MyMedR

Displaying publications 1 - 20 of 34 in total

Abstract:

Sort:

Fulltext Sodium content in sauces-a major contributor of sodium intake in Malaysia: a cross-sectional survey

Shahar S, You YX, Zainuddin NS, Michael V, Ambak R, Haron H, et al.

BMJ Open, 2019 05 27;9(5):e025068.
PMID: 31133578 DOI: 10.1136/bmjopen-2018-025068

OBJECTIVE: To investigate the sodium content in sauces sold in Malaysian supermarkets.
METHODS: A cross-sectional market survey was conducted in 2017 of 233 sauces sold in Malaysian supermarkets. Information on the sodium content was collected from the product packaging and nutrient information panels of the sauces sold in the seven top supermarkets in the capital of Malaysia.
RESULTS: Of the 233 sauces surveyed, 116 did not include sodium content information on the nutrient information panel (49.8%). Soy sauce (particularly sweet soy sauce) and ketchup (particularly chilli sauce) were found to be the highest number of products surveyed in the analysis (N=54 and N=48, respectively). The highest sodium content information was displayed by fish/prawn sauce (budu/cencalok) (5192±3228 mg/100 g) which was followed by the light/thin soy sauce (5116±2084 mg/100 g), and followed by salty soy sauce (4780±988 mg/100 g). The sodium content information of the imported sauces was higher compared with local products produced in Malaysia. However, for sweet soy sauce, the sodium content information of the local products was higher compared with the imported products. Of the 116 sauces which displayed information regarding their sodium content, only 18.2% of the salty soy sauce and 25% of the light/thin soy sauce were found to be below the 2017 Malaysian sodium guidelines. Furthermore, only 21.7% of chilli ketchup and no tomato ketchup were below the 2017 UK salt guidelines.
CONCLUSIONS: Almost half of the sauces surveyed did not include sodium content information on the nutrient information panel. It is recommended that sodium content information is provided on all sauces sold in Malaysia. Also, manufacturers should be urged to reduce the sodium content level of their sauces to a minimum of 5%.

Matched MeSH terms: Product Packaging
Some of the properties of flame retardant medium density fiberboard made from rubberwood and recycled containers containing aluminum trihydroxide

Hashim R, How LS, Kumar RN, Sulaiman O

Bioresour Technol, 2005 Nov;96(16):1826-31.
PMID: 16051090

The flame retardancy of medium density fiberboard (MDF) made from mixture of rubberwood fibers and recycled old corrugated containers was studied. Aluminum trihydroxide (ATH) was used as a fire retardant additive and mixed with the fibers to manufacture experimental MDF panels using wet process. Phenol formaldehyde (PF) resin in liquid, 2% based on oven dry weight of fibers, was used along with 0%, 10%, 15% and 20% of ATH. The flame retardant test was done using the limiting oxygen index (LOI) test. The other properties investigated include internal bond strength, thickness swelling and water absorption. The results showed that ATH loading increased as the LOI of MDF increased. This demonstrated that ATH could improved the fire retardant property of MDF at sufficient loading. An increase in concentration of ATH showed an increase in the IB values of MDF made without resin. MDF panels made without resin showed a progressive increase in internal bond as the composition of recycled old corrugated containers fiber increased. Addition of resin improved internal bond strength and reduced thickness swelling, and water absorption. Thickness swelling of panel increased as the composition of recycled old corrugated containers fiber increased. Scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) showed that there is indication of ATH and resin filling the void space in between fibers.

Matched MeSH terms: Product Packaging
Polymer blend of PLA/PHBV based bionanocomposites reinforced with nanocrystalline cellulose for potential application as packaging material

Dasan YK, Bhat AH, Ahmad F

Carbohydr Polym, 2017 Feb 10;157:1323-1332.
PMID: 27987839 DOI: 10.1016/j.carbpol.2016.11.012

The current research discusses the development of poly (lactic acid) (PLA) and poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced nanocrystalline cellulose bionanocomposites. The nanocrystalline cellulose was derived from waste oil palm empty fruit bunch fiber by acid hydrolysis process. The resulting nanocrystalline cellulose suspension was then surface functionalized by TEMPO-mediated oxidation and solvent exchange process. Furthermore, the PLA/PHBV/nanocrystalline cellulose bionanocomposites were produced by solvent casting method. The effect of the addition of nanocrystalline cellulose on structural, morphology, mechanical and barrier properties of bionanocomposites was investigated. The results revealed that the developed bionanocomposites showed improved mechanical properties and decrease in oxygen permeability rate. Therefore, the developed bio-based composite incorporated with an optimal composition of nanocrystalline cellulose exhibits properties as compared to the polymer blend.

Matched MeSH terms: Product Packaging*
Fulltext Improving layout and workload of manufacturing system in small and medium enterprise (SME) using delmia quest

Dzullijah Ibrahim, Alifah Alyana, Hasrul Hafizuddin Hassim, Yusli Yaakob, Hamid Yusuf

ESTEEM Academic Journal, 2018;14(1):83-92.
MyJurnal

A facility layout can be defined as an arrangement of the equipment area in the
industry or organization of the factory. The main objective of this project was to
improve the existing layout in SMEs using DELMIA QUEST simulation. In this
project, new layouts are proposed to reduce the waiting time in a production
line and increase the productivity. This study focused on packaging production
line of a coffee manufacturing company located in Tasek Gelugor Pulau
Pinang. The problems identified in this production line are limited working
space, some processes overlap and are stuck due to high demands of the
products. This results in high lead time. The existing layout was studied and
simulated to improve certain parameters such as labour, machines, and shape
of the layout. The workstations were repositioned in the proposed layout before
undergoing simulation process using DELMIA QUEST software. From the
simulation results, the significant improvement was determined and the best
layout was chosen in terms of machines utilization and total output. Based on
this, a new layout is proposed to increase the productivity capacity and to meet
customers’ demands. Simulation data of the proposed layout showed its
productivity had increased to approximately 41.5%.

Matched MeSH terms: Product Packaging
Uncovering environmental performance patterns of plastic packaging waste in high recovery rate countries: An example of EU-27

Fan YV, Čuček L, Si C, Jiang P, Vujanović A, Krajnc D, et al.

Environ Res, 2024 Jan 15;241:117581.
PMID: 37967705 DOI: 10.1016/j.envres.2023.117581

Plastic consumption and its end-of-life management pose a significant environmental footprint and are energy intensive. Waste-to-resources and prevention strategies have been promoted widely in Europe as countermeasures; however, their effectiveness remains uncertain. This study aims to uncover the environmental footprint patterns of the plastics value chain in the European Union Member States (EU-27) through exploratory data analysis with dimension reduction and grouping. Nine variables are assessed, ranging from socioeconomic and demographic to environmental impacts. Three clusters are formed according to the similarity of a range of characteristics (nine), with environmental impacts being identified as the primary influencing variable in determining the clusters. Most countries belong to Cluster 0, consisting of 17 countries in 2014 and 18 countries in 2019. They represent clusters with a relatively low global warming potential (GWP), with an average value of 2.64 t CO2eq/cap in 2014 and 4.01 t CO2eq/cap in 2019. Among all the assessed countries, Denmark showed a significant change when assessed within the traits of EU-27, categorised from Cluster 1 (high GWP) in 2014 to Cluster 0 (low GWP) in 2019. The analysis of plastic packaging waste statistics in 2019 (data released in 2022) shows that, despite an increase in the recovery rate within the EU-27, the GWP has not reduced, suggesting a rebound effect. The GWP tends to increase in correlation with the higher plastic waste amount. In contrast, other environmental impacts, like eutrophication, abiotic and acidification potential, are identified to be mitigated effectively via recovery, suppressing the adverse effects of an increase in plastic waste generation. The five-year interval data analysis identified distinct clusters within a set of patterns, categorising them based on their similarities. The categorisation and managerial insights serve as a foundation for devising a focused mitigation strategy.

Matched MeSH terms: Product Packaging
Fulltext Development and Characterization of Biodegradable Composite Films Based on Gelatin Derived from Beef, Pork and Fish Sources

Nur Hanani ZA, Beatty E, Roos YH, Morris MA, Kerry JP

Foods, 2013 Jan 02;2(1):1-17.
PMID: 28239092 DOI: 10.3390/foods2010001

The objectives of this study were to develop composite films using various gelatin sources with corn oil (CO) incorporation (55.18%) and to investigate the mechanical and physical properties of these films as potential packaging films. There were increases (p < 0.05) in the tensile strength (TS) and puncture strength (PS) of films when the concentration of gelatin increased. The mechanical properties of these films were also improved when compared with films produced without CO. Conversely, the water barrier properties of composite films decreased (p < 0.05) when the concentration of gelatin in composite films increased. Comparing with pure gelatin films, water and oxygen barrier properties of gelatin films decreased when manufactured with the inclusion of CO.

Matched MeSH terms: Product Packaging
Fulltext Marketing strategies to improve the sales of bakery products of small-medium enterprise (SMEs) in Malaysia

S. Kiumarsi, Jayaraman, K., Salmi Mohd Isa, Asra Varastegani

International Food Research Journal, 2014;21(6):2101-2107.
MyJurnal

Bakery products become a regular food in most part of the world and are essential commodities today. There is a high potential for business growth in selling bakery products. In the business world, Small-Medium Enterprises (SMEs) are primarily engaged in the bakery business, but cannot compete with the branded bakery Industry. The SMEs in Malaysia are striving hard to achieve growth in the business of bakery products. The present case study deals with the issues faced by SMEs and provided some valid recommendations to resolve the existing problems in the bakery business. The case analysis and its findings reveal that SMEs have unstructured marketing strategies and needs enhancements in the areas of packaging, value add to the bakery products, focus on promotion and appropriate advertising strategies. Further, the analysis reveals that more coverage of selling points for bakery products, the increased number of distribution centers and proper incentives to the agents may definitely improve the marketing of bakery products.

Matched MeSH terms: Product Packaging
Quantitative exposure assessment for Listeria monocytogenes in cooked ham

Titik, B., Naiyana, C.

International Food Research Journal, 2010;17(2):267-280.
MyJurnal

The objectives of this study were predicting the transmission and survival of L. monocytogenes in cooked ham during supply chain. Cooked ham are frequently contaminated with L. monocytogenes during postprocessing steps through contact on surface of processing, handling, packaging equipment. Transfer rate of L. monocytogenes on static and dynamic condition in various surface type was investigated. The prevalence and level of L. monocytogenes in cooked ham at plant as well as the prevalence of unsatisfactory processing at retail were studied. A Monte Carlo simulation model was created by using @risk. The simulation predicted that the prevalence was 11.76 % with 90% confidence interval of 2% to 25% and estimated level was -4.02 log CFU/cm2. It was estimated to be occurred on slicing step at plant. Our results suggest that, the prevalence and level of L. monocytogenes can be reduced by Good Handling Process application and/or HACCP application.

Matched MeSH terms: Product Packaging
Fulltext Quality changes of fresh cut cantaloupe (Cucumis melo L. var Reticulatus cv. Glamour) in different types of polypropylene packaging

Syahidah, K., Rosnah, S., Noranizan, M.A., Zaulia, O.

International Food Research Journal, 2015;22(2):753-760.
MyJurnal

Consumers today prefer to purchase ready-to-eat, fresh-cut fruit that is readily available at the markets and retailers. They generally select the fresh-cut fruit base on the quality, freshness, nutrition and safety. The effects of packaging condition on fresh-cut Cantaloupe were studied during 18 days of storage at 2°C and 87% RH. Fresh-cut Cantaloupe pieces were packed in a Polypropylene (PP) container. As a control, the container was cover with lid without film, while Sample 1 (S1) was sealed only by a 40 μm PP film and Sample 2 (S2) was sealed with a 40 μm PP film and then adding the lid cover. Changes in colour, firmness Total Soluble Solids (TSS), pH, Titratable Acidity (TA) and Total Plate Count (TPC) were evaluated over time. During storage, it was found that the firmness significantly decreased from day 0 until day in all packaging conditions. Color parameters Luminosity (L*) and Chromaticity (C) were significantly change at the significance level of 95% (p

Matched MeSH terms: Product Packaging
Fulltext Mass modeling of Malaysian varieties Pomelo fruit (Citrus Grandis L. Osbeck) with some physical characteristics

Nur Salihah, B., Norashikin, A.A., Rosnah, S.

International Food Research Journal, 2015;22(2):0-0.
MyJurnal

Knowledge of physical characteristics of Malaysian variety pomelo fruits are necessary for the design of some post harvesting, processing systems such as cleaning, handling, grading and packaging system. For proper development of pomelo grading systems, important relationships between the mass and some physical characteristics of pomelo fruits such as length, width, thickness, surface area, projected areas and volumes must be known. The aim of this research was to measure physical characteristics of two Malaysian varieties of pomelo fruit; Ledang (PO55) and Tambun (PO52) varieties. In this study, the mass of pomelo fruit was evaluated and correlated to measure physical characteristics using Linear, Quadratic, S-curve and Power models. The results showed that the correlation of the mass of pomelo fruit with all measured physical characteristics was significant at the 0.01 probability level. In the nutshell, mass modeling of pomelo fruit for Ledang (PO55) and Tambun (PO52) varieties based on the projected area are recommended according to economical view.

Matched MeSH terms: Product Packaging
Fulltext Consumer’s preferences for eggs attributes in Malaysia: Evidence from conjoint survey

Ahmad Hanis, I.A.H., Mad Nasir, S., Jinap, S., Alias, R., Ab Karim, M.S.

International Food Research Journal, 2013;20(5):2865-2872.
MyJurnal

As Malaysian economies grow, Malaysian per capita income is likely to increase. From economics point of view, it is expected that better-off consumers will move to better quality of food attributes such as freshness, food safety, quality and healthfulness in their food intake. This study aimed to investigate the demand for eggs attributes by Malaysian consumers. The study considers the conjoint analysis technique as a method for acquiring insights into preferences for eggs product. The technique was applied to establish the trade-offs that Malaysian consumers make between size, colour, size of packaging, functional attribute and price in the purchasing of eggs for 202 respondents. Least squares regression was utilized to estimate the relative importance of attributes for eggs. The results revealed that the ideal characteristic of egg was one with large size (grade A), omega eggs, brown, and ten per packs. We also found that consumers were also willing to pay more for their preferred attributes. The results found in the study provide valuable inputs to producers or marketers to improve their marketing efforts as well as market positioning, in line with the demanded eggs attributes.

Matched MeSH terms: Product Packaging
Fulltext Coffee packaging: Consumer perception on appearance, branding and pricing

Harith, Z.T., Ting, C.H., Zakaria, N.N.A.

International Food Research Journal, 2014;21(3):849-853.
MyJurnal

In determining consumer’s acceptance of any products in the market, packaging appearance, branding and pricing of the products are important. This study focused on consumer’s perception towards the outlook of the coffee packaging which resulted in influencing their purchasing decision through survey study. This current study was done on three main issues namely appropriateness of appearance, branding and pricing as reflected by the first impression towards the product’s packaging. Survey was done targeting on consumers (n = 100) reside in Kelantan, Malaysia through printed and online questionnaires distribution. Results obtained shows that consumers notice the differences possessed by each coffee packaging in the market and they purchase what they like based on their perception. According to Pearson Correlation, respondents also have the opinion that appearance, branding and pricing are correlated to each other in order to convey the correct messages to the correct group of people (p-value > 0.5). Response from the respondents reflected the behaviour of consumers reside in Kelantan that the overall outlook (packaging appearance, branding and pricing) of a coffee packaging were taken into consideration during their buying process. Therefore, it is crucial for the packaging itself to be able to create emotional attachment in consumers’ mind during their first glimpse.

Matched MeSH terms: Product Packaging
Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties

Jumaidin R, Sapuan SM, Jawaid M, Ishak MR, Sahari J

Int J Biol Macromol, 2016 Aug;89:575-81.
PMID: 27177458 DOI: 10.1016/j.ijbiomac.2016.05.028

The aim of this work is to study the behavior of biodegradable sugar palm starch (SPS) based thermoplastic containing agar in the range of 10-40wt%. The thermoplastics were melt-mixed and then hot pressed at 140°C for 10min. SEM investigation showed good miscibility between SPS and agar. FT-IR analysis confirmed that SPS and agar were compatible and inter-molecular hydrogen bonds existed between them. Incorporation of agar increased the thermoplastic starch tensile properties (Young's modulus and tensile strength). The thermal stability and moisture uptake increased with increasing agar content. The present work shows that starch-based thermoplastics with 30wt% agar content have the highest tensile strength. Higher content of agar (40wt%) resulted to more rough cleavage fracture and slight decrease in the tensile strength. In conclusion, the addition of agar improved the thermal and tensile properties of thermoplastic SPS which widened the potential application of this eco-friendly material. The most promising applications for this eco-friendly material are short-life products such as packaging, container, tray, etc.

Matched MeSH terms: Product Packaging
Development and characterisation of packaging film from Napier cellulose nanowhisker reinforced polylactic acid (PLA) bionanocomposites

Sucinda EF, Abdul Majid MS, Ridzuan MJM, Cheng EM, Alshahrani HA, Mamat N

Int J Biol Macromol, 2021 Sep 30;187:43-53.
PMID: 34271052 DOI: 10.1016/j.ijbiomac.2021.07.069

A packaging material that is environment-friendly with excellent mechanical and physicochemical properties, biodegradable and ultraviolet (UV) protection and thermal stability was prepared to reduce plastic waste. Six different concentrations of Pennisetum purpureum/Napier cellulose nanowhiskers (NWCs) (i.e. 0, 0.5, 1.0, 1.5, 2.0, and 3.0 wt%) were used to reinforce polylactic acid (PLA) by a solvent casting method. The resulting bionanocomposite film samples were characterised in terms of their morphology, chemical structure, crystallinity, thermal degradation and stability, light transmittance, water absorption, biodegradability, and physical and mechanical properties. Field-emission scanning electron microscopy showed the excellent dispersion of NWC in the PLA matrix occurred with NWC concentrations of 0.5-1.5 wt%. All the bionanocomposite film samples exhibited good thermal stability at approximately 343-359 °C. The highest water absorption was 1.94%. The lowest transparency at λ800 was 16.16% for the PLA/3.0% NWC bionanocomposite film, which also has the lowest UVA and UVB transmittance of 7.49% and 4.02%, respectively, making it suitable for packaging materials. The PLA/1.0% NWC film exhibited the highest crystallinity of 50.09% and high tensile strength and tensile modulus of 21.22 MPa and 11.35 MPa, respectively.

Matched MeSH terms: Product Packaging*
Facile fabrication of arecanut palm sheath based robust hydrophobic cellulose nanopapers via self-assembly of ZnO nanoflakes and its shelf-life prediction for sustainable packaging applications

Poulose A, Mathew A, Uthaman A, Lal HM, Parameswaranpillai J, Mathiazhagan A, et al.

Int J Biol Macromol, 2024 Jan;255:128004.
PMID: 37979737 DOI: 10.1016/j.ijbiomac.2023.128004

Cellulose nanofibers have been extracted from arecanut palm sheath fibers via mild oxalic acid hydrolysis coupled with steam explosion technique. Cellulose nanofibers with diameter of 20.23 nm were obtained from arecanut palm sheath fibers. A series of robust hydrophobic cellulose nanopapers were fabricated by combining the synergistic effect of surface roughness induced by the successful deposition of zinc oxide (ZnO) nanoflakes and stearic acid modification via a simple and cost-effective method. In this work, agro-waste arecanut palm sheath was employed as a novel source for the extraction of cellulose nanofibers. 2 wt% of ZnO nanoflakes and 1 M concentration of stearic acid were used to fabricate mechanically robust hydrophobic cellulose nanopapers with a water contact angle (WCA) of 134°. During the deposition of zinc oxide nanoflakes on the CNP for inducing surface roughness, a hydrogen bonding interaction is formed between the hydroxyl groups of cellulose nanofibers and the zinc oxide nanoflakes. When this surface roughened CNP was dipped in stearic acid solution. The hydroxyl groups in zinc oxide nanoflakes undergoes esterification reaction with carboxyl groups in stearic acid solution forming an insoluble stearate layer and thus inducing hydrophobicity on CNP. The fabricated hydrophobic cellulose nanopaper displayed a tensile strength of 22.4 MPa and better UV blocking ability which is highly desirable for the sustainable packaging material in the current scenario. Furthermore, the service life of the pristine and modified cellulose nanopapers was predicted using the Arrhenius equation based on the tensile properties obtained during the accelerated ageing studies. The outcome of this study would be broadening the potential applications of hydrophobic and mechanically robust cellulose nanopapers in sustainable packaging applications.

Matched MeSH terms: Product Packaging
A data mining approach to analyze the role of biomacromolecules-based nanocomposites in sustainable packaging

Paul J, Jacob J, Mahmud M, Vaka M, Krishnan SG, Arifutzzaman A, et al.

Int J Biol Macromol, 2024 Apr;265(Pt 2):130850.
PMID: 38492706 DOI: 10.1016/j.ijbiomac.2024.130850

Recent decades have witnessed a surge in research interest in bio-nanocomposite-based packaging materials, but still, a lack of systematic analysis exists in this domain. Bio-based packaging materials pose a sustainable alternative to petroleum-based packaging materials. The current work employs bibliometric analysis to deliver a comprehensive outline on the role of bio nanocomposites in packaging. India, Iran, and China were revealed to be the top three nations actively engaged in this domain in total publications. Islamic Azad University in Iran and Universiti Putra Malaysia in Malaysia are among the world's best institutions in active research and publications in this field. The extensive collaboration between nations and institutions highlights the significance of a holistic approach towards bio-nanocomposite. The National Natural Science Foundation of China is the leading funding body in this field of research. Among authors, Jong whan Rhim secured the topmost citations (2234) in this domain (13 publications). Among journals, Carbohydrate Polymers secured the maximum citation count (4629) from 36 articles; the initial one was published in 2011. Bio nanocomposite is the most frequently used keyword. Researchers and policymakers focussing on sustainable packaging solutions will gain crucial insights on the current research status on packaging solutions using bio-nanocomposites from the conclusions.

Matched MeSH terms: Product Packaging
Fulltext Small/Kiddie Cigarette Packaging Size and Its Impact on Smoking: A Systematic Review

Mat Rifin H, Jane Ling MY, Robert Lourdes TG, Saminathan TA, Rodzlan Hasani WS, Ab Majid NL, et al.

Int J Environ Res Public Health, 2022 Sep 23;19(19).
PMID: 36231349 DOI: 10.3390/ijerph191912051

Background: Small cigarette pack sizes contain less than 20 cigarette sticks in a pack. Smaller packs may suggest lower costs, increasing affordability among lower-income users, especially the younger generation, which could lead to tobacco-related diseases and economic costs, including human capital lost results from tobacco-attributable morbidity and mortality. This concern has caused many countries to ban the sale of single cigarette sticks or kiddie packs. However, small cigarette pack sizes were proposed recently to be reintroduced by the tobacco industry with an excuse to prevent consumers from buying illicit cigarettes. This would demean efforts in combating tobacco consumption based on the existing tobacco control policies to prevent minors from purchasing cigarettes. Given the competing influences of affordability and availability of tobacco on consumption and the dearth of evidence-based review on the impact of pack size on smoking, this systematic review was conducted to identify the link between kiddie packs and smoking specifically on the initiation of smoking, urge/tendency to buy cigarettes among the general population and attempt to reduce cigarette consumption and prevalence of smoking using kiddie packs among current smokers. Methods: We include all studies except for reviews, guidelines, conference papers, commentaries, editorials, or opinion pieces. A database search was conducted in PubMed, EMBASE, CENTRAL, Web of Science and Scopus on 27 November 2021. The results were presented in the form of narrative synthesis under four groups: initiation of smoking; urge/tendency to buy cigarettes; the prevalence of smoking, and attempt to reduce cigarette consumption. The literature search identified 1601 articles, of which 21 articles had met the inclusion criteria. The methodological quality of all included articles was determined using a validated 16-item quality assessment tool (QATSDD). The average quality score for all papers was 34.8%. Discussion: Given the diverse study settings of the articles and despite the challenges of the methodological quality of some articles, this review provides some evidence that kiddie packs may increase the urge/tendency to buy cigarettes and mixed evidence on the attempt to reduce cigarette consumption. This review also found some evidence that kiddie pack purchasing among teenage smokers was higher compared to adults. However, we are uncertain about the link between kiddie packs and smoking initiation. Nevertheless, since most studies were of low quality, further high-quality studies are needed to conclude about the impact of kiddie packs on smoking to assist the policymakers and stakeholders in formulating new policies and strengthening existing strategies related to the kiddie packs.

Matched MeSH terms: Product Packaging
Reliability Assessment and Activation Energy Study of Au and Pd-Coated Cu Wires Post High Temperature Aging in Nanoscale Semiconductor Packaging

Gan CL, Hashim U

Journal of electronic packaging, 2013 Jun;135(2):0210101-210107.
PMID: 24891811

Wearout reliability and high temperature storage life (HTSL) activation energy of Au and Pd-coated Cu (PdCu) ball bonds are useful technical information for Cu wire deployment in nanoscale semiconductor device packaging. This paper discusses the influence of wire type on the wearout reliability performance of Au and PdCu wire used in fine pitch BGA package after HTSL stress at various aging temperatures. Failure analysis has been conducted to identify the failure mechanism after HTSL wearout conditions for Au and PdCu ball bonds. Apparent activation energies (Eaa) of both wire types are investigated after HTSL test at 150 °C, 175 °C and 200 °C aging temperatures. Arrhenius plot has been plotted for each ball bond types and the calculated Eaa of PdCu ball bond is 0.85 eV and 1.10 eV for Au ball bond in 110 nm semiconductor device. Obviously Au ball bond is identified with faster IMC formation rate with IMC Kirkendall voiding while PdCu wire exhibits equivalent wearout and or better wearout reliability margin compare to conventional Au wirebond. Lognormal plots have been established and its mean to failure (t50) have been discussed in this paper.

Matched MeSH terms: Product Packaging
Fulltext Effect of different types of plastic packaging films on the moisture and aflatoxin contents of pistachio nuts during storage

Shakerardekani A, Karim R

J Food Sci Technol, 2013 Apr;50(2):409-11.
PMID: 24425936 DOI: 10.1007/s13197-012-0624-0

Pistachio nut (Pistacia vera L.) is one of the popular tree nuts in the world. Proper selection of packaging materials is necessary to prevent absorption of moisture and aflatoxin formation which will influence the overall product quality and safety. This research is undertaken to study the effect of different type of flexible packaging films on the moisture and aflatoxin contents of whole pistachio nuts during storage at ambient temperature (22-28 °C) and relative humidity of 85-100%. Five types of plastic films tested were low density polyethylene (LDPE) which serves as the control, food-grade polyvinyl chloride (PVC), nylon (LDPE/PA), polyamide/polypropylene (PA/PP) and polyethylene terephthalate (PET). The moisture content and aflatoxin content of pistachio nuts were measured using oven drying method and HPLC, respectively. Sample were analysed at 0, 2, 4, 6, 8 and 10 months during the storage period. Results showed that there was an increase in moisture content with the increase in storage time of pistachio nuts. The increase in moisture content was associated with the aflatoxin level of pistachio nuts during storage time. All the packaging materials except LDPE delayed the moisture absorption and aflatoxin formation of the product. The most suitable packaging materials for maintaining the quality and safety of pistachio nuts is PET films followed by nylon, PA/PP and PVC. The shelf-life of pistachio can be extended from 2 months (Control) to 5 months when PET is used as the packaging material.

Matched MeSH terms: Product Packaging
Fulltext Effect of integration of oxalic acid and hot water treatments on postharvest quality of rambutan (Nephelium lappaceum L. cv. Anak Sekolah) under modified atmosphere packaging

Hafiz AFA, Keat YW, Ali A

J Food Sci Technol, 2017 Jun;54(7):2181-2185.
PMID: 28720977 DOI: 10.1007/s13197-017-2645-1

The shelf life of rambutan is often limited due to rapid water loss from the spinterns and browning of the pericarp. An integrated approach, which combined hot water treatment (HWT) (56 °C for 1 min), oxalic acid (OA) dip (10% for 10 min) and modified atmosphere packaging (MAP), was used to study their effectiveness on the quality of rambutan during storage (10 °C, 90-95% relative humidity). Significant differences were observed in rambutan quality with the combination of MAP + HWT + OA after 20 days of storage. This treatment combination resulted into better retention of firmness and colour (L and a* values) than in the control. Change in the total soluble solid content was significantly delayed however the titratable acidity showed no significant change in comparison to the control at the end of storage.

Matched MeSH terms: Product Packaging

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links