The fuel crisis and environmental concerns, mainly due to global warming, have led researchers to consider the importance of biofuels such as biodiesel. Vegetable oils, which are too viscous to be used directly in engines, are converted into their corresponding methyl or ethyl esters by a process called transesterification. With the recent debates on "food versus fuel," non-edible oils, such as Jatropha curcas, are emerging as one of the main contenders for biodiesel production. Much research is still needed to explore and realize the full potential of a green fuel from J. curcas. Upcoming projects and plantations of Jatropha in countries such as India, Malaysia, and Indonesia suggest a promising future for this plant as a potential biodiesel feedstock. Many of the drawbacks associated with chemical catalysts can be overcome by using lipases for enzymatic transesterification. The high cost of lipases can be overcome, to a certain extent, by immobilization techniques. This article reviews the importance of the J. curcas plant and describes existing research conducted on Jatropha biodiesel production. The article highlights areas where further research is required and relevance of designing an immobilized lipase for biodiesel production is discussed.
Extensive studies have been carried out on the effect of temperature and salt concentration on the theological behavior of whey proteins and different starches individually, but not on mixed dispersions of whey protein isolates and starches. In the present studies, the rheological behavior of cross-linked waxy maize starch and whey protein isolate mixed dispersions during heating at 60-85 degrees C was investigated. Further, the effect of CaCl2 (25-100 mM ionic strengths) on the gelatinization of these dispersions was determined. It was found that at a 2:3 ratio and a 3:2 ratio of cross-linked waxy maize starch to whey protein isolate mixed gels form a compatible networkmM concentration the solution viscosity was higher.
In Malaysia, first-contact, primary care is provided by parallel public and private sectors, which are completely separate in organization, financing and governance. As the country considers new approaches to financing, including using public schemes to pay for private care, it is crucial to examine the quality of clinical care in the two sectors to make informed decisions on public policy. This study intends to measure and compare the quality of clinical care between public and private primary care services in Malaysia and, to the extent possible, assess quality with the developed economies that Malaysia aspires to join. We carried out a retrospective analysis of the National Medical Care Survey 2014, a nationally representative survey of doctor-patient encounters in Malaysia. We assessed clinical quality for 27 587 patient encounters using data on 66 internationally validated quality indicators. Aggregate scores were constructed, and comparisons made between the public and private sectors. Overall, patients received the recommended care just over half the time (56.5%). The public sector performed better than the private sector, especially in the treatment of acute conditions, chronic conditions and in prescribing practices. Both sectors performed poorly in the indicators that are most resource intensive, suggesting that resource constraints limit overall quality. A comparison with 2003 data from the USA, suggests that performance in Malaysia was similar to that a decade earlier in the USA for common indicators. The public sector showed better performance in clinical care than the private sector, contrary to common perceptions in Malaysia and despite providing worse consumer quality. The overall quality of outpatient clinical care in Malaysia appears comparable to other developed countries, yet there are gaps in quality, such as in the management of hypertension, which should be tackled to improve overall health outcomes.
A comparative study on the stability and potential of alginate and pectin based beads for production of poultry probiotic cells using MRS medium in repeated batch fermentation was conducted. The bead cores, made of three types of materials, i.e., ca-alginate, ca-pectinate and ca-alginate/pectinate, were compared. The effect of single and double layer coatings using chitosan and core material, respectively, on the bead stability and cell production were also studied. The pectin based beads were found to be more stable than that of the alginate beads and their stability was further improved by coating with chitosan. The cell concentration in pectin based beads was comparable to that in the alginate beads. On the other hand, pectin based beads gave significantly lower cell concentration in the growth medium for the initial fermentation cycles when compared to the alginate beads. In conclusion, pectin was found to be potential encapsulation material for probiotic cell production owing to its stability and favourable microenvironment for cell growth.
The aim of this work was to develop prediction models for shape and size of ca-alginate macrobeads produced through extrusion-dripping method. The relationship between the process variables on the shape and size of the alginate drops before and after gelation was established with the aid of image analysis. The results show that a critical Ohnersorge number (Oh)>0.24 was required to form spherical beads. The shape transition of ca-alginate beads could be typically distinguished into three phases along the collecting distance and it was affected by the combined influence of the solution properties, the collecting distance and the drop size. Mathematical equations and a master shape diagram were developed to reveal a clear operating region and the overall process limits within which spherical ca-alginate beads could be formed. In terms of bead size, the overall size correction factor (K) which accounted for the liquid loss factor (k(LF)) and the shrinkage factor (k(SF)), varied between 0.73 and 0.85 under the experimental conditions. The size prediction model correlated well with the experimental data. The approach and the outcome could be used as a model to develop prediction tools for similar bead production systems.
Increase in volume of biodiesel production in the world scenario proves that biodiesel is accepted as an alternative to conventional fuel. Production of biodiesel using alkaline catalyst has been commercially implemented due to its high conversion and low production time. For the product and process development of biodiesel, enzymatic transesterification has been suggested to produce a high purity product with an economic, environment friendly process at mild reaction conditions. The enzyme cost being the main hurdle can be overcome by immobilization. Immobilized enzyme, which has been successfully used in various fields over the soluble counterpart, could be employed in biodiesel production with the aim of reducing the production cost by reusing the enzyme. This review attempts to provide an updated compilation of the studies reported on biodiesel production by using lipase immobilized through various techniques and the parameters, which affect their functionality.
Malaysia has made substantial progress in providing access to health care for its citizens and has been more successful than many other countries that are better known as models of universal health coverage. Malaysia's health care coverage and outcomes are now approaching levels achieved by member nations of the Organization for Economic Cooperation and Development. Malaysia's results are achieved through a mix of public services (funded by general revenues) and parallel private services (predominantly financed by out-of-pocket spending). We examined the distributional aspects of health financing and delivery and assessed financial protection in Malaysia's hybrid system. We found that this system has been effective for many decades in equalizing health care use and providing protection from financial risk, despite modest government spending. Our results also indicate that a high out-of-pocket share of total financing is not a consistent proxy for financial protection; greater attention is needed to the absolute level of out-of-pocket spending. Malaysia's hybrid health system presents continuing unresolved policy challenges, but the country's experience nonetheless provides lessons for other emerging economies that want to expand access to health care despite limited fiscal resources.
The aim of this work was to develop a standard quantitative method to measure the acid tolerance of probiotic cells when exposed to a simulated gastric fluid. Three model strains of different cell concentrations were exposed to a standard simulated gastric fluid of fixed volume. The fluid pH ranged from pH 1.5 to 2.5. In general, the death kinetics followed an exponential trend. The overall death constant, k (d), for all strains was found to be in a power relationship with the pH value and the initial cell concentration, and it can be expressed as k(d)=k(AII) (pH(-9.0)N(0)(-0.19)) where k (AII) is defined as the acid intolerance indicator and N (0) is the initial cell concentration (CFU/ml). This equation was validated with the experimental data with an average R (2) of 0.98. The acid intolerance of cells can be quantitatively expressed by the k (AII) values, where higher value indicates higher intolerance. In conclusion, a standard quantitative method has been developed to measure the acid tolerance of probiotic cells. This could facilitate the selection of probiotic strains and processing technologies.
Out-of-pocket (OOP) payments are the principal means of financing health care throughout much of Asia. We estimate the magnitude and distribution of OOP payments for health care in fourteen countries and territories accounting for 81% of the Asian population. We focus on payments that are catastrophic, in the sense of severely disrupting household living standards, and approximate such payments by those absorbing a large fraction of household resources. Bangladesh, China, India, Nepal and Vietnam rely most heavily on OOP financing and have the highest incidence of catastrophic payments. Sri Lanka, Thailand and Malaysia stand out as low to middle income countries that have constrained both the OOP share of health financing and the catastrophic impact of direct payments. In most low/middle-income countries, the better-off are more likely to spend a large fraction of total household resources on health care. This may reflect the inability of the poorest of the poor to divert resources from other basic needs and possibly the protection of the poor from user charges offered in some countries. But in China, Kyrgyz and Vietnam, where there are no exemptions of the poor from charges, they are as, or even more, likely to incur catastrophic payments.