The aim of this study was to investigate the effects of dual modification on the functional, microstructural, and thermal properties of tapioca starch. Tapioca starch was first hydrolyzed by 0.14 M HCl for 0, 6, 12, 18, and 24 hr and then hydroxypropylated by adding 0%, 10%, 20%, and 30% (v/w) propylene oxide. The degree of hydroxypropylation, solubility, water absorption, rheological, thermal, and microstructure characterization of dually modified tapioca starch was determined. Hydroxypropylation did not cause any considerable changes in the starch granular size and shape of tapioca starch. Acid hydrolysis disrupts the starch granules, and the starches with smaller sizes were produced. The degree of molar substitution (DS) of dual modified starches ranged from 0.118 to 0.270. The dual modified starches significantly had higher solubility than native starch (p
The aim of this study was to develop sago starch-based bionanocomposite films containing TiO2 nanoparticles and Penganum harmala extract (PE) to increase the shelf life of chicken fillets. First, sago starch films containing different levels of TiO2 nanoparticles (1, 3, and 5%) and PE (5, 10, and 15%) were prepared. The barrier properties and antibacterial activity of the films against different bacteria strains were investigated. Then, the produced films were used for the chicken fillets packaging, and the physicochemical and antimicrobial properties of fillets were estimated during 12-day storage at 4 °C. The results showed that the addition of nano TiO2 and PE in the films increased the antibacterial activity against gram-positive (S. aureus) higher than gram-negative (E. coli) bacteria. The water vapor permeability of the films decreased from 2.9 to 1.26 (×10-11 g/m·s·Pa) by incorporating both PE and nano TiO2. Synergistic effects of PE and nano TiO2 significantly decreased the oxygen permeability of the sago starch films from 8.17 to 4.44 (cc.mil/m2·day). Application results of bionanocomposite films for chicken fillet storage at 4 °C for 12 days demonstrated that the films have great potential to increase the shelf life of fillets. The total volatile basic nitrogen (TVB-N) of chicken fillets increased from 7.34 to 35.28 after 12 days, whereas samples coated with bionanocomposite films increased from 7.34 to 16.4. For other physicochemical and microbiological properties of chicken fillets, similar improvement was observed during cold storage. It means that the bionanocomposite films could successfully improve the shelf life of the chicken fillets by at least eight days compared to the control sample.
In this research, the antioxidant and antibacterial activities of active films based on potato starch containing Viola odorata extract (VOE) were investigated both in vitro and in chicken fillets. The VOE was added to the starch film formulation at 0, 1, 2, and 3% (w/v). The results showed that by increasing the extract level, the total phenol content and antioxidant and antibacterial activity of the films against Escherichia coli, Staphylococcus aureus, and Salmonella typhimurium improved remarkably. The results of the meat tests indicated the significant antioxidant and antimicrobial activity of active films containing different levels of VOE in chicken fillets, and a direct relationship was observed between the concentration of the extract and the functional activity of the films, so with the increase in the concentration of the extract in the films, the rate of lipid oxidation and growth of microorganisms in the chicken fillets decreased significantly during the storage period, and less volatile nitrogen bases, metmyoglobin, and oxidation products were produced in the fillets. In general, the results of this research demonstrated that an active film based on potato starch containing VOE (especially 2 and 3% levels) has the ability to extend the oxidative and microbiological shelf life of chicken fillets during cold storage for at least eight days.
The aim of this research was to evaluate the effect of active polyethylene film (PE) containing linalool and thymol active components on the microbial shelf life of mozzarella cheese. PE films containing different concentrations of linalool or thymol (0%, 1%, 1.5% and 2%) were prepared. The antimicrobial properties of the films were examined, and mozzarella cheese was packed with these active films. The antimicrobial properties of packed samples during 30 days of storage were studied. The obtained results from film tests showed that by increasing the concentration of active agents (linalool and thymol) in PE films, the antimicrobial activities of film samples against Escherichia coli, Staphylococcus aureus, Listeria innocua, and Saccharomyces cervicea were increased. The cheese tests result demonstrated that mozzarella cheese packaging with PE films containing different concentrations of linalool and thymol leads to a decreased growth rate of molds and yeasts in cheeses. At the end of the storage period, the lowest number of molds and yeasts was for a sample packed in PE film containing 2% thymol, which increased from 1.00 to 1.21 Log CFU/g during the storage period. From E. coli and S. aureus contamination, the samples packed in active films were safe until the last day of storage (30th day), while the control sample was unacceptable at 17th day of storage. According to obtained results from this study, it was concluded that the addition of linalool and thymol active components to PE film had a positive effect on the extension of the mozzarella scheese shelf life.
The purpose of this study was to evaluate the effects of a combination of zinc oxide (ZnO-N) nanoparticles and fennel essential oil (FEO) on the functional and antimicrobial properties of potato starch films. Films based on potato starch containing a combination of ZnO-N (1, 3, and 5%(w/w)) and FEO (1, 2, and 3% (w/w)) produced by casting method and water solubility, water absorption capacity (WAC), barrier properties, mechanical properties, color indexes, and antimicrobial activity of the films against Staphylococcus aureus, Escherichia coli, and Aspergillus flavus were studied. The combination of ZnO-N and FEO had a significant decreasing effect on solubility, WAC, water vapor and oxygen permeability, elongation, and L* index. These additives had an increasing impact on tensile strength, Yang's modulus, and a* and b* indexes (p
This study investigated the possibility of using active coatings based on Zedo gum containing essential oils of Zataria multiflora Boiss (ZE) and tarragon (TE) to increase the shelf life and maintain the quality of freshly cut potato strips. The chemical compositions of ZE and TE were initially identified, and their antioxidant and antimicrobial activities were investigated. ZE consisted mainly of carvacrol (26.26%), p-cymene (21.50%), thymol (18.05%), and linalool (11.31%), and those of TE comprised p-allylanisole (81.92%), β-Ocimene E (8.06%), and β-Ocimene Z (5.35%). Afterwards, a Zedo gum active coating (1% v/w) containing 1% (v/v) essential oil was prepared, and the produced coating solutions were used to soak the potato strips for 5 min. The coated potatoes were kept fresh in a refrigerator for 9 days, and their quality characteristics were examined every 3 days. The results show that the weight loss, browning index, total microbial count, and mold and yeast counts in the strips increased during 9 days of cold storage, and hardness decreased (p
The purpose of this study was to evaluate the effect of nano-zinc oxide (ZnO-N) morphology on the functional and antimicrobial properties of tapioca starch films. For this reason, nanosphere (ZnO-ns), nanorod (ZnO-nr), and nanoparticle of ZnO (ZnO-np) at 0.5%, 1.0%, and 2.0% were added to the starch film. Then, physicochemical, mechanical, and barrier properties were evaluated. Also, UV-visible and Fourier transform infrared spectroscopy (FTIR) spectra and antibacterial activity of prepared nanocomposite films against Escherichia coli were examined. The results revealed that the ZnO-ns had the most effects on mechanical, physicochemical, and barrier properties. The highest values of the tensile strength (14.15 MPa) and Young's modulus (32.74 MPa) and the lowest values of elongation at break (10.40%) were obtained in the films containing 2% of ZnO nanosphere. In terms of UV transmission, ZnO-nr showed the most significant impact morphology. FTIR spectra indicated that interactions for all morphologies were physical interaction, and there are no chemical reactions between starch structure and nanoparticles. The antibacterial effect of the ZnO-ns was higher than that of other morphologies. In summary, ZnO-ns was the best morphology for using ZnO-N in starch-based nanocomposite films.
Edible duck feet gelatin (DFG)-based biocomposites with different glycerol (GLY) contents (15%, 25%, and 35% of dried DFG) were prepared. Physicochemical, mechanical, barrier, and heat seal properties of DFG films were characterized and compared as an alternative to bovine gelatin film. Increasing glycerol from 15 to 35% decreased the TS and YM and EB and HS increased, in value of 42.54-7.27 and 1240-157.10MPa and 22.82-50.33% and 42.06-347.15N/m respectively. The water vapor permeability (WVP) and oxygen permeability (OP) of films were increased from 4.78 to 5.6×10-11gm-1Pa-1s-1 and from 3.97 to 33.99cm3mμ/m2 d kPa respectively. GAB model estimations showed monolayer water content of films increased with the increase of plasticizer content. Moisture sorption isotherm modelling exhibited a type II BET classification. Fourier transform infrared (FTIR) spectra showed shifted peak at approximately 1024cm-1, which was related to glycerol. The results show that the properties of DFG film are suitable for use as an alternative material to bovine gelatin film.
In this study, the physicochemical, mechanical, and antimicrobial activities of polyethylene (PE) films coated with peppermint (Menthol) and Origanum vulgare (Carvacrol) essential oil were evaluated. For this reason, PE films were coated with MC-HPMC solution containing different concentrations of menthol and carvacrol (0, 1, 1.5, and 2%), and mechanical, electromagnetic, barrier, and antimicrobial properties of all prepared films were examined. The obtained results demonstrated that by increasing the concentration of menthol and carvacrol in film coatings, tensile strength (from 36 to 23 MPa), water vapor permeability (from 12 to 11 g.m-1s-1Pa-1), and L* and b* indexes were decreased, while the oxygen permeability (OP) and elongation at break significantly were increased (p
In the current study, fish gelatin-based nanofiber mats were embedded with different bioactive agents (BAs) such as cinnamaldehyde (CEO), limonene (LEO), and eugenol (EEO) at 1, 3, and 5% via electrospinning, and their effects on the morphological, structural, mechanical, thermal, antioxidant, antimicrobial, and bread packaging properties of the mats were evaluated. The gelatin mats presented different physicochemical properties due to the inherent differences in the chemical structure of the added BAs and their interaction with the gelatin chains. The conductivity, surface tension, and viscosity of gelatin dopes changed with the presence of the BAs, yet the electrospun nanofibers showed defect-free uniform morphology as confirmed by electron microscopy, with no significant change in the chemical structure of gelatin. The melting temperature of gelatin mats remained in the range of 187-197°C. The mats presented lower tensile strength and elongation at break by the addition of BAs compared with the pristine gelatin mat. The highest radical scavenging (90%) was yielded by mats with EEO, while mats with CEO depicted better antibacterial activity with an inhibition zone of 18.83 mm. However, a dose-dependent increase in the antifungal properties was noticed for all the mats. The mats retained almost 50% of BAs after 60 days of storage at 45% relative humidity. Electrospun gelatin mats inhibited the aerobic bacteria (81%) and yeast and molds (61%) in preservative-free bread after 10 days of storage.
Pistachio is a nut with high consumption that could be affected by aflatoxin contamination, which affects the consumption market; therefore, broad studies seem to be necessary for this area. In the current study, pistachio nuts (Abbasali variety) were coated with different concentrations (0.1%, 0.5%, 1%, and 2%) of methylcellulose (MC) by immersion method and then stored in the incubator (25°C) for four months. The inhibitory effect of hydrocolloid coating on microbial (mold, yeast, and total count) and aflatoxin (B1, B2, G1, G2, and total aflatoxin) contamination, as well as sensory attributes (flavor, color, crispiness, aroma, and total acceptability), was investigated during storage periods. Results showed that the storage period had a significant effect on yeast, mold, and total count. HPLC analysis results showed that coating with MC had a significant inhibitory effect on aflatoxin contamination, and the highest amount of aflatoxin contamination was related to the control sample (3.5%). All samples except sample coated with MC 0.5% had appropriate total acceptability. Regarding the inhibitory effect of MC edible coating on aflatoxin contamination, its application on pistachio nut could be a promising approach to control the fungus infection and reduce aflatoxin production in coated pistachio.
This study aimed to assess the impact of an edible coating holding within chia seed gum (CSG) and Rosa canina L. extract (RCE) nanoemulsions (10%, 20%, and 40% w/w) on the oxidation, microbial load, and sensory characteristics of burgers in a 90-day frozen storage period. Based on the findings, the active CSG coatings showed remarkable antioxidant and antimicrobial activities. By increasing the level of RCE nanoemulsions, the functional activity of coatings significantly increased (P
Nowadays, the development of pH-sensitive smart edible films using biopolymers and natural plant extracts (especially those rich in anthocyanins) has attracted much attention. Therefore, in this study, the intelligent edible film was produced and characterized using cassava starch and pomegranate peel powder (PPP) and the possibility of using production films to monitor the freshness of lamb meat. The smart films were prepared using different concentrations of PPP (2, 4, 6, and 8% w/w) and the solvent casting method. The results showed that the incorporation of PPP had a significant effect on the mechanical parameters of the starch films. With increasing the levels of PPP, the color of the films became darker and redder. Increasing the PPP levels also led to an increase in total phenol content (TPC) (from 0 to 13 mg GAE (gallic acid equivalent)/g) and antioxidant activity (from 0% to 70% DPPH (1,1-diphenyl-2-picryl hydrazyl) radical scavenging) of the produced films (p
Fouling deposition in the coconut cream emulsion (CCE) is considered a severe technical issue in the industry. Since the fouling deposition results from the heating effect on the CCE bulk, the heat-induced structural changes in the CCE bulk at different temperatures were rheologically investigated in the first part of this study. The second part applied different heat treatment conditions to investigate generated fouling deposition (GFD). Chemical composition, FTIR, and SEM imaging were used to explore GFDs thoroughly. The increase in viscosity and storage modulus (G') reflect such heat-induced changes over the experimental conditions. More structural changes were predicted at around ≥85°C, accompanied by a sharp increase in viscosity and (G'), which was associated with the gelation of CCE. The conformational transition, fat agglomeration in CCE bulk, generated fouling deposits (GFDs) were significant around 70°C. The chemical composition of the GFD has shown an increasing trend in the protein, carbohydrates, and ash, meanwhile fluctuation in the fat contents with increasing temperature. The FTIR peaks showed novel peaks around temperature ≥85°C, which implied new amide groups or new protein conformation. The SEM images provided the different microstructures of GFDs at high-temperature levels. More likely the GFDs appeared at temperature ≥85°C are a gel deposit layer. These findings strongly suggest that emulsion gelation was the primary cause of coconut cream fouling.
In this study, a pH-sensitive indicator based on fish gelatin and Coleus scutellarioides anthocyanin extract (CSAE) was prepared and characterized. Films were prepared using the solvent casting method and different levels of CSAE, including 10 ml (CSG1), 20 ml (CSG2), and 30 ml (CSG3), and 0 ml (CSG0) as a control sample. The mechanical, optical, and pH sensing of active films and the release of anthocyanins from the films were investigated. The relationship between the total volatile basic nitrogen (TVB-N) of fish fillets and a* color index of films was studied. By incorporation of CSAE, the flexibility of films increased, while the tensile strength and UV-Vis light transmittance through the films decreased (p
Composite sago starch-based system was developed and characterized with the aim to find an alternative to gelatin in the processing of pharmaceutical capsules. Dually modified (Hydrolyzed-Hydroxypropylated) sago starches were combined with κ-carrageenan (0.25, 0.5, 0.75, and 1%). The rheological properties of the proposed composite system were measured and compared with gelatin as reference material. Results show that combination of HHSS12 (Hydrolysed-hydroxypropylated sago starch at 12h) with 0.5% κ-carrageenan was comparable to gelatin rheological behavior in pharmaceutical capsule processing. The solution viscosity at 50 °C and sol-gel transition of the proposed composite system were comparable to those of gelatin. The viscoelastic moduli (G' and G") for the proposed system were lower than those of gelatin. These results illustrate that by manipulation of the constituents of sago starch-based composite system, a suitable alternative to gelatin can be produced with comparable properties and this could find potential application in pharmaceutical capsule industry.
The development of intelligent packaging based on natural and biodegradable resources is getting more attention by researchers in recent years. The aim of this study was to develop and characterize a pH-sensitive films based on sago starch and incorporated with anthocyanin from torch ginger. The pH-sensitive films were fabricated by casting method with incorporation of different torch ginger extract (TGE) concentration. The surface morphology, physicochemical, barrier, and mechanical properties as well as the pH-sensitivity of films were investigated. The film with the highest concentration of TGE showed the lowest tensile strength (4.26 N/m2), toughness (2.54 MJ/m3), Young's modulus (73.96 MPa) and water vapour permeability (2.6 × 10-4 g·m/day·kPa·m2). However, its elongation at break (85.14%), moisture content (0.27%) and water solubility (37.92%) were the highest compared to other films. pH sensitivity analysis showed that the films containing TGE extract, changes in colour by changing the pH. The colour of films changed from pink to slightly green as the pH increased from pH 4 to 9. Thus, the developed pH-sensitive film with torch ginger extract has potential as intelligent packaging for detection of food freshness or spoilage to ensure their quality and safe consumption.
The aim of this study was development a composite film based on sago starch and κ-carrageenan to find a gelatin alternative in the pharmaceutical capsules processing. Hydrolyzed-Hydroxypropylated (dually modified) sago starch was mixed with κ-carrageenan (0.25, 0.5, 0.75, and 1%). The drying kinetics, thermomechanical, physicochemical, and barrier properties of composite films were estimated and compared with bovine gelatin. Results show that drying kinetics and mechanical properties of the composite films were comparable to those of gelatin. The water vapor permeability and moisture content of the composite films were lower than those of gelatin. The solubility of the composite films was higher than that of gelatin, and the composite films were more stable at higher relative humidity than were the gelatin films. These results show that dually modified sago starch in combination with κ-carrageenan has properties similar to those of gelatin, thus proposed system can be used in pharmaceutical capsules processes.
Coronaviruses, which have been enveloped nonsegmented positive-sense RNA viruses, were first mentioned in the mid-1960s and can attack people as well as a wide range of animals (including mammals and birds). Three zoonotic coronaviruses have been identified as the cause of large-scale epidemics over the last two decades: Middle East respiratory syndrome (MERS), severe acute respiratory syndrome (SARS), and swine acute diarrhea syndrome (SADS). Epithelial cells in the respiratory and gastrointestinal tract are the principal targeted cells, and viral shedding occurs via these systems in diverse ways such as through fomites, air, or feces. Patients infected with the novel coronavirus (2019-nCoV) reported having visited the Wuhan seafood wholesale market shortly before disease onset. The clinical data on established 2019-nCoV cases reported so far indicate a milder disease course than that described for patients with SARS-CoV or MERS-CoV. This study aimed to review radiation inactivation of these viruses in the food industry in three sections: visible light, ionizing radiation (alpha ray, beta ray, X-ray, gamma ray, neutron, plasma, and ozone), and nonionizing radiation (microwave, ultraviolet, infrared, laser light, and radiofrequency). Due to the obvious possibility of human-to-human and animal-to-human transmission, using at least one of these three methods in food processing and packaging during coronavirus outbreaks will be critical for preventing further outbreaks at the community level.
New packaging materials are an emerging field in the food industry. Poor thermal, mechanical, chemical, and physical properties of biopolymers, and also their inherent permeability to gases and vapor have increased this interest. Biopolymeric materials (matrix) require fillers, which can react/interact with available matrix in order to provide new formulations with improved properties. Many studies have shown the potential use of metal nanoparticles in biopolymeric packaging and edible coatings for improving their properties. The current review summarizes the characterization of bio-nanocomposite films and edible coatings incorporated with metal nanoparticles on the shelf life and quality of tropical fruits, berries, climacteric/non-climacteric fruits and vegetables. It also provides a brief description of some advantages of bio-nanocomposite films and edible coatings applied to fruits and vegetables such as decreasing the color changes, respiration rate, weight loss and extended shelf life, delaying ripening and being environmentally friendly. The results of recent reports provide a better understanding of the impact of metal nanoparticles incorporated in biopolymers on the shelf life and the quality of fruits and vegetables.