MyMedR

Displaying all 6 publications

Abstract:

Sort:

Fulltext Effect of peat on physicomechanical properties of cemented brick

Islam SM, Hashim R, Islam AB, Kurnia R

ScientificWorldJournal, 2014;2014:328516.
PMID: 24982941 DOI: 10.1155/2014/328516

The popularity of low cost, lightweight, and environmentally affable masonry unit in building industry carries the need to investigate more flexible and adaptable brick component as well as to retain the requirements confirmed in building standards. In this study, potential use of local materials used as lightweight building materials in solving the economic problems of housing has been investigated. Experimental studies on peat added bricks have been carried out. It demonstrates the physicomechanical properties of bricks and investigates the influence of peat, sand, and cement solid bricks to the role of various types of constructional applications. The achieved compressive strength, spitting strength, flexural strength, unit weight, and ultrasonic pulse velocity are significantly reduced and the water absorption is increased with percentage wise replacement of peat as aggregate in the samples. The maximum 20% of (% mass) peat content meets the requirements of relevant well-known international standards. The experimental values illustrate that, the 44% volumetric replacement with peat did not exhibit any sudden brittle fracture even beyond the ultimate loads and a comparatively smooth surface is found. The application of peat as efficient brick substance shows a potential to be used for wall and a viable solution in the economic buildings design.
Effects of Melatonin on Colchicine-Treated PLBs of Dendrobium sonia-28 Orchid

Lim MS, Antony JJ, Islam SM, Suhana Z, Sreeramanan S

Appl Biochem Biotechnol, 2017 Jan;181(1):15-31.
PMID: 27461541 DOI: 10.1007/s12010-016-2196-3

Dendrobium hybrid orchid is popular in orchid commercial industry due to its short life cycle and ability to produce various types of flower colours. This study was conducted to identify the morphological, biochemical and scanning electron microscopy (SEM) analysis in the Dendrobium sonia-28 orchid plants. In this study, 0.05 and 0.075 % of colchicine-treated Dendrobium sonia-28 (4-week-old culture) protocorm-like bodies (PLBs) were treated in different concentrations of melatonin (MEL) posttreatments (0, 0.05, 0.1, 0.5, 1, 5 and 10 μM). Morphological parameters such as number of shoots, growth index and number of PLBs were determined. In the 0.05 and 0.075 % of colchicine-treated PLBs which were posttreated with 0.05 μM MEL resulted in the highest value of the morphological parameters tested based on the number of shoots (84.5 and 96.67), growth index (16.94 and 12.15) and number of PLBs (126.5 and 162.33), respectively. SEM analysis of the 0.05 μM MEL posttreatment on both the colchicine-treated regenerated PLBs showed irregular cell lineages, and some damages occurred on the stomata. This condition might be due to the effect of plasmolyzing occurred in the cell causing irregular cell lineages.
Fulltext Benign Subcutaneous Emphysema of the Upper Limb: A Case Report

Rabiul Islam SM, Mamman KG, Pande KC

Malays Orthop J, 2016 Nov;10(3):39-41.
PMID: 28553447 DOI: 10.5704/MOJ.1611.002

Subcutaneous emphysema is the presence of gas or air in the subcutaneous tissue plane. The term is generally used to describe any soft tissue emphysema of the body wall or limbs, it can result from benign causes, most commonly secondary to trauma or from a life-threatening infection by gas gangrene or necrotising fasciitis. A case of subcutaneous emphysema involving the upper limb resulting from a trivial laceration to the elbow is reported and the importance of distinguishing between the two causes of subcutaneous emphysema is highlighted.
Fulltext A Vision-Based Machine Learning Method for Barrier Access Control Using Vehicle License Plate Authentication

Islam KT, Raj RG, Shamsul Islam SM, Wijewickrema S, Hossain MS, Razmovski T, et al.

Sensors (Basel), 2020 Jun 24;20(12).
PMID: 32599883 DOI: 10.3390/s20123578

Automatic vehicle license plate recognition is an essential part of intelligent vehicle access control and monitoring systems. With the increasing number of vehicles, it is important that an effective real-time system for automated license plate recognition is developed. Computer vision techniques are typically used for this task. However, it remains a challenging problem, as both high accuracy and low processing time are required in such a system. Here, we propose a method for license plate recognition that seeks to find a balance between these two requirements. The proposed method consists of two stages: detection and recognition. In the detection stage, the image is processed so that a region of interest is identified. In the recognition stage, features are extracted from the region of interest using the histogram of oriented gradients method. These features are then used to train an artificial neural network to identify characters in the license plate. Experimental results show that the proposed method achieves a high level of accuracy as well as low processing time when compared to existing methods, indicating that it is suitable for real-time applications.
Fulltext Estimating global injuries morbidity and mortality: methods and data used in the Global Burden of Disease 2017 study

James SL, Castle CD, Dingels ZV, Fox JT, Hamilton EB, Liu Z, et al.

Inj Prev, 2020 Oct;26(Supp 1):i125-i153.
PMID: 32839249 DOI: 10.1136/injuryprev-2019-043531

BACKGROUND: While there is a long history of measuring death and disability from injuries, modern research methods must account for the wide spectrum of disability that can occur in an injury, and must provide estimates with sufficient demographic, geographical and temporal detail to be useful for policy makers. The Global Burden of Disease (GBD) 2017 study used methods to provide highly detailed estimates of global injury burden that meet these criteria.
METHODS: In this study, we report and discuss the methods used in GBD 2017 for injury morbidity and mortality burden estimation. In summary, these methods included estimating cause-specific mortality for every cause of injury, and then estimating incidence for every cause of injury. Non-fatal disability for each cause is then calculated based on the probabilities of suffering from different types of bodily injury experienced.
RESULTS: GBD 2017 produced morbidity and mortality estimates for 38 causes of injury. Estimates were produced in terms of incidence, prevalence, years lived with disability, cause-specific mortality, years of life lost and disability-adjusted life-years for a 28-year period for 22 age groups, 195 countries and both sexes.
CONCLUSIONS: GBD 2017 demonstrated a complex and sophisticated series of analytical steps using the largest known database of morbidity and mortality data on injuries. GBD 2017 results should be used to help inform injury prevention policy making and resource allocation. We also identify important avenues for improving injury burden estimation in the future.
Fulltext Global injury morbidity and mortality from 1990 to 2017: results from the Global Burden of Disease Study 2017

James SL, Castle CD, Dingels ZV, Fox JT, Hamilton EB, Liu Z, et al.

Inj Prev, 2020 10;26(Supp 1):i96-i114.
PMID: 32332142 DOI: 10.1136/injuryprev-2019-043494

BACKGROUND: Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries.
METHODS: We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs).
FINDINGS: In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505).
INTERPRETATION: Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.