Displaying all 12 publications

Abstract:
Sort:
  1. Aal-Saraj AB, Ariffin Z, Masudi SM
    Aust Endod J, 2012 Aug;38(2):60-3.
    PMID: 22827817 DOI: 10.1111/j.1747-4477.2010.00241.x
    The aim of this study was to evaluate the antimicrobial activity of a new experimental nano-hydroxyapatite epoxy resin-based sealer (Nanoseal) with several other commercially available sealers; AH26, Tubliseal, Sealapex and Roekoseal against Enterococcus faecalis, Pseudomonas aeruginosa, Streptococcus mutans, Streptococcus sobrinus and Escherichia coli for up to 7 days. Agar diffusion was used in this study. Fifty Muller-Hinton agar plates were prepared and divided into five experimental groups (n = 10), for each micro-organism. Another 10 agar plates were used as positive and negative controls. Endodontic sealers were tested against each micro-organism. Inhibition zones produced were recorded. The results of this study showed that all test materials exhibited inhibition zones towards the tested micro-organisms for 7 days except for Roekoseal, which showed no inhibition zones. Nanoseal and AH26 exhibited similar zones of inhibition. Significant difference was found between Nanoseal and the other tested sealers (P < 0.001).
  2. Noorani TY, Luddin N, Rahman IA, Masudi SM
    J Clin Diagn Res, 2017 Apr;11(4):ZC105-ZC109.
    PMID: 28571275 DOI: 10.7860/JCDR/2017/24753.9739
    INTRODUCTION: Glass Ionomer Cements (GIC) are among the most popular restorative materials, but their use in dentistry is limited due to their physical properties. The hardness of GIC was improved by incorporation of nano-hydroxyapatite-silica into GIC, to expand its applicability.

    AIM: To evaluate the cytotoxic effects of nano-hydroxyapatite-silica incorporated glass ionomer cement (HA-SiO2-GIC) on human Dental Pulp Stem Cells (DPSC) and compare it with conventional GIC and resin modified GIC.

    MATERIALS AND METHODS: Material extracts of Fuji IX, Fuji II LC and HA-SiO2-GIC were prepared into seven serial concentrations and applied to 96-well-plates seeded with DPSC. The 96-well-plates were incubated for 24 and 72 hours. The morphology of DPSC was observed under the inverted phase contrast microscope, and the cell viability was determined using MTT assay at both time intervals. Kruskal-Wallis test was performed for statistical analysis.

    RESULTS: At maximum concentration, DPSC appeared fewer in number, but the normal spindle morphology was maintained in all groups except for Fuji II LC. At lower concentrations, DPSC appeared normal and more confluent in all groups. The cytotoxic effects of all groups were dose dependent. Fuji IX demonstrated the lowest cytotoxicity, followed by HA-SiO2-GIC. Fuji II LC demonstrated the highest cytotoxicity. The difference was significant between all groups at 200 mg/ml concentration (p<0.05). At concentration <100 mg/ml, cytotoxicity of HA-SiO2-GIC was comparable to that of Fuji IX and lower than that of Fuji II LC.

    CONCLUSION: HA-SiO2-GIC showed a favourable cytotoxicity response and thus holds promise as a future potential restorative material in clinical dentistry.

  3. Al-Khatib AR, Rajion ZA, Masudi SM, Hassan R, Townsend GC
    Homo, 2013 Aug;64(4):296-311.
    PMID: 23755965 DOI: 10.1016/j.jchb.2013.04.002
    The aim of this study was to evaluate the relationships of selected facial measurements with mesio-distal crown widths and dental arch dimensions in individuals with normal occlusions. A cross-sectional study was conducted on 276 subjects with Angle's Class I normal occlusions. Three-dimensional images of the face and dental casts were captured and analyzed using stereophotogrammetric systems. Significant correlations were found between the sagittal facial variables and both upper and lower dental arch dimensions and to lesser degree with the horizontal and vertical variables. The values of correlation coefficients calculated between facial and dental crown measurements ranged from .01 to .50 for upper teeth and .01 to .49 for lower teeth. The values of correlation coefficients between facial and upper dental arch dimensions ranged from .01 to .55 and those between facial and lower dental arch dimensions ranged from .01 to .60. A principal components analysis showed that the sagittal dimensions, face height, nose, labial fissure, binocular widths were positively associated with dental arch dimensions and mesio-distal crown diameters in males. On the other hand, only the sagittal variables were associated with dental dimensions in females. The results of this study confirm that positive associations exist between facial and dental arch dimensions. These relationships should be taken into consideration when attempts are made to modify dental arch size as part of orthodontic treatment. Moreover, these relationships are also relevant to prosthodontists involved with selecting tooth sizes that display optimal functional balance with the craniofacial structures.
  4. Al-Khatib AR, Rajion ZA, Masudi SM, Hassan R, Townsend GC
    Aust Orthod J, 2012 May;28(1):22-9.
    PMID: 22866590
    The development of three-dimensional computer imaging has many applications in dentistry, including the analysis of dental casts.
  5. Al-Khatib AR, Rajion ZA, Masudi SM, Hassan R, Anderson PJ, Townsend GC
    Orthod Craniofac Res, 2011 Nov;14(4):243-53.
    PMID: 22008304 DOI: 10.1111/j.1601-6343.2011.01529.x
    To investigate tooth size and dental arch dimensions in Malays using a stereophotogrammetric system.
  6. Irawan BA, Irawan SN, Masudi SM, Sukminingrum N, Alam MK
    Biomed Res Int, 2015;2015:327289.
    PMID: 26558267 DOI: 10.1155/2015/327289
    This study aims to evaluate the effects of vital tooth bleaching with carbamide peroxide home bleaching and in-office bleaching on the color stability and 3D surface profile of dental restorative filling materials. Thirty discs (n = 30) measure 6 mm in diameter and 2 mm thick for each of three restorative materials. These are nanofilled composite Filtek Z350 XT, the submicron composite Estelite Σ Quick, and nanofilled glass ionomer Ketac N100 nanoionomer and were fabricated in shade A2. Each group was further divided into three subgroups (n = 10): subgroup A (Opalescence PF), subgroup B (Opalescence Boost in-office bleaching), and subgroup C (distilled water) serving as control. Samples were bleached according to the manufacturer's instructions for a period of two weeks. The Commission Internationale de L'Eclairage (CIE L(*), a(*), b(*)) system was chosen for image processing, while 3D surface profile was tested with atomic force microscopy (AFM). Statistical analyses were performed with the Mann-Whitney tests and Krusal-Wallis with a P value of ≤ 0.05. The three restorative materials showed significant color changes (ΔE); P ≤ 0.05. In diminishing order, the mean color changes recorded were Estelite Σ (3.82 ± 1.6) > Ketac Nano (2.97 ± 1.2) > Filtek Z350 XT (2.25 ± 1.0). However, none of the tested materials showed statistically significant changes in surface roughness; P > 0.05.
  7. Bakhori SKM, Mahmud S, Mohamad D, Masudi SM, Seeni A
    Mater Sci Eng C Mater Biol Appl, 2019 Jul;100:645-654.
    PMID: 30948101 DOI: 10.1016/j.msec.2019.03.034
    Zinc oxide eugenol (ZOE) cements are generally made up of 80%-90% ZnO powder while the remaining content consists of eugenol bonding resin. ZnO structure plays a major role in the morphology and mechanical properties of ZOE. In this study, we investigated the effects of different particle sizes/shapes of ZnO particles on the surface and mechanical properties of ZOE. Three samples were prepared namely ZnO-Ax, ZnO-B and ZnO-K. The crystallite sizes calculated from XRD were 37.76 nm (ZnO-Ax), 39.46 nm (ZnO-B) and 42.20 nm (ZnO-K) while the average particle sizes obtained by DLS were 21.11nm (ZnO-Ax), 56.73 nm (ZnO-B) and 2012 nm (ZnO-K). Results revealed that the compressive strengths of ZOE-Ax and ZOE-B were improved by 87.92% and 57.16%, respectively, relative to that of commercial ZOE-K. Vickers hardness test demonstrated that the hardness of ZOE-Ax and ZOE-B also increased by 74.9% and 31.1%, respectively. The ZnO-Ax nanostructure possessed a small average particle size (21.11 nm), a homogeneous size distribution (DLS) and an oxygen-rich surface (from EDS and elemental mapping). Meanwhile, ZnO-B exhibited a slightly larger average particle size of 56.73 nm compared with that of other samples. Sample ZnO-Ax demonstrated the highest compressive strength which was attributed to its large particle surface area (21.11 nm particle size) that provided a large contact area and greater interfacial (or interlock) bonding capability if compared to that of ZnO-K sample (2012 nm particle size).
  8. Al-Khatib AR, Rajion ZA, Masudi SM, Hassan R, Anderson PJ, Townsend GC
    Cleft Palate Craniofac J, 2012 Jul;49(4):463-71.
    PMID: 22236217 DOI: 10.1597/11-151
    It is clear that population-specific norms should be used when planning plastic and reconstructive surgery for selected patients. In this study, we aimed to generate nasal and labial reference values by applying a stereophotogrammetric technique. A further aim was to investigate the effect of sexual dimorphism, age-related changes, and the interrelation between nasal and labial morphology.
  9. Deng PU, Halim MS, Masudi SM, Al-Shehadat S, Ahmad B
    Eur J Dent, 2018 8 28;12(3):410-416.
    PMID: 30147408 DOI: 10.4103/ejd.ejd_82_18
    Objective: The aim of this study is to investigate the variations in the number of root and canal in the mandibular first permanent molars (MFPMs) teeth in East Coast Malaysian population using cone-beam computed tomography (CBCT).

    Materials and Methods: CBCT images which show MFPMs recorded in HUSM Dental Clinic between January 2015 and June 2016 was obtained and analyzed for their number of roots and canals. A total of 208 CBCT images of MFPMs were collected; 118 patients had unilateral molars and 90 patients had bilateral molars. The following observations were made: (1) root number; (2) number of canals per root; and (3) comparisons of number of roots and canals according to gender, ethnicity, and position.

    Results: The majority of cases of bilateral MFPM had the same number of roots (95.6%, 95% confidence interval [CI]: 89.01%, 98.78%) on both the right and left side and only 4 cases (4.4%, 95% CI: 1.22%, 10.99%) had 3 roots on the right and 2 roots on the left sides. The majority of cases had the same number of canals on both sides (66.7%, 95% CI: 55.95, 76.26%) and 33.3% (95% CI: 23.74%, 44.05%) with unequal number of canals. The occurrence of the number of canals was not independent of the sides of the arch (P < 0.001) and there was statistically significantly greater proportion of cases who had greater number of canals on the right side than the left (P = 0.03). The prevalence of right single-rooted MFPM was very small at 0.3% (n = 1) in a Malay male (95% CI: 0.00, 1.83) and the most prevalent was two roots first molar (88.4%). The number of roots was not associated with sex or ethnic group (P > 0.05). The MFPM with a single root was found to have only one mesial canal. For two rooted MFPM, the most prevalent occurrence was two canals at the mesial and one canal at the distal roots (59%); followed by single canals in each mesial and distal (21%) and double canals per root (18%). Three roots MFPM have either single or double canals in the mesial root and double canals in the distal root.

    Conclusions: The majority of population in the East Coast region of Malaysia has two roots and three root canals in their MFPMs. There was no difference in the number of roots between gender and ethnic and canals between ethnic.

  10. Moheet IA, Luddin N, Rahman IA, Kannan TP, Nik Abd Ghani NR, Masudi SM
    Eur J Dent, 2019 Jul;13(3):470-477.
    PMID: 31280484 DOI: 10.1055/s-0039-1693524
    The aim of this article is to provide a brief insight regarding the recent studies and their recommendations related to the modifications to glass ionomer cement (GIC) powder in order to improve their properties. An electronic search of publications was made from the year 2000 to 2018. The databases included in the current study were EBSCOhost, PubMed, and ScienceDirect. The inclusion criteria for the current study include publication with abstract or full-text articles, original research, reviews or systematic reviews, in vitro, and in vivo studies that were written in English language. Among these only articles published in peer-reviewed journals were included. Articles published in other languages, with no available abstract and related to other nondentistry fields, were excluded. A detailed review of the recent materials used as a filler phase in GIC powder has revealed that not all modifications produce beneficial results. Recent work has demonstrated that modification of GIC powder with nano-particles has many beneficial effects on the properties of the material. This is due to the increase in surface area and surface energy, along with better particle distribution of the nano-particle. Therefore, more focus should be given on nano-particle having greater chemical affinity for GIC matrix as well as the tooth structure that will enhance the physicochemical properties of GIC.
  11. Moheet IA, Luddin N, Ab Rahman I, Masudi SM, Kannan TP, Nik Abd Ghani NR
    Polymers (Basel), 2021 Oct 12;13(20).
    PMID: 34685263 DOI: 10.3390/polym13203504
    One of the foremost missions in restorative dentistry is to discover a suitable material that can substitute lost and damaged tooth structure. To this date, most of the restorative materials utilized in dentistry are bio-inert. It is predicted that the addition of nano-HA-SiO2 to GIC matrix could produce a material with better ion-exchange between the restorative material and natural teeth. Therefore, the aim of the current study was to synthesize and investigate the transfer of specific elements (calcium, phosphorus, fluoride, silica, strontium, and alumina) between nano-hydroxyapatite-silica added GIC (nano-HA-SiO2-GIC) and human enamel and dentine. The novel nano-hydroxyapatite-silica (nano-HA-SiO2) was synthesized using one-pot sol-gel method and added to cGIC. Semi-quantitative energy dispersive X-ray (EDX) analysis was carried out to determine the elemental distribution of fluorine, silicon, phosphorus, calcium, strontium, and aluminum. Semi-quantitative energy dispersive X-ray (EDX) analysis was performed by collecting line-scans and dot-scans. The results of the current study seem to confirm the ionic exchange between nano-HA-SiO2-GIC and natural teeth, leading to the conclusion that increased remineralization may be possible with nano-HA-SiO2-GIC as compared to cGIC (Fuji IX).
  12. Mohd Bakhori SK, Mahmud S, Ling CA, Sirelkhatim AH, Hasan H, Mohamad D, et al.
    Mater Sci Eng C Mater Biol Appl, 2017 Sep 01;78:868-877.
    PMID: 28576061 DOI: 10.1016/j.msec.2017.04.085
    ZnO with two different morphologies were used to study the inhibition of Streptococcus sobrinus and Streptococcus mutans which are closely associated with tooth cavity. Rod-like shaped ZnO-A and plate-like shaped ZnO-B were produced using a zinc boiling furnace. The nanopowders were characterized using energy filtered transmission electron microscopy (EFTEM), X-ray diffraction (XRD), photoluminescence (PL) spectroscopy, Raman spectroscopy and dynamic light scattering (DLS) to confirm the properties of the ZnO polycrystalline wurtzite structures. XRD results show that the calculated crystallite sizes of ZnO-A and ZnO-B were 36.6 and 39.4nm, respectively, whereas DLS revealed particle size distributions of 21.82nm (ZnO-A) and 52.21nm (ZnO-B). PL spectra showed ion vacancy defects related to green and red luminescence for both ZnO particles. These defects evolved during the generation of reactive oxygen species which contributed to the antibacterial activity. Antibacterial activity was investigated using microdilution technique towards S. sobrinus and S. mutans at different nanopowder concentrations. Results showed that ZnO-A exhibited higher inhibition on both bacteria compared with ZnO-B. Moreover, S. mutans was more sensitive compared with S. sobrinus because of its higher inhibition rate.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links