It is well known that exosomes could serve as anti-microbial immune factors in animals. However, despite growing evidences have shown that the homeostasis of the hemolymph microbiota was vital for immune regulation in crustaceans, the relationship between exosomes and hemolymph microbiota homeostasis during pathogenic bacteria infection has not been addressed. Here, we reported that exosomes released from Vibrio parahaemolyticus-infected mud crabs (Scylla paramamosain) could help to maintain the homeostasis of hemolymph microbiota and have a protective effect on the mortality of the host during the infection process. We further confirmed that miR-224 was densely packaged in these exosomes, resulting in the suppression of HSP70 and disruption of the HSP70-TRAF6 complex, then the released TRAF6 further interacted with Ecsit to regulate the production of mitochondrial ROS (mROS) and the expression of Anti-lipopolysaccharide factors (ALFs) in recipient hemocytes, which eventually affected hemolymph microbiota homeostasis in response to the pathogenic bacteria infection in mud crab. To the best of our knowledge, this is the first document that reports the role of exosome in the hemolymph microbiota homeostasis modulation during pathogen infection, which reveals the crosstalk between exosomal miRNAs and innate immune response in crustaceans.
Understanding the mechanisms through which plants generate secondary cell walls is of more than academic interest: the physical properties of plant-derived materials, including timber and textiles, all depend upon secondary wall cellulose organization. Processes controlling cellulose in the secondary cell wall and their reliance on microtubules have been documented in recent decades, but this understanding is complicated, as secondary walls normally form in the plant's interior where live cell imaging is more difficult. We investigated secondary wall formation in the orchid velamen, a multicellular epidermal layer found around orchid roots that consists of dead cells with lignified secondary cell walls. The patterns of cell wall ridges that form within the velamen vary between different orchid species, but immunolabelling demonstrated that wall deposition is controlled by microtubules. As these patterning events occur at the outer surface of the root, and as orchids are adaptable for tissue culture and genetic manipulation, we conclude that the orchid root velamen may indeed be a suitable model system for studying the organization of the plant cell wall. Notably, roots of the commonly grown orchid Laelia anceps appear ideally suited for developing this research.
A mineral fertiliser has positive effects in improving turmeric nutrients, soil enzymes and soil properties. The aim of this research was to study the effect of mineral fertilisers on the content of mineral elements in turmeric rhizome, soil enzymes activity and soil properties in the Tashkent Region, Uzbekistan. For the first time in Uzbekistan, the turmeric rhizome was cultivated to study the mineral elements present in the rhizome. A microplot experiment was conducted with four treatments including T1 (Control), T2 (N75P50K50 kg/ha), T3 (N125P100K100 kg/ha) and T4 (N100P75K75 + B3Zn6Fe6 kg/ha) and turmeric rhizome, which were collected for observation along with the soil samples. The analyses indicated that the NPK + BZnFe (100:75:75:3:6:6 kg/ha) treatment significantly improved minerals such as K, Ca, P, Mg and Na contents rhizome as compared to the control without fertiliser. Likewise, the maximum quantity of micronutrient content viz., Fe, Mn, Zn, Cu, Cr and Si was also recorded in turmeric rhizome treated with NPK + BZnFe (125:100:100:3:6:6 kg/ha). It showed an increase in these micronutrients in the rhizome compared to the control, followed by a low rate of NPK (75:50:50 kg/ha). The highest content in terms of total N, P, K content, humus, active phosphorus, potassium, and enzymes activity was also observed in soil with the treatment of mineral fertiliser viz., NPK + BznFe (100:75:75:3:6:6 kg/ha), which enhanced soil nutrient and enzyme activity. The NPK + BznFe (100:75:75:3:6:6 kg/ha) treatment significantly increased the active N content by 40%, total P content by 38% and total K content by 22% in comparison to the control without mineral fertiliser. Overall, it was found that NPK + BznFe (100:75:75:3:6:6 kg/ha) was significantly valuable for enhancing the total nitrogen, phosphorus, and potassium levels in the soil compared to control, which is useful for improving soil health in terms of soil enzyme and soil nutrients. Additionally, the micronutrients in turmeric rhizome were significantly enhanced when using this combination of fertiliser applications [NPK + BznFe (100:75:75:3:6:6 kg/ha)]. Therefore, this present study revealed that the NPK+BznFe (100:75:75:3:6:6 kg/ha) could produce the most significant yield of high-quality turmeric plants and improve soil properties in Uzbek soil-climate conditions.
The allelopathic effect of various concentrations (0, 6.25, 12.5, 50 and 100 g L-1) of Parthenium hysterophorus methanol extract on Cyperus iria was investigated under laboratory and glasshouse conditions. No seed germination was recorded in the laboratory when P. hysterophorus extract was applied at 50 g L-1. In the glasshouse, C. iria was mostly injured by P. hysterophorus extract at 100 g L-1. The phytochemical constituents of the methanol extract of P. hysterophorus were analyzed by LC-ESI-QTOF-MS=MS. The results indicated the presence of phenolic compounds, terpenoids, alkaloids, amino acids, fatty acids, piperazines, benzofuran, indole, amines, azoles, sulfonic acid and other unknown compounds in P. hysterophorus methanol extract. A comparative study was also conducted between P. hysterophorus extract (20, 40 and 80 g L-1) with a synthetic herbicide (glyphosate and glufosinate ammonium at 2 L ha-1) as a positive control and no treatment (negative control) on Ageratumconyzoides, Oryzasativa and C. iria. The growth and biomass of test weeds were remarkably inhibited by P. hysterophorus extract. Nevertheless, no significant difference was obtained when P. hysterophorus extract (80 g L-1) and synthetic herbicides (glyphosate and glufosinate ammonium) were applied on A.conyzoides.
Cancer is associated with single or multiple gene defects. Recently, much research has focused on incorporating genetic materials as one of the means to treat various types of carcinomas. RNA interference (RNAi) conveys an alternative genetic approach for cancer patients, especially when conventional medications fail. RNAi involves the inhibition of expression of specific messenger RNA that signals for uncontrollable cell growth and proliferation, most notably with carcinoma cells. This molecular technology is promising as genetic materials allow us to overcome issues associated with chemotherapeutic agents including organ damage associated with severe drug toxicities. Nonetheless, vast challenges impede successful gene therapy application, including low tumor localization, low stability and rapid clearance from the blood circulation. Owing to the limited treatment opportunities for the management of cancer, the development of effective siRNA carrier systems involving nanotherapeutics has been extensively explored. Over the past years, several siRNA nanotherapeutics have undergone a period of clinical investigation, with some demonstrating promising antitumor activities and safety profiles. Extensive observation of siRNA-nanoparticles is necessary to ensure commercial success. Therefore, this review mainly focuses on the progress of siRNAs-loaded nanoparticles that have undergone clinical trials for cancer treatment. The status of the siRNA nanotherapeutics is discussed, allowing comprehensive understanding of their gene-mediated therapeutics.
Psoriasis is a skin disease that is not lethal and does not spread through bodily contact. However, this seemingly harmless condition can lead to a loss of confidence and social stigmatization due to a persons' flawed appearance. The conventional methods of psoriasis treatment include taking in systemic drugs to inhibit immunoresponses within the body or applying topical drugs onto the surface of the skin to inhibit cell proliferation. Topical methods are favored as they pose lesser side effects compared to the systemic methods. However, the side effects from systemic drugs and low bioavailability of topical drugs are the limitations to the treatment. The use of nanotechnology in this field has enhanced drug loading capacity and reduced dosage size. In this review, biosurfactants were introduced as a 'greener' alternative to their synthetic counterparts. Glycolipid biosurfactants are specifically suited for anti-psoriatic application due to their characteristic skin-enhancing qualities. The selection of a suitable oil phase can also contribute to the anti-psoriatic effect as some oils have skin-healing properties. The review covers the pathogenic pathway of psoriasis, conventional treatments, and prospective ingredients to be used as components in the nanoemulsion formulation. Furthermore, an insight into the state-of-the-art methods used in formulating nanoemulsions and their progression to low-energy methods are also elaborated in detail.
An overview of vitamins D3 and E suggests micronutrient deficiency contributes to type 2 diabetes mellitus (T2DM). A case-control study was conducted to determine the status of plasma vitamins D3 and E isomers amongst diabetic Malaysians. Two groups were recruited for participation, one comprising fifty diabetic subjects (DM) and one comprising fifty non-diabetic (non-DM) subjects, in order to assess their plasma vitamin D3, calcium and vitamin E status. Glycaemic status (haemoglobin A1c, HbA1c; fasting blood glucose, FBG; C-Peptide) and lipid profiles (total cholesterol, TC; triglycerides, TG; low-density lipoprotein-cholesterol, LDL-C; high-density lipoprotein-cholesterol, HDL-C) were assessed, followed by anthropometric measurements. The Mann-Whitney U-test, Kruskal-Wallis and Spearman's correlation coefficient were used to elucidate the association between levels of plasma vitamins D3 and E and T2DM. The vitamin D3 deficiency group (<20 ng/mL) showed a significant correlation (p < 0.05) with glycaemic status (HbA1c and FBG) and lipid profiles (HDL-C, LDL and TC). Spearman's correlation demonstrated that vitamin D3 status is strongly correlated with HDL levels (p < 0.05). Similarly, plasma total vitamin E levels >4.9 μg/mL revealed significantly different FBG, HbA1c, C-Peptide, LDL, HDL and TC levels across both groups. Moreover, family history, smoking, waist circumference and HbA1c levels demonstrated a significant association (p < 0.05) with levels of vitamins D and E but not FBG and lipid profiles. This could be because the pre-diabetic status among the non-DM group influenced the outcomes of this study.
MeSH terms: Adult; Aged; Blood Glucose/analysis; Cholecalciferol/blood*; Diabetes Mellitus, Type 2/blood*; Diabetes Mellitus, Type 2/complications; Female; Hemoglobin A, Glycosylated/analysis; Humans; Lipids/blood; Malaysia/epidemiology; Male; Middle Aged; Nutritional Status*; Vitamin D Deficiency/blood; Vitamin D Deficiency/complications; Vitamin D Deficiency/epidemiology; Vitamin E/blood*; Case-Control Studies; Statistics, Nonparametric
This study determined the intakes of complementary foods (CFs) and milk-based formulas (MFs) by a total of 119 subjects aged 6-23.9 months from urban day care centers. Dietary intakes were assessed using two-day weighed food records. Intake adequacy of energy and nutrients was compared to the Recommended Nutrient Intakes (RNI) for Malaysia. The most commonly consumed CFs were cereals (rice, noodles, bread). The subjects derived approximately half of their energy requirements (kcals) from CFs (57 ± 35%) and MFs (56 ± 31%). Protein intake was in excess of their RNI requirements, from both CFs (145 ± 72%) and MFs (133 ± 88%). Main sources of protein included meat, dairy products, and western fast food. Intake of CFs provided less than the RNI requirements for vitamin A, thiamine, riboflavin, folate, vitamin C, calcium, iron, and zinc. Neither CF nor MF intake met the Adequate Intake (AI) requirements for essential fatty acids. These findings indicate imbalances in the dietary intake of the subjects that may have adverse health implications, including increased risk of rapid weight gain from excess protein intake, and linear growth faltering and intellectual impairment from multiple micronutrient deficiencies. Interventions are needed to improve child feeding knowledge and practices among parents and child care providers.
Effective actions for the fishery and aquaculture sectors to contribute toward improving nutrition rely on an understanding of the factors influencing fish intake, particularly amongst vulnerable populations. This scoping review synthesises evidence from 33 studies in the African Great Lakes Region to examine the influence of food environments on fish acquisition and consumption. We identified only two studies that explicitly applied a food environment framework and none that linked policy conditions with the contribution of fish to diets. Economic access to fish was represented in the largest number of included studies (21 studies), followed by preferences, acceptability and desirability of fish (17 studies) and availability and physical access (14 studies). Positive perceptions of taste and low cost, relative to other animal-source foods, were drivers of fish purchases in many settings; however, limited physical and economic access were frequently identified as preventing optimal intake. In lakeside communities, fish were increasingly directed toward external markets which reduced the availability and affordability of fish for local households. Few studies considered intra-household variations in fish access according to age, gender or physiological status, which represents an important knowledge gap. There is also scope for future research on seasonal influences on fish access and the design and rigorous evaluation of programmes and policies that address one or more constraints of availability, cost, convenience and preferences.
MeSH terms: Animals; Feeding Behavior*; Fishes*; Humans; Nutritive Value; Socioeconomic Factors; Africa South of the Sahara; Food Chain; Lakes; Recommended Dietary Allowances
Recently, because of the rising population, carbon overloading, and environmental distress, human beings have needed to increase awareness and responsibility for the reduction of agricultural waste. The utilization of agricultural waste as a filler material in reinforced polymers is a fascinating discovery. This review paper attempts to study the physical, mechanical, and thermal behavior of rice husk (RH) as a fiber for reinforcing various synthetic polymers, based on recent studies, conducted between 2017 and 2021. It also highlights that advanced modification techniques could further improve the performance of composites by tailoring the physical and chemical substances of the fiber or matrix. The thermal properties, including flame-retardance and thermal behavior, are also discussed. The characteristics of the fiber-matrix interaction between RH and the polymer matrix provide essential insights into the future-ready applications of this agricultural waste fiber. The way forward in researching RH polymer composites is finally reviewed.
To reduce the emission of harmful materials into the ecosystem, researchers have been exploring the potential of manufacturing polymeric composites based on natural fibres. Although the large area of application of these materials has encouraged investigations of their performance under various loading conditions, less research has been conducted on their tribological behaviour. Hence, in this study, tribological tests were conducted on epoxy composites based on bamboo fibres. The wear performance of bamboo fibre reinforced epoxy was tested using various operating parameters, and the worn surfaces were examined using optical microscopy. The results revealed that the specific wear rate of the composites reduced since the epoxy was reinforced with bamboo fibres. Scanning electron microscopy analysis showed different wear mechanisms and damages.
Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] is a bacterial derived biopolymer widely known for its unique physical and mechanical properties to be used in biomedical application. In this study, antimicrobial agent silver sulfadiazine (SSD) coat/collagen peptide coat-P(3HB-co-4HB) (SCCC) and SSD blend/collagen peptide coat-P(3HB-co-4HB) scaffolds (SBCC) were fabricated using a green salt leaching technique combined with freeze-drying. This was then followed by the incorporation of collagen peptides at various concentrations (2.5-12.5 wt.%) to P(3HB-co-4HB) using collagen-coating. As a result, two types of P(3HB-co-4HB) scaffolds were fabricated, including SCCC and SBCC scaffolds. The increasing concentrations of collagen peptides from 2.5 wt.% to 12.5 wt.% exhibited a decline in their porosity. The wettability and hydrophilicity increased as the concentration of collagen peptides in the scaffolds increased. In terms of the cytotoxic results, MTS assay demonstrated the L929 fibroblast scaffolds adhered well to the fabricated scaffolds. The 10 wt.% collagen peptides coated SCCC and SBCC scaffolds displayed highest cell proliferation rate. The antimicrobial analysis of the fabricated scaffolds exhibited 100% inhibition towards various pathogenic microorganisms. However, the SCCC scaffold exhibited 100% inhibition between 12 and 24 h, but the SBCC scaffolds with SSD impregnated in the scaffold had controlled release of the antimicrobial agent. Thus, this study will elucidate the surface interface-cell interactions of the SSD-P(3HB-co-4HB)-collagen peptide scaffolds and controlled release of SSD, antimicrobial agent.
The aim of this study is to prepare a dual layer polyvinyl (PVA) patch using a combination of electrospinning techniques and cryogelation (freeze-thaw process) then subsequently to investigate the effect of freeze-thaw cycles, nanofiber thickness, and diclofenac sodium (DS) loading on the physicochemical and mechanical properties and formulation of dual layer PVA patches composed of electrospun PVA nanofibers and PVA cryogel. After the successful preparation of the dual layer PVA patch, the prepared patch was subjected to investigation to assess the effect of freeze-thaw cycles, nanofiber thickness and percentages of DS loading on the morphology, physiochemical and mechanical properties. Various spectroscopic techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), water contact angle, and tensile tests were used to evaluate the physicochemical and mechanical properties of prepared dual layer PVA patches. The morphological structures of the dual layer PVA patch demonstrated the effectiveness of both techniques. The effect of freeze-thaw cycles, nanofiber thickness, and DS percentage loading on the crystallinity of a dual layer PVA patch was investigated using XRD analysis. The presence of a distinct DS peak in the FTIR spectrum indicates the compatibility of DS in a dual layer PVA patch through in-situ loading. All prepared patches were considered highly hydrophilic because the data obtained was less than 90°. The increasing saturation of DS within the PVA matrix increases the tensile strength of prepared patches, however decreased its elasticity. Evidently, the increasing of electrospun PVA nanofibers thickness, freeze-thaw cycles, and the DS saturation has improved the physicochemical and mechanical properties of the DS medicated dual layer PVA patches, making them a promising biomaterial for transdermal drug delivery applications.
The effect of the soft and hard polyurethane (PU) segments caused by the hydrogen link in phase-separation kinetics was studied to investigate the morphological annealing of PU and thermoplastic polyurethane (TPU). The significance of the segmented PUs is to achieve enough stability for further applications in biomedical and environmental fields. In addition, other research focuses on widening the plastic features and adjusting the PU-polyimide ratio to create elastomer of the poly(urethane-imide). Regarding TPU- and PU-nanocomposite, numerous studies investigated the incorporation of inorganic nanofillers such as carbon or clay to incorporating TPU-nanocomposite in several applications. Additionally, the complete exfoliation was observed up to 5% and 3% of TPU-clay modified with 12 amino lauric acid and benzidine, respectively. PU-nanocomposite of 5 wt.% Cloisite®30B showed an increase in modulus and tensile strength by 110% and 160%, respectively. However, the nanocomposite PU-0.5 wt.% Carbone Nanotubes (CNTs) show an increase in the tensile modulus by 30% to 90% for blown and flat films, respectively. Coating PU influences stress-strain behavior because of the interaction between the soft segment and physical crosslinkers. The thermophysical properties of the TPU matrix have shown two glass transition temperatures (Tg's) corresponding to the soft and the hard segment. Adding a small amount of tethered clay shifts Tg for both segments by 44 °C and 13 °C, respectively, while adding clay from 1 to 5 wt.% results in increasing the thermal stability of TPU composite from 12 to 34 °C, respectively. The differential scanning calorimetry (DSC) was used to investigate the phase structure of PU dispersion, showing an increase in thermal stability, solubility, and flexibility. Regarding the electrical properties, the maximum piezoresistivity (10 S/m) of 7.4 wt.% MWCNT was enhanced by 92.92%. The chemical structure of the PU-CNT composite has shown a degree of agglomeration under disruption of the sp2 carbon structure. However, with extended graphene loading to 5.7 wt.%, piezoresistivity could hit 10-1 S/m, less than 100 times that of PU. In addition to electrical properties, the acoustic behavior of MWCNT (0.35 wt.%)/SiO2 (0.2 wt.%)/PU has shown sound absorption of 80 dB compared to the PU foam sample. Other nanofillers, such as SiO2, TiO2, ZnO, Al2O3, were studied showing an improvement in the thermal stability of the polymer and enhancing scratch and abrasion resistance.
Jatropha oil-based polyol (JOL) was prepared from crude Jatropha oil via an epoxidation and hydroxylation reaction. During the isocyanation step, two different types of diisocyanates; 2,4-toluene diisocyanate (2,4-TDI) and isophorone diisocyanate (IPDI), were introduced to produce Jatropha oil-based polyurethane acrylates (JPUA). The products were named JPUA-TDI and JPUA-IPDI, respectively. The success of the stepwise reactions of the resins was confirmed using 1H nuclear magnetic resonance (NMR) spectroscopy to support the Fourier-transform infrared (FTIR) spectroscopy analysis that was reported in the previous study. For JPUA-TDI, the presence of a signal at 7.94 ppm evidenced the possible side reactions between urethane linkages with secondary amine that resulted in an aryl-urea group (Ar-NH-COO-). Meanwhile, the peak of 2.89 ppm was assigned to the α-position of methylene to the carbamate (-CH2NHCOO) group in the JPUA-IPDI. From the rheological study, JO and JPUA-IPDI in pure form were classified as Newtonian fluids, while JPUA-TDI showed non-Newtonian behaviour with pseudoplastic or shear thinning behaviour at room temperature. At elevated temperatures, the JO, JPUA-IPDI mixture and JPUA-TDI mixture exhibited reductions in viscosity and shear stress as the shear rate increased. The JO and JPUA-IPDI mixture maintained Newtonian fluid behaviour at all temperature ranges. Meanwhile, the JPUA-TDI mixture showed shear thickening at 25 °C and shear thinning at 40 °C, 60 °C and 80 °C. The master curve graph based on the shear rate for the JO, JPUA-TDI mixture and JPUA-IPDI mixture at 25 °C, 40 °C, 60 °C and 80 °C was developed as a fluid behaviour reference for future storage and processing conditions during the encapsulation process. The encapsulation process can be conducted to fabricate a self-healing coating based on a microcapsule triggered either by air or ultra-violet (UV) radiation.
The thermal kinetic modeling is crucial for development of sustainable processes where lignocellulosic fuels are a part of chemical system and their thermal degradation eventuates. In this paper, thermal decomposition of three lignocellulosic materials (bagasse, rice husk, and wheat straw) was obtained by the thermogravimetric (TG) technique and kinetics was analyzed by both model-fitting and isoconversional (model-free) methods to compare their effectiveness. Two models selected from each class include Arrhenius and Coats-Redfern (model-fitting), and Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWO) (model-free). The formal model-fitting approach simulating the thermal decomposition of solids by assuming a fixed mechanism was found to be unduly facile. However, activation energy (E) values calculated from two model-fitting techniques were considerably different from each other with a percentage difference in the range of 1.36% to 7.65%. Particularly, both model-fitting methods predicted different reaction mechanism for thermal disintegration of lignocellulosic materials (two-dimensional diffusion (D2) by Arrhenius and one-dimensional diffusion (D1) by Coat-Redfern method). Conversely, the model-free routine offers a transformation of mechanism and activation energy values throughout reaction and is, therefore, more authentic to illustrate the complexity of thermal disintegration of lignocellulosic particles. Based on the model-free kinetic analysis, the lignocellulosic materials may be devised in following order of activation energy: rice husk > bagasse > wheat straw, by both KAS and FWO methods with a percentage difference no more than 0.84% for fractional conversion up to 0.7. Isoconversional approach could be recommended as more realistic and precise for modeling non-isothermal kinetics of lignocellulosic residues compared to model-fitting approach.
Tissue engineering and regenerative medicine are generally concerned with reconstructing cells, tissues, or organs to restore typical biological characteristics. Liposomes are round vesicles with a hydrophilic center and bilayers of amphiphiles which are the most influential family of nanomedicine. Liposomes have extensive research, engineering, and medicine uses, particularly in a drug delivery system, genes, and vaccines for treatments. Exosomes are extracellular vesicles (EVs) that carry various biomolecular cargos such as miRNA, mRNA, DNA, and proteins. As exosomal cargo changes with adjustments in parent cells and position, research of exosomal cargo constituents provides a rare chance for sicknesses prognosis and care. Exosomes have a more substantial degree of bioactivity and immunogenicity than liposomes as they are distinctly chiefly formed by cells, which improves their steadiness in the bloodstream, and enhances their absorption potential and medicinal effectiveness in vitro and in vivo. In this review, the crucial challenges of exosome and liposome science and their functions in disease improvement and therapeutic applications in tissue engineering and regenerative medicine strategies are prominently highlighted.
The biggest challenge in the present-day healthcare scenario is the rapid emergence and spread of antimicrobial resistance due to the rampant use of antibiotics in daily therapeutics. Such drug resistance is associated with the enhancement of microbial virulence and the acquisition of the ability to evade the host's immune response under the shelter of a biofilm. Quorum sensing (QS) is the mechanism by which the microbial colonies in a biofilm modulate and intercept communication without direct interaction. Hence, the eradication of biofilms through hindering this communication will lead to the successful management of drug resistance and may be a novel target for antimicrobial chemotherapy. Chitosan shows microbicidal activities by acting electrostatically with its positively charged amino groups, which interact with anionic moieties on microbial species, causing enhanced membrane permeability and eventual cell death. Therefore, nanoparticles (NPs) prepared with chitosan possess a positive surface charge and mucoadhesive properties that can adhere to microbial mucus membranes and release their drug load in a constant release manner. As the success in therapeutics depends on the targeted delivery of drugs, chitosan nanomaterial, which displays low toxicity, can be safely used for eradicating a biofilm through attenuating the quorum sensing (QS). Since the anti-biofilm potential of chitosan and its nano-derivatives are reported for various microorganisms, these can be used as attractive tools for combating chronic infections and for the preparation of functionalized nanomaterials for different medical devices, such as orthodontic appliances. This mini-review focuses on the mechanism of the downregulation of quorum sensing using functionalized chitosan nanomaterials and the future prospects of its applications.
In this research, the effect of processing input parameters on the kerf taper angle response of three various material thicknesses of sugar palm fiber reinforced unsaturated polyester composite was investigated as an output parameter from abrasive waterjet and laser beam cutting techniques. The main purpose of the study is to obtain data that includes the optimum input parameters in cutting the composite utilizing these two unconventional techniques to avoid some defects that arise when using traditional cutting methods for cutting the composites, and then make a comparison to determine which is the most appropriate technique regarding the kerf taper angle response that is desired to be reduced. In the laser beam cutting process, traverse speed, laser power, and assist gas pressure were selected as the variable input parameters to optimize the kerf taper angle. While the water pressure, traverse speed, and stand-off-distance were the input variable parameters in the case of waterjet cutting process, with fixing of all the other input parameters in both cutting techniques. The levels of the input parameters that provide the optimal response of the kerf taper angle were determined using Taguchi's approach, and the significance of input parameters was determined by computing the max-min variance of the average of the signal to-noise ratio (S/N) for each parameter. The contribution of each input processing parameter to the effects on kerf taper angle was determined using analysis of variation (ANOVA). Compared with the results that were extrapolated in the previous studies, both processes achieved acceptable results in terms of the response of the kerf taper angle, noting that the average values produced from the laser cutting process are much lower than those resulting from the waterjet cutting process, which gives an advantage to the laser cutting technique.