Displaying all 7 publications

Abstract:
Sort:
  1. Huda N, Raman AAA, Bello MM, Ramesh S
    J Environ Manage, 2017 Dec 15;204(Pt 1):75-81.
    PMID: 28865309 DOI: 10.1016/j.jenvman.2017.08.028
    The main problem of landfill leachate is its diverse composition comprising many persistent organic pollutants which must be removed before being discharge into the environment. This study investigated the treatment of raw landfill leachate using electrocoagulation process. An electrocoagulation system was designed with iron as both the anode and cathode. The effects of inter-electrode distance, initial pH and electrolyte concentration on colour and COD removals were investigated. All these factors were found to have significant effects on the colour removal. On the other hand, electrolyte concentration was the most significant parameter affecting the COD removal. Numerical optimization was also conducted to obtain the optimum process performance. Under optimum conditions (initial pH: 7.73, inter-electrode distance: 1.16 cm, and electrolyte concentration (NaCl): 2.00 g/L), the process could remove up to 82.7% colour and 45.1% COD. The process can be applied as a pre-treatment for raw leachates before applying other appropriate treatment technologies.
  2. Sherlala AIA, Raman AAA, Bello MM, Buthiyappan A
    J Environ Manage, 2019 Sep 15;246:547-556.
    PMID: 31202019 DOI: 10.1016/j.jenvman.2019.05.117
    Chitosan-magnetic-graphene oxide (CMGO) nanocomposite was prepared for arsenic adsorption. The nanocomposite was characterized through BET, FTIR, FESEM, EDX, and VSM analyses. These characterizations confirmed the formation of CMGO nanocomposites with high specific surface area (152.38 m2/g) and excellent saturation magnetization (49.30 emu/g). Batch adsorption experiments were conducted to evaluate the performance of the nanocomposite in the adsorption of arsenic from aqueous solution. The effects of operational parameters, adsorption kinetic, equilibrium isotherm and thermodynamics were evaluated. The removal efficiency of arsenic increased with increasing adsorbent dosage and contact time. However, the effect of pH followed a different pattern, with the removal efficiency increasing from acidic to neutral pH, and then decreasing at alkaline conditions. The highest adsorption capacity (45 mg/g) and removal efficiency (61%) were obtained at pH 7.3. The adsorption kinetic followed a pseudo-second-order kinetic model. The analysis of adsorption isotherm shows that the adsorption data fitted well to Langmuir isotherm model, indicating a homogeneous process. Thermodynamic analysis shows that the adsorption of As(III) is exothermic and spontaneous. The superparamagnetic properties of the nanocomposite enabled the separation and recovery of the nanoparticles using an external magnetic field. Thus, the developed nanocomposite has a potential for arsenic remediation.
  3. Sherlala AIA, Raman AAA, Bello MM, Asghar A
    Chemosphere, 2018 Feb;193:1004-1017.
    PMID: 29874727 DOI: 10.1016/j.chemosphere.2017.11.093
    Graphene-based adsorbents have attracted wide interests as effective adsorbents for heavy metals removal from the environment. Due to their excellent electrical, mechanical, optical and transport properties, graphene and its derivatives such as graphene oxide (GO) have found various applications. However, in many applications, surface modification is necessary as pristine graphene/GO may be ineffective in some specific applications such as adsorption of heavy metal ions. Consequently, the modification of graphene/GO using various metals and non-metals is an ongoing research effort in the carbon-material realm. The use of organic materials represents an economical and environmentally friendly approach in modifying GO for environmental applications such as heavy metal adsorption. This review discusses the applications of organo-functionalized GO composites for the adsorption of heavy metals. The aspects reviewed include the commonly used organic materials for modifying GO, the performance of the modified composites in heavy metals adsorption, effects of operational parameters, adsorption mechanisms and kinetic, as well as the stability of the adsorbents. Despite the significant research efforts on GO modification, many aspects such as the interaction between the functional groups and the heavy metal ions, and the quantitative effect of the functional groups are yet to be fully understood. The review, therefore, offers some perspectives on the future research needs.
  4. Sherlala AIA, Raman AAA, Bello MM
    Environ Technol, 2019 May;40(12):1508-1516.
    PMID: 29300679 DOI: 10.1080/09593330.2018.1424259
    A magnetic graphene oxide (MGO) was developed for the adsorption of As(III) from aqueous solution. The characteristics of MGO were investigated using Fourier-transform infrared (FTIR), X-ray diffraction and field emission scanning electron microscope-E/energy-dispersive X-ray analyses. Batch adsorption experiments were designed using central composite design, and the effects of adsorbent dosage, pH, contact time and concentration of As(III) were investigated. The MGO showed an excellent performance, removing up to 99.95% of As(III) under the following condition: initial As(III) concentration = 100 mg/L, pH = 7, adsorbent dosage = 0.3 g/L and contact time = 77 min. MGO dosage and initial pH were the most significant parameters influencing the process performance. FTIR analysis of the used adsorbent confirms the adsorption of As(III) through complexation between surface functional groups of the MGO and the oxyanions of As(III). The adsorbent maintained a significant level of performance even after four cycles of adsorption. Thus, the developed MGO has the potential to be used for the abatement of arsenic pollution.
  5. Bello MM, Nourouzi MM, Abdullah LC, Choong TS, Koay YS, Keshani S
    J Hazard Mater, 2013 Nov 15;262:106-13.
    PMID: 24021163 DOI: 10.1016/j.jhazmat.2013.06.053
    As Malaysia is one of the world's largest producer of palm oil, large amounts of palm oil mill effluent (POME) is generated. It was found that negatively charged components are accountable for POME color. An attempt was made to remove residual contaminants after conventional treatment using anion base resin. Adsorption experiments were carried out in fixed bed column. Various models such as the Thomas, the Yoon-Nelson, the Wolborska and BDST model were used to fit the experimental data. It was found that only the BDST model was fitted well at the initial breakthrough time. A wavelet neural network model (WNN) was developed to model the breakthrough curves in fixed bed column for multicomponent system. The results showed that the WNN model described breakthrough curves better than the commonly used models. The effects of pH, flow rate and bed depth on column performance were investigated. It was found that the highest uptake capacity was obtained at pH 3. The exhaustion time appeared to increase with increase in bed length and decrease in flow rate.
  6. Isiaku AI, Sabri MY, Ina-Salwany MY, Hassan MD, Tanko PN, Bello MB
    Microb Pathog, 2017 Jan;102:59-68.
    PMID: 27890651 DOI: 10.1016/j.micpath.2016.10.029
    Biofilms are aggregates of attached microbial organisms whose existence on tissues is often recognised as a mechanism for the establishment of most chronic diseases. Herein we investigated the ability of piscine Streptococcus agalactiae, an important aquatic pathogen, for adaptation to this sessile lifestyle in vitro and in the brain of a tilapia fish model. Piscine S. agalactiae exhibited a weak attachment to polystyrene plates and expressed a low biofilm phenotype under the study conditions. Furthermore, fluorescent in situ hybridization and confocal laser scanning microscopy revealed discrete aggregates of attached S. agalactiae within brain tissues and around meningeal surfaces. They were embedded in an exopolysaccharide containing matrix, intractable to inflammatory response and showed some level of resistance to penicillin despite proven susceptibility on sensitivity test. Intracellular bacterial aggregates were also observed, moreover, antibody mediated response was not demonstrated during infection. Nucleated erythrocytes appear to facilitate brain invasion possibly via the Trojan horse mechanism leading to a granulomatous inflammation. We have demonstrated that biofilm is associated with persistence of S. agalactiae and the development of chronic meningoencephalitis in fish.
  7. Cheng AL, Li J, Vaid AK, Ma BB, Teh C, Ahn JB, et al.
    Clin Colorectal Cancer, 2014 Sep;13(3):145-55.
    PMID: 25209093 DOI: 10.1016/j.clcc.2014.06.004
    Colorectal cancer (CRC) is among the most common cancers worldwide, but marked epidemiological differences exist between Asian and non-Asian populations. Hence, a consensus meeting was held in Hong Kong in December 2012 to develop Asia-specific guidelines for the management of metastatic CRC (mCRC). A multidisciplinary expert panel, consisting of 23 participants from 10 Asian and 2 European countries, discussed current guidelines for colon or rectal cancer and developed recommendations for adapting these guidelines to Asian clinical practice. Participants agreed that mCRC management in Asia largely follows international guidelines, but they proposed a number of recommendations based on regional 'real-world' experience. In general, participants agreed that 5-fluorouracil (5-FU) infusion regimens in doublets can be substituted with UFT (capecitabine, tegafur-uracil) and S1 (tegafur, 5-chloro-2,4-dihydroxypyridine and oxonic acid), and that the monoclonal antibodies cetuximab and panitumumab are recommended for KRAS wild type tumors. For KRAS mutant tumors, bevacizumab is the preferred biological therapy. FOLFOX (folinic acid, 5-FU, and oxaliplatin) is preferred for initial therapy in Asian patients. The management of mCRC is evolving, and it must be emphasized that the recommendations presented here reflect current treatment practices and thus might change as more data become available.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links