Automobile exhaust emission control is one of the trending issues in automobile research field. It caused by high
pollution such as carbon monoxide (CO), nitrogen oxides (NOx), and hydrocarbons (HC) distributed by automobile
especially form diesel engine. These pollutants give a harmful effect to the environment and human health. Therefore,
this paper proposed in reviewing methods on fabrication of modified catalytic converter. FeCrAl is used as substrate
which treated using ultrasonic bath technique which could improve the exhaust emission control. This metallic catalytic converter used as the replacement of precious metal that have high production cost.
The frequency of occupational accident in small medium industries decreased from 2008 in general, but fluctuated each year,
which shows that improvement is needed in handling safety and health of the employees. It is believed that safety climate perception
and occupational safety health management system (OSHMS) influence occupational accident in an organization. A safety audit
checklist and self-administered questionnaire was distributed to the involved small medium industries. The findings show that safety
climate perception was high in small medium industries while OSHMS show low compliance. Findings also showed that there were
significant relationships between safety climate perception and OSHMS with occupational accident in the organizations (p
The aim of this paper is to identify, review and carry out comparison to seven guidelines where the main focus is on its risk
assessment elements related to confined space activities. This is due to lack of the specific approach of the Legislation for confined
space such as entry procedure requirements, risk assessment method, existing practice of risk assessment is too general and additional
references are required for conducting risk assessment which would lead to poor response from industries. The selected guidelines will
be summarized on its requirements, followed by a review of each guideline and finally the comparison of Legislations will be carried
out. The results from the study would be used as a contribution factor to promote an ideal method in developing an effective risk
assessment tools for working safely in confined space. Furthermore, several literatures which have been referred could give additional
input for developing the risk assessment tools.
This study illustrates about the most hazardous and risky activities associated with well drilling operation at on and offshore
oil and gas drilling sites by adopting exploratory research design (quantitative leading to qualitative). In this study researcher has
targeted three oil and gas industries each from Malaysia, Saudi Arabia and Pakistan for the identification of associated hazards
and nature of hazardous activities faced by drilling crew during well drilling operation. Eighty (80) drilling crew members have
been randomly selected for answering the survey questionnaire. Likewise, nine (09) drilling health and safety officials have been
conveniently selected based on their safety expertise in oil and gas drilling field for semi structured in-depth interview. For analyzing
quantitative findings descriptive statistical methods has been used. While for qualitative section thematic analysis approach has
been utilized. Based on the findings, respondents from Malaysian oil and gas industries reported starting drilling activity as highly
hazardous at onshore well drilling, while handling drilling pipe has been considered more hazardous activity at offshore domain.
Similarly, in the context of Saudi Arabia, respondents highlighted that the handling drilling pipes are cause of major injuries at onshore
well drilling site. Whereas drilling fluid preparation and coring process is considered harmful at offshore sites. In contrast, participant
from Pakistan indicated coring process as a highly hazardous activity at on and offshore well drilling operation. According to overall
results based on the participant response, oil and gas well drilling operation at onshore domain is considered more hazardous
at Pakistani oil and gas industry as compare to other targeted industries with mean range 3.42. While for offshore well drilling,
Malaysian industry is recorded highly hazardous as compare to others leading with mean value 3.39 and related with chemical and
safety hazards in well drilling activities.
This study aims to investigate a visual status and prevalence of visual problems in relation to eye safety and health amongst
visual display terminal (VDT) users in industries. A visual profile questionnaire (VPQ) and visual tests were conducted on workers
from 9 type of industries aged 20 to 60 years old in between October 2015 and June 2016. Workers with a history of exposure to VDT
more than 2 hours a day were used as a baseline for recruitment. Respondents who did not complete the visual profile questionnaires
(VPQ) and visual tests were excluded from the study. A total of 1214 respondents with mean aged of 39.33 ± 9.80 years have completed
the study. Most respondents show moderate to high in vision problems in related to VDT, low knowledge on visual hazards and policy
in relation to eye safety and health at the workplace and high percentage of not getting proper eye tests while serving their industries.
Visual Profile (VP) is needed as a key indicator to profile eye safety measures and the need for policy to help prevent eye problems and
improve employees’ productivity at workplace.
An awareness of possible risk factor in pesticides, by changing attitude towards the correct technique during spraying and
changing behavior can increase safety of workers safety as well as performance. However, there is a limited study and not highlighted
deeply in knowledge, attitude and practices of workers in palm oil plantation issue. Therefore , the objective of this paper is to identify
the relationship between knowledge, attitude and practices of pesticides among the plantation workers. The quantitative method were
used in this paper whereby 132 respondents as pesticide sprayer which represent 90% of the population of palm oil workers in Johor.
The result of spearman correlation indicates that there is significant relationship between knowledge and practices. It shows the
common pattern of high knowledge resulting high practices of the workers during spraying the pesticides at plantation. There is no
relationship between knowledge and attitude and between attitude and practice of the workers at the workplace. This paper shows that
knowledge need to be strengthen in agricultural communities of Johor in order to reduce health problem and sosial issue statistic and
prevent for any future accident. Human exposure to pesticides is an important health and sosial issue as it usually results in serious
health problems such as stroke, epilepsy, respiratory disorders and cancer. Death has been known to occur in some places as a result
of exposures to pesticides. Therefore, more impact knowledge-focused programs need to be arranged and implemented to inculcate
the better awareness of pesticides among palm oil workers, as without knowledge, people may become less careful and therefore are
exposed to pesticide poisoning and other long term exposure illness in the future.
Geographically, Malaysia is situated in the equatorial region, thus having a climate of hot and humid throughout the
year. Effect of heat stress and physical work load at construction industry need to be investigated because of the high number of
accidents. Thus, perception of physical workload and heat stress by the construction workers in Malaysia needed to be investigated
and documented. The aim of this paper is to establish a set of questionnaires containing the item generation regarding on physical
workload and the heat stress perception of construction workers. Physical workload factors such as fatigue, risks, concentration,
work rhythm, responsibility, satisfaction, and autonomy are inserted as the items in assessing the physical workload. While heat
stress are assessed using heat risk factors such as temperature, humidity, heat radiation, air movement, workload, clothing and
acclimatisation. A questionnaire has been developed resulted from various reviewing of literatures on physical workload and heat
stress and better suited to the Malaysia working environment.
In the electronic industry, prolonged standing works are sometimes required continuously for hours. The physical efforts
required lead to physiological and psychological fatigue resulting in reduced muscle performance. In order to recover from the muscle
exertion, one of the solutions is through the administrative control of a suitable work-rest schedule. In this study, two different workrest
conditions with identical total break time were investigated. An experiment was carried out when ten males’ workers were used
in each condition. The perception of the operator regarding to the body part discomfort were carried out by exploratory survey. Then,
Electromyography (EMG) was used to record the muscle fatigue of the participating workers throughout the experiment. Results
indicate infrequent-long rest promotes lesser muscle efforts compared to frequent short. The frequent short rest for 5 minutes (2X5
minutes) at first half of working day was not adequate to promote reduction on muscle fatigue. It was recommended that in order to
ensure adequate muscle recovery, a more frequent rest of more than 2 times at the half of day, and more than 5 minutes for each rest
should be given to workers.
The construction industry is one of the largest sectors in Malaysia. This industry has become one of the main contributors
for national economic development and consistently contributes 3% to 5% to the national Gross Domestic Product (GDP). This
sector has also opened up job opportunities for various levels of employment. High demands and rapid urbanization offer huge
opportunities for registered contractors. Despite contributing in enhancing national economics, this sector has been regarded as one
of the most dangerous and hazardous workplaces due to the type of nature and the job activities at construction sites. According to
the International Labour Organization (ILO), 2.3 million fatalities related to occupational accidents and illnesses are estimated to
occur each year. Furthermore, 4 percent of world GDP is estimated to be lost due to occupational accidents and illnesses. The number
of fatality accidents in the construction industry was the highest with 652 cases of non-permanent disability (NPD) and permanent
disability (PD) accidents in the period 2007 to 2015, equivalent to 72.44 cases per year and representing 48.77% of the construction
industry. The huge gap between the number of accidents reported to SOCSO and DOSH becomes a major concern due to a rising
number of underreported cases of fatalities and injury in the construction sector, especially those involving foreign labour. The margin
between accidents reported to SOCSO and DOSH is 97.49%. Regards to rapid developments, safety measures to improve performance
management of OSH should be emphasized to reduce losses of life, property and productivity.
Workplace accident is still prevalent in the Malaysian industry sector. Although statistics indicates that the number of
accidents in the workplace is showing signs of decrease over the last five years, there is still room for improvements. According to
report, a majority of the workplace accidents in Malaysia happened in Small and Medium Enterprise (SME). This shows that SME is
still lagging behind in ensuring the safety of their workplace. This can disrupt their business activities as workplace accidents bring
several negative effects. Therefore, this study explores the use of safety training to foster safety behaviour among employees. Surveys
were distributed to employees working in SME, Northern Corridor of Economic Region (NCER). The data was analysed and results
were presented. Suggestions to management in SME are made at the end of the paper.
This is a cross-sectional study with the objective to determine the association between complaints Musculoskeletal Disorders
(MSDs) and mismatch of the seats in lecture hall of Faculty of Medicine and Health Sciences (FMHS), Universiti Putra Malaysia
(UPM). A total of 132 respondents whom were undergraduate students were involved in this study consist of 47 male and 85 female.
Eight anthropometric measurement (height, weight, popliteal height, buttock-popliteal height, shoulder height, subscapular height,
elbow height and hip width while sitting) as well as five (5) furniture parameter dimensions (seat height, seat depth, seat width,
upper edge backrest height and desk height) were taken. Instruments used were questionnaire modified from Nordic Musculoskeletal
Questionnaire, Martyn anthropometer set, measuring tape, height scale and weighing scale. Findings showed 51.5% mismatch of
seat height, 5.3% mismatch of seat depth, 94.7% mismatch of desk height and 18.2% mismatch of upper edge of back rest. For the
prevalence MSDs in the past seven (7) days, 61.4% reported low back pain followed by neck pain (50%) and upper back pain (43.9%).
There was significant difference between genders in anthropometric body measurement. Significant association were found between
MSDs and mismatch χ2 = 5.406, p < 0.05. In conclusion, there was an association between MSDs and ergonomics furniture of lecture
halls in FMHS, UPM. Based on the findings, it is recommended that in the event of long lecture hour, intermittent break should be
allowed for students to stretch, move or better yet assume different posture such as standing or walk.
Introduction: Workers in hospitals are exposed to various occupational hazards such as high level disinfectants (HLD).
Disinfection is an essential component of the endoscope reprocessing. In the Endoscopy Unit of Queen Elizabeth Hospital,
Succindialdehyde (SA) is used as the disinfectant for endoscope reprocessing. SA has properties that are similar to formaldehyde
in regard to contact allergies and toxicity. The purpose of this case study is to describe the occurrence of work related symptoms
(WRS), the proper use of personal protective attire (PPE) and the need of pre-employment health enquiries for those exposed to SA.
Methodology: This was a cross sectional case study. Twenty eight gastrointestinal assistants (GIA) from the thirty two exposed staff
working with the Queen Elizabeth Hospital’s Endoscopy Unit, who fulfilled the study criteria, were given a modified Respiratory
Surveillance Questionnaire. This questionnaireis used as the health surveillance tool for the staff exposed to the occupational
respiratory hazard by the Occupational Health Unit, University of Edinburgh. Results: Most of the GIAs complained of headache
(85.7%), skin irritations (60.7%) followed by 57.1% watery eyes, wheeziness and runny nose. Majority (92.9%) of the GIAs wore
personal protective equipment (PPE) during the disinfection procedure. Pre-employment enquiries regarding asthma, skin and
mucosal sensitivity problems and lung function were not made to any of the GIAs. Only 14.3% of them do annual health surveillances.
Conclusion: Most of the GIAs, 92.9% experienced at least one WRS despite wearing PPE. Staff exposed to the chemical disinfectants
should wear proper PPE and do annual health surveillances. By practising this, we may avoid WRS and treat the staff accordingly.
Construction industry is one of the major contributors towards Malaysian economy and socio-economy. It is an important
industry gearing Malaysia towards developed nation status. However, fatalities in this industry are a crucial problem. Number of
fatalities in this industry is the highest compare to other industries registered in Malaysia. The contributing factors can be separated
into immediate (human and worksite elements) and underlying (management and external). Occupational safety and health (OSH)
management is a challenge in the construction industry due to its hazardous nature. A framework of construction OSH management
consisting of policy, process, personnel and incentive elements were tested. 13 respondents from 13 residential projects comprising of
high-rise and low-rise in Pulau Pinang were interviewed. It was found that the immediate factors are being more recognized by the
respondents compare to the underlying factors. Human element is perceived as the most significant contributor, while the external
element is the least significant. In terms of construction OSH management, process and personnel elements are the most significant in
developing an effective OSH management programme.
Pineapple plantation workers are exposed to strenuous physical activities. This study aims to determine the prevalence
of musculoskeletal symptoms (MSS), analyse the body postural risks related to work tasks and identify relevant MSS risk factors
among pineapple plantation workers. This was a cross-sectional study performed at a pineapple plantation in Johor in 2016. MSS,
information on socio-demographic background and occupational history were collected via structured questionnaires. Identification
and risk assessment of ergonomic hazard and postural risk analysis were performed for a subset of workers. Data were entered into
statistical software and analyse according to relevant objectives. A total of 108 workers participated in this study. The prevalence
of MSS was 87.0% and was highest for the lower back (64.8%). In terms of ergonomic hazards, Harvesting were categorised as a
task with the highest risk. Harvesting was also the task with the highest postural risk. From the multivariate analysis, lower back
pain is mainly contributed by a working tenure of 10 to 25 years (Odds Ratio, OR: 3.90; 95% Confidence Interval, CI 1.05-14.4) and
more than 25 years (OR: 7.45 (95% CI 1.26 to 44.0). Workers who worked more than 7-hour daily have a higher risk for reporting
lower back pain. Pineapple plantation workers are exposed to excessive bending, twisting and carrying of heavy loads that may be
linked to MSS. Effective preventive strategies are required to address MSS in this population in order to minimize risk for subsequent
musculoskeletal disorders.
Local Exhaust Ventilation (LEV) is required to absorbed the chemical and at the same time to maintain the air quality. This
study is purposed to create new design of LEV system that believe can remove air contaminants in the chemical store buildings. This
research was conducted using two (2) types of LEV system which are 4 air-inlets LEV (type 1) and 3 air-inlets LEV (type 2). That LEV
has been simulated using ANSYS FLUENT software for their air flow performances. LEV material and the cost of production were
considered parameter for fabricating and effectiveness of LEV system. Results show that air velocity in LEV type 1 was gradually
uniform throughout its ducting network but it increased at the 90º bend section with a maximum air velocity of 31.054 m/s. In the LEV
type 2, the air flow simulations depicted uniformity velocity values of 8.12 m/s, 8.58 m/s and 7.69 m/s at every inlet respectively. The
finding suggests that LEV type 2 was more efficient compared to LEV type 1 due to increasing streamline air velocity.
A cross sectional study was conducted among tea plantation workers in Cameron Highlands from July to December 2006 to study the prevalence of low back pain and factors associated with it. One hundred and six tea plantation field workers participated in the study. Data was collected using self-administered questionnaire. Time motion studies were also conducted for 3 different job categories. The prevalence of back pain experienced throughout their work in the plantation was 81.1% and the prevalence of low
back pain experienced in the past 12 months was 64.2%. Feeling the need to work as fast as possible was a significant predictor of low back pain and increased the risk by 3.5 times, therefore it is suggested that both the management and workers give serious attention to this particular aspect to reduce the incidence of low back pain.
Computer work is common at shared service centres and employees are exposed to risk of musculoskeletal symptoms.
Although employees at this service centre had already been advised to complete an ergonomics self assessment using a checklist and
consult an occupational health doctor if symptomatic, almost half participants responded they were either unaware or unsure of the
company’s ergonomics self assessment checklist and all did not mention consulting an occupational health doctor if symptomatic.Most
participants had at least one musculoskeletal symptom. The main location of musculoskeletal symptom reported was shoulder, neck
and lower back. This was consistent with main location of musculoskeletal symptoms reported due to work which were shoulder, neck
and lower back. Most of the musculoskeletal symptoms affected wellbeing at work and almost half were at least moderately severe.
The incorrect posture often observed were: upper arm not close to body, shoulder not relaxed and hand not in-line with forearm..
The musculoskeletal symptoms reported were consistent with observation of incorrect posture. There is an urgent need to enhance the
effectiveness of the ergonomics program at this service centre.
The cultivation of indoor plants in indoor environment has become a topic of interest among researchers worldwide for its
potential to improve indoor air quality (IAQ). However, the adaptations of environmental factor of each plant need to be investigated
to correspond with the native environment. The study investigate the capability of plants selected to live indoor. Before experiment was
conducted, all plants selected were assimilated with indoor environment for two months. Photosynthesis proses in this experiment will
be a guidance to determine the comparative for every plant. The portable photosynthesis system equipment (LI-COR 6400) was used to
determine the level of photosynthesis rate for each of plants. Accordingly, among of all plants tested, Spider Plant showed less effective
to be grown with indoor environment by the rate of photosynthesis value up to -0.15. Moreover, light compensation point (LCP) of
Spider Plant also indicated the light intensity consumption was 2960 lux which is extremely higher than 300 lux. As a conclusion, only
six plants in this study which are Anthurium, Dumb Cane, Golden Pothos, Kadaka Fern, Prayer Plant, and Syngonium are able to
survive with indoor environment. In the next stage of study, this six plants may give good results to enhance the IAQ.
Indoor air quality (IAQ) can be described as the quality of air weather inside or surrounding the buildings and structures
which are associated with the health and comfort ability of occupants in the buildings. The level of IAQ in buildings can be influenced
by microbial contaminants activities, chemicals exposure and allergens that seriously can create health effects to the building’s
occupants. In the present study, the effect of environmental factors such as temperature and relative humidity on the optimum growth
of Aspergillus niger (A. niger) was investigated. The study revealed that the optimal fungal growth of up 43mm in diameter was
evidenced under room temperature of 30oC at the end of a five day incubation period. However, the relative humidity from 40% to 90%
applied is able to support the growth of the A.niger. The relative humidity of 90% shows the optimal effect where 56 mm of diameter
growth happened after 5 days of incubation. The significant finding to emerge from this study is that environmental factors such as
temperature and relative humidity do affect the growth of A.niger. The optimal temperature and relative humidity for A.niger to grow
are 30oC and 90%, respectively.
Concerns toward Indoor Air Quality (IAQ) in office building tend to risen since most people spend their working hours
indoors compare to outdoors. Exposure to indoor pollutants is a considerable problem. Therefore, there is a need to monitor IAQ in
order to deter further air quality deterioration in the workplace. The objective of this study is to determine the level of IAQ parameter
in selected academic office. The important IAQ parameters considered in this study were the air temperature, air velocity, relative
humidity, CO2, CO, TVOC, formaldehyde and respirable particulate matter. Measurements were conducted using commercial IAQ
instruments. From the study it was found that the levels of TVOC and respirable particulate matter were higher than the recommended
limit during photocopying activities. The formaldehyde, CO2 and CO level were observed to be acceptable for an office based on
Industry code of practice on indoor air quality (ICOP-IAQ 2010). Results shows that the temperature and air velocity are located at
acceptable value of 22-25 ºC and 0.1-0.1 m/s. Findings also show high relative humidity that exceeded the requirement level of 40%-
70%. Detail investigations are needed in order to provide certain guidance in improvement of IAQ conditions in office environment.