Displaying all 9 publications

Abstract:
Sort:
  1. Oyekanmi AA, Ahmad A, Hossain K, Rafatullah M
    PLoS One, 2019;14(5):e0216878.
    PMID: 31091269 DOI: 10.1371/journal.pone.0216878
    The adsorption of rhodamine B (RhB) using acid modified banana peels has been examined. Chemical characteristics of the adsorbents were observed in order to determine active functional groups. The major functional groups on the surface were OH, C = O, C = C and C-O-C. Interactions between operational parameters were studied using the central composite design (CCD) of response surface methodology (RSM). The predictions of the model output indicated that operational factors influenced responses at a confidence level of 95% (P<0.05). The optimum conditions for adsorption were pH 2 at a 0.2 g/L dose within 60 minutes of contact time. Isotherm studies were carried out using the optimized process variables. The data revealed that RhB adsorption fitted the Langmuir isotherm equation while the reduction of COD followed the Freundlich isotherm. Kinetic experiments fitted the pseudo second order model for RhB removal and COD reduction. The adsorption mechanism was not the only rate controlling step. Diffusion through the boundary layer described the pattern of adsorption.
  2. Hossain KA, Mohd-Jaafar MN, Appalanidu KB, Mustafa A, Ani FN
    Environ Technol, 2005 Mar;26(3):251-9.
    PMID: 15881021
    Selective Non-Catalytic Reduction (SNCR) of nitric oxide has been studied experimentally by injecting aqueous urea solution with and without additive in a pilot-scale diesel fired tunnel furnace at 3.4% excess oxygen level and with low ppm of baseline NO(x) ranging from 65 to 75 ppm within the investigated temperature range. The tests have been carried out using commercial grade urea as NO(x) reducing agent and commercial grade sodium carbonate as additive. The furnace simulated the small-scale combustion systems, where the operating temperatures are usually in the range of about 973 to 1323 K and NO(x) emission level remains below 100 ppm. With 5% plain urea solution, at Normalized Stoichiometric Ratio (NSR) of 4 as much as 54% reduction was achieved at 1128 K, whilst in the additive case the NO(x) reduction was improved to as much as 69% at 1093 K. Apart from this improvement, in the additive case, the effective temperature window as well as peak temperature of NO(x) reduction shifted towards lower temperatures. The result is quite significant, especially for this investigated level of baseline NO(x). The ammonia slip measurements showed that in both cases the slip was below 16 ppm at NSR of 4 and optimum temperature of NO(x) reduction. Finally, the investigations demonstrated that urea based SNCR is quite applicable to small-scale combustion applications and commercial grade sodium carbonate is a potential additive.
  3. Hossain K, Quaik S, Ismail N, Rafatullah M, Avasan M, Shaik R
    Iran J Biotechnol, 2016 Sep;14(3):154-162.
    PMID: 28959331 DOI: 10.15171/ijb.1216
    BACKGROUND: Application of membrane technology to wastewater treatment has expanded over the last decades due to increasingly stringent legislation, greater opportunities for water reuse/recycling processes and continuing advancement in membrane technology.

    OBJECTIVES: In the present study, a bench-scale submerged microfiltration membrane bioreactor (MBR) was used to assess the treatment of textile wastewater.

    MATERIALS AND METHODS: The decolorization capacity of white-rot fungus coriolus versicolor was confirmed through agar plate and liquid batch studies. The temperature and pH of the reactor were controlled at 29±1°C and 4.5±2, respectively. The bioreactor was operated with an average flux of 0.05 m.d(-1) (HRT=15hrs) for a month.

    RESULTS: Extensive growth of fungi and their attachment to the membrane led to its fouling and associated increase of the transmembrane pressure requiring a periodic withdrawal of sludge and membrane cleaning. However, stable decoloration activity (approx. 98%), BOD (40-50%), COD (50-67%) and total organic carbon (TOC) removal (>95%) was achieved using the entire system (fungi + membrane), while the contribution of the fungi culture alone for TOC removal, as indicated by the quality of the reactor supernatant, was 35-50% and 70%, respectively.

    CONCLUSIONS: The treated wastewater quality satisfied the requirement of water quality for dyeing and finishing process excluding light coloration. Therefore, textile wastewater reclamation and reuse is a promising alternative, which can both conserve or supplement the available water resource and reduce or eliminate the environmental pollution.

  4. Bala JD, Lalung J, Al-Gheethi AAS, Hossain K, Ismail N
    Trop Life Sci Res, 2018 Jul;29(2):131-163.
    PMID: 30112146 MyJurnal DOI: 10.21315/tlsr2018.29.2.10
    This study was aimed at identifying indigenous microorganisms from palm oil mill effluent (POME) and to ascertain the microbial load. Isolation and identification of indigenous microorganisms was subjected to standard microbiological methods and sequencing of the 16S rRNA and 18S rRNA genes. Sequencing of the 16S rRNA and 18S rRNA genes for the microbial strains signifies that they were known as Micrococcus luteus 101PB, Stenotrophomonas maltophilia 102PB, Bacillus cereus 103PB, Providencia vermicola 104PB, Klebsiella pneumoniae 105PB, Bacillus subtilis 106PB, Aspergillus fumigatus 107PF, Aspergillus nomius 108PF, Aspergillus niger 109PF and Meyerozyma guilliermondii 110PF. Results revealed that the population of total heterotrophic bacteria (THB) ranged from 9.5 × 105 - 7.9 × 106 cfu/mL. The total heterotrophic fungi (THF) ranged from 2.1 × 104 - 6.4 × 104 cfu/mL. Total viable heterotrophic indigenous microbial population on CMC agar ranged from 8.2 × 105 - 9.1 × 106 cfu/mL and 1.4 × 103 - 3.4 × 103 cfu/mL for bacteria and fungi respectively. The microbial population of oil degrading bacteria (ODB) ranged from 6.4 × 105 - 4.8 × 106 cfu/mL and the oil degrading fungi (ODF) ranged from 2.8 × 103 - 4.7 × 104 cfu/mL. The findings revealed that microorganisms flourish well in POME. Therefore, this denotes that isolating native microorganisms from POME is imperative for effectual bioremediation, biotreatment and biodegradation of industrial wastewaters.
  5. Hossain K, Sabapathy T, Jusoh M, Abdelghany MA, Soh PJ, Osman MN, et al.
    Polymers (Basel), 2021 Aug 22;13(16).
    PMID: 34451357 DOI: 10.3390/polym13162819
    In this paper, a compact textile ultrawideband (UWB) planar monopole antenna loaded with a metamaterial unit cell array (MTMUCA) structure with epsilon-negative (ENG) and near-zero refractive index (NZRI) properties is proposed. The proposed MTMUCA was constructed based on a combination of a rectangular- and a nonagonal-shaped unit cell. The size of the antenna was 0.825 λ0 × 0.75 λ0 × 0.075 λ0, whereas each MTMUCA was sized at 0.312 λ0 × 0.312 λ0, with respect to a free space wavelength of 7.5 GHz. The antenna was fabricated using viscose-wool felt due to its strong metal-polymer adhesion. A naturally available polymer, wool, and a human-made polymer, viscose, that was derived from regenerated cellulose fiber were used in the manufacturing of the adopted viscose-wool felt. The MTMUCA exhibits the characteristics of ENG, with a bandwidth (BW) of 11.68 GHz and an NZRI BW of 8.5 GHz. The MTMUCA was incorporated on the planar monopole to behave as a shunt LC resonator, and its working principles were described using an equivalent circuit. The results indicate a 10 dB impedance fractional bandwidth of 142% (from 2.55 to 15 GHz) in simulations, and 138.84% (from 2.63 to 14.57 GHz) in measurements obtained by the textile UWB antenna. A peak realized gain of 4.84 dBi and 4.4 dBi was achieved in simulations and measurements, respectively. A satisfactory agreement between simulations and experiments was achieved, indicating the potential of the proposed negative index metamaterial-based antenna for microwave applications.
  6. Kundu BC, Mohsin GM, Rahman MS, Ahamed F, Mahato AK, Hossain KMD, et al.
    Braz J Biol, 2022;84:e255605.
    PMID: 35019109 DOI: 10.1590/1519-6984.255605
    Combining ability analysis provides useful information for the selection of parents, also information regarding the nature and magnitude of involved gene actions. Crops improvement involves strategies for enhancing yield potentiality and quality components. Targeting the improvement of respective characters in bitter gourd, combining ability and genetic parameters for 19 characters were estimated from a 6×6 full diallel analysis technique. The results revealed that the variances due to general combining ability (GCA) and specific combining ability (SCA) were highly significant for most of the important characters. It indicated the importance of both additive and non-additive gene actions. GCA variances were higher in magnitude than SCA variances for all the characters studied indicating the predominance of the additive gene effects in their inheritance. The parent P2 (BG 009) appeared as the best general combiner for earliness; P1 (BG 006) for number of fruits, average single fruit weight and fruit yield; P4 (BG 027) for node number of first female flower and days to seed fruit maturity; P3 (BG 011) for fruit length and thickness of the fruit flesh; P5 (BG 033) for 100-seed weight; and P6 for number of nodes per main vine. The SCA effect as well as reciprocal effect was also significant for most of the important characters in different crosses.
  7. Kabir MF, Yin KN, Jeffree MS, Ahmedy FB, Jahan S, Islam MW, et al.
    Arch Public Health, 2023 Jul 17;81(1):132.
    PMID: 37461092 DOI: 10.1186/s13690-023-01140-0
    BACKGROUND AND AIMS: It is important to determine the profile of long COVID (LC) symptoms within the scope of rehabilitation in Bangladesh. This study's objective was to estimate the newly experienced long COVID symptoms needing rehabilitation by determining the prevalence and spectrum of impairments due to LC in Bangladesh.

    METHODS: A Cross-sectional household survey of 12,925 COVID-19 patients confirmed by RT-PCR from 24 testing facilities in Bangladesh. LC was diagnosed according to WHO working group definition. COVID-19 Yorkshire Rehabilitation Scale (C19-YRS) was used to determine the symptom responses, symptom severity, new long COVID symptoms, and scope of rehabilitation.

    RESULTS: The population proportion of LC symptoms requiring rehabilitation interventions are 0.22 [95% CI, 0.20-0.24] in Bangladeshi people diagnosed with SARS-CoV-2. Among them, 0.08 [95% CI, 0.07-0.09] had mild, 0.07 [95% CI, 0.06-0.09] had moderate, and 0.05 [95% CI, 0.04-0.06] had severe long COVID symptoms (LCS). There was a significant positive correlation between LCS and functional disabilities (r = 0.889, p 

  8. Kabir MF, Yin KN, Jeffree MS, Ahmedy FB, Zainudin MF, Htwe O, et al.
    BMC Infect Dis, 2024 Apr 04;24(1):375.
    PMID: 38575878 DOI: 10.1186/s12879-024-09267-3
    BACKGROUND: Pain is one of the prevalent Long COVID Symptoms (LCS). Pain interferes with the quality of life (QoL) and induces disease burden.

    PURPOSE: The study aimed to elicit the clinical presentation of pain and determine the relationships between QoL and pain in LCS.

    METHODS: This household cross-sectional study of 12,925 SARS-CoV-2 cases between July and December 2021 was carried out in eight administrative divisions of Bangladesh. Stratified random sampling from the cases retrieved from the Ministry of Health was employed. Symptom screening was performed through COVID-19 Yorkshire Rehabilitation Scale, and long COVID was diagnosed according to World Health Organization (WHO) criteria. The analyses were conducted using IBM SPSS (Version 20.00).

    RESULTS: The prevalence of pain in long COVID was between 01 and 3.1% in the studied population. The study also found five categories of pain symptoms as LCS in Bangladesh: muscle pain 3.1% (95% CI; 2.4-3.8), chest pain 2.4% (95% CI; 1.8-3.1), joint pain 2.8% (95% CI; 2.2-2.3), headache 3.1% (95% CI; 2.4-3.8), and abdominal pain 0.3% (95% CI; 0.01-0.5). People with LCS as pain, multiple LCS, and longer duration of LCS had significantly lower quality of life across all domains of the WHOQOL-BREF (P 

  9. Kabir MF, Nyein Yin K, Htwe O, Saffree Jeffree M, Binti Ahmedy F, Faizal Zainudin M, et al.
    PLoS One, 2024;19(6):e0304824.
    PMID: 38941308 DOI: 10.1371/journal.pone.0304824
    BACKGROUND: Spinal cord injury (SCI) is a consequence of significant disability and health issues globally, and long COVID represents the symptoms of neuro-musculoskeletal, cardiovascular and respiratory complications.

    PURPOSE: This study aimed to identify the symptom responses and disease burden of long COVID in individuals with spinal cord injury.

    METHODS: This case-control study was conducted on patients with SCI residing at a specialised rehabilitation centre in Bangladesh. Forty patients with SCI with and without long COVID symptoms (LCS) were enrolled in this study at a 1:1 ratio according to WHO criteria.

    RESULT: Twelve LCS were observed in patients with SCI, including fatigue, musculoskeletal pain, memory loss, headache, respiratory problems, anxiety, depression, insomnia, problem in ADL problem in work, palpitation, and weakness. The predictors of developing long COVID include increasing age (p<0.002), increasing BMI (p<0.03), and longer duration of spinal cord injury (p<0.004). A significant difference (p<0.01) in overall years of healthy life lost due to disability (YLD) for non-long COVID cases was 2.04±0.596 compared to long COVID (LC) cases 1.22±2.09 was observed.

    CONCLUSION: Bangladeshi patients of SCI presented 12 long COVID symptoms and have a significant disease burden compared to non long COVID cases.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links