Affiliations 

  • 1 Department of Biological Functions and Engineering, Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, Fukuoka, Japan Faculty of Chemical Engineering, Universiti Teknologi MARA (UiTM), Sarawak, Malaysia Faculty of Chemical Engineering, Universiti Teknologi MARA (UiTM), Malaysia, Shah Alam, Malaysia
  • 2 Department of Biological Functions and Engineering, Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, Fukuoka, Japan
  • 3 Department of Bioprocess Technology, Faculty of Biotechnology and Bimolecular Sciences, Universiti Putra Malaysia (UPM), Selangor, Malaysia
  • 4 Department of Process and Food Engineering, Faculty of Engineering, Universiti Putra Malaysia, Selangor, Malaysia
  • 5 Yamamoto Funtan Kogyo Lit. Co. Japan
  • 6 Kamihebaru 476, Tatibana, Yame, Fukuoka, Japan
  • 7 Department of Bioprocess Technology, Faculty of Biotechnology and Bimolecular Sciences, Universiti Putra Malaysia (UPM), Selangor, Malaysia Department of Process and Food Engineering, Faculty of Engineering, Universiti Putra Malaysia, Selangor, Malaysia alihas@upm.edu.my
Waste Manag Res, 2016 Feb;34(2):176-80.
PMID: 26612557 DOI: 10.1177/0734242X15616472

Abstract

An appropriate technology for waste utilisation, especially for a large amount of abundant pressed-shredded oil palm empty fruit bunch (OFEFB), is important for the oil palm industry. Self-sustained pyrolysis, whereby oil palm biomass was combusted by itself to provide the heat for pyrolysis without an electrical heater, is more preferable owing to its simplicity, ease of operation and low energy requirement. In this study, biochar production under self-sustained pyrolysis of oil palm biomass in the form of oil palm empty fruit bunch was tested in a 3-t large-scale pool-type reactor. During the pyrolysis process, the biomass was loaded layer by layer when the smoke appeared on the top, to minimise the entrance of oxygen. This method had significantly increased the yield of biochar. In our previous report, we have tested on a 30-kg pilot-scale capacity under self-sustained pyrolysis and found that the higher heating value (HHV) obtained was 22.6-24.7 MJ kg(-1) with a 23.5%-25.0% yield. In this scaled-up study, a 3-t large-scale procedure produced HHV of 22.0-24.3 MJ kg(-1) with a 30%-34% yield based on a wet-weight basis. The maximum self-sustained pyrolysis temperature for the large-scale procedure can reach between 600 °C and 700 °C. We concluded that large-scale biochar production under self-sustained pyrolysis was successfully conducted owing to the comparable biochar produced, compared with medium-scale and other studies with an electrical heating element, making it an appropriate technology for waste utilisation, particularly for the oil palm industry.

* Title and MeSH Headings from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.