MyMedR

Displaying all 4 publications

Abstract:

Sort:

Bio-electrochemical power generation in petrochemical wastewater fed microbial fuel cell

Sarmin S, Ethiraj B, Islam MA, Ideris A, Yee CS, Khan MMR

Sci Total Environ, 2019 Dec 10;695:133820.
PMID: 31416036 DOI: 10.1016/j.scitotenv.2019.133820

The petrochemical wastewater (PCW) from acrylic acid plants possesses a very high chemical oxygen demand (COD) due to the presence of acrylic acid along with other organic acids. The treatment of PCW by conventional aerobic and anaerobic methods is energy intensive. Therefore, the treatment of PCW with concurrent power generation by employing microbial fuel cell (MFC) could be a potential alternative to solve the energy and environmental issues. This study demonstrates the potentiality of PCW from acrylic acid plant with an initial COD of 45,000 mg L-1 generating maximum power density of 850 mW m-2 at a current density of 1500 mA m-2 using acclimatized anaerobic sludge (AS) as biocatalyst. The predominant microbes present in acclimatized AS were identified using Biolog GEN III analysis, which include the electrogenic genera namely Pseudomonas spp. and Bacillus spp. along with methanogenic archea Methanobacterium spp. The mechanism of electron transfer was elucidated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) which clearly demonstrated the natural metabolite-based electron transfer across the electrode/biofilm/solution interface. The abundance of the electron shuttle metabolites was increased with the microbial growth in the bulk solution as well as in the biofilm leading to a high power generation. The COD removal efficiency and the coulombic efficiency (CE) were found to be 40% and 21%, respectively after 11 days of operation using initial COD of 45,000 mg L-1. The low COD removal efficiency could drastically be increased to 82% when the initial COD of PCW was 5000 mg L-1 generating a power density of 150 mW m-2. The current work proves the feasibility of the MFC for the treatment of acrylic acid plant PCW using acclimatized anaerobic sludge (AS) as a biocatalyst.
Microbial synergistic interactions enhanced power generation in co-culture driven microbial fuel cell

Islam MA, Karim A, Mishra P, Dubowski JJ, Yousuf A, Sarmin S, et al.

Sci Total Environ, 2020 Oct 10;738:140138.
PMID: 32806344 DOI: 10.1016/j.scitotenv.2020.140138

An understanding of the inter-species relationships, especially their metabolic network in a mixed-culture system, is crucial to design an effective inoculum for enhancing the power generation of wastewater fed microbial fuel cell (MFC). In the present study, the influence of microbial mutualistic interactions on the power generation of palm oil mill effluent fed MFCs has been widely investigated by designing several co-culture and mixed culture inoculums. Among the different inoculum compositions, the highest power density of 14.8 W/m3 was achieved by Pseudomonas aeruginosa and Klebsiella variicola co-culture inoculum due to their synergistic relationships which were inter-linked via fermentation-based metabolites. Besides, the interaction of K. variicola and Bacillus cereus positively influenced the power generation resulting in a maximum power density of 11.8 W/m3 whereas the antagonistic relationship between B. cereus and P. aeruginosa resulted in a lower power generation of 1.9 W/m3. The microbial mutualistic interactions were investigated with polarization, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), as well as by using metabolite and biofilm analysis. It was observed that the synergism between bacteria enhanced power generation through the production of higher electron shuttling mediators and efficient biofilm formation as evidenced by polarization, CV and EIS analysis. In contrast, the antagonistic relationship resulted in production of cell inhibiting metabolites leading to the formation of ineffective biofilm. These findings demonstrate that the synergistic interaction between or within microorganisms is emergent in designing co-culture or mixed-culture inoculum for achieving maximum power generation in MFCs.
Augmentation of microbial fuel cell and photocatalytic polishing technique for the treatment of hazardous dimethyl phthalate containing wastewater

Sarmin S, Tarek M, Cheng CK, Roopan SM, Khan MMR

J Hazard Mater, 2021 08 05;415:125587.
PMID: 33721778 DOI: 10.1016/j.jhazmat.2021.125587

In the present paper, the potentiality of integrating microbial fuel cells (MFCs) with a photocatalytic reactor to maximize the wastewater treatment efficiency with concurrent power generation was explored. Dimethyl phthalate (DMP) and acetic acid (AA) were the employed substrate and the co-substrate, respectively, using Pseudomonas aeruginosa as a biocatalyst. MFCs operated by single substrate showed the maximum power generation of 0.75-3.84 W m-3 whereas an addition of AA as the co-substrate yielded 3-12 fold higher power generation. Pseudomonas aeruginosa produced phenazine-1-carboxylic acid in DMP-fed MFC as the metabolite whereas AA along with DMP yielded pyocyanin which reduced the charge transfer resistance. Chemical oxygen demand (COD) removal efficiency in the MFCs was circa 62% after 11 days of operation. Thereafter, it further increased albeit with a drastic reduction in power generation. Subsequently, the MFC anolyte was treated in a photocatalytic reactor under visible light irradiation and catalyzed by CuO-gC3N4. The performance of photocatalytic reactor was evaluated, with COD and total organic carbon (TOC) removal efficiency of 88% and 86% after 200 min of light irradiation. The present work suggests that the MFC can be integrated with photocatalysis as a sustainable wastewater treatment method with concurrent power generation.
Fulltext Growth, pectoralis muscle performance, and testis of pelung cockerels (Gallus gallus gallus [Linnaeus, 1758]) supplemented with blood clam shell powder (Anadara granosa [Linnaeus, 1758])

Yuneldi RF, Airin CM, Saragih HTS, Sarmin S, Astuti P, Alimon AR

Vet World, 2023 Mar;16(3):474-482.
PMID: 37041827 DOI: 10.14202/vetworld.2023.474-482

BACKGROUND AND AIM: Pelung cockerels (Gallus gallus gallus [Linnaeus, 1758]) are different from other native cockerels in that they have a long and unique voice, in addition to their tall, large, and sturdy body with a relatively heavy body weight (BW). The sound quality of pelung cockerels is affected by the structure of the syrinx and their large and strong chest muscles. The performance of the chest muscles, and subsequently its voice, is influenced by the hormone testosterone. The shell of blood clams (Anadara granosa Linnaeus, 1758), a saltwater bivalve is known to contain a natural aromatase blocker (NAB) capable of blocking the aromatase enzyme from converting testosterone to estradiol. This generates consistently high levels of testosterone. This study aimed to determine the effect of blood clam shell powder (BCSP) as an NAB on the growth, pectoralis muscle performance, and testes of pelung cockerels.
MATERIALS AND METHODS: The study design was a completely randomized design, with 16 pelung cockerels aged 40-56 weeks divided into four treatment groups: T0 (control); T1 (BCSP [A. granosa] 0.9 mg/kg BW); T2 (zinc sulfate [ZnSO4] 0.9 mg/kg BW); and T3 (testosterone 3 mg/day). The animals were acclimatized for 7 days and then given dietary treatments for 56 days. The measurement of the comb, wattle, and chest circumference (CC) of pelung cockerels was performed on days 0, 14, 28, 42, and 56. At the end of the treatment, the pelung cockerels were sacrificed and the data of the pectoralis muscle weight (PMW), testis weight (TW), and area of the pectoralis muscle (APM) were measured. Samples of pectoralis muscle and testes were taken and fixed in 10% neutral buffer formalin for histology. The proliferating cell nuclear antigen (PCNA) was identified by immunohistochemical staining. To measure fascicle area (FA), myofiber area (MA), and enumerate, the fascicle myofibers (NM) histology preparations were stained with hematoxylin and eosin (H and E). Testicular preparations were stained with H and E to measure the diameter of the seminiferous tubules (DST) using ImageJ software.
RESULTS: The growth performance on day 56 showed significantly (p < 0.05) higher differences of CC in T1 compared to T2 and T0, in T1 and T3 compared to T0, and in T3 and T2 compared to T0. Pectoralis muscle results, that is, FA, NM, MA, and PCNA-positive cells, showed that cockerels on treatment T3 had significantly higher results than other treatments, T1 was significantly different from T2 and T0, and T2 was significantly different from T0. In addition, the TW and DST measurement of cockerels on treatment T3 were significantly reduced (p < 0.05) than the other treatment groups.
CONCLUSION: The oral administration of BCSP in the role of a NAB at a dose of 0.9 mg/kg BW for 56 days improved the growth performance and pectoralis muscle, especially the CC, FA, NM, MA, and PCNA-positive cells parameters, but did not affect the PMW, APM, and testis of pelung cockerels. The administration of testosterone at 3 mg/day for 56 days contributed to the decrease in TW and DST, as well as atrophy of the seminiferous tubules of pelung cockerels.