Coronal malalignment due to malrotated trochanteric nail placement in femoral fracture fixation has never been reported. We present a case of a femoral segmental fracture fixed with a trochanteric nail, with a malrotated placement resulting in a valgus malaligned nail and femur, associated with a rotational malalignment. Knowledge of the modern nail design with proper intra-operative precautions, would avoid this underestimated technical error.
Cases of retained surgical guaze are rarely reported because of medico-legal and professional implications. Retained gauze for a period of more than 10 years is even rarer. A case of retained surgical gauze for 11 years, an accidental finding from a plain radiograph of a patient who had sustained proximal femoral fracture, is reported. A review of other reported cases is presented.
Background and Objectives: Hip fractures constitute the most debilitating complication of osteoporosis with steadily increasing incidences in the aging population. Their intramedullary nailing can be challenging because of poor anchorage in the osteoporotic femoral head. Cement augmentation of Proximal Femoral Nail Antirotation (PFNA) blades demonstrated promising results by enhancing cut-out resistance in proximal femoral fractures. The aim of this study was to assess the impact of augmentation on the fixation strength of TFN-ADVANCEDTM Proximal Femoral Nailing System (TFNA) blades and screws within the femoral head and compare its effect when they are implanted in centre or anteroposterior off-centre position. Materials and Methods: Eight groups were formed out of 96 polyurethane low-density foam specimens simulating isolated femoral heads with poor bone quality. The specimens in each group were implanted with either non-augmented or cement-augmented TFNA blades or screws in centre or anteroposterior off-centre positions, 7 mm anterior or posterior. Mechanical testing was performed under progressively increasing cyclic loading until failure, in setup simulating an unstable pertrochanteric fracture with a lack of posteromedial support and load sharing at the fracture gap. Varus-valgus and head rotation angles were monitored. A varus collapse of 5° or 10° head rotation was defined as a clinically relevant failure. Results: Failure load (N) for specimens with augmented TFNA head elements (screw/blade centre: 3799 ± 326/3228 ± 478; screw/blade off-centre: 2680 ± 182/2591 ± 244) was significantly higher compared with respective non-augmented specimens (screw/blade centre: 1593 ± 120/1489 ± 41; screw/blade off-centre: 515 ± 73/1018 ± 48), p < 0.001. For both non-augmented and augmented specimens failure load in the centre position was significantly higher compared with the respective off-centre positions, regardless of the head element type, p < 0.001. Augmented off-centre TFNA head elements had significantly higher failure load compared with non-augmented centrally placed implants, p < 0.001. Conclusions: Cement augmentation clearly enhances the fixation stability of TFNA blades and screws. Non-augmented blades outperformed screws in the anteroposterior off-centre position. Positioning of TFNA blades in the femoral head is more forgiving than TFNA screws in terms of failure load.
In an open fracture, the external fixator is one of the definitive treatment options as it could provide the initial stabilisation of the fractured bone. Limited literature discussing on the biomechanical stability between unilateral, hybrid and Ilizarov configurations, principally in treating a femoral fracture. Thus, this study aims to analyse the biomechanical stability of different external fixators via the finite element method (FEM). The present study portrays that different configurations of fixators possess different biomechanical stability, hence leading to different healing rates and complication risks. For the methodology, three-dimensional models of three different external fixators were reconstructed where axial loads were applied on the proximal end of the femur, simulating the stance phase. From the results, the unilateral configuration provides better stability compared to the hybrid and Ilizarov, where it displaced the least with an average percentage difference of 50% for the fixator's frame and 23% for the bone. The unilateral configuration also produced the least interfragmentary movement (0.48 mm) as compared to hybrid (0.62 mm) and Ilizarov (0.61 mm) configurations. Besides, the strain and stress of the unilateral configuration were superior in terms of stability compared to the other two configurations. As a conclusion, the unilateral configuration had the best biomechanical stability as it was able to assist the bone healing process as well as minimising the risk of pin tract infection while treating a femoral fracture.
Fat embolism syndrome is a well-recognised sequela of long bone trauma as well as intramedullary orthopaedic procedures. However, it has rarely been described following manipulation, reduction of fracture, and application of external fixator. Furthermore, bilateral ocular blindness is seldom the first manifestation; instead respiratory and other cerebral symptoms being most common. We describe a case with this rare presentation in a patient who underwent a trial of closed reduction, then open reduction of a femur fracture, followed by external fixation performed at day 47 post-initial trauma.
Interlocked intramedullary nailing is accepted as the gold standard for femoral shaft fractures. However for Winquist type I and II femoral fractures at the isthmus region, unlocked intramedullary nailing (Küntscher nailing) is still a good option. We performed a retrospective study on 86 patients with a total of 88 femoral shaft fractures around the isthmus that presented at our institution between 1 January 1988 and 31 August 2003. All patients (84.1% Winquist type I and 15.9% Winquist Type II fractures) were treated with unlocked intramedullary nail. The average time to union was 16 weeks with 97.7% rate of union. There were two cases (2.3%) of infection and non-union each. Overall results were comparable to standard interlocking intramedullary nailing. We conclude that unlocked intramedullary nailing is a good treatment option for Winquist Type I and II femoral fracture around the isthmus with its good union rate and minimal complications.
Interlocking intramedullary nailing is suitable for comminuted femoral isthmus fractures, but for noncomminuted fractures its benefit over unlocked nailing is debatable. This study was undertaken to compare outcomes of interlocking nailing versus unlocked intramedullary nailing in such fractures. Ninety-three cases of noncomminuted femoral isthmus fractures (Winquist I and II) treated with interlocking nailing and unlocked nailing from 1 June 2004 to 1 June 2005 were reviewed; radiological and clinical union rates, bony alignment, complication and knee function were investigated. There was no statistical significant difference with regard to union rate, implant failure, infection and fracture alignment in both study groups. Open fixation with unlocked femoral nailing is technically less demanding and requires less operating time; additionally, there is no exposure to radiation and cost of the implant is cheaper. We therefore conclude that unlocked nailing is still useful for the management of non-comminute isthmus fractures of the femur.
We conducted a retrospective review on eleven patients who were treated for Type A and C distal femoral fractures (based on AO classification) between January 2004 and December 2004. All fractures were fixed with titanium distal femoral locking compression plate. The patient’s ages ranged from 15 to 85 with a mean of 44. Clinical assessment was conducted at least 6 months post-operatively using the Schatzker scoring system. Results showed that four patients had excellent results, four good, two fair and one failure.
Open reduction and internal fixation using
conventional lateral distal femur locking plate is a
standard operative method for distal femur fracture.
This case series describes medial plating of distal
femur fracture using proximal tibia locking plate that
is anatomically fit to the medial aspect of distal femur,
by the minimally invasive plate osteosynthesis (MIPO)
technique which gives a stable construct with good
outcome.
Fracture healing is a complex process, which is further complicated if the bone is osteoporotic. Calcium is one of the important minerals in bone and has been found to prevent osteoporosis but its role in fracture healing of osteoporotic bone is still unclear. We carried out a study on the effects of calcium supplementation on the late phase healing of fractured osteoporotic bone using an ovariectomized rat model. Twenty-four female Sprague-Dawley rats were divided into three groups: sham-operated (SO), ovariectomized-control (OVXC), and ovariectomized + calcium supplements (Ca). The right femurs of all the rats were fractured at mid-epiphysis and a K-wire was inserted for internal fixation. After 2 months of treatment, the rats were sacrificed and the femora were dissected out for radiological and biomechanical assessment. As expected, osteoporosis resulted in impaired healing as shown by the poor radiological and biomechanical properties of the OVXC group. CT scans showed significantly lower callus volumes in the SO and Ca groups compared to the OVXC group. Radiological scoring of fracture healing and callus staging of the SO and Ca groups were better than the OVXC group. However, the biomechanical parameters of the Ca group were significantly lower than the SO group and similar to the OVXC group. Therefore, calcium supplements may appear to improve fracture healing of osteoporotic bone but failed to improve strength.
Thirty-two children with femoral shaft fractures were treated conservatively with initial skin traction followed by an additional period in a spica cast. After 12 to 20 months of follow up, none had any pain and all of them were attending school without problems. Shortening of more than 2 cm occurred in 6 (19%) of the 32 patients. The most important factor associated with shortening was an overlap of more than 2 cm of shortening of the fracture ends at the time of cast fitting. The average compensatory overgrowth at final assessment was 7 mm. Angular deformity did not pose a problem. This is a safe, simple and practical method to treat childhood femoral shaft fractures.
This is a prospective study to look at the outcome of unilateral proximal third femoral shaft fractures in children treated with a bilateral Thomas splint in the Department of Orthopaedic Surgery Universiti Kebangsaan Malaysia between the period of January 1996 and June 1998. Eighteen children aged between 2 years and 12 years old with unilateral proximal third fractures of the femoral shaft were treated using a bilateral Thomas splint. Angular deformities were measured using a goniometer metric scale before and after Thomas splints. The percentage of varus tilt corrected ranged from 17% to 72% with an average correction of 29% from the initial deformity and the difference was statistically significant (p < 0.05). The percentage of posterior tilt corrected ranged from 19% to 60% with the average correction of 20% from the initial deformity. The difference was statistically significant (p < 0.05). From this study, we conclude that bilateral Thomas splints can give a better correction of angular deformity for proximal third femoral shaft fractures in children below twelve years of age.
Twenty-four children under the age of 10 years with femoral shaft fractures were treated by early immobilization of fracture and application of hip spica cast. The average hospital stay was 3.5 days. The average shortening at time of fracture union was 15 mm. The average time of follow up was 6.7 months. All fractures healed, except for one, in an acceptable position. The average shortening at last follow up was 9.5 mm and the average overgrowth up to the time was 6 mm. There was no incidence of refracture, joint stiffness or any pressure sore.
A series of 23 fractures of the femur were treated using femoral interlocking nails. The average follow-up period was 14.8 months. There were 14 closed fractures and 9 compound fractures. Closed nailing was done for 8 patients and open nailing for 15 patients. All the fractures united. There were no superficial or deep infections. The most common complication was leg length discrepancy; shortening occurred in 5 patients whereas lengthening occurred in 2 patients. It is a technically demanding procedure but it is the method of choice in our Institution for stabilising complex fractures of the femoral shaft.
Femoral fractures are one of the commonest fractures encountered in orthopaedic practice. Over the years, treatment of this injury has evolved tremendously. The initial non-operative methods of reduction and stabilization have largely been replaced by operative fixation. There are currently three basic modes of internal fixation of femoral diaphyseal fractures in the adult age group: plate and screws, intramedullary Kuntscher nailing, and interlocking nailing. The objective of this study is to determine whether the so-called more ‘technologically advanced’ interlocking nailing results in better outcome compared to the more ‘traditional’ plate and screws, and Kuntscher nailing. It is found that, in terms of time to union and final function after an average of just under 2 years post-operative period, the group of patients who had interlocking nailing fared poorer. A review of relevant literature will then be presented.
This study was undertaken to investigate the outcome of traumatic intracapsular neck of femur fractures treated with total hip arthroplasty (THA). Patients aged >=60 years who underwent THA for traumatic intracapsular neck of femur fractures from January 2005 to March 2009 were included in the study. Telephone or personal interviews were conducted. There were 49 patients identified within the study period. The mean age was 74.12 years. Most patients were females 81.6%), with a male: female ratio of 1: 4.4. In total, 29 patients were available for outcome scoring. The one-month mortality rate was 4.1%, and the one-year mortality rate was 20.5%. Of the 29 patients 82.8% obtained a Zukerman Functional Outcome Score of good (80 – 100) and 13.8% obtained a score of fair (60 – 80). THA for the treatment of traumatic neck of femur fractures in elderly is a good option with 96.6% of patients obtaining a satisfactory functional outcome, with acceptable morbidity and mortality statistics.
This retrospective radiographic analysis of 57 patients (62 knees) examined two possible factors involved in pin tract fractures of the femur due to navigated total knee arthroplasty (TKA): the angle of the tracker pin with respect to the lateral femoral cortex, and the distance between the tracker pin and the lateral joint line. Our findings demonstrate a relationship between postoperative pin tract induced stress fractures (3 patients), with pin tract angles exceeding 15°. Pin placement at a site more than 10cm from the lateral joint line, did not show any significant association with risk of fracture. These findings lead to enhanced understanding of the causative factors underlying pin track femoral fractures in TKAs.
Fracture of the femur is most commonly treated with interlocking nailing. We conducted this study to describe and analyze the size of femoral interlocking nails used in our local population. This is a retrospective study on reamed intramedullary interlocking nailing procedures performed between 1st July 1998 and 30th June 2003. Demographic data, the diameter and length of femoral nails used were obtained from patient's medical record. A total of 267 procedures were included. The most common diameter used was 10 mm (56.9%), followed by 11 mm (27.0%) and 12 mm (13.1%). Only 2.6% of the nails were less than 10 mm in diameter. The most common nail length was 38 cm (31.1%), followed by 36 cm (24.9%) and 40 cm (19.5%). The longest nail used was 46 cm while the shortest 32 cm. The most commonly used femoral nails were of 10 mm diameter with the length ranging from 36 to 40 cm, which is smaller than those reported in the English literature. Nails with diameter smaller than 10 mm were required in 2.6% of patients.