Biomass co-firing with coal can be adopted in the electricity sector to promote greenhouse gas reduction, renewable energy production, and resource efficiency improvement toward environmental sustainability. This realization, however, requires effective management of supply chain issues, such as the collection of biomass feedstock, the transportation of biomass, and the localization of biomass processing plants to deliver the co-firing scales needed. This work addresses these issues by providing a techno-economic assessment conducted in a spatially-explicit manner to investigate the opportunity for scaling up the co-firing deployment at the national scale. The modeling approach is applied to the case of Malaysia's coal and palm oil biomass industries. The number of cases involving the impact of energy decarbonization targets, economic policy instrument, and supply chain cost parameter variations on the co-firing scales deployed are assessed. The findings show that densified biomass feedstock can substitute significant shares of coal capacities to deliver up to 29 MtCO2/year of carbon dioxide reduction. Nevertheless, this would cause a surge in the electricity system cost by up to 2 billion USD/year due to the substitution of up to 40% of the coal plant capacities. In facilitating the maximal deployment of co-firing at the national scale, more than 100 solid biofuel production plants would need to be built to support a maximum of 41 TWh/year of co-firing capacity. Actions to minimize the specific cost elements of the biomass co-firing supply chain are thus needed in the near term to increase the effectiveness of economic policy instrument to promote co-firing and reduce environmental emissions.
Oil palm trunks (OPT) are logged for replantation and the fiber residues are disposed of into the palm plantation area. The fiber residues are expected to increase soil fertility through recycling of carbon and minerals via fiber decomposition. This study investigated the effects of OPT fiber disposal and other lignocellulosic biomass on plant growth and microbial diversity in the soil environment. Four treatment plots were tested: (A) soil+OPT fiber (1:20), (B) soil+sugarcane bagasse (1:20), (C) soil+cellulose powder (1:20), and (D) unamended soil as a negative control. Low plant height, decreased chlorophyll content, and low biomass was observed in corn grown on soil mixed with OPT fiber, cellulose, and sugarcane bagasse, when compared with those of the control. The plants grown with OPT fiber were deficient in total nitrogen and magnesium when compared with those without fiber amendment, which suggested that nitrogen and minerals in soil might be taken up by changing microflora because of the OPT fibers presence. To confirm differences in the soil microflora, metagenomics analysis was performed on untreated soil and soil from each lignocellulose treatment. The microflora of soils mixed with OPT fiber, cellulose and sugarcane bagasse revealed substantial increases in bacteria such as families Cytophagaceae and Oscillospiraceae, and two major fungal genera, Trichoderma and Trichocladium, that are involved in lignocellulose degradation. OPT fiber resulted in a drastic increase in the ratios and amounts of Trichocladium in the soil when compared with those of cellulose and sugarcane bagasse. These results indicate that unregulated disposal of OPT fiber into plantation areas could result in nutrient loss from soil by increasing the abundance of microorganisms involved in lignocellulose decomposition.
Compost leachate (CL) is often treated as sewage. Limited studies have characterised the use of CL for agriculture application due to the variation of nutrient range, potential pollutants and need for pretreatment before use. This paper reviewed the characteristics of CL in terms of its nutrients and physical characteristics from three types of biowastes, i.e. the organic portion of municipal solid waste (OP-MSW), animal manure and green waste. The nutrient range characterised are used to develop the dilution rate of the CL as fertigation water for three types of vegetables. The dilution rate of CL developed is based on the fertigation standards set by the Food and Agriculture Organization of the United Nations and Malaysia Standards. The results show that all CL contain high organic content and micronutrients, which exceeded the upper limits. For the fertigation of vegetables using the CL, based on the requirement of COD and micronutrients (Fe, Mn, Zn, Cu, Pb, Ni, Cd, Cr) of the vegetables, the CL from green waste required the lowest dilution rate (8-45 fold), followed by animal waste (33-65 fold) and the OP-MSW (193-1770 fold). The novel dilution range developed is vital to balance the essential nutrients in the CL while avoiding phototoxicity on plant and soil pollution. The dilution strategy developed is essential to support the conversion of CL as an organic liquid fertiliser for agricultural application.
High nutrient loading in aquatic environment has become the main causative of harmful algae blooms (HABs) in water resources particularly pond, lake and river. HABs are mostly dominated by microalgae derived from the group of blue-green algae which are capable of releasing harmful toxins. Therefore, this study aims to investigate the inhibitory effects of thiourea derivatives on the growth of such blue-green algae. Thiourea derivatives have been proven to exhibit antifungal and antibacterial effects. However, there is still limited study had been conducted on the effect of thiourea derivatives toward blue-green algae species in recent years. In this research, a species of blue-green algae from Kenyir Lake, Terengganu, Malaysia was successfully isolated using morphological characters and molecularly identified as Synechoccus elongatus. Four new thiourea derivative compounds were also successfully synthesised. The compounds were designed with variation on different R-substitution group and characterised using Nuclear Magnetic Resonance (NMR) to confirm their molecular structure. Those compounds were characterised as 1-Benzyl-3-(3,5-dimethoxy-benzoyl)-thiourea (C1), 1-(3-Chloro-benzyl)-3-(3,5-dimethoxy-benzoyl)-thiourea (C2), 1-(3,5-Dimethoxy-benzoyl)-3-(3-methyl-benzyl)-thiourea (C3) and 1-(3,5-Dimethoxy-benzoyl)-3-(3-trifluoromethyl-benzyl)-thiourea (C4). For the inhibition assessment,S. elongatus were treated with C1-C4 for 5 day at concentration of 2, 5, 10 and 20 μg/ml, respectively. C3 compound showed the highest inhibition percentage with 98% of inhibition after 5 days treatment. By using Bradford method, protein extraction of S. elongatus was conducted at the highest inhibition percentage. Protein concentration of treated species was observed with 3.28 μg/ml as compared to protein concentration of control with 6.48 μg/ml. This result indicated the reduction of protein content after the treatment. Protein band pattern was identified intensed after the treatment SDS PAGE was carried out. The thiourea derivatives compound proved to have successfully inhibited the growth of blue-green algae. Hence, further study should be carried out to ensure the compound can be practically utilized in the pond and in natural environment.
This study highlights the potential of pyrolysis of food waste (FW) with Ni-based catalysts under CO2 atmosphere as an environmentally benign disposal technique. FW was pyrolyzed with homo-type Ni/Al2O3 (Ni-HO) or eggshell-type Ni/Al2O3 (Ni-EG) catalysts under flowing CO2 (50 mL/min) at temperatures from 500 to 700 °C for 1 h. A higher gas yield (42.05 wt%) and a lower condensable yield (36.28 wt%) were achieved for catalytic pyrolysis with Ni-EG than with Ni-HO (34.94 wt% and 40.06 wt%, respectively). In particular, the maximum volumetric content of H2 (21.48%) and CO (28.43%) and the lowest content of C2-C4 (19.22%) were obtained using the Ni-EG. The formation of cyclic species (e.g., benzene derivatives) in bio-oil was also effectively suppressed (24.87%) when the Ni-EG catalyst and CO2 medium were concurrently utilized for the FW pyrolysis. Accordingly, the simultaneous use of the Ni-EG catalyst and CO2 contributed to altering the carbon distribution of the pyrolytic products from condensable species to value-added gaseous products by facilitating ring-opening reactions and free radical mechanisms. This study should suggest that CO2-assisted catalytic pyrolysis over the Ni-EG catalyst would be an eco-friendly and sustainable strategy for disposal of FW which also provides a clean and high-quality source of energy.
This study examined the impact of worldwide governance indicators on the sustainability of the bioenergy industry in selected European countries for the period 1996-2018. Applying the Fixed Effect (FE) Model, the results reveal that the bioenergy industry can significantly grow by improving the quality of worldwide governance indicators in European countries, especially in Western European Countries (WEC). Government effectiveness, rule of law, regulatory quality, and voice and accountability are found to be increasing the growth of the bioenergy industry. Precisely, the results further show that the magnitude of the effect of government effectiveness, voice and accountability, and Gross Domestic Product (GDP) on bioenergy output is higher in Western European Countries (WEC) as compared to the Central and Eastern European Countries (CEEC). Also, the findings further elaborate that the significant positive impact of regulatory quality and rule of law on bioenergy output is higher in CEEC countries compared to the WEC countries. The finding implies that the growth of the bioenergy industry in European countries can be effectively increased by improving the practice and quality of worldwide governance indicators. The study recommends for European countries to increase the efficiency of worldwide governance in their bioenergy industry to increase the sustainability of bioenergy production and reduce Dioxide Carbon (CO2) emissions. Policymakers in these countries should also invest more in worldwide governance to increase its effectiveness and transparency in the bioenergy industry. The authorities should equally emphasize the effectiveness and transparency of worldwide governance indicators to attain bioenergy security and lessen the dependence on fossil fuels.
To ensure the safe discharge of treated wastewater to the environment, continuous efforts are vital to enhance the modelling accuracy of wastewater treatment plants (WWTPs) through utilizing state-of-art techniques and algorithms. The integration of metaheuristic modern optimization algorithms that are natlurally inspired with the Fussy Inference Systems (FIS) to improve the modelling performance is a promising and mathematically suitable approach. This study integrates four population-based algorithms, namely: Particle swarm optimization (PSO), Genetic algorithm (GA), Hybrid GA-PSO, and Mutating invasive weed optimization (M-IWO) with FIS system. A full-scale WWTP in South Africa (SA) was selected to assess the validity of the proposed algorithms, where six wastewater effluent parameters were modeled, i.e., Alkalinity (ALK), Sulphate (SLP), Phosphate (PHS), Total Kjeldahl Nitrogen (TKN), Total Suspended Solids (TSS), and Chemical Oxygen Demand (COD). The results from this study showed that the hybrid PSO-GA algorithm outperforms the PSO and GA algorithms when used individually, in modelling all wastewater effluent parameters. PSO performed better for SLP and TKN compared to GA, while the M-IWO algorithm failed to provide an acceptable modelling convergence for all the studied parameters. However, three out of four algorithms applied in this study proven beneficial to be optimized in enhancing the modelling accuracy of wastewater quality parameters.
Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polyester which are biosynthesized from the intracellular cells of microalgae through the cultivation of organic food waste medium. Before cultivation process, food waste must undergo several pre-treatment techniques such as chemical, biological, physical or mechanical in order to solubilize complex food waste matter into simpler micro- and macronutrients in which allow bio-valorisation of microalgae and food waste compound during the cultivation process. This work reviews four microalgae genera namely Chlamydomonas, Chlorella, Spirulina, and Botryococcus, are selected as suitable species due to rapid growth rate, minimal nutrient requirement, greater adaptability and flexibility prior to lower the overall production cost and maximized the production of PHAs. This study also focuses on the different mode of cultivation for the accumulation of PHAs followed by cell wall destabilization, extraction, and purification. Nonetheless, this review provides future insights into enhancing the productivity of bioplastic derived from microalgae towards low-cost, large-scale, and higher productivity of PHAs.
Eco-industrial parks promise to reduce environmental and social impacts and improve the economic performance of industrial parks. However, the transition from industrial parks to eco-industrial parks is still not well understood. This study contributes to developing valid hierarchical eco-industrial park transition attribute sets with qualitative information, as prior studies lack an exploration of the attributes in the transition of eco-industrial parks in Hungary. In nature, eco-industrial park transition attributes have causal and hierarchical interrelationships and are described with qualitative information. The assessment involves an analysis of the industrial symbiosis principles by using linguistic preferences. However, multiple attributes are involved in the assessment; therefore, this study proposes the Delphi method to develop a valid attribute set and applies fuzzy set theory to translate qualitative information into crisp values. The fuzzy decision-making trial evaluation laboratory method is used to visualize the attributes' causal interrelationships under uncertainties. The results indicate that the policy and regulatory framework leads to collaboration among firms in the eco-industrial park transition model. In practice, price reforms, management commitment, strategic planning, cognitive barriers and the integration of external information are the practical criteria for improvement. Theoretical and practical implications are also discussed.
Striving to achieve the Sustainable Development Goals (SDGs), countries are increasingly embracing a sustainable financing mechanism via green bond financing. Green bonds have attracted the attention of the industrial sector and policymakers, however, the impact of green bond financing on environmental and social sustainability has not been confirmed. There is no empirical evidence on how this financial product can contribute to achieving the goals set out in Agenda 2030. In this study, we empirically analyze the impact of green bond financing on environmental and social sustainability by considering the S&P 500 Global Green Bond Index and S&P 500 Environmental and Social Responsibility Index, from October 1, 2010 to 31st July 2020 using a combination of Quantile-on-Quantile Regression and Wavelet Multiscale Decomposition approaches. Our results reveal that green financing mechanisms might have gradual negative transformational impacts on environmental and social responsibility. Furthermore, we attempt to design a policy framework to address the relevant SDG objectives.
The vast amount of oily wastewater released to the environment through industrialization has worsened the water quality in recent years, posing adverse impacts on general human health. Oil emulsified in water is one of the most difficult mixtures to be treated, making it imperative for new technology to be explored to address this issue. The use of conventional water treatment such as flotation, coagulation, precipitation, adsorption, and chemical treatment have low separation efficiencies and high energy costs, and are not applicable to the separation of oil/water emulsions. Therefore, there is a demand for more efficient methods and materials for the separations of immiscible oil/water mixtures and emulsions. Superwetting materials that can repel oil, while letting water pass through have been widely explored to fit into this concern. These materials usually make use of simultaneous hydrophilic/oleophobic mechanisms to allow a solid surface to separate oily emulsion with little to no use of energy. Also, by integrating specific wettability concepts with appropriate pore scale, solid surfaces may achieve separation of multifarious oil/water mixtures namely immiscible oil/water blends and consolidated emulsions. In this review, materials used to impart superwetting in solid surfaces by focusing on superhydrophilic/superoleophobic wetting properties of the materials categorized into fluorinated and non-fluorinated surface modification are summarized. In each material, its background, mechanism, fabricating processes, and their effects on solid surface's wetting capability are elaborated in detail. The materials reviewed in this paper are mainly organic and green, suggesting the alternative material to replace the fluorine group that is widely used to achieve oleophobicity in oily wastewater treatment.
The SARS-CoV-2 virus has spread globally and has severely impacted public health and the economy. Hand hygiene, social distancing, and the usage of personal protective equipment are considered the most vital tools in controlling the primary transmission of the virus. Converging evidence indicated the presence of SARS-CoV-2 in wastewater and its persistence over several days, which may create secondary transmission of the virus via waterborne and wastewater pathways. Although, researchers have started focusing on this mode of virus transmission, limited knowledge and societal unawareness of the transmission through wastewater may lead to significant increases in the number of positive cases. To emphasize the severe issue of virus transmission through wastewater and create societal awareness, we present a state of the art critical review on transmission of SARS-CoV-2 in wastewater and the potential remedial strategies to effectively control the viral spread and safeguard society. For low-income countries with high population densities, it is suggested to identify the virus in large scale municipal wastewater plants before following up with one-to-one testing for effective control of the secondary transmission. Ultrafiltration is an effective method for wastewater treatment and usually more than 4 logs of virus removal are achieved while safeguarding good protein permeability. Decentralized wastewater treatment facilities using solar-assisted disinfestation methods are most economical and can be effectively used in hospitals, isolation wards, and medical centers for reducing the risk of transmission from high local concentration sites, especially in tropical countries with abundant solar energy. Disinfection with chlorine, sodium hypochlorite, benzalkonium chloride, and peracetic acid have shown potential in terms of virucidal properties. Biological wastewater treatment using micro-algae will be highly effective in removal of virus and can be incorporated into membrane bio-reaction to achieve excellent virus removal rate. Though promising results have been shown by initial research for inactivation of SARS-CoV-2 in wastewater using physical, chemical and biological based treatment methods, there is a pressing need for extensive investigation of COVID-19 specific disinfectants with appropriate concentrations, their environmental implications, and regular monitoring of transmission. Effective wastewater treatment methods with high virus removal capacity and low treatment costs should be selected to control the virus spread and safeguard society from this deadly virus.
A continuous increase in the amount of greenhouse gases (GHGs) is causing serious threats to the environment and life on the earth, and CO2 is one of the major candidates. Reducing the excess CO2 by converting into industrial products could be beneficial for the environment and also boost up industrial growth. In particular, the conversion of CO2 into methanol is very beneficial as it is cheaper to produce from biomass, less inflammable, and advantageous to many industries. Application of various plants, algae, and microbial enzymes to recycle the CO2 and using these enzymes separately along with CO2-phillic materials and chemicals can be a sustainable solution to reduce the global carbon footprint. Materials such as MOFs, porphyrins, and nanomaterials are also used widely for CO2 absorption and conversion into methanol. Thus, a combination of enzymes and materials which convert the CO2 into methanol could energize the CO2 utilization. The CO2 to methanol conversion utilizes carbon better than the conventional syngas and the reaction yields fewer by-products. The methanol produced can further be utilized as a clean-burning fuel, in pharmaceuticals, automobiles and as a general solvent in various industries etc. This makes methanol an ideal fuel in comparison to the conventional petroleum-based ones and it is advantageous for a safer and cleaner environment. In this review article, various aspects of the circular economy with the present scenario of environmental crisis will also be considered for large-scale sustainable biorefinery of methanol production from atmospheric CO2.
Climate extremes have a significant impact on vegetation. However, little is known about vegetation response to climatic extremes in Bangladesh. The association of Normalized Difference Vegetation Index (NDVI) with nine extreme precipitation and temperature indices was evaluated to identify the nexus between vegetation and climatic extremes and their associations in Bangladesh for the period 1986-2017. Moreover, detrended fluctuation analysis (DFA) and Morlet wavelet analysis (MWA) were employed to evaluate the possible future trends and decipher the existing periodic cycles, respectively in the time series of NDVI and climate extremes. Besides, atmospheric variables of ECMWF ERA5 were used to examine the casual circulation mechanism responsible for climatic extremes of Bangladesh. The results revealed that the monthly NDVI is positively associated with extreme rainfall with spatiotemporal heterogeneity. Warm temperature indices showed a significant negative association with NDVI on the seasonal scale, while precipitation and cold temperature extremes showed a positive association with yearly NDVI. The DEA revealed a continuous increase in temperature extreme in the future, while no change in precipitation extremes. NDVI also revealed a significant association with extreme temperature indices with a time lag of one month and with precipitation extreme without time lag. Spatial analysis indicated insensitivity of marshy vegetation type to climate extremes in winter. The study revealed that elevated summer geopotential height, no visible anticyclonic center, reduced high cloud cover, and low solar radiation with higher humidity contributed to climatic extremes in Bangladesh. The nexus between NDVI and climatic extremes established in this study indicated that increasing warm temperature extremes due to global warming might have severe implications on Bangladesh's ecology and the environment in the future.
Polyelectrolyte composite nanospheres are relatively new adsorbents which have attracted much attention for their efficient pollutant removal and reuse performance. A novel polyelectrolyte nanosphere with magnetic function (SA@AM) was synthesized via the electrostatic reaction between the polyanionic sodium alginate (SA) and the surface of a prepared terminal amino-based magnetic nanoparticles (AMs). SA@AM showed a size of 15-22 nm with 6.85 emu·g-1 of magnetization value, exhibiting a high adsorption capacity on Pb(II) ions representing a common heavy metal pollutant, with a maximum adsorption capacity of 105.8 mg g-1. The Langmuir isotherm adsorption fits the adsorption curve, indicating uniform adsorption of Pb(II) on the SA@AM surfaces. Repeated adsorption desorption experiments showed that the removal ratio of Pb(II) by SA@AM was more than 76%, illustrating improved regeneration performance. These results provide useful information for the production of bio-based green magnetic nano scale adsorption materials for environmental remediation applications.
Community-based monitoring is increasingly recognised as one solution to sustainable environmental management. However, the development of community-based monitoring has led to confusion or misconceptions regarding other similar initiatives. Through a review of the characteristics and synthesising criteria of effective community-based monitoring, this article addresses how to distinguish community-based monitoring from other forms of community engagement research. A review of relevant community-based monitoring literature identifies the characteristics of and knowledge gaps in procedures and governance structures. Additionally, evidence of common benefits, challenges and lessons learned for successful community-based monitoring are deliberated. As an outcome of the review, the article synthesises a set of community-based monitoring criteria as follows: (1) efficacy of initiatives, (2) technicality aspects, (3) feedback mechanisms and (4) sustainability. These synthesised criteria will be instrumental in designing customised community-based monitoring initiatives for environmental sustainability.
This study investigated the feasibility of integrated ammonium stripping and/or coconut shell waste-based activated carbon (CSWAC) adsorption in treating leachate samples. To valorize unused biomass for water treatment application, the adsorbent originated from coconut shell waste. To enhance its performance for target pollutants, the adsorbent was pretreated with ozone and NaOH. The effects of pH, temperature, and airflow rate on the removal of ammoniacal nitrogen (NH3-N) and refractory pollutants were studied during stripping alone. The removal performances of refractory compounds in this study were compared to those of other treatments previously reported. To contribute new knowledge to the field of study, perspectives on nutrients removal and recovery like phosphorus and nitrogen are presented. It was found that the ammonium stripping and adsorption treatment using the ozonated CSWAC attained an almost complete removal (99%) of NH3-N and 90% of COD with initial NH3-N and COD concentrations of 2500 mg/L and 20,000 mg/L, respectively, at optimized conditions. With the COD of treated effluents higher than 200 mg/L, the combined treatments were not satisfactory enough to remove target refractory compounds. Therefore, further biological processes are required to complete their biodegradation to meet the effluent limit set by environmental legislation. As this work has contributed to resource recovery as the driving force of landfill management, it is important to note the investment and operational expenses, engineering applicability of the technologies, and their environmental concerns and benefits. If properly managed, nutrient recovery from waste streams offers environmental and socio-economic benefits that would improve public health and create jobs for the local community.
The aquaculture industry has become increasingly important and is rapidly growing in terms of providing a protein food source for human consumption. With the increase in the global population, demand for aquaculture is high and is estimated to reach 62% of the total global production by 2030. In 2018, it was reported that the demand for aquaculture was 46% of the total production, and with the current positive trends, it may be possible to increase tremendously in the coming years. China is still one of the main players in global aquaculture production. Due to high demand, aquaculture production generates large volumes of effluent, posing a great danger to the environment. Aquaculture effluent comprises solid waste and dissolved constituents, including nutrients and contaminants of emerging concern, thereby bringing detrimental impacts such as eutrophication, chemical toxicity, and food insecurity. Waste can be removed through culture systems, constructed wetlands, biofloc, and other treatment technologies. Some methods have the potential to be applied as zero-waste discharge treatment. Thus, this article analyses the supply and demand for aquaculture products, the best practices adopted in the aquaculture industry, effluent characteristics, current issues, and effluent treatment technology.
Malaysia is one of the countries that is well known for its palm oil based products and exports all over the world. Over the years, palm oil mill has been rising at alarming rate in Malaysia, causing palm oil-based wastes to increase especially palm oil mill effluent (POME). POME in Malaysia are channelled into water bodies such as rivers after treated mostly with conventional biological method. However, with current technologies and knowledge, conventional POME treatments are seen to be outdated and require major improvements as greenhouse gaseous are emitted to the environment as well as being less cost effective. Integrated systems that combine two or more conventional methods are introduced and reviewed to provide insights on the advantages and disadvantages of the system if it is to be implemented in real life plant. Integrated systems that focus on combining conventional methods are compiled and reviewed specifically for POME treatment. Among the integrated methods that are reviewed includes biological with membrane, adsorption with magnetic field exposure, adsorption with membrane and electrocoagulation with membrane. The systems are seen to give excellent color, chemical oxygen demand (COD) and total suspended solids (TSS) removal with average of higher than 90%. Reduction in space utilization, improved treatment time as well as simplified operating system were reported when integrated systems are applied as compared to conventional treatment of POME.
As an abundant and fast-growing biomass, bamboo can be used as construction materials owing to its desirable physical and mechanical properties, environmentally friendly features, and alternative to replace toxic and hazardous wastes in industrial processing. In this study, grid material made from bamboo (termed 'bamboo grid') was developed and compared to commercially used polyvinyl chloride (PVC) as packing material in cooling towers; PVC packing has drawbacks such as fouling, deposit buildup, low durability, and is harmful to environments. The cooling capacity, energy efficiency and environmental impact of bamboo grid packing were evaluated via life cycle assessment (LCA), particularly the cumulative energy demand (CED) and the Building for Environmental and Economic Sustainability (BEES). Although the thermal performance of the PVC packing was found higher than that of the bamboo grid packing, the bamboo grid packing showed improved resistance characteristic, recording a total saving of 529.2 tons of standard coal during a six-month field test in a real thermal power generation plant. LCA results revealed that the utilization of bamboo-grid packing to replace PVC packing in cooling towers reduced total CED from 3420 MJ to 561 MJ per functional unit, achieving 6 times reduction. A desirable reduction ranging from 1.5 to 10.5 times was also recorded for the BEES indices. This LCA comparison analysis confirmed the improvement of energy efficiency and reduction of environmental impact by using the bamboo grid to replace PVC as packing material in cooling towers. The major environmental impact (BEES) indices (e.g., the total Global warming potential, Acidification, Eutrophication and Smog) were reduced by 1.5-10.5 times via the use of bamboo grid. The results demonstrate that bamboo grid packing is a good alternative to replace existing grid packing materials such as concrete and PVC that are harmful to human health and environments.