Browse publications by year: 2015

  1. Siti Mariam Ab Ghani, Ahmad Syahir Ahmad Zu Saifudin, Muhammad Aliff Ikram Noor Zari, Teh Adilla Mustaza
    Compendium of Oral Science, 2015;2(1):47-51.
    MyJurnal
    Dental fluorosis incidence had been reported to be affecting children widely, especially in water-fluoridated ar-ea. As these children grow into young adults, perceived aesthetic problems arise mainly due to their concern with generalized mottled and stained teeth appearance. Fixed prosthodontics treatment involving single anterior tooth in patients with generalized fluorosis condition had been found challenging due to aesthetic restorability to blend with fluorosis condition. Clinical considerations: A simplified procedural direct chair-side technique of mimicking fluorosis condition onto anterior all-ceramic crowns are discussed in this paper. The mimicked fluoro-sis is reversible and has the opportunity to be adjusted according to the patient’s fluorosis condition thus hinder-ing the need to redo the crown in the future. Conclusions: The appearance of anterior all-ceramic crowns with direct chair-side staining technique provided blended and harmonized well with the dental fluorosis condition in both patients thus, giving natural looking smile.
    MeSH terms: Ceramics; Child; Crowns; Esthetics; Fluoridation; Fluoride Poisoning; Humans; Fluorosis, Dental; Prosthodontics; Smiling; Staining and Labeling; Tooth Discoloration; Incidence; Young Adult
  2. Lee, Han Hing, Lee, Chee Yen, Shoji, Yoshinobu, Chin, Hoe Teh
    Compendium of Oral Science, 2015;2(1):40-46.
    MyJurnal
    Background: Saliva is a readily accessible biofluid that is important for the overall quality of life, func-tionally essential in the chewing, swallowing, tasting, regulation mouth flora and prevention of caries. The aim of this study is to assess the global metabolomic profile of saliva in healthy Malaysian adults. Methods: As a first step to determining and understanding the metabolomic profile of saliva in healthy Malaysian adults, we have collected saliva samples of 50 adults and measured the salivary metabolite to establish a profiling metabolite data, Human Metabolome Database (HMDB). Metabolites concentrations of saliva in healthy subjects were measured by using 1H NMR spectroscopy. Results: The results showed there was no significant inter-individual variations of the key metabolites observed among the healthy Malaysian adults and there was no significant variation of the metabolites between female and male subjects. Conclusion: The metabolomic profile of saliva in healthy Malaysian adults could be used to establish the metabolomic database and used as a comparison for future study of the saliva of specific diseases.
    MeSH terms: Adult; Deglutition; Female; Humans; Male; Mastication; Mouth; Magnetic Resonance Spectroscopy; Quality of Life; Saliva; Specimen Handling; Metabolomics; Metabolome; Microbiota; Healthy Volunteers
  3. Faezah Sabirin, Siti Sarah Abdul Ahmad, W. Zahira Akmal W. Kamarudin
    Compendium of Oral Science, 2015;2(1):32-39.
    MyJurnal
    Background: Muscular pain is the most common symptom associated to muscular skeletal disorders (MSDs). Dentists were exposed to ergonomic hazards while treating the patients. Without proper dental ergonomics, they are predisposed to the MSDs. Objective: This present study was designed to analyse the prevalence of muscular pain among practising dentists in Universiti Teknologi MARA (UiTM) and it relatedness to ergonomic factors. Methodology: A total of 25 dentists were participated in this pilot study. The inclusion criteria include working experience of at least six months and those who were readily diagnosed with musculoskeletal disorders were excluded. A self-administered questionaire was employed to gather demogaphic informations and close ended (“yes” or “no”) questions were asked to assess the muscular pain experienced in the last 12 months. The collected data were then analysed statistically. Result: The result showed a 100% response rate. 92% of the respondents were reported to experience muscular pain, particularly on the upper body parts. Only maintenance of same postures without microbreaks and performing torsions or cervical flexions to improve vision of oral cavity correlate significantly (P
    MeSH terms: Dentists; Humans; Mouth; Musculoskeletal Diseases; Pilot Projects; Posture; Surveys and Questionnaires; Prevalence; Human Body; Myalgia
  4. Nik Zarina Nik Mahmood, Noor Hayaty Abu Kasim, Mamat Azuddin, Noor Lide Abu Kassim
    Compendium of Oral Science, 2015;2(1):21-31.
    MyJurnal
    Objective: To evaluate the effect of type of viscosity and groove on surface detail reproduction of elastomeric impression materials. Methods: Two polyvinylsiloxane and polyether elastomeric impression materials were investigated. An aluminium cylindrical reference block with V- and U-shaped grooves of 1 mm and 2 mm in depth was machined using CAD-CAM system. Impressions of the block were taken to produce 35 master dies. Each die was immersed in distilled water for 5 minutes prior to impression making. Surface topography of the dies and impressions were captured using Alicona Imaging System. Mean difference in depth between the mas-ter dies and corresponding impressions’ grooves were analyzed. Results: Type of viscosities and groove showed significant main effects on surface detail (p < .01), but no significant interaction was observed between the two (p > .01). Express™ putty/light exhibited the lowest mean difference in depth for all grooves. The highest mean difference for U1 (38.3μm ± 21.55), U2 (52.96μm ± 30.39),V1 (45.02μm ± 34.82) and V2 (58.44μm ± 44.19) was obtained from Impregum medium, Aquasil medium, Impregum™ heavy/light and Impregum™ heavy/light groups respectively. Conclusion: Express putty/light-bodied material produced the best surface detail, and U-shaped groove showed superior detail reproduction.
    MeSH terms: Aluminum; Polyvinyls; Resins, Synthetic; Siloxanes; Viscosity; Computer-Aided Design
  5. Al-Jaf, Nagham, Rohaya Megat Abdul Wahab, Mohamed Ibrahim Abu Hassan
    Compendium of Oral Science, 2015;2(1):14-20.
    MyJurnal
    Objectives: To assess interradicular spaces of maxilla and mandible in subjects with class I sagittal skeletal relationship as an aid for miniscrew placement. Materials and Methods: The study was carried out using cone-beam computed tomography (CBCT) images of 47 adult subjects with class I skeletal relationship. Interradicular spaces were obtained at the alveolar processes from first premolar to second molar at 2 different vertical levels (6 and 8mm) from the cementoenamel junction (C.E.J). Results: In the maxilla, the highest inter-radicular space existed between second premolar and first molar. In the mandible, the highest interradicular space existed between first and second molar. All mandibular measurements were higher than their respective maxillary measurement. Generally, availability of interradicular space increases apically in both arches, but the difference is not significant. In the maxilla, male subjects’ measurement were significantly higher at 8 mm level between second premolar and first molar and between first and second molar Conclusions: Interradicular spac-es in the maxillary and mandibular alveolar spaces are available for miniscrew placement. In both arches, a more apical location provides more interradicular space. However, careful planning is needed to avoid sinus perforation.
    MeSH terms: Adult; Alveolar Process; Bicuspid; Humans; Male; Mandible; Maxilla; Molar; Tooth Cervix; Cone-Beam Computed Tomography; Spiral Cone-Beam Computed Tomography
  6. Budi Aslinie Md Sabri, Nur Hidayah Mohd Radzi, Fatimatuz Zahira Abdul Hadi, Ikmal HishamIsmai
    MyJurnal
    Objective: To evaluate feasibility of hand gloves as a rubber dam isolation alternative, in respect of physical properties. Materials and Methods: A randomized controlled trial study design was used. Three types of gloves were tested with two types of a rubber dam used as the control group. Cut-out pattern of dumb-bell shapes were made from 35 samples for each type of groups and tensile strength were tested using Universal Testing Machine and the Trapezium X software. All tests for physical requirements were performed in accord-ance with American Society for Testing and Materials D412, Standard Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension. Findings were analyzed by analysis of vari-ance (ANOVA) and differences were compared using a Tukey-Kramer interval calculated at the 0.05 signifi-cance level. Results: Heavy gauge rubber dam has the highest Mean (calculated at the 0.05 significance level) except for maximum stress calculated at entire area. Medium-gauge rubber dam has significantly higher tensile strength (44.5075 N/mm2) when compared to heavy-gauge rubber dam (35.7787 N/mm2) although it was 0.09mm thinner. Discovery 2020 Powder Free Latex Examination Gloves with tensile strength value of 28.5922 N/mm2 (±3.27366) is more than the minimum requirement specified by American Federal Specification ZZ-R90B Rubber Dam (Dental, 1985) (4000 pounds per square inch or 27.6 N/mm2). For all variable tested, all groups are significantly different from each other. The mean square between the groups was quite large. Conclusion: This study shows that there are significant differences between the physical strength of latex gloves when com-pared to rubber dam. However, the comparison between thickness and tensile strength among various rubber dam, did not correspond proportionately. Only one type of rubber gloves met the minimum requirement but that is just one aspect. In view of these mixed results, more research is needed before we can conclude that it is feasable that we use hand gloves to replace rubber dam.
    MeSH terms: Analysis of Variance; Feasibility Studies; Latex; Materials Testing; Research Design; Software; Tensile Strength; United States; Rubber Dams; Gloves, Protective; Elastomers; Control Groups
  7. Mohd Yusmiaidil Putera Mohd Yusof
    MyJurnal
    In legal system, the admissibility of bite mark injury has proven to give more positive impact when current tech-nologies are adapted to its analysis. The early exposure of the digitalized bite mark analysis during the under-graduate dental program is beneficial to stimulate interests and provide guidance among the professional den-tists. The step-by-step bite mark analysis partly adapted from KU Leuven, Belgium is emphasized by delivering the illustrated practical techniques using computer software Adobe Photoshop®. The overlays analysis demon-strated its practicality as easy to use and offered opportunities to learn through unconventional mode of teach-ing. The incorporation of bite mark injury analysis to the undergraduate dental learning is highly recommended
    MeSH terms: Central Nervous System Stimulants; Belgium; Bites and Stings; Bites, Human; Humans; Software
  8. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, Dragicevic M, et al.
    Eur Phys J C Part Fields, 2015 02 10;75(2):66.
    PMID: 25838791
    The purely electroweak (EW) cross section for the production of two jets in association with a Z boson, in proton-proton collisions at [Formula: see text], is measured using data recorded by the CMS experiment at the CERN LHC, corresponding to an integrated luminosity of 19.7[Formula: see text]. The electroweak cross section for the [Formula: see text] final state (with [Formula: see text] or [Formula: see text] and j representing the quarks produced in the hard interaction) in the kinematic region defined by [Formula: see text][Formula: see text], [Formula: see text][Formula: see text], transverse momentum [Formula: see text][Formula: see text], and pseudorapidity [Formula: see text], is found to be [Formula: see text], in agreement with the standard model prediction. The associated jet activity of the selected events is studied, in particular in a signal-enriched region of phase space, and the measurements are found to be in agreement with QCD predictions.
  9. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, Dragicevic M, et al.
    Eur Phys J C Part Fields, 2015 04 09;75(4):147.
    PMID: 26041973
    Measurements of the differential and double-differential Drell-Yan cross sections in the dielectron and dimuon channels are presented. They are based on proton-proton collision data at [Formula: see text] recorded with the CMS detector at the LHC and corresponding to an integrated luminosity of 19.7[Formula: see text]. The measured inclusive cross section in the [Formula: see text] peak region (60-120[Formula: see text]), obtained from the combination of the dielectron and dimuon channels, is [Formula: see text], where the statistical uncertainty is negligible. The differential cross section [Formula: see text] in the dilepton mass range 15-2000[Formula: see text] is measured and corrected to the full phase space. The double-differential cross section [Formula: see text] is also measured over the mass range 20 to 1500[Formula: see text] and absolute dilepton rapidity from 0 to 2.4. In addition, the ratios of the normalized differential cross sections measured at [Formula: see text] and 8[Formula: see text] are presented. These measurements are compared to the predictions of perturbative QCD at next-to-leading and next-to-next-to-leading (NNLO) orders using various sets of parton distribution functions (PDFs). The results agree with the NNLO theoretical predictions computed with fewz 3.1 using the CT10 NNLO and NNPDF2.1 NNLO PDFs. The measured double-differential cross section and ratio of normalized differential cross sections are sufficiently precise to constrain the proton PDFs.
  10. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, Dragicevic M, et al.
    Eur Phys J C Part Fields, 2015 05 29;75(5):237.
    PMID: 26069462
    Transverse momentum spectra of charged particles are measured by the CMS experiment at the CERN LHC in pPb collisions at [Formula: see text][Formula: see text], in the range [Formula: see text][Formula: see text] and pseudorapidity [Formula: see text] in the proton-nucleon center-of-mass frame. For [Formula: see text][Formula: see text], the charged-particle production is asymmetric about [Formula: see text], with smaller yield observed in the direction of the proton beam, qualitatively consistent with expectations from shadowing in nuclear parton distribution functions (nPDF). A pp reference spectrum at [Formula: see text][Formula: see text] is obtained by interpolation from previous measurements at higher and lower center-of-mass energies. The [Formula: see text] distribution measured in pPb collisions shows an enhancement of charged particles with [Formula: see text][Formula: see text] compared to expectations from the pp reference. The enhancement is larger than predicted by perturbative quantum chromodynamics calculations that include antishadowing modifications of nPDFs.
  11. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, Dragicevic M, et al.
    Eur Phys J C Part Fields, 2015 06 26;75(6):288.
    PMID: 26146483
    The inclusive jet cross section for proton-proton collisions at a centre-of-mass energy of 7[Formula: see text] was measured by the CMS Collaboration at the LHC with data corresponding to an integrated luminosity of 5.0[Formula: see text]. The measurement covers a phase space up to 2[Formula: see text] in jet transverse momentum and 2.5 in absolute jet rapidity. The statistical precision of these data leads to stringent constraints on the parton distribution functions of the proton. The data provide important input for the gluon density at high fractions of the proton momentum and for the strong coupling constant at large energy scales. Using predictions from perturbative quantum chromodynamics at next-to-leading order, complemented with electroweak corrections, the constraining power of these data is investigated and the strong coupling constant at the Z boson mass [Formula: see text] is determined to be [Formula: see text], which is in agreement with the world average.
  12. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, Dragicevic M, et al.
    Eur Phys J C Part Fields, 2015 07 01;75(7):302.
    PMID: 26190937
    This paper presents distributions of topological observables in inclusive three- and four-jet events produced in pp collisions at a centre-of-mass energy of 7[Formula: see text] with a data sample collected by the CMS experiment corresponding to a luminosity of 5.1[Formula: see text]. The distributions are corrected for detector effects, and compared with several event generators based on two- and multi-parton matrix elements at leading order. Among the considered calculations, MadGraph interfaced with pythia6 displays the overall best agreement with data.
  13. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, Dragicevic M, et al.
    Eur Phys J C Part Fields, 2015 10 29;75(10):511.
    PMID: 26549982
    Measurements of the [Formula: see text][Formula: see text] production cross sections in proton-proton collisions at center-of-mass energies of 7 and 8[Formula: see text] are presented. Candidate events for the leptonic decay mode [Formula: see text], where [Formula: see text] denotes an electron or a muon, are reconstructed and selected from data corresponding to an integrated luminosity of 5.1 (19.6)[Formula: see text] at 7 (8)[Formula: see text] collected with the CMS experiment. The measured cross sections, [Formula: see text] at 7[Formula: see text], and [Formula: see text] at 8[Formula: see text], are in good agreement with the standard model predictions with next-to-leading-order accuracy. The selected data are analyzed to search for anomalous triple gauge couplings involving the [Formula: see text][Formula: see text] final state. In the absence of any deviation from the standard model predictions, limits are set on the relevant parameters. These limits are then combined with the previously published CMS results for [Formula: see text][Formula: see text] in 4[Formula: see text] final states, yielding the most stringent constraints on the anomalous couplings.
  14. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, Dragicevic M, et al.
    Eur Phys J C Part Fields, 2015 11 20;75(11):542.
    PMID: 26640401
    The normalized differential cross section for top quark pair ([Formula: see text]) production is measured in pp collisions at a centre-of-mass energy of 8[Formula: see text] at the CERN LHC using the CMS detector in data corresponding to an integrated luminosity of 19.7[Formula: see text]. The measurements are performed in the lepton[Formula: see text]jets ([Formula: see text][Formula: see text]jets) and in the dilepton ([Formula: see text], [Formula: see text], and [Formula: see text]) decay channels. The [Formula: see text] cross section is measured as a function of the kinematic properties of the charged leptons, the jets associated to b quarks, the top quarks, and the [Formula: see text] system. The data are compared with several predictions from perturbative quantum chromodynamic up to approximate next-to-next-to-leading-order precision. No significant deviations are observed relative to the standard model predictions.
  15. Choon MW, Abu Talib M, Yaacob SN, Awang H, Tan JP, Hassan S, et al.
    Child Adolesc Ment Health, 2015 May;20(2):89-93.
    PMID: 32680393 DOI: 10.1111/camh.12075
    BACKGROUND: This study examined the mediating role of negative automatic thoughts in the relationship between depression and suicidal behaviour in a sample of at-risk Malaysian adolescents.

    METHOD: A total of 1441 adolescents were initially recruited via multistage cluster sampling. Subsequently, 294 at-risk adolescents were selected for further analyses through a specified cut-off score.

    RESULTS: The results showed significant positive relationships among the study variables. Specifically, negative automatic thoughts emerged as a significant mediator in the relation between depression and suicidal behaviour (z = 7.15, p 

  16. Mat-Rahim NA, Rashid TRTA, Suppiah J, Thayan R, Yusof AM, Sa'at Z
    Asian Pac J Trop Dis, 2015 Jul;5(7):543-546.
    PMID: 32289031 DOI: 10.1016/S2222-1808(15)60833-7
    Objective: To describe the complete nucleocapsid (N) gene region of Middle East respiratory syndrome coronavirus (MERS-CoV) from imported case in Malaysia and the relations with human- and camel-derived MERS-CoV.

    Methods: Combination of throat and nasal swab specimens was subjected to viral RNA extraction. For screening, the extracted RNA was subjected to real-time RT-PCR targeting upstream of E gene, open reading frame 1b and open reading frame 1a. For confirmation, the RNA was subjected to RT-PCR targeting partial part of the RNA-dependent RNA polymerase and nucleocapsid, followed by amplification of complete N gene region. Nucleotide sequencing of the first Malaysian case of MERS-CoV was performed following the confirmation with real-time RT-PCR detection.

    Results: Initial analysis of partial RNA-dependent RNA polymerase and N gene revealed that the nucleotides had high similarity to Jeddah_1_2013 strain. Analysis of complete N gene region (1 242 nucleotides) from the case showed high similarity and yet distinct to the nucleotide sequences of camel-derived MERS-CoV.

    Conclusions: From the finding, there are possibilities that the patient acquired the infection from zoonotic transmission from dromedary camels.

    MeSH terms: Animals; Base Sequence; Humans; Malaysia; Nucleotides; Pharynx; RNA, Viral; Open Reading Frames; Coronavirus Infections; Nucleocapsid; Reverse Transcriptase Polymerase Chain Reaction; Real-Time Polymerase Chain Reaction; Middle East Respiratory Syndrome Coronavirus
  17. Sule A, Abdullah FA
    AIP Conf Proc, 2015 May 15;1660(1):050007.
    PMID: 32255874 DOI: 10.1063/1.4915640
    Human immunodeficiency virus and acquired immune deficiency syndrome (HIV/AIDS) is pandemic. It has affected nearly 60 million people since the detection of the disease in 1981 to date. In this paper basic deterministic HIV/AIDS model with mass action incidence function are developed. Stability analysis is carried out. And the disease free equilibrium of the basic model was found to be locally asymptotically stable whenever the threshold parameter (RO) value is less than one, and unstable otherwise. The model is extended by introducing two optimal control strategies namely, CD4 counts and treatment for the infective using optimal control theory. Numerical simulation was carried out in order to illustrate the analytic results.
  18. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Bergauer T, Dragicevic M, et al.
    Eur Phys J C Part Fields, 2015 07 17;75(7):325.
    PMID: 26213486
    Stringent limits are set on the long-lived lepton-like sector of the phenomenological minimal supersymmetric standard model (pMSSM) and the anomaly-mediated supersymmetry breaking (AMSB) model. The limits are derived from the results presented in a recent search for long-lived charged particles in proton-proton collisions, based on data collected by the CMS detector at a centre-of-mass energy of 8 TeV at the Large Hadron Collider. In the pMSSM parameter sub-space considered, 95.9 % of the points predicting charginos with a lifetime of at least 10 ns are excluded. These constraints on the pMSSM are the first obtained at the LHC. Charginos with a lifetime greater than 100 ns and masses up to about 800 GeV in the AMSB model are also excluded. The method described can also be used to set constraints on other models.
  19. Gleadow R, Macfarlan B, Honeydew M
    F1000Res, 2015;4:898.
    PMID: 26594348 DOI: 10.12688/f1000research.7032.2
    Making material available through learning management systems is standard practice in most universities, but this is generally seen as an adjunct to the 'real' teaching, that takes place in face-to-face classes. Lecture attendance is poor, and it is becoming increasingly difficult to engage students, both in the material being taught and campus life. This paper describes the redevelopment of a large course in scientific practice and communication that is compulsory for all science students studying at our Melbourne and Malaysian campuses, or by distance education. Working with an educational designer, a blended learning methodology was developed, converting the environment provided by the learning management system into a teaching space, rather than a filing system. To ensure focus, topics are clustered into themes with a 'question of the week', a pre-class stimulus and follow up activities. The content of the course did not change, but by restructuring the delivery using educationally relevant design techniques, the content was contextualised resulting in an integrated learning experience. Students are more engaged intellectually, and lecture attendance has improved. The approach we describe here is a simple and effective approach to bringing this university's teaching and learning into the 21 (st) century.
  20. Yahya H
    Citation: Yahya H. Empowering Malaysians. Ministerial Meeting on Universal Health Coverage. Singapore, 2015

    Lecture focused on: Komuniti Sihat Perkasa Negara (KOSPEN)
    MeSH terms: Malaysia; Patient Participation
External Links