Gelatin is widely used in food and pharmaceutical products. However, the addition of gelatin especially in food products becomes a controversial issue among Muslims due to its animal origin. Thus, the present study was aimed to detect and differentiate the origin of gelatin added in processed foods using a combination method of sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and Principal Component Analysis (PCA). Porcine gelatin had exhibited 11 prominent polypeptides compared to bovine gelatin with 2 prominent polypeptides. Polypeptides of both gelatin sources at molecular weight ranged from 53 to 220 kDa can be used to differentiate between porcine and bovine gelatins using PCA. The efficiency in extracting gelatin from processed foods by different solutions was also evaluated. Extraction of gelatin in processed foods by cold acetone and deionised water had exhibited a similar polypeptide patterns, suggesting both solutions are suitable. The study indicated that approach of a simple gelatin extraction combined with SDS-PAGE and PCA, may provide robust information for gelatin species differentiation of processed foods.
Virgin Coconut Oils (VCO) were prepared from fresh-dry (grated coconut route), chilling and thawing, enzymatic and fermentation method in this study. All of the VCO produced conformed physicochemically to the standards established by the Asian and Pacific Coconut Community (APCC) and Codex Alimentarius Commission. The highest FA (fatty acid) is lauric acid in all of the VCO and ranged from 46.36 – 48.42 %, while the principal TAG (triacylglycerol) is LaLaLa (La: Lauric) with 17.94 – 19.83 % of the total TAG. Tocopherol analysis showed the presence of beta, gamma and delta tocopherols at low levels. In all, the physicochemical, FA and TAG analyses of the VCO extracted from different methods showed some significant differences, while the tocopherol content does not differ significantly among the different types of extraction methods used.
The effects of scanning rates (1, 5, 10 and 20 degrees C/min) on the DSC cooling profiles of 11 vegetable oils have been determined in order to monitor peak transition temperatures, onset temperatures and crystallisation enthalpies. Triacylglycerol (TAG) profiles and iodine value analyses were used to complement the DSC data. The melted samples exhibited complicated crystallising exotherms. As the cooling rate increased, the crystallisation temperature decreased and the breadth of the crystallisation exotherm on cooling from the melt increased. In addition, the intensity of the exothermic peak increased somewhat when the cooling rate was increased. At slow cooling rates, TAG had more time to interact. It is conceivable that, at a low cooling rate (1 degree C/min), a prominent exotherm would be observed on crystallisation of vegetable oils and fats. The occurrence of one exotherm upon cooling indicated the co-crystallisation of the TAG upon slow cooling. On the basis of the corollary results obtained, vegetable oils may be differentiated by their onset temperature (Ton) values in the DSC cooling curves. Generally, there was a shift of Ton toward lower values with increasing cooling rates.
A simple and rapid Fourier transform infrared (FTIR) spectroscopic method has been developed for the quantitative determination of malondialdehyde as secondary oxidation product in a palm olein system. The FTIR method was based on a sodium chloride transmission cell and utilised a partial least square statistical approach to derive a calibration model. The frequency region combinations that gave good calibration were 2900-2800, and 1800-1600 cm-1. The precision and accuracy, in the range 0-60 mumol malondialdehyde/kg oil, were comparable to those of the modified distillation method with a coefficient of determination (r2) of 0.9891 and standard error of calibration of 1.49. The calibration was cross-validated and produced an r2 of 0.9786 and standard error of prediction of 2.136. The results showed that the FTIR method is versatile, efficient and accurate, and suitable for routine quality control analysis with the result obtainable in about 2 min from a sample of less than 2 mL.
The volatile compounds of pork, other meats and meat products were studied using an electronic nose and gas chromatography mass spectrometer with headspace analyzer (GCMS-HS) for halal verification. The zNose™ was successfully employed for identification and differentiation of pork and pork sausages from beef, mutton and chicken meats and sausages which were achieved using a visual odor pattern called VaporPrint™, derived from the frequency of the surface acoustic wave (SAW) detector of the electronic nose. GCMS-HS was employed to separate and analyze the headspace gasses from samples into peaks corresponding to individual compounds for the purpose of identification. Principal component analysis (PCA) was applied for data interpretation. Analysis by PCA was able to cluster and discriminate pork from other types of meats and sausages. It was shown that PCA could provide a good separation of the samples with 67% of the total variance accounted by PC1.
The study was aimed to differentiate between porcine and bovine gelatines in adulterated samples by utilising sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) combined with principal component analysis (PCA). The distinct polypeptide patterns of 6 porcine type A and 6 bovine type B gelatines at molecular weight ranged from 50 to 220 kDa were studied. Experimental samples of raw gelatine were prepared by adding porcine gelatine in a proportion ranging from 5% to 50% (v/v) to bovine gelatine and vice versa. The method used was able to detect 5% porcine gelatine added to the bovine gelatine. There were no differences in the electrophoretic profiles of the jelly samples when the proteins were extracted with an acetone precipitation method. The simple approach employing SDS-PAGE and PCA reported in this paper may provide a useful tool for food authenticity issues concerning gelatine.
The pig (Sus scrofa) mitochondrial genome was targeted to design short (15-30 nucleotides) DNA markers that would be suitable for biosensor-based hybridization detection of target DNA. Short DNA markers are reported to survive harsh conditions in which longer ones are degraded into smaller fragments. The whole swine mitochondrial-genome was in silico digested with AluI restriction enzyme. Among 66 AluI fragments, five were selected as potential markers because of their convenient lengths, high degree of interspecies polymorphism and intraspecies conservatism. These were confirmed by NCBI blast analysis and ClustalW alignment analysis with 11 different meat-providing animal and fish species. Finally, we integrated a tetramethyl rhodamine-labeled 18-nucleotide AluI fragment into a 3-nm diameter citrate-tannate coated gold nanoparticle to develop a swine-specific hybrid nanobioprobe for the determination of pork adulteration in 2.5-h autoclaved pork-beef binary mixtures. This hybrid probe detected as low as 1% pork in deliberately contaminated autoclaved pork-beef binary mixtures and no cross-species detection was recorded, demonstrating the feasibility of this type of probe for biosensor-based detection of pork adulteration of halal and kosher foods.
A test for assessing pork adulteration in meatballs, using TaqMan probe real-time polymerase chain reaction, was developed. The assay combined porcine-specific primers and TaqMan probe for the detection of a 109 bp fragment of porcine cytochrome b gene. Specificity test with 10 ng DNA of eleven different species yielded a threshold cycle (Ct) of 15.5 ± 0.20 for the pork and negative results for the others. Analysis of beef meatballs with spiked pork showed the assay can determine 100-0.01% contaminated pork with 102% PCR efficiency, high linear regression (r(2) = 0.994) and ≤ 6% relative errors. Residuals analysis revealed a high precision in all determinations. Random analysis of commercial meatballs from pork, beef, chicken, mutton and goat, yielded a Ct between 15.89 ± 0.16 and 16.37 ± 0.22 from pork meatballs and negative results from the others, showing the suitability of the assay to determine pork in commercial meatballs with a high accuracy and precision.
A method for species identification from pork and lard samples using polymerase chain reaction (PCR) analysis of a conserved region in the mitochondrial (mt) cytochrome b (cyt b) gene has been developed. Genomic DNA of pork and lard were extracted using Qiagen DNeasy(®) Tissue Kits and subjected to PCR amplification targeting the mt cyt b gene. The genomic DNA from lard was found to be of good quality and produced clear PCR products on the amplification of the mt cyt b gene of approximately 360 base pairs. To distinguish between species, the amplified PCR products were cut with restriction enzyme BsaJI resulting in porcine-specific restriction fragment length polymorphisms (RFLP). The cyt b PCR-RFLP species identification assay yielded excellent results for identification of pig species. It is a potentially reliable technique for detection of pig meat and fat from other animals for Halal authentication.