Affiliations 

  • 1 Energy Division, School of Mechanical and Building Sciences, VIT University, Vellore, 632014, Tamil Nadu, India. sekhar.rajay@gmail.com
  • 2 Department of Mechanical Engineering, Universiti Teknologi Petronas, Bandar Seri Iskandar, 32610, Tronoh, Perak, Malaysia
  • 3 Department of Petroleum Engineering, Universiti Teknologi Petronas, Bandar Seri Iskandar, 32610, Tronoh, Perak, Malaysia
Environ Sci Pollut Res Int, 2016 May;23(10):9411-7.
PMID: 26593731 DOI: 10.1007/s11356-015-5715-9

Abstract

The solar flat plate collector operating under different convective modes has low efficiency for energy conversion. The energy absorbed by the working fluid in the collector system and its heat transfer characteristics vary with solar insolation and mass flow rate. The performance of the system is improved by reducing the losses from the collector. Various passive methods have been devised to aid energy absorption by the working fluid. Also, working fluids are modified using nanoparticles to improve the thermal properties of the fluid. In the present work, simulation and experimental studies are undertaken for pipe flow at constant heat flux boundary condition in the mixed convection mode. The working fluid at low Reynolds number in the mixed laminar flow range is undertaken with water in thermosyphon mode for different inclination angles of the tube. Local and average coefficients are determined experimentally and compared with theoretical values for water-based Al2O3 nanofluids. The results show an enhancement in heat transfer in the experimental range with Rayleigh number at higher inclinations of the collector tube for water and nanofluids.

* Title and MeSH Headings from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.