Displaying publications 1 - 20 of 28 in total

Abstract:
Sort:
  1. Redmond DP, Chiew YS, Major V, Chase JG
    Comput Methods Programs Biomed, 2019 Apr;171:67-79.
    PMID: 27697371 DOI: 10.1016/j.cmpb.2016.09.011
    Monitoring of respiratory mechanics is required for guiding patient-specific mechanical ventilation settings in critical care. Many models of respiratory mechanics perform poorly in the presence of variable patient effort. Typical modelling approaches either attempt to mitigate the effect of the patient effort on the airway pressure waveforms, or attempt to capture the size and shape of the patient effort. This work analyses a range of methods to identify respiratory mechanics in volume controlled ventilation modes when there is patient effort. The models are compared using 4 Datasets, each with a sample of 30 breaths before, and 2-3 minutes after sedation has been administered. The sedation will reduce patient efforts, but the underlying pulmonary mechanical properties are unlikely to change during this short time. Model identified parameters from breathing cycles with patient effort are compared to breathing cycles that do not have patient effort. All models have advantages and disadvantages, so model selection may be specific to the respiratory mechanics application. However, in general, the combined method of iterative interpolative pressure reconstruction, and stacking multiple consecutive breaths together has the best performance over the Dataset. The variability of identified elastance when there is patient effort is the lowest with this method, and there is little systematic offset in identified mechanics when sedation is administered.
  2. Langdon R, Docherty PD, Chiew YS, Chase JG
    Math Biosci, 2017 02;284:32-39.
    PMID: 27513728 DOI: 10.1016/j.mbs.2016.08.001
    For patients with acute respiratory distress syndrome (ARDS), mechanical ventilation (MV) is an essential therapy in the intensive care unit (ICU). Suboptimal PEEP levels in MV can cause ventilator induced lung injury, which is associated with increased mortality, extended ICU stay, and high cost. The ability to predict the outcome of respiratory mechanics in response to changes in PEEP would thus provide a critical advantage in personalising and improving care. Testing the potentially dangerous high pressures would not be required to assess their impact. A nonlinear autoregressive (NARX) model was used to predict airway pressure in 19 data sets from 10 mechanically ventilated ARDS patients. Patient-specific NARX models were identified from pressure and flow data over one, two, three, or four adjacent PEEP levels in a recruitment manoeuvre. Extrapolation of NARX model elastance functions allowed prediction of patient responses to PEEP changes to higher or lower pressures. NARX model predictions were more successful than those using a well validated first order model (FOM). The most clinically important results were for extrapolation up one PEEP step of 2cmH2O from the highest PEEP in the training data. When the NARX model was trained on one PEEP level, the mean RMS residual for the extrapolation PEEP level was 0.52 (90% CI: 0.47-0.57) cmH2O, compared to 1.50 (90% CI: 1.38-1.62) cmH2O for the FOM. When trained on four PEEP levels, the NARX result was 0.50 (90% CI: 0.42-0.58) cmH2O, and was 1.95 (90% CI: 1.71-2.19) cmH2O for the FOM. The results suggest that a full recruitment manoeuvre may not be required for the NARX model to obtain a useful estimate of the pressure waveform at higher PEEP levels. The methodology could thus allow clinicians to make informed decisions about ventilator PEEP settings while reducing the risk associated with high PEEP, and subsequent high peak airway pressures.
  3. Major VJ, Chiew YS, Shaw GM, Chase JG
    Biomed Eng Online, 2018 Nov 12;17(1):169.
    PMID: 30419903 DOI: 10.1186/s12938-018-0599-9
    BACKGROUND: Mechanical ventilation is an essential therapy to support critically ill respiratory failure patients. Current standards of care consist of generalised approaches, such as the use of positive end expiratory pressure to inspired oxygen fraction (PEEP-FiO2) tables, which fail to account for the inter- and intra-patient variability between and within patients. The benefits of higher or lower tidal volume, PEEP, and other settings are highly debated and no consensus has been reached. Moreover, clinicians implicitly account for patient-specific factors such as disease condition and progression as they manually titrate ventilator settings. Hence, care is highly variable and potentially often non-optimal. These conditions create a situation that could benefit greatly from an engineered approach. The overall goal is a review of ventilation that is accessible to both clinicians and engineers, to bridge the divide between the two fields and enable collaboration to improve patient care and outcomes. This review does not take the form of a typical systematic review. Instead, it defines the standard terminology and introduces key clinical and biomedical measurements before introducing the key clinical studies and their influence in clinical practice which in turn flows into the needs and requirements around how biomedical engineering research can play a role in improving care. Given the significant clinical research to date and its impact on this complex area of care, this review thus provides a tutorial introduction around the review of the state of the art relevant to a biomedical engineering perspective.

    DISCUSSION: This review presents the significant clinical aspects and variables of ventilation management, the potential risks associated with suboptimal ventilation management, and a review of the major recent attempts to improve ventilation in the context of these variables. The unique aspect of this review is a focus on these key elements relevant to engineering new approaches. In particular, the need for ventilation strategies which consider, and directly account for, the significant differences in patient condition, disease etiology, and progression within patients is demonstrated with the subsequent requirement for optimal ventilation strategies to titrate for patient- and time-specific conditions.

    CONCLUSION: Engineered, protective lung strategies that can directly account for and manage inter- and intra-patient variability thus offer great potential to improve both individual care, as well as cohort clinical outcomes.

  4. Wong JW, Chiew YS, Desaive T, Chase JG
    IFAC Pap OnLine, 2021;54(15):121-126.
    PMID: 38620762 DOI: 10.1016/j.ifacol.2021.10.242
    Surges of COVID-19 infections could lead to insufficient supply of mechanical ventilators, and rationing of needed care. Multiplexing mechanical ventilators (co-MV) to serve multiple patients is a potential temporary solution. However, if patients are ventilated in parallel ventilation, there is currently no means to match ventilation requirements or patients, with no guidelines to date for co-MV. This research uses patient-specific clinically validated respiratory mechanics models to propose a method for patient matching and mechanical ventilator settings for two-patient co-MV under pressure control mode. The proposed method can simulate and estimate the resultant tidal volume of different combinations of co-ventilated patients. With both patients fulfilling the specified constraint under similar ventilation settings, the actual mechanical ventilator settings for co-MV are determined. This method allows clinicians to analyze in silico co-MV before clinical implementation.
  5. Wong JW, Chiew YS, Desaive T, Chase JG
    Biomed Eng Online, 2022 Feb 09;21(1):11.
    PMID: 35139858 DOI: 10.1186/s12938-022-00983-y
    BACKGROUND: Surges of COVID-19 infections have led to insufficient supply of mechanical ventilators (MV), resulting in rationing of MV care. In-parallel, co-mechanical ventilation (Co-MV) of multiple patients is a potential solution. However, due to lack of testing, there is currently no means to match ventilation requirements or patients, with no guidelines to date. In this research, we have developed a model-based method for patient matching for pressure control mode MV.

    METHODS: The model-based method uses a single-compartment lung model (SCM) to simulate the resultant tidal volume of patient pairs at a set ventilation setting. If both patients meet specified safe ventilation criteria under similar ventilation settings, the actual mechanical ventilator settings for Co-MV are determined via simulation using a double-compartment lung model (DCM). This method allows clinicians to analyse Co-MV in silico, before clinical implementation.

    RESULTS: The proposed method demonstrates successful patient matching and MV setting in a model-based simulation as well as good discrimination to avoid mismatched patient pairs. The pairing process is based on model-based, patient-specific respiratory mechanics identified from measured data to provide useful information for guiding care. Specifically, the matching is performed via estimation of MV delivered tidal volume (mL/kg) based on patient-specific respiratory mechanics. This information can provide insights for the clinicians to evaluate the subsequent effects of Co-MV. In addition, it was also found that Co-MV patients with highly restrictive respiratory mechanics and obese patients must be performed with extra care.

    CONCLUSION: This approach allows clinicians to analyse patient matching in a virtual environment without patient risk. The approach is tested in simulation, but the results justify the necessary clinical validation in human trials.

  6. Morton SE, Chiew YS, Pretty C, Moltchanova E, Scarrott C, Redmond D, et al.
    Math Biosci, 2017 02;284:21-31.
    PMID: 27301378 DOI: 10.1016/j.mbs.2016.06.001
    Randomised control trials have sought to seek to improve mechanical ventilation treatment. However, few trials to date have shown clinical significance. It is hypothesised that aside from effective treatment, the outcome metrics and sample sizes of the trial also affect the significance, and thus impact trial design. In this study, a Monte-Carlo simulation method was developed and used to investigate several outcome metrics of ventilation treatment, including 1) length of mechanical ventilation (LoMV); 2) Ventilator Free Days (VFD); and 3) LoMV-28, a combination of the other metrics. As these metrics have highly skewed distributions, it also investigated the impact of imposing clinically relevant exclusion criteria on study power to enable better design for significance. Data from invasively ventilated patients from a single intensive care unit were used in this analysis to demonstrate the method. Use of LoMV as an outcome metric required 160 patients/arm to reach 80% power with a clinically expected intervention difference of 25% LoMV if clinically relevant exclusion criteria were applied to the cohort, but 400 patients/arm if they were not. However, only 130 patients/arm would be required for the same statistical significance at the same intervention difference if VFD was used. A Monte-Carlo simulation approach using local cohort data combined with objective patient selection criteria can yield better design of ventilation studies to desired power and significance, with fewer patients per arm than traditional trial design methods, which in turn reduces patient risk. Outcome metrics, such as VFD, should be used when a difference in mortality is also expected between the two cohorts. Finally, the non-parametric approach taken is readily generalisable to a range of trial types where outcome data is similarly skewed.
  7. Chase JG, Chiew YS, Lambermont B, Morimont P, Shaw GM, Desaive T
    Crit Care, 2020 05 14;24(1):222.
    PMID: 32410701 DOI: 10.1186/s13054-020-02945-z
  8. Chase JG, Chiew YS, Lambermont B, Morimont P, Shaw GM, Desaive T
    Crit Care, 2020 07 10;24(1):415.
    PMID: 32650807 DOI: 10.1186/s13054-020-03152-6
  9. Chiew YS, Pretty CG, Shaw GM, Chiew YW, Lambermont B, Desaive T, et al.
    PMID: 28435689 DOI: 10.1186/s40814-015-0006-2
    BACKGROUND: Selecting positive end-expiratory pressure (PEEP) during mechanical ventilation is important, as it can influence disease progression and outcome of acute respiratory distress syndrome (ARDS) patients. However, there are no well-established methods for optimizing PEEP selection due to the heterogeneity of ARDS. This research investigates the viability of titrating PEEP to minimum elastance for mechanically ventilated ARDS patients.

    METHODS: Ten mechanically ventilated ARDS patients from the Christchurch Hospital Intensive Care Unit were included in this study. Each patient underwent a stepwise PEEP recruitment manoeuvre. Airway pressure and flow data were recorded using a pneumotachometer. Patient-specific respiratory elastance (Ers ) and dynamic functional residual capacity (dFRC) at each PEEP level were calculated and compared. Optimal PEEP for each patient was identified by finding the minima of the PEEP-Ers profile.

    RESULTS: Median Ers and dFRC over all patients and PEEP values were 32.2 cmH2O/l [interquartile range (IQR) 25.0-45.9] and 0.42 l [IQR 0.11-0.87]. These wide ranges reflect patient heterogeneity and variable response to PEEP. The level of PEEP associated with minimum Ers corresponds to a high change of functional residual capacity, representing the balance between recruitment and minimizing the risk of overdistension.

    CONCLUSIONS: Monitoring patient-specific Ers can provide clinical insight to patient-specific condition and response to PEEP settings. The level of PEEP associated with minimum-Ers can be identified for each patient using a stepwise PEEP recruitment manoeuvre. This 'minimum elastance PEEP' may represent a patient-specific optimal setting during mechanical ventilation.

    TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry: ACTRN12611001179921.

  10. Guo P, Chiew YS, Shaw GM, Shao L, Green R, Clark A, et al.
    Intensive Crit Care Nurs, 2016 Dec;37:52-61.
    PMID: 27401048 DOI: 10.1016/j.iccn.2016.05.003
    Monitoring clinical activity at the bedside in the intensive care unit (ICU) can provide useful information to evaluate nursing care and patient recovery. However, it is labour intensive to quantify these activities and there is a need for an automated method to record and quantify these activities. This paper presents an automated system, Clinical Activity Tracking System (CATS), to monitor and evaluate clinical activity at the patient's bedside. The CATS uses four Microsoft Kinect infrared sensors to track bedside nursing interventions. The system was tested in a simulated environment where test candidates performed different motion paths in the detection area. Two metrics, 'Distance' and 'Dwell time', were developed to evaluate interventions or workload in the detection area. Results showed that the system can accurately track the intervention performed by individual or multiple subjects. The results of a 30-day, 24-hour preliminary study in an ICU bed space matched clinical expectations. It was found that the average 24-hour intervention is 22.0minutes/hour. The average intervention during the day time (7am-11pm) is 23.6minutes/hour, 1.4 times higher than 11pm-7am, 16.8minutes/hour. This system provides a unique approach to automatically collect and evaluate nursing interventions that can be used to evaluate patient acuity and workload demand.
  11. Chiew YS, Tan CP, Chase JG, Chiew YW, Desaive T, Ralib AM, et al.
    Comput Methods Programs Biomed, 2018 Apr;157:217-224.
    PMID: 29477430 DOI: 10.1016/j.cmpb.2018.02.007
    BACKGROUND AND OBJECTIVE: Respiratory mechanics estimation can be used to guide mechanical ventilation (MV) but is severely compromised when asynchronous breathing occurs. In addition, asynchrony during MV is often not monitored and little is known about the impact or magnitude of asynchronous breathing towards recovery. Thus, it is important to monitor and quantify asynchronous breathing over every breath in an automated fashion, enabling the ability to overcome the limitations of model-based respiratory mechanics estimation during asynchronous breathing ventilation.

    METHODS: An iterative airway pressure reconstruction (IPR) method is used to reconstruct asynchronous airway pressure waveforms to better match passive breathing airway waveforms using a single compartment model. The reconstructed pressure enables estimation of respiratory mechanics of airway pressure waveform essentially free from asynchrony. Reconstruction enables real-time breath-to-breath monitoring and quantification of the magnitude of the asynchrony (MAsyn).

    RESULTS AND DISCUSSION: Over 100,000 breathing cycles from MV patients with known asynchronous breathing were analyzed. The IPR was able to reconstruct different types of asynchronous breathing. The resulting respiratory mechanics estimated using pressure reconstruction were more consistent with smaller interquartile range (IQR) compared to respiratory mechanics estimated using asynchronous pressure. Comparing reconstructed pressure with asynchronous pressure waveforms quantifies the magnitude of asynchronous breathing, which has a median value MAsyn for the entire dataset of 3.8%.

    CONCLUSION: The iterative pressure reconstruction method is capable of identifying asynchronous breaths and improving respiratory mechanics estimation consistency compared to conventional model-based methods. It provides an opportunity to automate real-time quantification of asynchronous breathing frequency and magnitude that was previously limited to invasively method only.

  12. Othman NA, Docherty PD, Krebs JD, Bell DA, Chase JG
    J Diabetes Sci Technol, 2018 05;12(3):665-672.
    PMID: 29295634 DOI: 10.1177/1932296817750402
    BACKGROUND: Physiological models that are used with dynamic test data to assess insulin sensitivity (SI) assume that the metabolic target glucose concentration ( GTARGET) is equal to fasting glucose concentration ( G0). However, recent research has implied that irregularities in G0 in diabetes may cause erroneous SI values. This study quantifies the magnitude of these errors.

    METHODS: A clinically validated insulin/glucose model was used to calculate SI with the standard fasting assumption (SFA) G0 = GTARGET. Then GTARGET was treated as a variable in a second analysis (VGT). The outcomes were contrasted across twelve participants with established type 2 diabetes mellitus that were recruited to take part in a 24-week dietary intervention. Participants underwent three insulin-modified intravenous glucose tolerance tests (IM-IVGTT) at 0, 12, and 24 weeks.

    RESULTS: SIVGT had a median value of 3.36×10-4 L·mU-1·min-1 (IQR: 2.30 - 4.95×10-4) and were significantly lower ( P < .05) than the median SISFA (6.38×10-4 L·mU-1·min-1, IQR: 4.87 - 9.39×10-4). The VGT approach generally yielded lower SI values in line with expected participant physiology and more effectively tracked changes in participant state over the 24-week trial. Calculated GTARGET values were significantly lower than G0 values (median GTARGET = 5.48 vs G0 = 7.16 mmol·L-1 P < .001) and were notably higher in individuals with longer term diabetes.

    CONCLUSIONS: Typical modeling approaches can overestimate SI when GTARGET does not equal G0. Hence, calculating GTARGET may enable more precise SI measurements in individuals with type 2 diabetes, and could imply a dysfunction in diabetic metabolism.

  13. Ang CYS, Chiew YS, Wang X, Mat Nor MB, Cove ME, Chase JG
    Comput Biol Med, 2022 Dec;151(Pt A):106275.
    PMID: 36375413 DOI: 10.1016/j.compbiomed.2022.106275
    BACKGROUND AND OBJECTIVE: Respiratory mechanics of mechanically ventilated patients evolve significantly with time, disease state and mechanical ventilation (MV) treatment. Existing deterministic data prediction methods fail to comprehensively describe the multiple sources of heterogeneity of biological systems. This research presents two respiratory mechanics stochastic models with increased prediction accuracy and range, offering improved clinical utility in MV treatment.

    METHODS: Two stochastic models (SM2 and SM3) were developed using retrospective patient respiratory elastance (Ers) from two clinical cohorts which were averaged over time intervals of 10 and 30 min respectively. A stochastic model from a previous study (SM1) was used to benchmark performance. The stochastic models were clinically validated on an independent retrospective clinical cohort of 14 patients. Differences in predictive ability were evaluated using the difference in percentile lines and cumulative distribution density (CDD) curves.

    RESULTS: Clinical validation shows all three models captured more than 98% (median) of future Ers data within the 5th - 95th percentile range. Comparisons of stochastic model percentile lines reported a maximum mean absolute percentage difference of 5.2%. The absolute differences of CDD curves were less than 0.25 in the ranges of 5 

  14. Lee JWW, Chiew YS, Wang X, Mat Nor MB, Chase JG, Desaive T
    Biomed Eng Online, 2022 Feb 11;21(1):13.
    PMID: 35148759 DOI: 10.1186/s12938-022-00981-0
    BACKGROUND AND OBJECTIVE: Mechanical ventilation (MV) is the primary form of care for respiratory failure patients. MV settings are based on general clinical guidelines, intuition, and experience. This approach is not patient-specific and patients may thus experience suboptimal, potentially harmful MV care. This study presents the Stochastic integrated VENT (SiVENT) protocol which combines model-based approaches of the VENT protocol from previous works, with stochastic modelling to take the variation of patient respiratory elastance over time into consideration.

    METHODS: A stochastic model of Ers is integrated into the VENT protocol from previous works to develop the SiVENT protocol, to account for both intra- and inter-patient variability. A cohort of 20 virtual MV patients based on retrospective patient data are used to validate the performance of this method for volume-controlled (VC) ventilation. A performance evaluation was conducted where the SiVENT and VENT protocols were implemented in 1080 instances each to compare the two protocols and evaluate the difference in reduction of possible MV settings achieved by each.

    RESULTS: From an initial number of 189,000 possible MV setting combinations, the VENT protocol reduced this number to a median of 10,612, achieving a reduction of 94.4% across the cohort. With the integration of the stochastic model component, the SiVENT protocol reduced this number from 189,000 to a median of 9329, achieving a reduction of 95.1% across the cohort. The SiVENT protocol reduces the number of possible combinations provided to the user by more than 1000 combinations as compared to the VENT protocol.

    CONCLUSIONS: Adding a stochastic model component into a model-based approach to selecting MV settings improves the ability of a decision support system to recommend patient-specific MV settings. It specifically considers inter- and intra-patient variability in respiratory elastance and eliminates potentially harmful settings based on clinically recommended pressure thresholds. Clinical input and local protocols can further reduce the number of safe setting combinations. The results for the SiVENT protocol justify further investigation of its prediction accuracy and clinical validation trials.

  15. Benyó B, Paláncz B, Szlávecz Á, Szabó B, Kovács K, Chase JG
    Comput Methods Programs Biomed, 2023 Oct;240:107633.
    PMID: 37343375 DOI: 10.1016/j.cmpb.2023.107633
    Model-based glycemic control (GC) protocols are used to treat stress-induced hyperglycaemia in intensive care units (ICUs). The STAR (Stochastic-TARgeted) glycemic control protocol - used in clinical practice in several ICUs in New Zealand, Hungary, Belgium, and Malaysia - is a model-based GC protocol using a patient-specific, model-based insulin sensitivity to describe the patient's actual state. Two neural network based methods are defined in this study to predict the patient's insulin sensitivity parameter: a classification deep neural network and a Mixture Density Network based method. Treatment data from three different patient cohorts are used to train the network models. Accuracy of neural network predictions are compared with the current model- based predictions used to guide care. The prediction accuracy was found to be the same or better than the reference. The authors suggest that these methods may be a promising alternative in model-based clinical treatment for patient state prediction. Still, more research is needed to validate these findings, including in-silico simulations and clinical validation trials.
  16. Zainol NM, Damanhuri NS, Othman NA, Chiew YS, Nor MBM, Muhammad Z, et al.
    Comput Methods Programs Biomed, 2022 Jun;220:106835.
    PMID: 35512627 DOI: 10.1016/j.cmpb.2022.106835
    BACKGROUND AND OBJECTIVE: Mechanical ventilation (MV) provides breathing support for acute respiratory distress syndrome (ARDS) patients in the intensive care unit, but is difficult to optimize. Too much, or too little of pressure or volume support can cause further ventilator-induced lung injury, increasing length of MV, cost and mortality. Patient-specific respiratory mechanics can help optimize MV settings. However, model-based estimation of respiratory mechanics is less accurate when patient exhibit un-modeled spontaneous breathing (SB) efforts on top of ventilator support. This study aims to estimate and quantify SB efforts by reconstructing the unaltered passive mechanics airway pressure using NARX model.

    METHODS: Non-linear autoregressive (NARX) model is used to reconstruct missing airway pressure due to the presence of spontaneous breathing effort in mv patients. Then, the incidence of SB patients is estimated. The study uses a total of 10,000 breathing cycles collected from 10 ARDS patients from IIUM Hospital in Kuantan, Malaysia. In this study, there are 2 different ratios of training and validating methods. Firstly, the initial ratio used is 60:40 which indicates 600 breath cycles for training and remaining 400 breath cycles used for testing. Then, the ratio is varied using 70:30 ratio for training and testing data.

    RESULTS AND DISCUSSION: The mean residual error between original airway pressure and reconstructed airway pressure is denoted as the magnitude of effort. The median and interquartile range of mean residual error for both ratio are 0.0557 [0.0230 - 0.0874] and 0.0534 [0.0219 - 0.0870] respectively for all patients. The results also show that Patient 2 has the highest percentage of SB incidence and Patient 10 with the lowest percentage of SB incidence which proved that NARX model is able to perform for both higher incidence of SB effort or when there is a lack of SB effort.

    CONCLUSION: This model is able to produce the SB incidence rate based on 10% threshold. Hence, the proposed NARX model is potentially useful to estimate and identify patient-specific SB effort, which has the potential to further assist clinical decisions and optimize MV settings.

  17. Damanhuri NS, Chiew YS, Othman NA, Docherty PD, Pretty CG, Shaw GM, et al.
    Comput Methods Programs Biomed, 2016 Jul;130:175-85.
    PMID: 27208532 DOI: 10.1016/j.cmpb.2016.03.025
    BACKGROUND: Respiratory system modelling can aid clinical decision making during mechanical ventilation (MV) in intensive care. However, spontaneous breathing (SB) efforts can produce entrained "M-wave" airway pressure waveforms that inhibit identification of accurate values for respiratory system elastance and airway resistance. A pressure wave reconstruction method is proposed to accurately identify respiratory mechanics, assess the level of SB effort, and quantify the incidence of SB effort without uncommon measuring devices or interruption to care.

    METHODS: Data from 275 breaths aggregated from all mechanically ventilated patients at Christchurch Hospital were used in this study. The breath specific respiratory elastance is calculated using a time-varying elastance model. A pressure reconstruction method is proposed to reconstruct pressure waves identified as being affected by SB effort. The area under the curve of the time-varying respiratory elastance (AUC Edrs) are calculated and compared, where unreconstructed waves yield lower AUC Edrs. The difference between the reconstructed and unreconstructed pressure is denoted as a surrogate measure of SB effort.

    RESULTS: The pressure reconstruction method yielded a median AUC Edrs of 19.21 [IQR: 16.30-22.47]cmH2Os/l. In contrast, the median AUC Edrs for unreconstructed M-wave data was 20.41 [IQR: 16.68-22.81]cmH2Os/l. The pressure reconstruction method had the least variability in AUC Edrs assessed by the robust coefficient of variation (RCV)=0.04 versus 0.05 for unreconstructed data. Each patient exhibited different levels of SB effort, independent from MV setting, indicating the need for non-invasive, real time assessment of SB effort.

    CONCLUSION: A simple reconstruction method enables more consistent real-time estimation of the true, underlying respiratory system mechanics of a SB patient and provides the surrogate of SB effort, which may be clinically useful for clinicians in determining optimal ventilator settings to improve patient care.

  18. Yahia A, Szlávecz Á, Knopp JL, Norfiza Abdul Razak N, Abu Samah A, Shaw G, et al.
    PMID: 34078114 DOI: 10.1177/19322968211018260
    BACKGROUND: Critically ill ICU patients frequently experience acute insulin resistance and increased endogenous glucose production, manifesting as stress-induced hyperglycemia and hyperinsulinemia. STAR (Stochastic TARgeted) is a glycemic control protocol, which directly manages inter- and intra- patient variability using model-based insulin sensitivity (SI). The model behind STAR assumes a population constant for endogenous glucose production (EGP), which is not otherwise identifiable.

    OBJECTIVE: This study analyses the effect of estimating EGP for ICU patients with very low SI (severe insulin resistance) and its impact on identified, model-based insulin sensitivity identification, modeling accuracy, and model-based glycemic clinical control.

    METHODS: Using clinical data from 717 STAR patients in 3 independent cohorts (Hungary, New Zealand, and Malaysia), insulin sensitivity, time of insulin resistance, and EGP values are analyzed. A method is presented to estimate EGP in the presence of non-physiologically low SI. Performance is assessed via model accuracy.

    RESULTS: Results show 22%-62% of patients experience 1+ episodes of severe insulin resistance, representing 0.87%-9.00% of hours. Episodes primarily occur in the first 24 h, matching clinical expectations. The Malaysian cohort is most affected. In this subset of hours, constant model-based EGP values can bias identified SI and increase blood glucose (BG) fitting error. Using the EGP estimation method presented in these constrained hours significantly reduced BG fitting errors.

    CONCLUSIONS: Patients early in ICU stay may have significantly increased EGP. Increasing modeled EGP in model-based glycemic control can improve control accuracy in these hours. The results provide new insight into the frequency and level of significantly increased EGP in critical illness.

  19. Lee JWW, Chiew YS, Wang X, Tan CP, Mat Nor MB, Cove ME, et al.
    Comput Methods Programs Biomed, 2022 Feb;214:106577.
    PMID: 34936946 DOI: 10.1016/j.cmpb.2021.106577
    BACKGROUND AND OBJECTIVE: Mechanical ventilation is the primary form of care provided to respiratory failure patients. Limited guidelines and conflicting results from major clinical trials means selection of mechanical ventilation settings relies heavily on clinician experience and intuition. Determining optimal mechanical ventilation settings is therefore difficult, where non-optimal mechanical ventilation can be deleterious. To overcome these difficulties, this research proposes a model-based method to manage the wide range of possible mechanical ventilation settings, while also considering patient-specific conditions and responses.

    METHODS: This study shows the design and development of the "VENT" protocol, which integrates the single compartment linear lung model with clinical recommendations from landmark studies, to aid clinical decision-making in selecting mechanical ventilation settings. Using retrospective breath data from a cohort of 24 patients, 3,566 and 2,447 clinically implemented VC and PC settings were extracted respectively. Using this data, a VENT protocol application case study and clinical comparison is performed, and the prediction accuracy of the VENT protocol is validated against actual measured outcomes of pressure and volume.

    RESULTS: The study shows the VENT protocols' potential use in narrowing an overwhelming number of possible mechanical ventilation setting combinations by up to 99.9%. The comparison with retrospective clinical data showed that only 33% and 45% of clinician settings were approved by the VENT protocol. The unapproved settings were mainly due to exceeding clinical recommended settings. When utilising the single compartment model in the VENT protocol for forecasting peak pressures and tidal volumes, median [IQR] prediction error values of 0.75 [0.31 - 1.83] cmH2O and 0.55 [0.19 - 1.20] mL/kg were obtained.

    CONCLUSIONS: Comparing the proposed protocol with retrospective clinically implemented settings shows the protocol can prevent harmful mechanical ventilation setting combinations for which clinicians would be otherwise unaware. The VENT protocol warrants a more detailed clinical study to validate its potential usefulness in a clinical setting.

Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links