harvesters (PEH's) is reported. In addition, the fundamental idea about piezoelectric materials, along with their modeling for various applications, are detailed systematically. Then a summary of previous studies based on PEH's other applications is listed, considering the technical aspects and methodologies. A discussion has been provided as a critical review of current challenges in this field. As a result, this review can provide a guideline for the scholars who want to use PEH's for their research.
This research aimed to optimize the camera calibration process by identifying the optimal distance and angle for capturing checkered board images, with a specific focus on understanding the factors that influence the reprojection error (ϵRP). The objective was to improve calibration efficiency by exploring the impacts of distance and orientation factors and the feasibility of independently manipulating these factors. The study employed Zhang's camera calibration method, along with the 2k full-factorial analysis method and the Latin Hypercube Sampling (LHS) method, to identify the optimal calibration parameters. Three calibration methods were devised: calibration with distance factors (D, H, V), orientation factors (R, P, Y), and the combined two influential factors from both sets of factors. The calibration study was carried out with three different stereo cameras. The results indicate that D is the most influential factor, while H and V are nearly equally influential for method A; P and R are the two most influential orientation factors for method B. Compared to Zhang's method alone, on average, methods A, B, and C reduce ϵRP by 25%, 24%, and 34%, respectively. However, method C requires about 10% more calibration images than methods A and B combined. For applications where lower value of ϵRP is required, method C is recommended. This study provides valuable insights into the factors affecting ϵRP in calibration processes. The proposed methods can be used to improve the calibration accuracy for stereo cameras for the applications in object detection and ranging. The findings expand our understanding of camera calibration, particularly the influence of distance and orientation factors, making significant contributions to camera calibration procedures.
Electrical energy is often wasted through human negligence when people do not switch off electrical appliances such as lighting after leaving a place. Such a scenario often happens in a classroom when the last person leaves the class and forgets to switch off the electrical appliances. Such wastage may not be able to be afforded by schools that are limited financially. Therefore, this research proposed a simple and cost-effective system that can analyze whether there is or is not a human presence in the classroom by applying a counter to count the total number of people entering and leaving the classroom based on the sensing signals of a set of dual PIR sensors only and then correlating this to automatically turn on or off the electrical appliances mentioned. The total number of people identified in the classroom is also displayed on an LCD screen. A TRIZ approach is used to support the ideation of the system. The system can switch on several electrical output loads simultaneously when the presence of people is detected and switch them off when there are no people in the classroom. The proposed system can be expanded to be used in homes, offices, and buildings to prevent the high cost of electricity consumption caused by the negligence of people. This enables smarter control of electricity consumption.
Microbial fuel cells represent an innovative technology which allow simultaneous waste treatment, electricity production, and environmental monitoring. This study provides a preliminary investigation of the use of terrestrial Single chamber Microbial Fuel Cells (SMFCs) as biosensors. Three cells were created using Andean soil, each one for monitoring a BOD concentration of synthetic washed rice wastewater (SRWW) of 10, 100, and 200 mg/L for SMFC1, SMFC2 and SMFC3, respectively. The results showed transient, exponential, and steady stages in the SMFCs. The maximum open circuit voltage (OCV) peaks were reached during the elapsed time of the transient stages, according to the tested BOD concentrations. A good linearity between OCV and time was observed in the increasing stage. The average OCV in this stage increased independently of the tested concentrations. SMFC1 required less time than SMFC2 to reach the steady stage, suggesting the BOD concentration is an influencing factor in SMFCs, and SMFC3 did not reach it. The OCV ratios were between 40.6-58.8 mV and 18.2-32.9 mV for SMFC1 and SMFC2. The reproducibility of the SMFCs was observed in four and three cycles for SMFC1 and SMFC2, respectively. The presented SMFCs had a good response and reproducibility as biosensor devices, and could be an alternative for environmental monitoring.
Blockchain has become a well-known, secured, decentralized datastore in many domains, including medical, industrial, and especially the financial field. However, to meet the requirements of different fields, platforms that are built on blockchain technology must provide functions and characteristics with a wide variety of options. Although they may share similar technology at the fundamental level, the differences among them make data or transaction exchange challenging. Cross-chain transactions have become a commonly utilized function, while at the same time, some have pointed out its security loopholes. It is evident that a secure transaction scheme is desperately needed. However, what about those nodes that do not behave? It is clear that not only a secure transaction scheme is necessary, but also a system that can gradually eliminate malicious players is of dire need. At the same time, integrating different blockchain systems can be difficult due to their independent architectures, and cross-chain transactions can be at risk if malicious attackers try to control the nodes in the cross-chain system. In this paper, we propose a dynamic reputation management scheme based on the past transaction behaviors of nodes. These behaviors serve as the basis for evaluating a node's reputation to support the decision on malicious behavior and enable the system to intercept it in a timely manner. Furthermore, to establish a reputation index with high precision and flexibility, we integrate Particle Swarm Optimization (PSO) into our proposed scheme. This allows our system to meet the needs of a wide variety of blockchain platforms. Overall, the article highlights the importance of securing cross-chain transactions and proposes a method to prevent misbehavior by evaluating and managing node reputation.
An optical urea biosensor was fabricated by stacking several layers of sol-gelfilms. The stacking of the sol-gel films allowed the immobilization of a Nile Bluechromoionophore (ETH 5294) and urease enzyme separately without the need of anychemical attachment procedure. The absorbance response of the biosensor was monitoredat 550 nm, i.e. the deprotonation of the chromoionophore. This multi-layer sol-gel filmformat enabled higher enzyme loading in the biosensor to be achieved. The urea opticalbiosensor constructed from three layers of sol-gel films that contained urease demonstrateda much wider linear response range of up to 100 mM urea when compared with biosensorsthat constructed from 1-2 layers of films. Analysis of urea in urine samples with thisoptical urea biosensor yielded results similar to that determined by a spectrophotometricmethod using the reagent p-dimethylaminobenzaldehyde (R² = 0.982, n = 6). The averagerecovery of urea from urine samples using this urea biosensor is approximately 103%.
Automatic vehicle license plate recognition is an essential part of intelligent vehicle access control and monitoring systems. With the increasing number of vehicles, it is important that an effective real-time system for automated license plate recognition is developed. Computer vision techniques are typically used for this task. However, it remains a challenging problem, as both high accuracy and low processing time are required in such a system. Here, we propose a method for license plate recognition that seeks to find a balance between these two requirements. The proposed method consists of two stages: detection and recognition. In the detection stage, the image is processed so that a region of interest is identified. In the recognition stage, features are extracted from the region of interest using the histogram of oriented gradients method. These features are then used to train an artificial neural network to identify characters in the license plate. Experimental results show that the proposed method achieves a high level of accuracy as well as low processing time when compared to existing methods, indicating that it is suitable for real-time applications.
In this paper, we propose two soft computing localization techniques for wireless sensor networks (WSNs). The two techniques, Neural Fuzzy Inference System (ANFIS) and Artificial Neural Network (ANN), focus on a range-based localization method which relies on the measurement of the received signal strength indicator (RSSI) from the three ZigBee anchor nodes distributed throughout the track cycling field. The soft computing techniques aim to estimate the distance between bicycles moving on the cycle track for outdoor and indoor velodromes. In the first approach the ANFIS was considered, whereas in the second approach the ANN was hybridized individually with three optimization algorithms, namely Particle Swarm Optimization (PSO), Gravitational Search Algorithm (GSA), and Backtracking Search Algorithm (BSA). The results revealed that the hybrid GSA-ANN outperforms the other methods adopted in this paper in terms of accuracy localization and distance estimation accuracy. The hybrid GSA-ANN achieves a mean absolute distance estimation error of 0.02 m and 0.2 m for outdoor and indoor velodromes, respectively.
Herbal-based products are becoming a widespread production trend among manufacturers for the domestic and international markets. As the production increases to meet the market demand, it is very crucial for the manufacturer to ensure that their products have met specific criteria and fulfil the intended quality determined by the quality controller. One famous herbal-based product is herbal tea. This paper investigates bio-inspired flavour assessments in a data fusion framework involving an e-nose and e-tongue. The objectives are to attain good classification of different types and brands of herbal tea, classification of different flavour masking effects and finally classification of different concentrations of herbal tea. Two data fusion levels were employed in this research, low level data fusion and intermediate level data fusion. Four classification approaches; LDA, SVM, KNN and PNN were examined in search of the best classifier to achieve the research objectives. In order to evaluate the classifiers' performance, an error estimator based on k-fold cross validation and leave-one-out were applied. Classification based on GC-MS TIC data was also included as a comparison to the classification performance using fusion approaches. Generally, KNN outperformed the other classification techniques for the three flavour assessments in the low level data fusion and intermediate level data fusion. However, the classification results based on GC-MS TIC data are varied.
The major compounds in honey are carbohydrates such as monosaccharides and disaccharides. The same compounds are found in cane-sugar concentrates. Unfortunately when sugar concentrate is added to honey, laboratory assessments are found to be ineffective in detecting this adulteration. Unlike tracing heavy metals in honey, sugar adulterated honey is much trickier and harder to detect, and traditionally it has been very challenging to come up with a suitable method to prove the presence of adulterants in honey products. This paper proposes a combination of array sensing and multi-modality sensor fusion that can effectively discriminate the samples not only based on the compounds present in the sample but also mimic the way humans perceive flavours and aromas. Conversely, analytical instruments are based on chemical separations which may alter the properties of the volatiles or flavours of a particular honey. The present work is focused on classifying 18 samples of different honeys, sugar syrups and adulterated samples using data fusion of electronic nose (e-nose) and electronic tongue (e-tongue) measurements. Each group of samples was evaluated separately by the e-nose and e-tongue. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were able to separately discriminate monofloral honey from sugar syrup, and polyfloral honey from sugar and adulterated samples using the e-nose and e-tongue. The e-nose was observed to give better separation compared to e-tongue assessment, particularly when LDA was applied. However, when all samples were combined in one classification analysis, neither PCA nor LDA were able to discriminate between honeys of different floral origins, sugar syrup and adulterated samples. By applying a sensor fusion technique, the classification for the 18 different samples was improved. Significant improvement was observed using PCA, while LDA not only improved the discrimination but also gave better classification. An improvement in performance was also observed using a Probabilistic Neural Network classifier when the e-nose and e-tongue data were fused.
New acrylic microspheres were synthesised by photopolymerisation where the succinimide functional group was incorporated during the microsphere preparation. An optical biosensor for urea based on reflectance transduction with a large linear response range to urea was successfully developed using this material. The biosensor utilized succinimide-modified acrylic microspheres immobilized with a Nile blue chromoionophore (ETH 5294) for optical detection and urease enzyme was immobilized on the surface of the microspheres via the succinimide groups. No leaching of the enzyme or chromoionophore was observed. Hydrolysis of the urea by urease changes the pH and leads to a color change of the immobilized chromoionophore. When the color change was monitored by reflectance spectrophotometry, the linear response range of the biosensor to urea was from 0.01 to 1,000 mM (R2 = 0.97) with a limit of detection of 9.97 μM. The biosensor response showed good reproducibility (relative standard deviation = 1.43%, n = 5) with no interference by major cations such as Na+, K+, NH4+ and Mg2+. The use of reflectance as a transduction method led to a large linear response range that is better than that of many urea biosensors based on other optical transduction methods.
Recently sink mobility has been exploited in numerous schemes to prolong the lifetime of wireless sensor networks (WSNs). Contrary to traditional WSNs where sensory data from sensor field is ultimately sent to a static sink, mobile sink-based approaches alleviate energy-holes issues thereby facilitating balanced energy consumption among nodes. In mobility scenarios, nodes need to keep track of the latest location of mobile sinks for data delivery. However, frequent propagation of sink topological updates undermines the energy conservation goal and therefore should be controlled. Furthermore, controlled propagation of sinks' topological updates affects the performance of routing strategies thereby increasing data delivery latency and reducing packet delivery ratios. This paper presents a taxonomy of various data collection/dissemination schemes that exploit sink mobility. Based on how sink mobility is exploited in the sensor field, we classify existing schemes into three classes, namely path constrained, path unconstrained, and controlled sink mobility-based schemes. We also organize existing schemes based on their primary goals and provide a comparative study to aid readers in selecting the appropriate scheme in accordance with their particular intended applications and network dynamics. Finally, we conclude our discussion with the identification of some unresolved issues in pursuit of data delivery to a mobile sink.
Homocysteine and methylmalonic acid are important biomarkers for diseases associated with an impaired central nervous system (CNS). A new chemoassay utilizing coumarin-based fluorescent probe 1 to detect the levels of homocysteine is successfully implemented using Parkinson's disease (PD) patients' blood serum. In addition, a rapid identification of homocysteine and methylmalonic acid levels in blood serum of PD patients was also performed using the liquid chromatography-mass spectrometry (LC-MS). The results obtained from both analyses were in agreement. The new chemoassay utilizing coumarin-based fluorescent probe 1 offers a cost- and time-effective method to identify the biomarkers in CNS patients.