MyMedR

Displaying all 9 publications

Abstract:

Sort:

Dependence of crack shape in loaded articular cartilage on the collagenous structure

Al-Saffar Y, Moo EK, Pingguan-Murphy B, Matyas J, Korhonen RK, Herzog W

Connect Tissue Res, 2023 May;64(3):294-306.
PMID: 36853960 DOI: 10.1080/03008207.2023.2166500

Cartilage cracks disrupt tissue mechanics, alter cell mechanobiology, and often trigger tissue degeneration. Yet, some tissue cracks heal spontaneously. A primary factor determining the fate of tissue cracks is the compression-induced mechanics, specifically whether a crack opens or closes when loaded. Crack deformation is thought to be affected by tissue structure, which can be probed by quantitative polarized light microscopy (PLM). It is unclear how the PLM measures are related to deformed crack morphology. Here, we investigated the relationship between PLM-derived cartilage structure and mechanical behavior of tissue cracks by testing if PLM-derived structural measures correlated with crack morphology in mechanically indented cartilages.
METHODS: Knee joint cartilages harvested from mature and immature animals were used for their distinct collagenous fibrous structure and composition. The cartilages were cut through thickness, indented over the cracked region, and processed histologically. Sample-specific birefringence was quantified as two-dimensional (2D) maps of azimuth and retardance, two measures related to local orientation and degree of alignment of the collagen fibers, respectively. The shape of mechanically indented tissue cracks, measured as depth-dependent crack opening, were compared with azimuth, retardance, or "PLM index," a new parameter derived by combining azimuth and retardance.
RESULTS: Of the three parameters, only the PLM index consistently correlated with the crack shape in immature and mature tissues.
CONCLUSION: In conclusion, we identified the relative roles of azimuth and retardance on the deformation of tissue cracks, with azimuth playing the dominant role. The applicability of the PLM index should be tested in future studies using naturally-occurring tissue cracks.

Matched MeSH terms: Microscopy, Polarization/methods
Fulltext Compensated polarised microscopy: a simple and cheap modification

Veerapen K, Ch'ng SL

Med J Malaysia, 1987 Sep;42(3):217-8.
PMID: 3509837
Matched MeSH terms: Microscopy, Polarization/instrumentation*
Influence of the loci of non-cavitated fissure caries on its detection with optical coherence tomography

Zain E, Zakian CM, Chew HP

J Dent, 2018 04;71:31-37.
PMID: 29378225 DOI: 10.1016/j.jdent.2018.01.009

OBJECTIVE: The main objective of this study was to evaluate the accuracy of optical coherence tomography (OCT) in detecting naturally occurring non-cavitated fissure caries (NCFC) in totality and at different loci by visually assessing cross-sectional OCT scans (B-scan) with an interpretation criterion. The secondary objective was to evaluate the agreement between dimensions of NCFC measured with OCT and polarized light microscopy (PLM).
METHODS: 71 investigation sites of sound fissure and naturally occurring NCFC on human extracted premolars were identified and scanned with a swept-source OCT. The teeth were then sectioned bucco-lingually at the investigation sites and imaged using PLM. Two calibrated examiners trained on the B-scan NCFC visual interpretation criteria established for this study, assessed the investigation sites and results were validated against PLM.
RESULTS: Detection sensitivity of B-scan for NCFC when fissures were assessed in totality, or on the slopes or walls separately are 0.98, 0.95, 0.94 and specificity are 0.95, 0.90, and 0.95. One-way ANOVA showed that width measurements of wall loci done with OCT and PLM were not statistically different. However, OCT height measurements of slope loci were statistically bigger with a constant bias of 0.08 mm (of which is not clinically significant) and OCT height measurements of wall loci were statistically smaller (0.57 mm) and Bland-Altman plots indicated presence of proportionate bias.
CONCLUSION: Visual assessment of B-scans with the interpretation criteria resulted in both high specificity and sensitivity and were not affected by loci location. OCT width measurement of wall loci is in agreement with PLM.
CLINICAL SIGNIFICANCE: Unanimous high sensitivity in this and previous studies indicate that visual assessment of B-scans reliably rule out NCFC. Detection accuracy was not affected by loci location. Width of wall loci and/or height of slope loci in OCT B-scan are to be used for monitoring NCFC but not height of wall loci.

Matched MeSH terms: Microscopy, Polarization/methods
Sperm attributes and morphology on Rusa timorensis: light and scanning electron microscopy

Mahre MB, Wahid H, Rosnina Y, Jesse FF, Azlan CA, Khumran AM, et al.

Anim. Reprod. Sci., 2014 Aug;148(3-4):245-50.
PMID: 25015846 DOI: 10.1016/j.anireprosci.2014.06.006

This study provides standard information on the attributes of sperm and describes the surface structure of normal and abnormal spermatozoa of Rusa timorensis. Two fertile stags were used as the source of semen collected during the first breeding season commencing from April 5 to July 2, 2012. Another five stags were used as the source of semen collected during the second breeding season commencing from April 1 to June 27, 2013. Semen samples were collected from the stags using an electro-ejaculator. The ejaculate was processed and samples prepared for light and scanning electron microscopy (SEM) according to standard methods. No significant difference (P>0.05) was found between sperm attributes in comparison between different stags and different months of the fertile seasons. The results of this study have also demonstrated that there are no differences in size, shape and surface structure between spermatozoa of the different stags and different months of the fertile seasons. Sperm attributes (volume, pH, sperm concentration, general motility, progressive motility and viability) were 2.2±0.29 ml, 7.2±0.17, 886.3±39.7×10(6) spermatozoa/ml, 78.7±2.01%, 80.8±1.85% and 83.2±0.85%, respectively. Morphological analysis showed low percentage of abnormal spermatozoa 13.9±2.88%. Scanning electron microscopy revealed spermatozoa which consisted of a flat paddle-shaped head, short neck and a tail, which was subdivided into midpiece, principal piece and endpiece. The average spermatozoon was 66.2±0.69 μm in total length. The flat paddle-shaped head was 7.8±0.28 μm long, 4.2±0.15 μm at its widest width, 2.4±0.18 μm basal width and 0.7±0.0 2μm thick. As for the tail, the midpiece length was 13.2±0.14 μm, 0.6±0.04 μm in diameter; the principal piece was 42.6±0.04μm, and 2.8±0.06 μm for the endpiece. Abnormal spermatozoa such as tapered head, microcephalic head, decapitated spermatozoa and bent tails were observed. Results provide standard information useful for development of strategies for semen cryopreservation and assisted reproductive technology in this species.

Matched MeSH terms: Microscopy, Polarization
Deuterium NMR Investigation of the lyotropic phases of alkyl β-glycoside/D2O systems

Misran O, Timimi BA, Heidelberg T, Sugimura A, Hashim R

J Phys Chem B, 2013 Jun 20;117(24):7335-44.
PMID: 23718628 DOI: 10.1021/jp401787b

We have investigated the phase behavior of four glycosides (βC8OGlc, βC8SGlc, βC10OGlc, βC8OGal) in water and D2O by optical polarizing microscopy and deuterium NMR. Previously published phase diagrams were evaluated by deuterium NMR, via monitoring D2O spectra, and confirmed the presence of the hexagonal, bicontinuous cubic, and lamellar phases in these glycosides. We have also shown the presence of the gel phase in (βC10OGlc) and observed the extensive supercooling of the lamellar phase to temperatures well below the Kraft line. While the main features of the phase diagrams were confirmed, some phase boundaries were found to be slightly different. Magnetically aligned spectra were also observed for relatively dilute samples for the hexagonal phase (βC8OGlc and βC8OGal) and the lamellar phase (βC8SGlc and βC10OGlc). The average number of bound water molecules per headgroup in the lamellar phase for the glycosides was determined by the systematic measurement of the quadrupolar splitting of D2O over a wide range of values of the (glycoside/water) molar ratio. The number of water molecules bound to the headgroup was found on average to be about 1.6-1.7 water molecules with no significant differences in this value for the different glycosides (and over the temperature range investigated), indicating that the bound water content is predominately influenced by the number of hydroxyl groups of the headgroup only. However, this bound water content of only 1.6-1.7 water molecules per sugar headgroup is surprisingly low, suggesting strong intermolecular interactions of the OH groups of headgroup sugars. The results are in line with computational results reported earlier for the octyl-β-glucoside and β-galactoside, which show the presence of strong intralayer hydrogen bonding.

Matched MeSH terms: Microscopy, Polarization
Fulltext Synthesis of new liquid crystalline diglycidyl ethers

Mohammed IA, Hamidi RM

Molecules, 2012 Jan 10;17(1):645-56.
PMID: 22233565 DOI: 10.3390/molecules17010645

The phenolic Schiff bases I-VI were synthesized by condensation reactions between various diamines, namely o-dianisidine, o-tolidine and ethylenediamine with vanillin or p-hydroxybenzaldehyde and subsequent reactions between these phenolic Schiff bases and epichlorohydrin to produce new diglycidyl ethers Ia-VIa. The structures of these compounds were confirmed by CHN, FT-IR, (1)H-NMR, and (13)C-NMR spectroscopy. Their thermotropic liquid crystalline behavior was studied using differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). All the diglycidyl ethers prepared exhibit nematic mesophases, except for Va and VIa, which did not show any transition mesophases, but simply flow to liquids.

Matched MeSH terms: Microscopy, Polarization
Effect of blending and emulsification on thermal behavior, solid fat content, and microstructure properties of palm oil-based margarine fats

Saadi S, Ariffin AA, Ghazali HM, Miskandar MS, Abdulkarim SM, Boo HC

J Food Sci, 2011 Jan-Feb;76(1):C21-30.
PMID: 21535649 DOI: 10.1111/j.1750-3841.2010.01922.x

The ability of palm oil (PO) to crystallize as beta prime polymorph has made it an attractive option for the production of margarine fat (MF). Palm stearin (PS) expresses similar crystallization behavior and is considered one of the best substitutes of hydrogenated oils due to its capability to impart the required level of plasticity and body to the finished product. Normally, PS is blended with PO to reduce the melting point at body temperature (37 °C). Lipid phase, formulated by PO and PS in different ratios were subjected to an emulsification process and the following analyses were done: triacylglycerols, solid fat content (SFC), and thermal behavior. In addition, the microstructure properties, including size and number of crystals, were determined for experimental MFs (EMFs) and commercial MFs (CMFs). Results showed that blending and emulsification at PS levels over 40 wt% significantly changed the physicochemical and microstructure properties of EMF as compared to CMF, resulting in a desirable dipalmitoyl-oleoyl-glycerol content of less than 36.1%. SFC at 37 °C, crystal size, crystal number, crystallization, and melting enthalpies (ΔH) were 15%, 5.37 μm, 1425 crystal/μm(2), 17.25 J/g, and 57.69J/g, respectively. All data reported indicate that the formation of granular crystals in MFs was dominated by high-melting triacylglycerol namely dipalmitoyl-oleoyl-glycerol, while the small dose of monoacylglycerol that is used as emulsifier slowed crystallization rate. Practical Application: Most of the past studies were focused on thermal behavior of edible oils and some blends of oils and fats. The crystallization of oils and fats are well documented but there is scarce information concerning some mechanism related to crystallization and emulsification. Therefore, this study will help to gather information on the behavior of emulsifier on crystallization regime; also the dominating TAG responsible for primary granular crystal formations, as well as to determine the best level of stearin to impart the required microstructure properties and body to the finished products.

Matched MeSH terms: Microscopy, Polarization
The effect of the head group on branched-alkyl chain surfactants in glycolipid/n-octane/water ternary system

Nainggolan I, Radiman S, Hamzah AS, Hashim R

Colloids Surf B Biointerfaces, 2009 Oct 1;73(1):84-91.
PMID: 19540095 DOI: 10.1016/j.colsurfb.2009.05.021

Two novel glycolipids have been synthesized and their phase behaviour studied. They have been characterized using FT-IR, FAB and 13C NMR and 1H NMR to ensure the purity of novel glycolipids. The two glycolipids are distinguished based on the head group of glycolipids (monosaccharide/glucose and disaccharide/maltose). These two novel glycolipids have been used as surfactant to perform two phase diagrams. Phase behaviours that have been investigated are 2-hexyldecyl-beta-D-glucopyranoside (2-HDG)/n-octane/water ternary system and 2-hexyldecyl-beta-D-maltoside (2-HDM)/n-octane/water ternary system. SAXS and polarizing optical microscope have been used to study the phase behaviours of these two surfactants in ternary phase diagram. Study of effect of the head group on branched-alkyl chain surfactants in ternary system is a strategy to derive the structure-property relationship. For comparison, 2-HDM and 2-HDG have been used as surfactant in the same ternary system. The phase diagram of 2-hexyldecyl-beta-D-maltoside/n-octane/water ternary system exhibited a Lalpha phase at a higher concentration regime, followed with two phases and a micellar solution region in a lower concentration regime. The phase diagram of 2-HDG/water/n-octane ternary system shows hexagonal phase, cubic phase, rectangular ribbon phase, lamellar phase, cubic phase as the surfactant concentration increase.

Matched MeSH terms: Microscopy, Polarization
Acute calcific tendinitis of gluteus maximus tendon due to tumoral calcium pyrophosphate dihydrate deposition disease

Lim CH, Lin CT, Chen YH

Int J Rheum Dis, 2017 Dec;20(12):2249-2252.
PMID: 28036155 DOI: 10.1111/1756-185X.12969
Matched MeSH terms: Microscopy, Polarization