Displaying publications 1 - 20 of 30 in total

Abstract:
Sort:
  1. Aziz SA, Nuawi MZ, Nor MJ
    J Occup Health, 2015;57(6):513-20.
    PMID: 26269278 DOI: 10.1539/joh.14-0206-OA
    OBJECTIVE: The objective of this study was to present a new method for determination of hand-arm vibration (HAV) in Malaysian Army (MA) three-tonne truck steering wheels based on changes in vehicle speed using regression model and the statistical analysis method known as Integrated Kurtosis-Based Algorithm for Z-Notch Filter Technique Vibro (I-kaz Vibro).

    METHODOLOGY: The test was conducted for two different road conditions, tarmac and dirt roads. HAV exposure was measured using a Brüel & Kjær Type 3649 vibration analyzer, which is capable of recording HAV exposures from steering wheels. The data was analyzed using I-kaz Vibro to determine the HAV values in relation to varying speeds of a truck and to determine the degree of data scattering for HAV data signals.

    RESULTS: Based on the results obtained, HAV experienced by drivers can be determined using the daily vibration exposure A(8), I-kaz Vibro coefficient (Ƶ(v)(∞)), and the I-kaz Vibro display. The I-kaz Vibro displays also showed greater scatterings, indicating that the values of Ƶ(v)(∞) and A(8) were increasing. Prediction of HAV exposure was done using the developed regression model and graphical representations of Ƶ(v)(∞). The results of the regression model showed that Ƶ(v)(∞) increased when the vehicle speed and HAV exposure increased.

    DISCUSSION: For model validation, predicted and measured noise exposures were compared, and high coefficient of correlation (R(2)) values were obtained, indicating that good agreement was obtained between them. By using the developed regression model, we can easily predict HAV exposure from steering wheels for HAV exposure monitoring.

    Matched MeSH terms: Acceleration
  2. Sharizli AA, Rahizar R, Karim MR, Saifizul AA
    Traffic Inj Prev, 2015;16(2):190-5.
    PMID: 24827899 DOI: 10.1080/15389588.2014.921913
    The increase in the number of fatalities caused by road accidents involving heavy vehicles every year has raised the level of concern and awareness on road safety in developing countries like Malaysia. Changes in the vehicle dynamic characteristics such as gross vehicle weight, travel speed, and vehicle classification will affect a heavy vehicle's braking performance and its ability to stop safely in emergency situations. As such, the aim of this study is to establish a more realistic new distance-based safety indicator called the minimum safe distance gap (MSDG), which incorporates vehicle classification (VC), speed, and gross vehicle weight (GVW).
    Matched MeSH terms: Acceleration
  3. Haulisah NA, Hassan L, Bejo SK, Jajere SM, Ahmad NI
    Front Vet Sci, 2021;8:652351.
    PMID: 33869326 DOI: 10.3389/fvets.2021.652351
    Overuse of antimicrobials in livestock health and production beyond therapeutic needs has been highlighted in recent years as one of the major risk factors for the acceleration of antimicrobial resistance (AMR) of bacteria in both humans and animals. While there is an abundance of reports on AMR in clinical isolates from humans, information regarding the patterns of resistance in clinical isolates from animals is scarce. Hence, a situational analysis of AMR based on clinical isolates from a veterinary diagnostic laboratory was performed to examine the extent and patterns of resistance demonstrated by isolates from diseased food animals. Between 2015 and 2017, 241 cases of diseased livestock were received. Clinical specimens from ruminants (cattle, goats and sheep), and non-ruminants (pigs and chicken) were received for culture and sensitivity testing. A total of 701 isolates were recovered from these specimens. From ruminants, Escherichia coli (n = 77, 19.3%) predominated, followed by Staphylococcus aureus (n = 73, 18.3%). Antibiotic sensitivity testing (AST) revealed that E. coli resistance was highest for penicillin, streptomycin, and neomycin (77-93%). In addition, S. aureus was highly resistant to neomycin, followed by streptomycin and ampicillin (68-82%). More than 67% of E. coli isolates were multi-drug resistant (MDR) and only 2.6% were susceptible to all the tested antibiotics. Similarly, 65.6% of S. aureus isolates were MDR and only 5.5% were susceptible to all tested antibiotics. From non-ruminants, a total of 301 isolates were recovered. Escherichia coli (n = 108, 35.9%) and Staphylococcus spp. (n = 27, 9%) were the most frequent isolates obtained. For E. coli, the highest resistance was against amoxicillin, erythromycin, tetracycline, and neomycin (95-100%). Staphylococcus spp. had a high level of resistance to streptomycin, trimethoprim/sulfamethoxazole, tetracycline and gentamicin (80-100%). The MDR levels of E. coli and Staphylococcus spp. isolates from non-ruminants were 72.2 and 74.1%, respectively. Significantly higher resistance level were observed among isolates from non-ruminants compared to ruminants for tetracycline, amoxicillin, enrofloxacin, and trimethoprim/sulfamethoxazole.
    Matched MeSH terms: Acceleration
  4. Reza SM, Ahmad N, Choudhury IA, Ghazilla RA
    Sensors (Basel), 2014 Mar 04;14(3):4342-63.
    PMID: 24599193 DOI: 10.3390/s140304342
    Human motion is a daily and rhythmic activity. The exoskeleton concept is a very positive scientific approach for human rehabilitation in case of lower limb impairment. Although the exoskeleton shows potential, it is not yet applied extensively in clinical rehabilitation. In this research, a fuzzy based control algorithm is proposed for lower limb exoskeletons during sit-to-stand and stand-to-sit movements. Surface electromyograms (EMGs) are acquired from the vastus lateralis muscle using a wearable EMG sensor. The resultant acceleration angle along the z-axis is determined from a kinematics sensor. Twenty volunteers were chosen to perform the experiments. The whole experiment was accomplished in two phases. In the first phase, acceleration angles and EMG data were acquired from the volunteers during both sit-to-stand and stand-to-sit motions. During sit-to-stand movements, the average acceleration angle at activation was 11°-48° and the EMG varied from -0.19 mV to +0.19 mV. On the other hand, during stand-to-sit movements, the average acceleration angle was found to be 57.5°-108° at the activation point and the EMG varied from -0.32 mV to +0.32 mV. In the second phase, a fuzzy controller was designed from the experimental data. The controller was tested and validated with both offline and real time data using LabVIEW.
    Matched MeSH terms: Acceleration
  5. Samberkar PN
    Am J Forensic Med Pathol, 2012 Mar;33(1):86-7.
    PMID: 21455053 DOI: 10.1097/PAF.0b013e3182186d72
    The victim, a 63-year-old prosperous businessman from Labasa, of the Northern Island (Vanua Levu) of Fiji Islands, was found completely decapitated in the early hours of morning in 2004. Initial police investigation did not reveal any history of any medical or family calamity. Further inquiry by the police revealed that on the previous day the deceased had visited all his friends and relatives, and his behavior was not out of the ordinary. The police suspected it to be a case of homicide. On visit to the scene, a completely decapitated body was found in a van on a downhill road. Tire marks were found on the road. A nylon rope was used for ligature strangulation. At autopsy, the decapitation wound of the head and the torso articulated well. The face was congested, and there was tongue bite. Wound margins were clear-cut, with well-demarcated abrasion and multiple imprints of the nylon rope on the neck. The upper one third of the larynx was attached to the head. No other injuries were found on the body. From the findings, it was obvious that asphyxiation was involved in the death before decapitation.
    Matched MeSH terms: Acceleration
  6. Gouwanda D, Senanayake SM
    J Biomech, 2011 Mar 15;44(5):972-8.
    PMID: 21306714 DOI: 10.1016/j.jbiomech.2010.12.013
    Injury to a lower limb may disrupt natural walking and cause asymmetrical gait, therefore assessing the gait asymmetry has become one of the important procedures in gait analysis. This paper proposes the use of wireless gyroscopes as a new instrument to determine gait asymmetry. It also introduces two novel approaches: normalized cross-correlations (Cc(norm)) and Normalized Symmetry Index (SI(norm)). Cc(norm) evaluates the waveform patterns generated by the lower limb in each gait cycle. SI(norm) provides indications on the timing and magnitude of the bilateral differences between the limbs while addressing the drawbacks of the conventional methods. One-way ANOVA test reveals that Cc(norm) can be considered as single value indicator that determines the gait asymmetry (p<0.01). The experiment results showed that SI(norm) in asymmetrical gait were different from normal gait. SI(norm) in asymmetrical gait were found to be approximately 20% greater than SI(norm) in normal gait during pre-swing and initial swing.
    Matched MeSH terms: Acceleration
  7. Ong SQ, Ahmad H, Mohd Ngesom AM
    Infect Dis Rep, 2021 Feb 05;13(1):148-160.
    PMID: 33562890 DOI: 10.3390/idr13010016
    We aim to investigate the effect of large-scale human movement restrictions during the COVID-19 lockdown on both the dengue transmission and vector occurrences. This study compared the weekly dengue incidences during the period of lockdown to the previous years (2015 to 2019) and a Seasonal Autoregressive Integrated Moving Average (SARIMA) model that expected no movement restrictions. We found that the trend of dengue incidence during the first two weeks (stage 1) of lockdown decreased significantly with the incidences lower than the lower confidence level (LCL) of SARIMA. By comparing the magnitude of the gradient of decrease, the trend is 319% steeper than the trend observed in previous years and 650% steeper than the simulated model, indicating that the control of population movement did reduce dengue transmission. However, starting from stage 2 of lockdown, the dengue incidences demonstrated an elevation and earlier rebound by four weeks and grew with an exponential pattern. We revealed that Aedes albopictus is the predominant species and demonstrated a strong correlation with the locally reported dengue incidences, and therefore we proposed the possible diffusive effect of the vector that led to a higher acceleration of incidence rate.
    Matched MeSH terms: Acceleration
  8. Shahrin AA, Ghani SHA, Norman NH
    Korean J Orthod, 2021 Mar 25;51(2):86-94.
    PMID: 33678624 DOI: 10.4041/kjod.2021.51.2.86
    Objective: This study aimed to investigate the effect of micro-osteoperforations (MOPs) on external apical root resorption (EARR) during the initial orthodontic alignment phase of maxillary anterior crowding.

    Methods: Thirty patients (25 females, 5 males; mean age, 22.66 ± 3.27 years) who presented with moderate crowding of the upper labial segment and underwent extraction-based fixed appliance treatment were recruited. They were randomly allocated to receive adjunctive therapy with MOPs (n = 15) or treatment with fixed appliances only (control group; n = 15). EARR was measured from long-cone periapical radiographs taken at the start and the sixth month of treatment. A correction factor for the enlargement difference was used to calculate EARR. Data were analyzed with descriptive statistics and repeated-measures analysis of variance.

    Results: The mean root lengths of 168 teeth were measured and showed no statistically significant difference (p > 0.05) after six months of fixed appliance treatment in the MOP (mean difference [MD] = 0.13 mm; 95% confidence interval [CI] = -0.10-0.35) and control group (MD = 0.14 mm; 95% CI = -0.10-0.37). Most of the roots in the MOP and control groups (42.86% and 52.38%, respectively) showed only mild resorption. Less than 8% of the roots in both groups (7.14% in the MOP group and 4.76% in the control group) showed moderate resorption.

    Conclusions: Acceleration of orthodontic tooth movement with adjunctive MOPs therapy during the alignment phase does not exacerbate EARR in patients with moderate crowding of the upper labial segment in comparison with controls.

    Matched MeSH terms: Acceleration
  9. Lombe D, Sullivan R, Caduff C, Ali Z, Bhoo-Pathy N, Cleary J, et al.
    Ecancermedicalscience, 2021;15:1202.
    PMID: 33889211 DOI: 10.3332/ecancer.2021.1202
    Introduction: Public health emergencies and crises such as the current COVID-19 pandemic can accelerate innovation and place renewed focus on the value of health interventions. Capturing important lessons learnt, both positive and negative, is vital. We aimed to document the perceived positive changes (silver linings) in cancer care that emerged during the COVID-19 pandemic and identify challenges that may limit their long-term adoption.

    Methods: This study employed a qualitative design. Semi-structured interviews (n = 20) were conducted with key opinion leaders from 14 countries. The participants were predominantly members of the International COVID-19 and Cancer Taskforce, who convened in March 2020 to address delivery of cancer care in the context of the pandemic. The Framework Method was employed to analyse the positive changes of the pandemic with corresponding challenges to their maintenance post-pandemic.

    Results: Ten themes of positive changes were identified which included: value in cancer care, digital communication, convenience, inclusivity and cooperation, decentralisation of cancer care, acceleration of policy change, human interactions, hygiene practices, health awareness and promotion and systems improvement. Impediments to the scale-up of these positive changes included resource disparities and variation in legal frameworks across regions. Barriers were largely attributed to behaviours and attitudes of stakeholders.

    Conclusion: The COVID-19 pandemic has led to important value-based innovations and changes for better cancer care across different health systems. The challenges to maintaining/implementing these changes vary by setting. Efforts are needed to implement improved elements of care that evolved during the pandemic.

    Matched MeSH terms: Acceleration
  10. Byrnes G, Libby T, Lim NT, Spence AJ
    J Exp Biol, 2011 Aug 15;214(Pt 16):2690-6.
    PMID: 21795564 DOI: 10.1242/jeb.052993
    Gliding is thought to be an economical form of locomotion. However, few data on the climbing and gliding of free-ranging gliding mammals are available. This study employed an animal-borne three-dimensional acceleration data-logging system to collect continuous data on the climbing and gliding of free-ranging Malayan colugos, Galeopterus variegatus. We combined these movement data with empirical estimates of the metabolic costs to move horizontally or vertically to test this long-standing hypothesis by determining whether the metabolic cost to climb to sufficient height to glide a given distance was less than the cost to move an equivalent distance horizontally through the canopy. On average, colugos climb a short distance to initiate glides. However, due to the high energetic cost of climbing, gliding is more energetically costly to move a given horizontal distance than would be predicted for an animal travelling the same distance through the canopy. Furthermore, because colugos spend a small fraction of their time engaged in locomotor activity, the high costs have little effect on their overall energy budget. As a result, the energetic economy hypothesis for the origins of gliding is not supported. It is likely that other ecologically relevant factors have played a greater role in the origins of gliding in colugos and other mammals.
    Matched MeSH terms: Acceleration
  11. Khoo HL, Ahmed M
    Accid Anal Prev, 2018 Apr;113:106-116.
    PMID: 29407657 DOI: 10.1016/j.aap.2018.01.025
    This study had developed a passenger safety perception model specifically for buses taking into consideration the various factors, namely driver characteristics, environmental conditions, and bus characteristics using Bayesian Network. The behaviour of bus driver is observed through the bus motion profile, measured in longitudinal, lateral, and vertical accelerations. The road geometry is recorded using GPS and is computed with the aid of the Google map while the perceived bus safety is rated by the passengers in the bus in real time. A total of 13 variables were derived and used in the model development. The developed Bayesian Network model shows that the type of bus and the experience of the driver on the investigated route could have an influence on passenger's perception of their safety on buses. Road geometry is an indirect influencing factor through the driver's behavior. The findings of this model are useful for the authorities to structure an effective strategy to improve the level of perceived bus safety. A high level of bus safety will definitely boost passenger usage confidence which will subsequently increase ridership.
    Matched MeSH terms: Acceleration
  12. Saifizul AA, Yamanaka H, Karim MR
    Accid Anal Prev, 2011 May;43(3):1068-73.
    PMID: 21376903 DOI: 10.1016/j.aap.2010.12.013
    Most highly motorized countries in the world have implemented different speed limits for light weight and heavy weight vehicles. The heavy vehicle speed limit is usually chosen to be lower than that of passenger cars due to the difficulty for the drivers to safely maneuver the heavy vehicle at high speed and greater impact during a crash. However, in many cases, the speed limit for heavy vehicle is set by only considering the vehicle size or category, mostly due to simplicity in enforcement. In this study, traffic and vehicular data for all vehicle types were collected using a weigh-in-motion system installed at Federal Route 54 in Malaysia. The first finding from the data showed that the weight variation for each vehicle category is considerable. Therefore, the effect of gross vehicle weight (GVW) and category of heavy vehicle on free flow speed and their interaction were analyzed using statistical techniques. Empirical analysis results showed that statistically for each type of heavy vehicle, there was a significant relationship between free flow speed of a heavy vehicle and GVW. Specifically, the results suggest that the mean and variance of free flow speed decrease with an increase GVW by the amount unrelated to size and shape for all GVW range. Then, based on the 85th percentile principle, the study proposed a new concept for setting the speed limit for heavy vehicle by incorporating GVW where a different speed limit is imposed to the heavy vehicle, not only based on vehicle classification, but also according to its GVW.
    Matched MeSH terms: Acceleration*
  13. Mohamad FF, Abdullah AS, Mohamad J
    Traffic Inj Prev, 2019;20(5):478-483.
    PMID: 31188019 DOI: 10.1080/15389588.2019.1612057
    Objective: The increasing number of road crashes and fatalities on Malaysian federal roads is a cause for concern. The main causes of road crashes and fatalities on federal roads have been attributed to the speeding behavior among drivers. As such, this research investigates the possible predictors from sociodemographic characteristics and attitudes in predicting speeding behavior among drivers on Malaysia federal roads. Methods: A face-to-face survey was conducted via purposive sampling on 300 drivers at rest areas at 6 crash hotspots on Malaysian federal roads. A set of questions related to speeding behavior was developed. The questionnaire consisted of 10 questions related to sociodemographic characteristics of the participants, 37 questions regarding attitudes toward speeding, and 1 question regarding speeding behavior. Subsequently, the sociodemographics were analyzed using binary logistic regression and the attitude variable was analyzed using factor analysis and binary logistic regression. Results: The findings from the sociodemographic data revealed that male gender, single/separated status, broad driving experience, crash experience, and leisure/vacation trip purposes emerged as significant predictors for speeding behavior. Additionally, the results of factor analysis for the attitude variable revealed 3 components: Affective, behavioral, and cognitive. These 3 components are originally derived from the ABC model of attitude (affective, behavioral, and cognitive) that was adapted in this study. Furthermore, the findings from binary logistic regression appeared consistent with the model assumption, signifying that behavioral aspects significantly influenced speeding behavior among drivers. Nevertheless, affective and cognitive components were insignificant predictors. Furthermore, strong agreement with speeding countermeasures was observed among the participants. Conclusion: In conclusion, sociodemographic characteristics and attitude have been proven to affect speeding behavior among drivers on Malaysian federal roads. The findings have important implications in designing driver risk profiles on federal roads to develop suitable countermeasures based on the 4E approach (engagement, education, enforcement, and engineering) to enhance road safety.
    Matched MeSH terms: Acceleration*
  14. Hassan MA, Mahmoodian R, Hamdi M
    Sci Rep, 2014;4:3724.
    PMID: 24430621 DOI: 10.1038/srep03724
    A modified smoothed particle hydrodynamic (MSPH) computational technique was utilized to simulate molten particle motion and infiltration speed on multi-scale analysis levels. The radial velocity and velocity gradient of molten alumina, iron infiltration in the TiC product and solidification rate, were predicted during centrifugal self-propagating high-temperature synthesis (SHS) simulation, which assisted the coating process by MSPH. The effects of particle size and temperature on infiltration and solidification of iron and alumina were mainly investigated. The obtained results were validated with experimental microstructure evidence. The simulation model successfully describes the magnitude of iron and alumina diffusion in a centrifugal thermite SHS and Ti + C hybrid reaction under centrifugal acceleration.
    Matched MeSH terms: Acceleration
  15. James C, Dhawan A, Jones T, Pok C, Yeo V, Girard O
    J Sports Sci Med, 2021 03;20(1):101-109.
    PMID: 33707993 DOI: 10.52082/jssm.2021.101
    This study investigated the relationships between internal and external training load metrics across a 2-week 'in-season' microcycle in squash. 134 on-court and 32 off-court 'conditioning' sessions were completed by fifteen elite squash players with an average (±SD) of 11 ± 3 per player. During every session, external load was captured using a tri-axial accelerometer to calculate Playerload; i.e., the instantaneous rate of change of acceleration across 3-dimensional planes. Internal load was measured using heart rate (HR), global (sRPE) and differential RPE (dRPE-Legs, dRPE-Breathing). Additionally, HR was used to calculate Banister's, Edward's and TEAM TRIMPs. Across 166 training sessions, Playerload was moderately correlated with TRIMP-Banister (r = 0.43 [95% CI: 0.29-0.55], p < 0.001) and TRIMP-Edwards (r = 0.50 [0.37-0.61], p < 0.001). Association of Playerload with TRIMP-TEAM (r = 0.24 [0.09-0.38], p = 0.001) was small. There was a moderate correlation between sRPE and Playerload (r = 0.46 [0.33-0.57], p < 0.001). Association of sRPE was large with TRIMP-Banister (r = 0.68 [0.59-0.76], p = 0.001), very large with TRIMP-Edwards (r = 0.79 [0.72-0.84], p < 0.001) and moderate with TRIMP-TEAM (r = 0.44 [0.31-0.56], p < 0.001). Both dRPE-Legs (r = 0.95 [0.93-0.96], p < 0.001) and dRPE-Breathing (r = 0.92 [0.89-0.94], p < 0.001) demonstrated nearly perfect correlations with sRPE and with each other (r = 0.91 [0.88-0.93], p < 0.001). Collection of both internal and external training load data is recommended to fully appreciate the physical demands of squash training. During a training microcycle containing a variety of training sessions, interpreting internal or external metrics in isolation may underestimate or overestimate the training stress a player is experiencing.
    Matched MeSH terms: Acceleration
  16. Naomi R, Ratanavaraporn J, Fauzi MB
    Materials (Basel), 2020 Jul 10;13(14).
    PMID: 32664418 DOI: 10.3390/ma13143097
    The use of hybridisation strategy in biomaterials technology provides a powerful synergistic effect as a functional matrix. Silk fibroin (SF) has been widely used for drug delivery, and collagen (Col) resembles the extracellular matrix (ECM). This systematic review was performed to scrutinise the outcome of hybrid Col and SF for cutaneous wound healing. This paper reviewed the progress of related research based on in vitro and in vivo studies and the influence of the physicochemical properties of the hybrid in wound healing. The results indicated the positive outcome of hybridising Col and SF for cutaneous wound healing. The hybridisation of these biomaterials exhibits an excellent moisturising property, perfectly interconnected structure, excellent water absorption and retention capacity, an acceptable range of biodegradability, and synergistic effects in cell viability. The in vitro and in vivo studies clearly showed a promising outcome in the acceleration of cutaneous wound healing using an SF and Col hybrid scaffold. The review of this study can be used to design an appropriate hybrid scaffold for cutaneous wound healing. Therefore, this systematic review recapitulated that the hybridisation of Col and SF promoted rapid cutaneous healing through immediate wound closure and reepithelisation, with no sign of adverse events. This paper concludes on the need for further investigations of the hybrid SF and Col in the future to ensure that the hybrid biomaterials are well-suited for human skin.
    Matched MeSH terms: Acceleration
  17. Bilal M, Shah JA, Qureshi IM, Kadir K
    Int J Biomed Imaging, 2018;2018:7803067.
    PMID: 29610569 DOI: 10.1155/2018/7803067
    Transformed domain sparsity of Magnetic Resonance Imaging (MRI) has recently been used to reduce the acquisition time in conjunction with compressed sensing (CS) theory. Respiratory motion during MR scan results in strong blurring and ghosting artifacts in recovered MR images. To improve the quality of the recovered images, motion needs to be estimated and corrected. In this article, a two-step approach is proposed for the recovery of cardiac MR images in the presence of free breathing motion. In the first step, compressively sampled MR images are recovered by solving an optimization problem using gradient descent algorithm. TheL1-norm based regularizer, used in optimization problem, is approximated by a hyperbolic tangent function. In the second step, a block matching algorithm, known as Adaptive Rood Pattern Search (ARPS), is exploited to estimate and correct respiratory motion among the recovered images. The framework is tested for free breathing simulated andin vivo2D cardiac cine MRI data. Simulation results show improved structural similarity index (SSIM), peak signal-to-noise ratio (PSNR), and mean square error (MSE) with different acceleration factors for the proposed method. Experimental results also provide a comparison betweenk-tFOCUSS with MEMC and the proposed method.
    Matched MeSH terms: Acceleration
  18. Ravanfar SA, Razak HA, Ismail Z, Monajemi H
    Sensors (Basel), 2015;15(9):22750-75.
    PMID: 26371005 DOI: 10.3390/s150922750
    This paper reports on a two-step approach for optimally determining the location and severity of damage in beam structures under flexural vibration. The first step focuses on damage location detection. This is done by defining the damage index called relative wavelet packet entropy (RWPE). The damage severities of the model in terms of loss of stiffness are assessed in the second step using the inverse solution of equations of motion of a structural system in the wavelet domain. For this purpose, the connection coefficient of the scaling function to convert the equations of motion in the time domain into the wavelet domain is applied. Subsequently, the dominant components based on the relative energies of the wavelet packet transform (WPT) components of the acceleration responses are defined. To obtain the best estimation of the stiffness parameters of the model, the least squares error minimization is used iteratively over the dominant components. Then, the severity of the damage is evaluated by comparing the stiffness parameters of the identified model before and after the occurrence of damage. The numerical and experimental results demonstrate that the proposed method is robust and effective for the determination of damage location and accurate estimation of the loss in stiffness due to damage.
    Matched MeSH terms: Acceleration
  19. Sarih NM, Romero-Perez D, Bastani B, Rauytanapanit M, Boisdon C, Praneenararat T, et al.
    Sci Rep, 2020 12 09;10(1):21504.
    PMID: 33299034 DOI: 10.1038/s41598-020-78133-4
    Paper spray ionization (PSI) mass spectrometry (MS) is an emerging tool for ambient reaction monitoring via microdroplet reaction acceleration. PSI-MS was used to accelerate and monitor the time course of the reaction of dansyl chloride with aniline, in acetonitrile, to produce dansyl aniline. Three distinct PSI arrangements were explored in this study representing alternative approaches for sample loading and interaction; conventional single tip as well as two novel setups, a dual-tip and a co-axial arrangement were designed so as to limit any on-paper interaction between reagents. The effect on product abundance was investigated using these different paper configurations as it relates to the time course and distance of microdroplet travel. It was observed that product yield increases at a given distance and then decreases thereafter for all PSI configurations. The fluorescent property of the product (dansyl aniline) was used to visually inspect the reaction progress on the paper substrate during the spraying process. Amongst the variety of sample loading methods the novel dual-tip arrangement showed an increased product yield and microdroplet density, whilst avoiding any on-paper interaction between the reagents.
    Matched MeSH terms: Acceleration
  20. Zainap Lamat, Yuhani Jamian, Mohd Agus Adib Eskandar
    MyJurnal
    Sarawak has experienced several earthquakes of local origin and was also affected by long-distance earthquake that originated from Southern Philippine and the Straits of Macassar, Sulu Sea and Celebes Sea. The objectives for this study were to conduct site specific ground response analysis and develop design response spectra for Bakun area by using 1-D equivalent linear ground response analysis. The site characterisation was carried out utilising the soil profile and soil property data of the selected site. Local surface fault ruptures were investigated for possible hazards due to intraplate earthquakes. Earthquake ground motion records were selected based on characteristics of the controlling earthquakes for an area and the maximum magnitude faults were considered for risk assessment. The site-specific response spectra represent the predicted surface ground motions that reflect the levels of strong motion amplitude and frequency content at a particular site. The site-specific ground response analysis for Bakun site found that the peak ground acceleration at bedrock was amplified from 0.16 g to 0.33 g at the ground surface.
    Matched MeSH terms: Acceleration
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links