MyMedR

Displaying publications 101 - 120 of 461 in total

Abstract:

Sort:

Fulltext Understanding the NaCl-dependent behavior of hydrogen production of a marine bacterium, Vibrio tritonius

Al-Saari N, Amada E, Matsumura Y, Tanaka M, Mino S, Sawabe T

PeerJ, 2019;7:e6769.
PMID: 31024772 DOI: 10.7717/peerj.6769

Biohydrogen is one of the most suitable clean energy sources for sustaining a fossil fuel independent society. The use of both land and ocean bioresources as feedstocks show great potential in maximizing biohydrogen production, but sodium ion is one of the main obstacles in efficient bacterial biohydrogen production. Vibrio tritonius strain AM2 can perform efficient hydrogen production with a molar yield of 1.7 mol H2/mol mannitol, which corresponds to 85% theoretical molar yield of H2 production, under saline conditions. With a view to maximizing the hydrogen production using marine biomass, it is important to accumulate knowledge on the effects of salts on the hydrogen production kinetics. Here, we show the kinetics in batch hydrogen production of V. tritonius strain AM2 to investigate the response to various NaCl concentrations. The modified Han-Levenspiel model reveals that salt inhibition in hydrogen production using V. tritonius starts precisely at the point where 10.2 g/L of NaCl is added, and is critically inhibited at 46 g/L. NaCl concentration greatly affects the substrate consumption which in turn affects both growth and hydrogen production. The NaCl-dependent behavior of fermentative hydrogen production of V. tritonius compared to that of Escherichia coli JCM 1649 reveals the marine-adapted fermentative hydrogen production system in V. tritonius. V. tritonius AM2 is capable of producing hydrogen from seaweed carbohydrate under a wide range of NaCl concentrations (5 to 46 g/L). The optimal salt concentration producing the highest levels of hydrogen, optimal substrate consumption and highest molar hydrogen yield is at 10 g/L NaCl (1.0% (w/v)).

Matched MeSH terms: Fermentation
Fulltext 13C based proteinogenic amino acid (PAA) and metabolic flux ratio analysis of Lactococcus lactis reveals changes in pentose phosphate (PP) pathway in response to agitation and temperature related stresses

Azizan KA, Ressom HW, Mendoza ER, Baharum SN

PeerJ, 2017;5:e3451.
PMID: 28695065 DOI: 10.7717/peerj.3451

Lactococcus lactis subsp. cremoris MG1363 is an important starter culture for dairy fermentation. During industrial fermentations, L. lactis is constantly exposed to stresses that affect the growth and performance of the bacterium. Although the response of L. lactis to several stresses has been described, the adaptation mechanisms at the level of in vivo fluxes have seldom been described. To gain insights into cellular metabolism, 13C metabolic flux analysis and gas chromatography mass spectrometry (GC-MS) were used to measure the flux ratios of active pathways in the central metabolism of L. lactis when subjected to three conditions varying in temperature (30°C, 37°C) and agitation (with and without agitation at 150 rpm). Collectively, the concentrations of proteinogenic amino acids (PAAs) and free fatty acids (FAAs) were compared, and Pearson correlation analysis (r) was calculated to measure the pairwise relationship between PAAs. Branched chain and aromatic amino acids, threonine, serine, lysine and histidine were correlated strongly, suggesting changes in flux regulation in glycolysis, the pentose phosphate (PP) pathway, malic enzyme and anaplerotic reaction catalysed by pyruvate carboxylase (pycA). Flux ratio analysis revealed that glucose was mainly converted by glycolysis, highlighting the stability of L. lactis' central carbon metabolism despite different conditions. Higher flux ratios through oxaloacetate (OAA) from pyruvate (PYR) reaction in all conditions suggested the activation of pyruvate carboxylate (pycA) in L. lactis, in response to acid stress during exponential phase. Subsequently, more significant flux ratio differences were seen through the oxidative and non-oxidative pentose phosphate (PP) pathways, malic enzyme, and serine and C1 metabolism, suggesting NADPH requirements in response to environmental stimuli. These reactions could play an important role in optimization strategies for metabolic engineering in L. lactis. Overall, the integration of systematic analysis of amino acids and flux ratio analysis provides a systems-level understanding of how L. lactis regulates central metabolism under various conditions.

Matched MeSH terms: Fermentation
Optimization of Culture Medium for the Growth of Candida sp. and Blastobotrys sp. as Starter Culture in Fermentation of Cocoa Beans (Theobroma cacao) Using Response Surface Methodology (RSM)

Mahazar NH, Zakuan Z, Norhayati H, MeorHussin AS, Rukayadi Y

Pak J Biol Sci, 2017;20(3):154-159.
PMID: 29023007 DOI: 10.3923/pjbs.2017.154.159

BACKGROUND AND OBJECTIVE: Inoculation of starter culture in cocoa bean fermentation produces consistent, predictable and high quality of fermented cocoa beans. It is important to produce healthy inoculum in cocoa bean fermentation for better fermented products. Inoculum could minimize the length of the lag phase in fermentation. The purpose of this study was to optimize the component of culture medium for the maximum cultivation of Candida sp. and Blastobotrys sp.
MATERIALS AND METHODS: Molasses and yeast extract were chosen as medium composition and Response Surface Methodology (RSM) was then employed to optimize the molasses and yeast extract.
RESULTS: Maximum growth of Candida sp. (7.63 log CFU mL-1) and Blastobotrys sp. (8.30 log CFU mL-1) were obtained from the fermentation. Optimum culture media for the growth of Candida sp., consist of 10% (w/v) molasses and 2% (w/v) yeast extract, while for Blastobotrys sp., were 1.94% (w/v) molasses and 2% (w/v) yeast extract.
CONCLUSION: This study shows that culture medium consists of molasses and yeast extract were able to produce maximum growth of Candida sp. and Blastobotrys sp., as a starter culture for cocoa bean fermentation.

Matched MeSH terms: Fermentation*
Removal of headspace CO2 increases biological hydrogen production by C. acetobutylicum

Alshiyab H, Kalil MS, Hamid AA, Yusoff WM

Pak J Biol Sci, 2008 Oct 01;11(19):2336-40.
PMID: 19137867

The effect of removal of resultant gas resulted in enhancement of the H2 yield. The technique of CO2 scavenging resulted in H2 yield being improved from 408 mL g(-1) to reach the maximum of 422 mL g'. The highest hydrogen productivity of 87.9 ml L(-1) h(-1) was obtained by CO2 scavenging. Biomass concentration was enhanced to 1.47 g L(-1), Y(P,X) of 287 ml g(-1) L(-1), Y(X/S) of 0.294 and Y(H2/s) of 0.0377 by the use of CO2 scavenging. The results suggested that the presence of the gaseous products in fermentation medium and headspace adversely effect biomass growth and hydrogen production.

Matched MeSH terms: Fermentation
Effect of salts addition on hydrogen production by C. acetobutylicum

Alshiyab H, Kalil MS, Hamid AA, Wan Yusoff WM

Pak J Biol Sci, 2008 Sep 15;11(18):2193-200.
PMID: 19137827

The objective of this study is to investigate the effect of salts addition to fermentation medium on hydrogen production, under anaerobic batch culture system. In this study, batch experiments were conducted to investigate the inhibitory effect of both NaCl and sodium acetate on hydrogen production. The optimum pH and temperature for hydrogen production were at initial pH of 7.0 and 30 degrees C. Enhanced production of hydrogen, using glucose as substrate was achieved. In the absence of Sodium Chloride and Sodium Acetate enhanced hydrogen yield (Y(P/S)) from 350 mL g(-1) glucose utilized to 391 mL g(-1) glucose utilized with maximum hydrogen productivity of 77.5 ml/L/h. Results also show that sodium chloride and sodium acetate in the medium adversely affect growth. Hydrogen yield per biomass (Y(P/X)) of 254 ml/L/g, biomass per substrate utilized (Y(X/S)) of 0.268 and (Y(H2/S) of 0.0349. The results suggested that Sodium at any concentration resulted to inhibit the bacterial productivity of hydrogen.

Matched MeSH terms: Fermentation/drug effects
The effect of aeration, agitation and light on biohydrogen production by Rhodobacter sphaeroides NCIMB 8253

Jaapar SZ, Kalil MS, Anuar N

Pak J Biol Sci, 2009 Sep 15;12(18):1253-9.
PMID: 20384278

Photo fermentation is a biological process that can be applied for hydrogen production. The process is environmental friendly which is operated under mild conditions using renewable resources. In order to increase yield of H2 produced by Rhodobacter sphaeroides, some experimental factors that may enhance H2 production were studied. The effect of operating parameters including agitation, aeration and light on hydrogen production using R. sphaeroides NCIMB 8253 was investigated. Rhodobacter sphaeroides NCIMB 8253 was grown in 100 mL serum bottle containing growth medium with maliec acid as the sole organic carbon source. The cultures were incubated anaerobically at 30 degrees C with tungsten lamp (100 W) as the light source (3.8 klux) and argon gas was purged for maintaining anaerobic condition. The results show that maximum hydrogen produced was higher (54.37 mL) in static culture with 69.98% of H2 in the total gas compared with shake culture (11.57 mL) with 57.86% of H2. By using static culture, H2 produced was five times higher compared with non-static in both aerobic and anaerobic condition. It was found that growth and H2 production with fluorescent lamp showed better results than growth and H2 production with tungsten light.

Matched MeSH terms: Fermentation
Bio-hydrogen production using a two-stage fermentation process

Alalayah WM, Kalil MS, Kadhum AA, Jahim JM, Jaapar SZ, Alauj NM

Pak J Biol Sci, 2009 Nov 15;12(22):1462-7.
PMID: 20180320

A two-stage fermentation process consisting of dark and photo-fermentation periods was carried out in a batch reactor. In the first stage, glucose was fermented in the dark stage using Clostridium saccharoperbutylacetonicum N1-4 (ATCC 13564; CSN1-4) to produce acetate, CO2 and H2. The acetate produced in the first stage is fermented to H2 and CO2 by Rhodobacter sphaeroides NCIMB 8253 for further hydrogen production in the second, illuminated stage. The yield of hydrogen in the first stage was about 3.10 mol H2 (mol glucose)(-1) at a glucose concentration of 10 g L(-1), pH 6 +/- 0.2 and 37 degrees C and the second stage yield was about 1.10-1.25 mol H2 (mol acetic acid)(-1) at pH 6.8 +/- 0.2 and 32 degrees C, without removal of the Clostridium CSN1-4. The overall yield of hydrogen in the two-stage process, with glucose as the main substrate was higher than single-stage fermentation.

Matched MeSH terms: Fermentation/physiology*
Xylanase production by Aspergillus niger FTCC 5003 using palm kernel cake in fermentative bioprocess

Abdeshahian P, Samat N, Yusoff WM

Pak J Biol Sci, 2009 Aug 01;12(15):1049-55.
PMID: 19943460

The production of xylanase from palm kernel cake as a substrate was studied in solid substrate fermentation. The simultaneous effects of three independent variables, namely incubation temperature, initial moisture content of substrate and air flow rate on xylanase production were evaluated by response surface methodology using central composite face centered design. A total of 18 experiments were carried out in which Aspergillus niger FTCC 5003 was cultivated on palm kernel cake in a column bioreactor for 7 days under incubation temperature, moisture level and aeration rate determined. Test results showed that the highest xylanase activity of 174.88 U g(-1) was produced at incubation temperature, initial moisture level and aeration rate of 25 degrees C, 60% and 1.5 L min(-1), respectively. The statistical analysis of the experimental results revealed that the linear effect of incubation temperature and quadratic term of initial moisture content had highly significant effects on xylanase production (p<0.01). Statistical results also showed that interaction effect between incubation temperature and initial moisture content as well as interaction effect between moisture level and aeration rate influenced the yield ofxylanase at probability levels of 95%. Optimum conditions determined by statistical model for attaining maximum xylanase production were incubation temperature of 25 degrees C, initial moisture level of 63% and aeration rate of 1.76 L min(-1). The xylanase activity of 192.50 U g(-1) was obtained when solid substrate fermentation was performed under the optimal circumstances.

Matched MeSH terms: Fermentation*
Applications of the Box-Wilson design model for bio-hydrogen production using Clostridium saccharoperbutylacetonicum N1-4 (ATCC 13564)

Alalayah WM, Kalil MS, Kadhum AA, Jahim J, Zaharim A, Alauj NM, et al.

Pak J Biol Sci, 2010 Jul 15;13(14):674-82.
PMID: 21848059

Box-Wilson design (BWD) model was applied to determine the optimum values of influencing parameters in anaerobic fermentation to produce hydrogen using Clostridium saccharoperbutylacetonicum N1-4 (ATCC 13564). The main focus of the study was to find the optimal relationship between the hydrogen yield and three variables including initial substrate concentration, initial medium pH and reaction temperature. Microbial growth kinetic parameters for hydrogen production under anaerobic conditions were determined using the Monod model with incorporation of a substrate inhibition term. The values of micro(max) (maximum specific growth rate) and K, (saturation constant) were 0.398 h(-1) and 5.509 g L(-1), respectively, using glucose as the substrate. The experimental substrate and biomass-concentration profiles were in good agreement with those obtained by the kinetic-model predictions. By varying the conditions of the initial substrate concentration (1-40 g L(-1)), reaction temperature (25-40 degrees C) and initial medium pH (4-8), the model predicted a maximum hydrogen yield of 3.24 mol H2 (mol glucose)(-1). The experimental data collected utilising this design was successfully fitted to a second-order polynomial model. An optimum operating condition of 10 g L(-1) initial substrate concentration, 37 degrees C reaction temperature and 6.0 +/- 0.2 initial medium pH gave 80% of the predicted maximum yield of hydrogen where as the experimental yield obtained in this study was 77.75% exhibiting a close accuracy between estimated and experimental values. This is the first report to predict bio-hydrogen yield by applying Box-Wilson Design in anaerobic fermentation while optimizing the effects of environmental factors prevailing there by investigating the effects of environmental factors.

Matched MeSH terms: Fermentation
Immobilised Sarawak Malaysia yeast cells for production of bioethanol

Zain MM, Kofli NT, Rozaimah S, Abdullah S

Pak J Biol Sci, 2011 May 01;14(9):526-32.
PMID: 22032081

Bioethanol production using yeast has become a popular topic due to worrying depleting worldwide fuel reserve. The aim of the study was to investigate the capability of Malaysia yeast strains isolated from starter culture used in traditional fermented food and alcoholic beverages in producing Bioethanol using alginate beads entrapment method. The starter yeast consists of groups of microbes, thus the yeasts were grown in Sabouraud agar to obtain single colony called ST1 (tuak) and ST3 (tapai). The growth in Yeast Potatoes Dextrose (YPD) resulted in specific growth of ST1 at micro = 0.396 h-1 and ST3 at micro = 0.38 h-1, with maximum ethanol production of 7.36 g L-1 observed using ST1 strain. The two strains were then immobilized using calcium alginate entrapment method producing average alginate beads size of 0.51 cm and were grown in different substrates; YPD medium and Local Brown Sugar (LBS) for 8 h in flask. The maximum ethanol concentration measured after 7 h were at 6.63 and 6.59 g L-1 in YPD media and 1.54 and 1.39 g L-1in LBS media for ST1 and ST3, respectively. The use of LBS as carbon source showed higher yield of product (Yp/s), 0.59 g g-1 compared to YPD, 0.25 g g-1 in ST1 and (Yp/s), 0.54 g g-1 compared to YPD, 0.24 g g-1 in ST3 . This study indicated the possibility of using local strains (STI and ST3) to produce bioethanol via immobilization technique with local materials as substrate.

Matched MeSH terms: Fermentation
Optimization of complex fermentation media for glucose oxidase production using statistical approach

Gunny AA, Arbain D, Sithamparam L

Pak J Biol Sci, 2013 Sep 15;16(18):960-4.
PMID: 24502155

Production cost of enzyme is largely determined by the type of the strain and raw material used to propagate the strain. Hence, selection of the strain and raw materials is crucial in enzyme production. For Glucose oxidase (GOx), previous studies showed Aspergillus terreus UniMAP AA-1 offers a better alternative to the existing sources. Thus, a lower production cost could be logically anticipated by growing the strain in a cheaper complex media such as molasses. In this work, sugar cane molasses, supplemented with urea and carbonate salt and a locally isolated strain Aspergillus terreus UniMAP AA-1 were used to produce a crude GOx enzyme in a small scale. A statistical optimization approach namely Response Surface Methodology (RSM) was used to optimize the media components for highest GOx activity. It was found that the highest GOx activity was achieved using a combination of molasses, carbonate salt and urea at concentration 32.51, 4.58 and 0.93% (w/v), respectively. This study provides an alternative optimized media conditions for GOx production using locally available raw materials.

Matched MeSH terms: Fermentation*
Studies on extraction of mannanase enzyme by Aspergillus terreus SUK-1 from fermented palm kernel cake

Rashid JI, Samat N, Yusoff WM

Pak J Biol Sci, 2013 Sep 15;16(18):933-8.
PMID: 24502150

Microbial mannanases have become biotechnologically important in industry but their application is limited due to high production cost. In presents study, the extraction of mannanase from fermented Palm Kernel Cake (PKC) in the Solid State Fermentation (SSF) was optimized. Local isolate of Aspergillus terreus SUK-1 was grown on PKC in (SSF) using column bioreactor. The optimum condition were achieved after two washes of fermented PKC by adding of 10% glycerol (v/v) soaked for 10 h at the room temperature with solvent to ratio, 1:5 (w/v).

Matched MeSH terms: Fermentation*
Bioconversion of oil palm frond by Aspergillus niger to enhances it's fermentable sugar production

Lim SH, Ibrahim D

Pak J Biol Sci, 2013 Sep 15;16(18):920-6.
PMID: 24502148

The aim of this study was to develop an economical bioprocess to produce the fermentable sugars at laboratory scales Using Oil Palm Frond (OPF) as substrate in Solid State Fermentation (SSF). OPF waste generated by oil palm plantations is a major problem in terms of waste management. However, this lignocellulosic waste material is a cheap source of cellulose. We used OPF as substrate to produce fermentable sugars. The high content of cellulose in OPF promises the high fermentable sugars production in SSF. Saccharification of OPF waste by A. niger USMAI1 generates fermentable sugars and was evaluated through a solid state fermentation. Physical parameters, e.g., inoculum size, initial substrate moisture, initial pH, incubation temperature and the size of substrate were optimized to obtain the maximum fermentable sugars from oil palm fronds. Up to 77 mg of fermentable sugars per gram substrate was produced under the optimal physical parameter conditions. Lower productivity of fermentable sugars, 32 mg fermentable sugars per gram substrate was obtained under non optimized conditions. The results indicated that about 140.6% increase in fermentable sugar production after optimization of the physical parameters. Glucose was the major end component amongst the fermentable sugars obtained. This study indicated that under optimum physical parameter conditions, the OPF waste can be utilized to produce fermentable sugars which then convert into other products such as alcohol.

Matched MeSH terms: Fermentation*
Effect of some environmental parameters on biobutanol production by Clostridium acetobutylicum NCIMB 13357 in date fruit medium

Khamaiseh EI, Hamid AA, Yusoff WM, Kalil MS

Pak J Biol Sci, 2013 Oct 15;16(20):1145-51.
PMID: 24506014

Date fruit juice contains high concentration of simple sugars ranging from 65 to 75% (w/w) in dry form. In this study, the potential of date fruit juice as biobutanol fermentation medium by C. acetobutylicum was investigated. The fermentation process was carried out at initial pH of 5, 6 and 7, incubation temperature of 30, 35 and 40 degrees C for 72 hours. The date fruit concentrations tested were 10, 20, 30 and 40 g L(-1). Medium containing 30 g L(-1) of date fruit at 35 degrees C incubation temperature with initial medium pH 7.0 gave the highest concentration of solvents of 3.1, 0.1 and 1.1 g L(-1) butanol, ethanol and acetone respectively. The yield and productivity of biobutanol were 0.32 g g(-1) and 0.044 g L(-1)/h respectively, while for total ABE were 0.45 g g(-1) and 0.06 g L(-1) h, respectively.

Matched MeSH terms: Fermentation
Optimization of temperature, moisture content and inoculum size in solid state fermentation to enhance mannanase production by Aspergillus terreus SUK-1 using RSM

Rashid JI, Samat N, Mohtar W, Yusoff W

Pak J Biol Sci, 2011 May 01;14(9):533-9.
PMID: 22032082

Optimization of three parameters, temperature (25-35 degrees C), moisture content (40% (w/v)-60% (w/v) and inoculum sizes (5% (w/v)-15% (w/v) were investigated and optimized by Response Surface Methodology (RSM) for optimal mannanase production by Aspergillus terreus SUK-1. A second order polynomial equation was fitted and the optimum condition was established. The result showed that the moisture content was a critical factor in terms of its effect on mannanase. The optimum condition for mannanase production was predicted at 42.86% (w/v) initial moisture (31 C) temperature and 5.5% (w/v) inoculum size. The predicted optimal parameter were tested in the laboratory and the mannanase activity 45.12 IU mL-1 were recorded to be closed to the predicted value (44.80 IU mL-1). Under the optimized SSF condition (31 degrees C, 42.86% moisture content (w/v) and 5.5% inoculum size (w/v)), the maximum mannanase production was to prevail about 45.12 IU mL-1 compare to before optimized (30 degrees C, 50% moisture content (w/v) and 10% inoculum size (w/v)) was only 34.42 IU mL-1.

Matched MeSH terms: Fermentation
A new oxolane from Enterobacter cloacae

Yap AC, Chan KG, Sim KS, Choo YM

Nat Prod Res, 2016 Apr;30(7):783-8.
PMID: 26252083 DOI: 10.1080/14786419.2015.1065492

Enterobacter cloacae is a highly pathogenic Gram-negative proteobacterium which is responsible for a wide array of infections. In the present study, the fermentation culture of E. cloacae has yielded one new oxolane compound, Rimboxo (1) in addition to three known compounds, i.e. Maculosine (2), phenylacetic acid (3) and methyl myristate (4). These compounds were isolated and characterised using extensive chromatographic and spectroscopic methods, and were subjected to cytotoxicity evaluations.

Matched MeSH terms: Fermentation
Fulltext Metabolic profiling of Lactococcus lactis under different culture conditions

Azizan KA, Baharum SN, Mohd Noor N

Molecules, 2012 Jul 03;17(7):8022-36.
PMID: 22759915 DOI: 10.3390/molecules17078022

Gas chromatography mass spectrometry (GC-MS) and headspace gas chromatography mass spectrometry (HS/GC-MS) were used to study metabolites produced by Lactococcus lactis subsp. cremoris MG1363 grown at a temperature of 30 °C with and without agitation at 150 rpm, and at 37 °C without agitation. It was observed that L. lactis produced more organic acids under agitation. Primary alcohols, aldehydes, ketones and polyols were identified as the corresponding trimethylsilyl (TMS) derivatives, whereas amino acids and organic acids, including fatty acids, were detected through methyl chloroformate derivatization. HS analysis indicated that branched-chain methyl aldehydes, including 2-methylbutanal, 3-methylbutanal, and 2-methylpropanal are degdradation products of isoleucine, leucine or valine. Multivariate analysis (MVA) using partial least squares discriminant analysis (PLS-DA) revealed the major differences between treatments were due to changes of amino acids and fermentation products.

Matched MeSH terms: Fermentation/drug effects
Fulltext Optimization of γ-aminobutyric acid production by Lactobacillus plantarum Taj-Apis362 from honeybees

Tajabadi N, Ebrahimpour A, Baradaran A, Rahim RA, Mahyudin NA, Manap MY, et al.

Molecules, 2015 Apr 15;20(4):6654-69.
PMID: 25884548 DOI: 10.3390/molecules20046654

Dominant strains of lactic acid bacteria (LAB) isolated from honey bees were evaluated for their γ-aminobutyric acid (GABA)-producing ability. Out of 24 strains, strain Taj-Apis362 showed the highest GABA-producing ability (1.76 mM) in MRS broth containing 50 mM initial glutamic acid cultured for 60 h. Effects of fermentation parameters, including initial glutamic acid level, culture temperature, initial pH and incubation time on GABA production were investigated via a single parameter optimization strategy. The optimal fermentation condition for GABA production was modeled using response surface methodology (RSM). The results showed that the culture temperature was the most significant factor for GABA production. The optimum conditions for maximum GABA production by Lactobacillus plantarum Taj-Apis362 were an initial glutamic acid concentration of 497.97 mM, culture temperature of 36 °C, initial pH of 5.31 and incubation time of 60 h, which produced 7.15 mM of GABA. The value is comparable with the predicted value of 7.21 mM.

Matched MeSH terms: Fermentation
Fulltext Development of Palm Fatty Acid Distillate-Containing Medium for Biosurfactant Production by Pseudomonas sp. LM19

Nurfarahin AH, Mohamed MS, Phang LY

Molecules, 2019 Jul 18;24(14).
PMID: 31323769 DOI: 10.3390/molecules24142613

High production costs of biosurfactants are mainly caused by the usage of the expensive substrate and long fermentation period which undermines their potential in bioremediation processes, food, and cosmetic industries even though they, owing to the biodegradability, lower toxicity, and raise specificity traits. One way to circumvent this is to improvise the formulation of biosurfactant-production medium by using cheaper substrate. A culture medium utilizing palm fatty acid distillate (PFAD), a palm oil refinery by-product, was first developed through one-factor-at-a-time (OFAT) technique and further refined by means of the statistical design method of factorial and response surface modeling to enhance the biosurfactant production from Pseudomonas sp. LM19. The results shows that, the optimized culture medium containing: 1.148% (v/v) PFAD; 4.054 g/L KH2PO4; 1.30 g/L yeast extract; 0.023 g/L sodium-EDTA; 1.057 g/L MgSO4·7H2O; 0.75 g/L K2HPO4; 0.20 g/L CaCl2·2H2O; 0.080 g/L FeCl3·6H2O gave the maximum biosurfactant productivity. This study demonstrated that the cell concentration and biosurfactant productivity could reach up to 8.5 × 109 CFU/mL and 0.346 g/L/day, respectively after seven days of growth, which were comparable to the values predicted by an RSM regression model, i.e., 8.4 × 109 CFU/mL and 0.347 g/L/day, respectively. Eleven rhamnolipid congeners were detected, in which dirhamnolipid accounted for 58% and monorhamnolipid was 42%. All in all, manipulation of palm oil by-products proved to be a feasible substrate for increasing the biosurfactant production about 3.55-fold as shown in this study.

Matched MeSH terms: Fermentation
Fulltext Stingless Bee-Collected Pollen (Bee Bread): Chemical and Microbiology Properties and Health Benefits

Mohammad SM, Mahmud-Ab-Rashid NK, Zawawi N

Molecules, 2021 Feb 11;26(4).
PMID: 33670262 DOI: 10.3390/molecules26040957

Stingless bee-collected pollen (bee bread) is a mixture of bee pollen, bee salivary enzymes, and regurgitated honey, fermented by indigenous microbes during storage in the cerumen pot. Current literature data for bee bread is overshadowed by bee pollen, particularly of honeybee Apis. In regions such as South America, Australia, and Southeast Asia, information on stingless bee bee bread is mainly sought to promote the meliponiculture industry for socioeconomic development. This review aims to highlight the physicochemical properties and health benefits of bee bread from the stingless bee. In addition, it describes the current progress on identification of beneficial microbes associated with bee bread and its relation to the bee gut. This review provides the basis for promoting research on stingless bee bee bread, its nutrients, and microbes for application in the food and pharmaceutical industries.

Matched MeSH terms: Fermentation

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links