Fibres have been used in construction materials for a very long time. Through previous research and investigations, the use of natural and synthetic fibres have shown promising results, as their presence has demonstrated significant benefits in terms of the overall physical and mechanical properties of the composite material. When comparing fibre reinforcement to traditional reinforcement, the ratio of fibre required is significantly less, making fibre reinforcement both energy and economically efficient. More recently, waste fibres have been studied for their potential as reinforcement in construction materials. The build-up of waste materials all around the world is a known issue, as landfill space is limited, and the incineration process requires considerable energy and produces unwanted emissions. The utilisation of waste fibres in construction materials can alleviate these issues and promote environmentally friendly and sustainable solutions that work in the industry. This study reviews the types, properties, and applications of different fibres used in a wide range of materials in the construction industry, including concrete, asphalt concrete, soil, earth materials, blocks and bricks, composites, and other applications.
Nanoparticles are defined as ultrafine particles sized between 1 and 100 nanometres in diameter. In recent decades, there has been wide scientific research on the various uses of nanoparticles in construction, electronics, manufacturing, cosmetics, and medicine. The advantages of using nanoparticles in construction are immense, promising extraordinary physical and chemical properties for modified construction materials. Among the many different types of nanoparticles, titanium dioxide, carbon nanotubes, silica, copper, clay, and aluminium oxide are the most widely used nanoparticles in the construction sector. The promise of nanoparticles as observed in construction is reflected in other adoptive industries, driving the growth in demand and production quantity at an exorbitant rate. The objective of this study was to analyse the use of nanoparticles within the construction industry to exemplify the benefits of nanoparticle applications and to address the short-term and long-term effects of nanoparticles on the environment and human health within the microcosm of industry so that the findings may be generalised. The benefits of nanoparticle utilisation are demonstrated through specific applications in common materials, particularly in normal concrete, asphalt concrete, bricks, timber, and steel. In addition, the paper addresses the potential benefits and safety barriers for using nanomaterials, with consideration given to key areas of knowledge associated with exposure to nanoparticles that may have implications for health and environmental safety. The field of nanotechnology is considered rather young compared to established industries, thus limiting the time for research and risk analysis. Nevertheless, it is pertinent that research and regulation precede the widespread adoption of potentially harmful particles to mitigate undue risk.
Proposals have been made by several researchers to conduct the sequestration of carbon dioxide (CO2) through calcium and magnesium-rich materials. From these materials, ground granulated blast furnace slag (GGBS) containing 5% magnesium and 45% calcium is seen to be a good candidate and is available to sequester CO2. This study intends to ascertain the ability to absorb CO2, sequester it, and increase treated kaolin strength with different content of GGBS under various carbonation periods with varying CO2 pressure. The impacts of carbonated GGBS on the mechanical attributes of soil were examined by conducting the unconfined compressive strength (UCS) test, and microstructure analysis was conducted to identify the changes in the structure and Crestline phase. Stationary carbonation in a triaxial test with pure CO2 was conducted to accelerate the carbonation process. The outcome indicates that the strength rises as the carbonation period rises. Likewise, UCS rises as the CO2 pressure rises from 100 to 200 kPa. It could be concluded that augmentation of the strength is because of carbonated calcium and magnesium products which stuff the soil voids. Changes occur on the microstructure level due to carbonation as well.