MyMedR

Displaying publications 101 - 120 of 308 in total

Abstract:

Sort:

Engineering physical microenvironment for stem cell based regenerative medicine

Han YL, Wang S, Zhang X, Li Y, Huang G, Qi H, et al.

Drug Discov Today, 2014 Jun;19(6):763-73.
PMID: 24508818 DOI: 10.1016/j.drudis.2014.01.015

Regenerative medicine has rapidly evolved over the past decade owing to its potential applications to improve human health. Targeted differentiations of stem cells promise to regenerate a variety of tissues and/or organs despite significant challenges. Recent studies have demonstrated the vital role of the physical microenvironment in regulating stem cell fate and improving differentiation efficiency. In this review, we summarize the main physical cues that are crucial for controlling stem cell differentiation. Recent advances in the technologies for the construction of physical microenvironment and their implications in controlling stem cell fate are also highlighted.

Matched MeSH terms: Tissue Engineering/methods*
Cellulose supported magnetic nanohybrids: Synthesis, physicomagnetic properties and biomedical applications-A review

Haniffa MACM, Munawar K, Chee CY, Pramanik S, Halilu A, Illias HA, et al.

Carbohydr Polym, 2021 Sep 01;267:118136.
PMID: 34119125 DOI: 10.1016/j.carbpol.2021.118136

Cellulose and its forms are widely used in biomedical applications due to their biocompatibility, biodegradability and lack of cytotoxicity. It provides ample opportunities for the functionalization of supported magnetic nanohybrids (CSMNs). Because of the abundance of surface hydroxyl groups, they are surface tunable in either homogeneous or heterogeneous solvents and thus act as a substrate or template for the CSMNs' development. The present review emphasizes on the synthesis of various CSMNs, their physicomagnetic properties, and potential applications such as stimuli-responsive drug delivery systems, MRI, enzyme encapsulation, nucleic acid extraction, wound healing and tissue engineering. The impact of CSMNs on cytotoxicity, magnetic hyperthermia, and folate-conjugates is highlighted in particular, based on their structures, cell viability, and stability. Finally, the review also discussed the challenges and prospects of CSMNs' development. This review is expected to provide CSMNs' development roadmap in the context of 21st-century demands for biomedical therapeutics.

Matched MeSH terms: Tissue Engineering/methods
Fulltext Recent advances in application of biosensors in tissue engineering

Hasan A, Nurunnabi M, Morshed M, Paul A, Polini A, Kuila T, et al.

Biomed Res Int, 2014;2014:307519.
PMID: 25165697 DOI: 10.1155/2014/307519

Biosensors research is a fast growing field in which tens of thousands of papers have been published over the years, and the industry is now worth billions of dollars. The biosensor products have found their applications in numerous industries including food and beverages, agricultural, environmental, medical diagnostics, and pharmaceutical industries and many more. Even though numerous biosensors have been developed for detection of proteins, peptides, enzymes, and numerous other biomolecules for diverse applications, their applications in tissue engineering have remained limited. In recent years, there has been a growing interest in application of novel biosensors in cell culture and tissue engineering, for example, real-time detection of small molecules such as glucose, lactose, and H2O2 as well as serum proteins of large molecular size, such as albumin and alpha-fetoprotein, and inflammatory cytokines, such as IFN-g and TNF-α. In this review, we provide an overview of the recent advancements in biosensors for tissue engineering applications.

Matched MeSH terms: Tissue Engineering*
In vitro differences of hydroxyapatite from different resources in simulated body fluid

Hashim N, Sabudin S, Ibrahim S, Zin NM, Bakar SH, Fazan F

Med J Malaysia, 2004 May;59 Suppl B:103-4.
PMID: 15468839

Hydroxyapatite (HA; Ca10(PO4)6(OH)2), is one of the significant implant materials used in Orthopaedics and Dental applications. However, synthetically produced HA may not be stable under ionic environment, which it will unavoidably encounter during its applications. In this paper, the in vitro effects of three HA materials derived from different resources, i.e. commercial HA (HAC), synthesised HA from pure chemicals (HAS) and synthesised HA from kapur sireh; derived traditionally from natural limestone (HAK), were studied. The HA disc samples were prepared and immersed in simulated body fluid (SBF) for 31-day period. The evaluation conducted focuses on the changes of the pH and the Calcium ion (Ca-ion) and Phosphate ion (P-ion) concentrations in the SBF solution, as well as the XRD and SEM data representing the reactions on the HA materials. From the XRD, it was found that HAK has the smallest crystallite sizes, which in turn affect the pH of the SBF during immersion. The Ca and P-ion concentrations generally decrease over time at different rates for different HA. Upon 1-day immersion in SBF, apatite growth was observed onto all three surfaces, which became more pronounced after 3-day immersion. However, the appetites formed were observed to be different in shapes and sizes. The reasons for the difference in the apatite-crystals and their subsequent effects on cells are still being investigated.

Matched MeSH terms: Tissue Engineering
Fulltext Angiogenic potential of extracellular matrix of human amniotic membrane

Hashim SNM, Yusof MFH, Zahari W, Noordin KBAA, Kannan TP, Hamid SSA, et al.

Tissue Eng Regen Med, 2016 Jun;13(3):211-217.
PMID: 30603401 DOI: 10.1007/s13770-016-9057-6

Combination between tissue engineering and other fields has brought an innovation in the area of regenerative medicine which ultimate aims are to repair, improve, and produce a good tissue construct. The availability of many types of scaffold, both synthetically and naturally have developed into many outstanding end products that have achieved the general objective in tissue engineering. Interestingly, most of this scaffold emulates extracellular matrix (ECM) characteristics. Therefore, ECM component sparks an interest to be explored and manipulated. The ECM featured in human amniotic membrane (HAM) provides a suitable niche for the cells to adhere, grow, proliferate, migrate and differentiate, and could possibly contribute to the production of angiogenic micro-environment indirectly. Previously, HAM scaffold has been widely used to accelerate wound healing, treat bone related and ocular diseases, and involved in cardiovascular repair. Also, it has been used in the angiogenicity study, but with a different technical approach. In addition, both side of HAM could be used in cellularised and decellularised conditions depending on the objectives of a particular research. Therefore, it is of paramount importance to investigate the behavior of ECM components especially on the stromal side of HAM and further explore the angiogenic potential exhibited by this scaffold.

Matched MeSH terms: Tissue Engineering
Human Amniotic Membrane with Aligned Electrospun Fiber as Scaffold for Aligned Tissue Regeneration

Hasmad H, Yusof MR, Mohd Razi ZR, Hj Idrus RB, Chowdhury SR

Tissue Eng Part C Methods, 2018 06;24(6):368-378.
PMID: 29690856 DOI: 10.1089/ten.TEC.2017.0447

Fabrication of composite scaffolds is one of the strategies proposed to enhance the functionality of tissue-engineered scaffolds for improved tissue regeneration. By combining multiple elements together, unique biomimetic scaffolds with desirable physical and mechanical properties can be tailored for tissue-specific applications. Despite having a highly porous structure, the utility of electrospun fibers (EF) as scaffold is usually hampered by their insufficient mechanical strength. In this study, we attempted to produce a mechanically competent scaffold with cell-guiding ability by fabricating aligned poly lactic-co-glycolic acid (PLGA) fibers on decellularized human amniotic membrane (HAM), known to possess favorable tensile and wound healing properties. Decellularization of HAM in 18.75 μg/mL of thermolysin followed by a brief treatment in 0.25 M sodium hydroxide efficiently removed the amniotic epithelium and preserved the ultrastructure of the underlying extracellular matrix. The electrospinning of 20% (w/v) PLGA 50:50 polymer on HAM yielded beadless fibers with straight morphology. Subsequent physical characterization revealed that EF-HAM scaffold with a 3-min fabrication had the most aligned fibers with the lowest fiber diameter in comparison with EF-HAM 5- and 7-min scaffolds. Hydrated EF-HAM scaffolds with 3-min deposition had a greater tensile strength than the other scaffolds despite having thinner fibers. Nevertheless, wet HAM and EF-HAMs regardless of the fiber thicknesses had a significantly lower Young's modulus, and hence, a higher elasticity compared with dry HAM and EF-HAMs. Biocompatibility analysis showed that the viability and migration rate of skeletal muscle cells on EF-HAMs were similar to control and HAM alone. Skeletal muscle cells seeded on HAM were shown to display random orientation, whereas cells on EF-HAM scaffolds were oriented along the alignment of the electrospun PLGA fibers. In summary, besides having good mechanical strength and elasticity, EF-HAM scaffold design decorated with aligned fiber topography holds a promising potential for use in the development of aligned tissue constructs.

Matched MeSH terms: Tissue Engineering/methods*
Biomineralized Conductive PEDOT: PSS-Coated PLA/PHBV/HA Nanofibrous Membranes

Hassan MI, Masnawi NN, Sultana N

ASAIO J., 2017 9 14;64(3):415-423.
PMID: 28901994 DOI: 10.1097/MAT.0000000000000655

Conductive materials are potential candidates for developing bone tissue engineering scaffolds as they are nontoxic and can enhance bone tissue regeneration. Their bioactivity can be enhanced by depositing biomineralization in simulated body fluid (SBF). In the current study, a composite electrospun membrane made up of poly(lactic) acid, poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and hydroxyapatite was fabricated using an electrospinning method. The fabricated membranes were dip-coated with a conductive polymer solution, poly(3,4-ethylenedioxythiophene) poly(4-styrenesulfonate), to induce conductivity. Characterization of the membranes based on characteristics such as morphology, chemical bonding, and wettability was conducted using scanning electron microscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy, and contact angle measurement. From the results, biomineralization of both coated and noncoated composite membranes was observed on the surface of nanofibers after 21 days in SBF. The membranes provide a superhydrophilic surface as shown by the contact angle. In conclusion, this biomimetic electrospun composite membrane could be used to further support cell growth for bone tissue engineering application.

Matched MeSH terms: Tissue Engineering
Fulltext Neural-differentiated mesenchymal stem cells incorporated into muscle stuffed vein scaffold forms a stable living nerve conduit

Hassan NH, Sulong AF, Ng MH, Htwe O, Idrus RB, Roohi S, et al.

J Orthop Res, 2012 Oct;30(10):1674-81.
PMID: 22411691 DOI: 10.1002/jor.22102

Autologous nerve grafts to bridge nerve gaps have donor site morbidity and possible neuroma formation resulting in development of various methods of bridging nerve gaps without using autologous nerve grafts. We have fabricated an acellular muscle stuffed vein seeded with differentiated mesenchymal stem cells (MSCs) as a substitute for nerve autografts. Human vein and muscle were both decellularized by liquid nitrogen immersion with subsequent hydrolysis in hydrochloric acid. Human MSCs were subjected to a series of treatments with a reducing agent, retinoic acid, and a combination of trophic factors. The differentiated MSCs were seeded on the surface of acellular muscle tissue and then stuffed into the vein. Our study showed that 35-75% of the cells expressed neural markers such as S100b, glial fibrillary acidic protein (GFAP), p75 NGF receptor, and Nestin after differentiation. Histological and ultra structural analyses of muscle stuffed veins showed attachment of cells onto the surface of the acellular muscle and penetration of the cells into the hydrolyzed fraction of muscle fibers. We implanted these muscle stuffed veins into athymic mice and at 8 weeks post-implantation, the acellular muscle tissue had fully degraded and replaced with new matrix produced by the seeded cells. The vein was still intact and no inflammatory reactions were observed proving the biocompatibility and biodegradability of the conduit. In conclusion, we have successfully formed a stable living nerve conduit which may serve as a substitute for autologous nerves.

Matched MeSH terms: Tissue Engineering*
Mineral and physichocemical characterization of cockle (Anadara granosa) shells as an alternative biomaterial for bone tissue engineering

Hazmi AJ, Zuki AB, Noordin MM, Jalila A, Norimah Y

Med J Malaysia, 2008 Jul;63 Suppl A:93-4.
PMID: 19025000

This study was conducted based on the hypothesis that mineral and physicochemical properties of cockle shells similarly resemble the properties of corals (Porites sp.). Hence, the mineral and physicochemical evaluations of cockle shells were conducted to support the aforementioned hypothesis. The results indicated that cockle shells and coral exoskeleton shared similar mineral and physicochemical properties.

Matched MeSH terms: Tissue Engineering*
Fulltext Characterization and in vivo study of decellularized aortic scaffolds using closed sonication system

Hazwani A, Sha'Ban M, Azhim A

Organogenesis, 2019;15(4):120-136.
PMID: 31495272 DOI: 10.1080/15476278.2019.1656997

Extracellular matrix (ECM) based bioscaffolds prepared by decellularization has increasingly emerged in tissue engineering application because it has structural, biochemical, and biomechanical cues that have dramatic effects upon cell behaviors. Therefore, we developed a closed sonication decellularization system to prepare ideal bioscaffolds with minimal adverse effects on the ECM. The decellularization was achieved at 170 kHz of ultrasound frequency in 0.1% and 2% Sodium Dodecyl Sulphate (SDS) solution for 10 hours. The immersion treatment as control was performed to compare the decellularization efficiency with our system. Cell removal and ECM structure were determined by histological staining and biochemical assay. Biomechanical properties were investigated by the indentation testing to test the stiffness, a residual force and compression of bioscaffolds. Additionally, in vivo implantation was performed in rat to investigate host tissue response. Compared to native tissues, histological staining and biochemical assay confirm the absence of cellularity with preservation of ECM structure. Moreover, sonication treatment has not affected the stiffness [N/mm] and a residual force [N] of the aortic scaffolds except for compression [%] which 2% SDS significantly decreased compared to native tissues showing higher SDS has a detrimental effect on ECM structure. Finally, minimal inflammatory response was observed after 1 and 5 weeks of implantation. This study reported that the novelty of our developed closed sonication system to prepare ideal bioscaffolds for tissue engineering applications.

Matched MeSH terms: Tissue Engineering/methods*
A scanning electron microscopic study of in vivo tissue engineered respiratory epithelium in sheep

Heikal MY, Aminuddin BS, Jeevanan J, Chen HC, Sharifah S, Ruszymah BH

Med J Malaysia, 2008 Jul;63 Suppl A:34.
PMID: 19024970

Normal tracheal mucociliary clearance is the key to maintaining the health and defense of respiratory airway. Therefore the present of cilia and mucous blanket are important for tracheal epithelium to function effectively. In the present study, we prepared a tissue engineered respiratory epithelium construct (TEREC) made of autologous respiratory epithelium cells, fibroblast and fibrin from sheep owns blood which replaced a created tracheal mucosal defect. Scanning electron microscopy (SEM) showed encouraging result where immature cilia were present on the surface of TEREC. This result indicates that engineered respiratory epithelium was able to function as normal tissue.

Matched MeSH terms: Tissue Engineering*
Fulltext EphrinB2 signalling modulates the neural differentiation of human dental pulp stem cells

Heng BC, Gong T, Xu J, Lim LW, Zhang C

Biomed Rep, 2018 Aug;9(2):161-168.
PMID: 29963307 DOI: 10.3892/br.2018.1108

Dental pulp stem cells (DPSCs) originate from the embryonic neural crest and have neurogenic potential. The present study investigated the roles of the forward and reverse EphrinB2 signalling pathways during DPSC neurogenesis. Treatment of DPSCs with recombinant EphrinB2-Fc protein over 7 days in a neural induction culture resulted in significant downregulation of the following neural markers: βIII-Tubulin, neural cell adhesion molecule (NCAM), nestin, neurogenin 2 (NGN2), neurofilament medium polypeptide and Musashi1. Immunocytochemistry revealed that EphrinB2-Fc-treated DPSCs exhibited more rounded morphologies with fewer neurite outgrowths as well as reduced protein expression of βIII-tubulin and NGN2. Treatment of DPSCs with a peptide inhibitor specific to the EphB4 receptor significantly upregulated expression of the neural markers microtubule-associated protein 2, Musashi1, NGN2 and neuron-specific enolase, whereas treatment with a peptide inhibitor specific to the EphB2 receptor exerted negligible effects on neurogenesis. Transgenic expression of EphrinB2 in DPSCs resulted in significant upregulation of Musashi1 and NCAM gene expression, while treatment of DPSCs with recombinant EphB4-Fc protein led to significant upregulation of only Musashi1. Thus, it may be concluded that stimulation of forward EphrinB2-EphB4 signalling markedly inhibited neurogenesis in DPSCs, whereas suppression of this forward signalling pathway with peptide inhibitor specific to EphB4 promoted neurogenesis. Meanwhile, stimulation of reverse EphB4-EphrinB2 signalling only marginally enhanced the neural differentiation of DPSCs. The present findings indicate the potential application of peptide or small molecule inhibitors of EphrinB2 forward signalling in neural tissue engineering with DPSCs.

Matched MeSH terms: Tissue Engineering
Fulltext The bioelectrical properties of bone tissue

Heng BC, Bai Y, Li X, Meng Y, Lu Y, Zhang X, et al.

Animal Model Exp Med, 2023 Apr;6(2):120-130.
PMID: 36856186 DOI: 10.1002/ame2.12300

Understanding the bioelectrical properties of bone tissue is key to developing new treatment strategies for bone diseases and injuries, as well as improving the design and fabrication of scaffold implants for bone tissue engineering. The bioelectrical properties of bone tissue can be attributed to the interaction of its various cell lineages (osteocyte, osteoblast and osteoclast) with the surrounding extracellular matrix, in the presence of various biomechanical stimuli arising from routine physical activities; and is best described as a combination and overlap of dielectric, piezoelectric, pyroelectric and ferroelectric properties, together with streaming potential and electro-osmosis. There is close interdependence and interaction of the various electroactive and electrosensitive components of bone tissue, including cell membrane potential, voltage-gated ion channels, intracellular signaling pathways, and cell surface receptors, together with various matrix components such as collagen, hydroxyapatite, proteoglycans and glycosaminoglycans. It is the remarkably complex web of interactive cross-talk between the organic and non-organic components of bone that define its electrophysiological properties, which in turn exerts a profound influence on its metabolism, homeostasis and regeneration in health and disease. This has spurred increasing interest in application of electroactive scaffolds in bone tissue engineering, to recapitulate the natural electrophysiological microenvironment of healthy bone tissue to facilitate bone defect repair.

Matched MeSH terms: Tissue Engineering
Approaches to deriving Schwann cells from human bone marrow for neural tube regeneration in a clinical setting

Hidayah HN, Mazzre M, Ng AM, Ruszymah BH, Shalimar A

Med J Malaysia, 2008 Jul;63 Suppl A:39-40.
PMID: 19024973

Bone marrow derived Mesenchymal stem cells (MSCs) were evaluated as an alternative source for tissue engineering of peripheral nerves. Human MSCs were subjected to a series of treatment with a reducing agent, retinoic acid and a combination of trophic factors. This treated MSCs differentiated into Schwann cells were characterized in vitro via flow cytometry analysis and immunocytochemically. In contrast to untreated MSCs, differentiated MSCs expressed Schwann cell markers in vitro, as we confirmed by flow cytometry analysis and immunocytochemically. These results suggest that human MSCs can be induced to be a substitute for Schwann cells that may be applied for nerve regeneration since it is difficult to grow Schwann cells in vitro.

Matched MeSH terms: Tissue Engineering*
The Advancement of Biomaterials in Regulating Stem Cell Fate

Hiew VV, Simat SFB, Teoh PL

Stem Cell Rev Rep, 2018 Feb;14(1):43-57.
PMID: 28884292 DOI: 10.1007/s12015-017-9764-y

Stem cells are well-known to have prominent roles in tissue engineering applications. Embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs) can differentiate into every cell type in the body while adult stem cells such as mesenchymal stem cells (MSCs) can be isolated from various sources. Nevertheless, an utmost limitation in harnessing stem cells for tissue engineering is the supply of cells. The advances in biomaterial technology allows the establishment of ex vivo expansion systems to overcome this bottleneck. The progress of various scaffold fabrication could direct stem cell fate decisions including cell proliferation and differentiation into specific lineages in vitro. Stem cell biology and biomaterial technology promote synergistic effect on stem cell-based regenerative therapies. Therefore, understanding the interaction of stem cell and biomaterials would allow the designation of new biomaterials for future clinical therapeutic applications for tissue regeneration. This review focuses mainly on the advances of natural and synthetic biomaterials in regulating stem cell fate decisions. We have also briefly discussed how biological and biophysical properties of biomaterials including wettability, chemical functionality, biodegradability and stiffness play their roles.

Matched MeSH terms: Tissue Engineering/methods*
Fetal surgery and stem cell therapy for meningomyelocele

Hii LY, Sung CA, Shaw SW

Curr Opin Obstet Gynecol, 2020 04;32(2):147-151.
PMID: 32004173 DOI: 10.1097/GCO.0000000000000614

PURPOSE OF REVIEW: To review the advance of maternal--fetal surgery, the research of stem cell transplantation and tissue engineering in prenatal management of fetal meningomyelocele (fMMC).
RECENT FINDINGS: Advance in the imaging study provides more accurate assessment of fMMC in utero. Prenatal maternal--fetal surgery in fMMC demonstrates favourable postnatal outcome. Minimally invasive fetal surgery minimizes uterine wall disruption. Endoscopic fetal surgery is performed via laparotomy-assisted or entirely percutaneous approach. The postnatal outcome for open and endoscopic fetal surgery shares no difference. Single layer closure during repair of fMMC is preferred to reduce postnatal surgical intervention. All maternal--fetal surgeries impose anesthetic and obstetric risk to pregnant woman. Ruptured of membrane and preterm delivery are common complications. Trans-amniotic stem cell therapy (TRASCET) showed potential tissue regeneration in animal models. Fetal tissue engineering with growth factors and dura substitutes with biosynthetic materials promote spinal cord regeneration. This will overcome the challenge of closure in large fMMC. Planning of the maternal--fetal surgery should adhere to ethical framework to minimize morbidity to both fetus and mother.
SUMMARY: Combination of endoscopic fetal surgery with TRASCET or tissue engineering will be a new vision to achieve to improve the outcome of prenatal intervention in fMMC.

Matched MeSH terms: Tissue Engineering
Design and fabrication of scaffolds for anatomic bone reconstruction

Hollister SJ, Lin CY, Lin CY, Schek RD, Taboas JM, Flanagan CL, et al.

Med J Malaysia, 2004 May;59 Suppl B:131-2.
PMID: 15468853
Matched MeSH terms: Tissue Engineering/methods*
Extrusion based rapid prototyping technique: an advanced platform for tissue engineering scaffold fabrication

Hoque ME, Chuan YL, Pashby I

Biopolymers, 2012 Feb;97(2):83-93.
PMID: 21830198 DOI: 10.1002/bip.21701

Advances in scaffold design and fabrication technology have brought the tissue engineering field stepping into a new era. Conventional techniques used to develop scaffolds inherit limitations, such as lack of control over the pore morphology and architecture as well as reproducibility. Rapid prototyping (RP) technology, a layer-by-layer additive approach offers a unique opportunity to build complex 3D architectures overcoming those limitations that could ultimately be tailored to cater for patient-specific applications. Using RP methods, researchers have been able to customize scaffolds to mimic the biomechanical properties (in terms of structural integrity, strength, and microenvironment) of the organ or tissue to be repaired/replaced quite closely. This article provides intensive description on various extrusion based scaffold fabrication techniques and review their potential utility for TE applications. The extrusion-based technique extrudes the molten polymer as a thin filament through a nozzle onto a platform layer-by-layer and thus building 3D scaffold. The technique allows full control over pore architecture and dimension in the x- and y- planes. However, the pore height in z-direction is predetermined by the extruding nozzle diameter rather than the technique itself. This review attempts to assess the current state and future prospects of this technology.

Matched MeSH terms: Tissue Engineering/methods*; Tissue Engineering/trends
Processing of polycaprolactone and polycaprolactone-based copolymers into 3D scaffolds, and their cellular responses

Hoque ME, San WY, Wei F, Li S, Huang MH, Vert M, et al.

Tissue Eng Part A, 2009 Oct;15(10):3013-24.
PMID: 19331580 DOI: 10.1089/ten.TEA.2008.0355

Synthetic polymers have attracted much attention in tissue engineering due to their ability to modulate biomechanical properties. This study investigated the feasibility of processing poly(epsilon-caprolactone) (PCL) homopolymer, PCL-poly(ethylene glycol) (PEG) diblock, and PCL-PEG-PCL triblock copolymers into three-dimensional porous scaffolds. Properties of the various polymers were investigated by dynamic thermal analysis. The scaffolds were manufactured using the desktop robot-based rapid prototyping technique. Gross morphology and internal three-dimensional structure of scaffolds were identified by scanning electron microscopy and micro-computed tomography, which showed excellent fusion at the filament junctions, high uniformity, and complete interconnectivity of pore networks. The influences of process parameters on scaffolds' morphological and mechanical characteristics were studied. Data confirmed that the process parameters directly influenced the pore size, porosity, and, consequently, the mechanical properties of the scaffolds. The in vitro cell culture study was performed to investigate the influence of polymer nature and scaffold architecture on the adhesion of the cells onto the scaffolds using rabbit smooth muscle cells. Light, scanning electron, and confocal laser microscopy showed cell adhesion, proliferation, and extracellular matrix formation on the surface as well as inside the structure of both scaffold groups. The completely interconnected and highly regular honeycomb-like pore morphology supported bridging of the pores via cell-to-cell contact as well as production of extracellular matrix at later time points. The results indicated that the incorporation of hydrophilic PEG into hydrophobic PCL enhanced the overall hydrophilicity and cell culture performance of PCL-PEG copolymer. However, the scaffold architecture did not significantly influence the cell culture performance in this study.

Matched MeSH terms: Tissue Engineering/methods*
An endeavour from porous to 3D constructs bioceramics

Idris B, Rusnah M, Reusmaazran YM, Rohaida CH

Med J Malaysia, 2004 May;59 Suppl B:67-8.
PMID: 15468822
Matched MeSH terms: Tissue Engineering/methods*

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links