MyMedR

Displaying publications 1 - 20 of 142 in total

Abstract:

Sort:

Enhancing the Efficiency of a Dye-Sensitized Solar Cell Based on a Metal Oxide Nanocomposite Gel Polymer Electrolyte

Saidi NM, Omar FS, Numan A, Apperley DC, Algaradah MM, Kasi R, et al.

ACS Appl Mater Interfaces, 2019 Aug 21;11(33):30185-30196.
PMID: 31347822 DOI: 10.1021/acsami.9b07062

To overcome the critical limitations of liquid-electrolyte-based dye-sensitized solar cells, quasi-solid-state electrolytes have been explored as a means of addressing long-term device stability, albeit with comparatively low ionic conductivities and device performances. Although metal oxide additives have been shown to augment ionic conductivity, their propensity to aggregate into large crystalline particles upon high-heat annealing hinders their full potential in quasi-solid-state electrolytes. In this work, sonochemical processing has been successfully applied to generate fine Co3O4 nanoparticles that are highly dispersible in a PAN:P(VP-co-VAc) polymer-blended gel electrolyte, even after calcination. An optimized nanocomposite gel polymer electrolyte containing 3 wt % sonicated Co3O4 nanoparticles (PVVA-3) delivers the highest ionic conductivity (4.62 × 10-3 S cm-1) of the series. This property is accompanied by a 51% enhancement in the apparent diffusion coefficient of triiodide versus both unmodified and unsonicated electrolyte samples. The dye-sensitized solar cell based on PVVA-3 displays a power conversion efficiency of 6.46% under AM1.5 G, 100 mW cm-2. By identifying the optimal loading of sonochemically processed nanoparticles, we are able to generate a homogenous extended particle network that effectively mobilizes redox-active species through a highly amorphous host matrix. This effect is manifested in a selective 51% enhancement in photocurrent density (JSC = 16.2 mA cm-2) and a lowered barrier to N719 dye regeneration (RCT = 193 Ω) versus an unmodified solar cell. To the best of our knowledge, this work represents the highest known efficiency to date for dye-sensitized solar cells based on a sonicated Co3O4-modified gel polymer electrolyte. Sonochemical processing, when applied in this manner, has the potential to make meaningful contributions toward the ongoing mission to achieve the widespread exploitation of stable and low-cost dye-sensitized solar cells.

Matched MeSH terms: Electrolytes
Energy Band Gap Modulation in Nd-Doped BiFeO3/SrRuO3 Heteroepitaxy for Visible Light Photoelectrochemical Activity

Tan KH, Chen YW, Van CN, Wang H, Chen JW, Lim FS, et al.

ACS Appl Mater Interfaces, 2019 Jan 09;11(1):1655-1664.
PMID: 30561192 DOI: 10.1021/acsami.8b17758

The ability of band offsets at multiferroic/metal and multiferroic/electrolyte interfaces in controlling charge transfer and thus altering the photoactivity performance has sparked significant attention in solar energy conversion applications. Here, we demonstrate that the band offsets of the two interfaces play the key role in determining charge transport direction in a downward self-polarized BFO film. Electrons tend to move to BFO/electrolyte interface for water reduction. Our experimental and first-principle calculations reveal that the presence of neodymium (Nd) dopants in BFO enhances the photoelectrochemical performance by reduction of the local electron-hole pair recombination sites and modulation of the band gap to improve the visible light absorption. This opens a promising route to the heterostructure design by modulating the band gap to promote efficient charge transfer.

Matched MeSH terms: Electrolytes
Electrochemical Characteristics of a Polymer/Garnet Trilayer Composite Electrolyte for Solid-State Lithium-Metal Batteries

Walle KZ, Musuvadhi Babulal L, Wu SH, Chien WC, Jose R, Lue SJ, et al.

ACS Appl Mater Interfaces, 2021 Jan 20;13(2):2507-2520.
PMID: 33406841 DOI: 10.1021/acsami.0c17422

Although solid-state Li-metal batteries (LMBs) featuring polymer-based solid electrolytes might one day replace conventional Li-ion batteries, the poor Li-ion conductivity of solid polymer electrolytes at low temperatures has hindered their practical applications. Herein, we describe the first example of using a co-precipitation method in a Taylor flow reactor to produce the metal hydroxides of both the Ga/F dual-doped Li7La3Zr2O12 (Ga/F-LLZO) ceramic electrolyte precursors and the Li2MoO4-modified Ni0.8Co0.1Mn0.1O2 (LMO@T-LNCM 811) cathode materials for LMBs. The Li/Nafion (LiNf)-coated Ga/F-LLZO (LiNf@Ga/F-LLZO) ceramic filler was finely dispersed in the poly(vinylidene fluoride)/polyacrylonitrile/lithium bis(trifluoromethanesulfonimide)/succinonitrile matrix to give a trilayer composite polymer electrolyte (denoted "Tri-CPE") through a simple solution-casting. The bulk ionic conductivity of the Tri-CPE at room temperature was approximately 4.50 × 10-4 S cm-1 and exhibited a high Li+ ion transference number (0.84). It also exhibits a broader electrochemical window of 1-5.04 V versus Li/Li+. A full cell based on a CR2032 coin cell containing the LMO@T-LNCM811-based composite cathode, when cycled under 1 C/1 C at room temperature for 300 cycles, achieved an average Columbic efficiency of 99.4% and a capacity retention of 89.8%. This novel fabrication strategy for Tri-CPE structures has potential applications in the preparation of highly safe high-voltage cathodes for solid-state LMBs.

Matched MeSH terms: Electrolytes
Fulltext Performance Analysis of Jatropha Oil-Based Polyurethane Acrylate Gel Polymer Electrolyte for Dye-Sensitized Solar Cells

Rayung M, Aung MM, Su'ait MS, Chuah Abdullah L, Ahmad A, Lim HN

ACS Omega, 2020 Jun 23;5(24):14267-14274.
PMID: 32596563 DOI: 10.1021/acsomega.9b04348

Biobased polymers are useful materials in substituting conventional petroleum-derived polymers because of their good properties, ready availability, and abundance in nature. This study reports a new jatropha oil-based gel polymer electrolyte (GPE) for use in dye-sensitized solar cells (DSSCs). The GPE was prepared by mixing jatropha oil-based polyurethane acrylate (PUA) with different concentrations of lithium iodide (LiI). The GPE was characterized by infrared spectroscopy, thermal analysis, lithium nuclear magnetic resonance analysis, electrochemical analysis, and photocurrent conversion efficiency. The highest room-temperature ionic conductivity of 1.88 × 10-4 S cm-1 was obtained at 20 wt % of LiI salt. Additionally, the temperature-dependent ionic conductivity of the GPE exhibited Arrhenius behavior with an activation energy of 0.42 eV and a pre-exponential factor of 1.56 × 103 S cm-1. The electrochemical stability study showed that the PUA GPE was stable up to 2.35 V. The thermal stability of the gel electrolyte showed an improvement after the addition of the salt, suggesting a strong intermolecular interaction between PUA and Li, which leads to polymer-salt complexation, as proven by Fourier transform infrared spectroscopy analysis. A DSSC has been assembled using the optimum ionic conductivity gel electrolyte which indicated 1.2% efficiency under 1 sun condition. Thus, the jatropha oil-based GPE demonstrated favorable properties that make it a promising alternative to petroleum-derived polymer electrolytes in DSSCs.

Matched MeSH terms: Electrolytes
Fulltext Conductivity and FTIR studies of low molecular weight polyvinyl chloride-based polymer electrolytes

Ramesh, S., Shanti, R., Chin, S.F.

ASM Science Journal, 2011;5(1):19-26.
MyJurnal

In this present study, a series of polymer electrolyte thin films were synthesized by incorporating different ratios of lithium triflate (LiCF3SO3) in a low molecular weight polyvinyl chloride (PVC) matrix by the solution casting technique. The incorporation of LiCF3SO3 suppressed the high degree of crystallinity in PVC enabling the system to possess an appreciable ionic conductivity. The ionic conductivity of the samples, with different LiCF3SO3 content, was determined by the aid of ac impedance spectroscopy. The highest ionic conductivity of 4.04  10–9 S cm–1 was identified for the composition of PVC: LiCF3SO3 (75:25). Further understanding of the ionic conductivity mechanism was based on temperature-dependent conductivity data which obeyed Arrhenius theory, indicating that the ionic conductivity enhancement was thermally assisted. The possible dipole-dipole interaction between the chemical constituents was confirmed with changes in cage peak, analysed using Fourier transform infrared spectroscopy.

Matched MeSH terms: Electrolytes
Fulltext Ionic conductivity and morphological studies of plasticized poly (methyl methacrylate) polymer electrolyte films

Osman, Z., Othman, L., Md Isa, K.B., Ahmad, A., Kamarulzaman, N.

ASM Science Journal, 2010;4(1):55-61.
MyJurnal

In this study polymer electrolytes composed of poly(methyl methacrylate) (PMMA) as a host polymer and ethylene carbonate (EC) as a plasticizer complexed with different lithium salts, i.e. lithium tetrafluoroborate (LiBF4) and lithium triflate (LiCF3SO3) were prepared by the solution casting technique. The conductivities of the films were characterized by impedance spectroscopy. At room temperature, the highest conductivities were 4.07 × 10–7S cm–1 and 3.40 × 10–5 S cm–1 achieved, respectively from the films containing 30 wt% LiBF4 in the PMMA-EC-LiBF4 system and 35 wt% LiCF3SO3 in the PMMA-EC-LiCF3SO3 system. The conductivity-temperature dependence of the films seemed to obey the Arrhenius equation in which the ion transport in these materials was thermally assisted. Scanning electron microscopy analysis showed that the surface of PMMA-EC-LiCF3SO3 film was smooth and homogeneous, hence lithium ions could traverse through the PMMA-EC-LiCF3SO3 film more easily compared to the PMMA-EC-LiBF4 film. X-Ray diffraction studies revealed that complexation had occurred and the complexes formed were amorphous.

Matched MeSH terms: Electrolytes
Fulltext Refeeding hypophosphataemia after enteral nutrition in a Malaysian intensive care unit: risk factors and outcome

Md Ralib A, Mat Nor MB

Asia Pac J Clin Nutr, 2018 2 1;27(2):329-335.
PMID: 29384319 DOI: 10.6133/apjcn.062017.09

BACKGROUND AND OBJECTIVES: Refeeding hypophosphataemia (RH) is characterized by an acute electrolyte derangement following nutrition therapy. Complications associated include heart failure, respiratory failure, paraesthesia, seizure and death. We aim to assess its incidence, risk factors, and outcome in our local intensive care unit (ICU).
METHODS AND STUDY DESIGN: A prospective observational cohort study was conducted at the mixed medical- surgical of a tertiary ICU in Kuantan, Malaysia. The study was registered under the National Medical Research Register (NMRR-14-803-19813) and has received ethical approval. Inclusion criteria include adult admission longer than 48 hours who were started on enteral feeding. Chronic renal failure patients and those receiving dialysis were excluded. RH was defined as plasma phosphate less than 0.65 mmol/L and a drop of more than 0.16 mmol/L following feeding.
RESULTS: A total of 109 patients were recruited, of which 44 (42.6%) had RH. Patients with RH had higher SOFA score compared to those without (p=0.04). There were no differences in the APACHE II and NUTRIC scores. Serum albumin was lower in those with RH (p=0.04). After refeeding, patients with RH had lower serum phosphate, magnesium and albumin, and higher supplementation of phosphate, potassium and calcium. There were no differences in mortality, length of hospital or ICU stay.
CONCLUSIONS: Refeeding hypophosphataemia occurs in almost half of ICU admission. Risk factors for refeeding include high organ failure score and low albumin. Refeeding was associated with imbalances in phosphate, magnesium, potassium and calcium. Future larger study may further investigate these risk factors and long-term outcomes.

Matched MeSH terms: Electrolytes/blood
Fulltext Comparison between Ventriculosubgaleal Shunt and Extraventricular Drainage to Treat Acute Hydrocephalus in Adults

Nee LS, Harun R, Sellamuthu P, Idris Z

Asian J Neurosurg, 2017 Oct-Dec;12(4):659-663.
PMID: 29114279 DOI: 10.4103/ajns.AJNS_122_16

Context: Hydrocephalus, due to subarachnoid or intraventricular hemorrhage (IVH), meningitis, or tumor compression, is usually transient and may resolve after treatment. There are several temporary methods of cerebrospinal fluid (CSF) diversion, none of it is superior to the other, and the decision is based on its various etiologies and factors. Ventriculosubgaleal shunt (VSGS) is one of those temporary measures, which is a simple and rapid CSF decompression method without causing electrolyte and nutritional losses.

Aims: The aim is to study the efficacy of VSGS for temporary CSF diversion, compared to extraventricular drainage (EVD) in adult hydrocephalus patients; to evaluate the outcome in terms of avoiding a permanent shunt, and to look for incidences of their complications.

Settings and Design: This was a retrospective observational study.

Subjects and Methods: The data were acquired from case notes of fifty patients with acute hydrocephalus: 26 secondary to IVH, 10 from aneurysm rupture, 8 posttrauma, and 6 from infection. All these patients had undergone CSF diversion in Hospital Queen Elizabeth II, Sabah, Malaysia, between 2013 and 2015. The patients were followed up from the date of treatment until the resolution of hydrocephalus, where parameters such as shunt dependency and complications were documented.

Statistical Analysis Used: All analyses were carried out using Statistical Packages for the Social Sciences Version 22.0. Chi-squared test or Fisher's exact test is used for univariate analysis of categorical variables.

Results: A total of 21 (42%) patients underwent EVD insertion and 29 (58%) underwent VSGS insertion. Thirty-seven (74%) patients did not require a permanent shunt; 24 (64.8%) of them were from the VSGS group (P = 0.097). EVD had more intracranial complications (44.1%) compared with VSGS (23.5%), with a statistically significant P = 0.026.

Conclusions: VSGS is a safe and viable option for adult hydrocephalus patients, with the possibility of continuation of the treatment for such patients in nonneurosurgical centers, as opposed to patients with EVDs. Furthermore, even though this method had no statistical difference in avoiding a permanent ventriculoperitoneal shunt, VSGS has statistically significant less intracranial complications compared with EVD.

Matched MeSH terms: Electrolytes
Metabolic acidosis and renal solute load in relation to the protein intake of low birth weight Malaysian neonates

Johnson RO, Johnson BH, Raman A, Lee EL, Lam KL

Aust Paediatr J, 1979 Jun;15(2):101-6.
PMID: 485988
Matched MeSH terms: Electrolytes/blood
Characterization of un-plasticized and propylene carbonate plasticized carboxymethyl cellulose doped ammonium chloride solid biopolymer electrolytes

Ahmad NH, Isa MIN

Carbohydr Polym, 2016 Feb 10;137:426-432.
PMID: 26686147 DOI: 10.1016/j.carbpol.2015.10.092

Two solid biopolymer electrolytes (SBEs) systems of carboxymethyl cellulose doped ammonium chloride (CMC-AC) and propylene carbonate plasticized (CMC-AC-PC) were prepared via solution casting technique. The ionic conductivity of SBEs were analyzed using electrical impedance spectroscopy (EIS) in the frequency range of 50 Hz-1 MHz at ambient temperature (303K). The highest ionic conductivity of CMC-AC SBE is 1.43 × 10(-3)S/cm for 16 wt.% of AC while the highest conductivity of plasticized SBE system is 1.01 × 10(-2)S/cm when added with 8 wt.% of PC. TGA/DSC showed that the addition of PC had increased the decomposition temperature compared of CMC-AC SBE. Fourier transform infrared (FTIR) spectra showed the occurrence of complexation between the SBE components and it is proved successfully executed by Gaussian software. X-ray diffraction (XRD) indicated that amorphous nature of SBEs. It is believed that the PC is one of the most promising plasticizer to enhance the ionic conductivity and performance for SBE system.

Matched MeSH terms: Electrolytes/chemistry*
Characterization of conducting cellulose acetate based polymer electrolytes doped with "green" ionic mixture

Ramesh S, Shanti R, Morris E

Carbohydr Polym, 2013 Jan 2;91(1):14-21.
PMID: 23044100 DOI: 10.1016/j.carbpol.2012.07.061

Polymer electrolytes were developed by solution casting technique utilizing the materials of cellulose acetate (CA), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and deep eutectic solvent (DES). The DES is synthesized from the mixture of choline chloride and urea of 1:2 ratios. The increasing DES content well plasticizes the CA:LiTFSI:DES matrix and gradually improves the ionic conductivity and chemical integrity. The highest conducting sample was identified for the composition of CA:LiTFSI:DES (28 wt.%:12 wt.%:60 wt.%), which has the greatest ability to retain the room temperature ionic conductivity over the entire 30 days of storage time. The changes in FTIR cage peaks upon varying the DES content in CA:LiTFSI:DES prove the complexation. This complexation results in the collapse of CA matrix crystallinity, observed from the reduced intensity of XRD diffraction peaks. The DES-plasticized sample is found to be more heat-stable compared to pure CA. Nevertheless, the addition of DES diminishes the CA:LiTFSI matrix's heat-resistivity but at the minimum addition the thermal stability is enhanced.

Matched MeSH terms: Electrolytes/chemistry*
Electrical, structural, thermal and electrochemical properties of corn starch-based biopolymer electrolytes

Liew CW, Ramesh S

Carbohydr Polym, 2015 Jun 25;124:222-8.
PMID: 25839815 DOI: 10.1016/j.carbpol.2015.02.024

Biopolymer electrolytes containing corn starch, lithium hexafluorophosphate (LiPF6) and ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate (BmImPF6) are prepared by solution casting technique. Temperature dependence-ionic conductivity studies reveal Vogel-Tamman-Fulcher (VTF) relationship which is associated with free volume theory. Ionic liquid-based biopolymer electrolytes show lower glass transition temperature (Tg) than ionic liquid-free biopolymer electrolyte. X-ray diffraction (XRD) studies demonstrate higher amorphous region of ionic liquid-added biopolymer electrolytes. In addition, the potential stability window of the biopolymer electrolyte becomes wider and stable up to 2.9V. Conclusively, the fabricated electric double layer capacitor (EDLC) shows improved electrochemical performance upon addition of ionic liquid into the biopolymer electrolyte. The specific capacitance of EDLC based on ionic liquid-added polymer electrolyte is relatively higher than that of ionic liquid-free polymer electrolyte as depicted in cyclic voltammogram.

Matched MeSH terms: Electrolytes/chemistry*
Improvement of N-phthaloylchitosan based gel polymer electrolyte in dye-sensitized solar cells using a binary salt system

Yusuf SNF, Azzahari AD, Selvanathan V, Yahya R, Careem MA, Arof AK

Carbohydr Polym, 2017 Feb 10;157:938-944.
PMID: 27988011 DOI: 10.1016/j.carbpol.2016.10.032

A binary salt system utilizing lithium iodide (LiI) as the auxiliary component has been introduced to the N-phthaloylchitosan (PhCh) based gel polymer electrolyte consisting of ethylene carbonate (EC), dimethylformamide (DMF), tetrapropylammonium iodide (TPAI), and iodine (I2) in order to improve the performance of dye-sensitized solar cell (DSSC) with efficiency of 6.36%, photocurrent density, JSC of 17.29mAcm-2, open circuit voltage, VOC of 0.59V and fill factor, FF of 0.62. This efficiency value is an improvement from the 5.00% performance obtained by the DSSC consisting of only TPAI single salt system. The presence of the LiI in addition to the TPAI improves the charge injection rates and increases the iodide contribution to the total conductivity and both factors contribute to the increase in efficiency of the DSSC. The interaction behavior between polymer-plasticizer-salt was thoroughly investigated using EIS, FTIR spectroscopy and XRD.

Matched MeSH terms: Electrolytes
Phenyl-functionalized magnetic palm-based powdered activated carbon for the effective removal of selected pharmaceutical and endocrine-disruptive compounds

Wong KT, Yoon Y, Snyder SA, Jang M

Chemosphere, 2016 Jun;152:71-80.
PMID: 26963238 DOI: 10.1016/j.chemosphere.2016.02.090

Triethoxyphenylsilane (TEPS)-functionalized magnetic palm-based powdered activated carbon (MPPAC-TEPS) was prepared and characterized using various spectroscopic methods, and then tested for the removal of bisphenol A, carbamazepine, ibuprofen and clofibric acid. Magnetite film on MPPAC-TEPS was homogeneously coated on the outer surface of palm-based powdered activated carbon (PPAC) through a hydrothermal co-precipitation technique. Followed by silanization of phenyl-functionalized organosilane on MPPAC's magnetic film. As results, micro/mesopore surface area and volume increased without significant pore clogging and iron (Fe) dissolution under the acidic conditions was greatly decreased. The unique structural and chemical features of MPPAC-TEPS were found to be the main reasons for the enhanced adsorption rates and removal capacities of POPs. The presence of electrolytes and different pH values greatly affected the sorption efficiencies. The dominant sorption mechanism of POPs by MPPAC-TEPS was determined to be π-π interaction (physisorption), based on thermodynamic (ΔG°) and differential scanning calorimetry (DSC). Thermal regeneration at a low temperature (350 °C) was an effective method to desorb the retained POPs and enabled to reactivate MPPAC-TEPS with sustained sorption rates and capacities, whereas PPAC was largely exhausted. As a new type of sorbent for POPs, MPPAC-TEPS has operational advantages, such as magnetic separation and stable regeneration.

Matched MeSH terms: Electrolytes
A synergistic heterostructured ZnO/BaTiO3 loaded carbon photoanode in photocatalytic fuel cell for degradation of Reactive Red 120 and electricity generation

Ong YP, Ho LN, Ong SA, Banjuraizah J, Ibrahim AH, Lee SL, et al.

Chemosphere, 2019 Mar;219:277-285.
PMID: 30543963 DOI: 10.1016/j.chemosphere.2018.12.004

Photocatalytic fuel cell (PFC) is considered as a sustainable green technology which could degrade organic pollutant and generate electricity simultaneously. A synergistic double-sided ZnO/BaTiO3 loaded carbon plate heterojunction photoanode was fabricated in different ratios by using simple ultrasonication and mixed-annealed method. The double-sided design of photoanode allowed the lights irradiated at both sides of the photoanode. The ferroelectricity fabricated photoanode was applied in a membraneless PFC with platinum-loaded carbon as the cathode. Results revealed that the photoanode with 1:1 ratio of BaTiO3 and ZnO exhibited a superior photocatalytic activity among all the photoanodes prepared in this study. The heterojunction of this photoanode was able to achieve up to a removal efficiency of 93.67% with a maximum power density of 0.5284 μW cm-2 in 10 mg L-1 of Reactive Red 120 (RR120) without any supporting electrolyte. This photoanode was able to maintain at high performance after recycling 3 times. Overloading of ZnO above 50% on BaTiO3 could lead to deterioration of the performance of PFC due to the charge defects and light trapping ability. The interactions, interesting polarizations of the photocatalysts and proposed mechanism of the n-n type heterojunction in the photoanode of ZnO/BaTiO3 was also discussed.

Matched MeSH terms: Electrolytes
The use of inorganic ferrous-ferric oxide nanoparticles to improve fresh and durability properties of foamed concrete

Mydin MAO, Nawi MNM, Omar R, Khadimallah MA, Ali IM, Deraman R

Chemosphere, 2023 Mar;317:137661.
PMID: 36608888 DOI: 10.1016/j.chemosphere.2022.137661

Efforts to modify cement-based mixtures have continuously engrossed the interest of academics. Favourable impacts of nanoparticles, for instance, fine particle size and great reactivity, have made them be utilized in concrete. Foamed concrete (FC) is immensely porous, and its properties diminish with an increase in the number of pores. To enhance its properties, the FC matrix could be attuned by integrating numerous nanoparticles. The influence of ferrous-ferric oxide nanoparticles (FFO-NP) in FC was not discovered previously in the present body of knowledge. Thus, there is some uncertainty contemplating the mechanism to which extent the FFO-NP can affect the durability properties of FC. Hence, this study focuses on utilizing FFO-NP in the FC matrix. FC specimens with a density of 1000 kg/m3 were cast and tested. The objective was to assess the influence of different FFO-NP weight fractions (0.10%, 0.15%, 0.20%, 0.25%, 0.30%, and 0.35%) on durability properties such as drying shrinkage, porosity, water absorption and ultrasonic wave propagation velocity of FC. The results implied that the presence of a 0.25% weight fraction of FFO-NP in FC facilitates optimal water absorption, porosity, ultrasonic pulse velocity and drying shrinkage of FC. The presence of FFO-NP alters the microstructural of FC from loose needle-like into a dense cohesive microstructure of the cementitious composite. Besides, FFO-NP augments the FC matrix by filling the voids, microcracks, and spaces within the structure. Further than the ideal weight fraction of FFO-NP addition, the accretion of the FFO-NP was found, which caused a decline in durability properties.

Matched MeSH terms: Electrolytes
Ultrastructural response of embryonic axes of Fortunella polyandra to dehydration and cryopreservation

Al Zoubi OM, Normah MN

Cryo Letters, 2015 Nov-Dec;36(6):379-91.
PMID: 26963884

To further understand the survival characteristics of desiccation-sensitive excised embryonic axes of Fortunella polyandra to desiccation and cryopreservation it is necessary to study the impact of drying rates on both the ultrastructure and electrolyte leakage.

Matched MeSH terms: Electrolytes
Rapid fabrication of oxygen defective α-Fe2O3(110) for enhanced photoelectrochemical activities

Mohamad Noh MF, Ullah H, Arzaee NA, Ab Halim A, Abdul Rahim MAF, Mohamed NA, et al.

Dalton Trans, 2020 Sep 14;49(34):12037-12048.
PMID: 32869793 DOI: 10.1039/d0dt00406e

Defect engineering is increasingly recognized as a viable strategy for boosting the performance of photoelectrochemical (PEC) water splitting using metal oxide-based photoelectrodes. However, previously developed methods for generating point defects associated with oxygen vacancies are rather time-consuming. Herein, high density oxygen deficient α-Fe2O3 with the dominant (110) crystal plane is developed in a very short timescale of 10 minutes by employing aerosol-assisted chemical vapor deposition and pure nitrogen as a gas carrier. The oxygen-defective film exhibits almost 8 times higher photocurrent density compared to a hematite photoanode with a low concentration of oxygen vacancies which is prepared in purified air. The existence of oxygen vacancies improves light absorption ability, accelerates charge transport in the bulk of films, and promotes charge separation at the electrolyte/semiconductor interface. DFT simulations verify that oxygen-defective hematite has a narrow bandgap, electron-hole trapped centre, and strong adsorption energy of water molecules compared to pristine hematite. This strategy might bring PEC technology another step further towards large-scale fabrication for future commercialization.

Matched MeSH terms: Electrolytes
Enhancement of simultaneous batik wastewater treatment and electricity generation in photocatalytic fuel cell

Khalik WF, Ho LN, Ong SA, Voon CH, Wong YS, Yusuf SY, et al.

Environ Sci Pollut Res Int, 2018 Dec;25(35):35164-35175.
PMID: 30328543 DOI: 10.1007/s11356-018-3414-z

The objective of this study was to investigate several operating parameters, such as open circuit, different external resistance, pH, supporting electrolyte, and presence of aeration that might enhance the degradation rate as well as electricity generation of batik wastewater in solar photocatalytic fuel cell (PFC). The optimum degradation of batik wastewater was at pH 9 with external resistor 250 Ω. It was observed that open circuit of PFC showed only 17.2 ± 7.5% of removal efficiency, meanwhile the degradation rate of batik wastewater was enhanced to 31.9 ± 15.0% for closed circuit with external resistor 250 Ω. The decolorization of batik wastewater in the absence of photocatalyst due to the absorption of light irradiation by dye molecules and this process was known as photolysis. The degradation of batik wastewater increased as the external resistor value decreased. In addition, the degradation rate of batik wastewater also increased at pH 9 which was 74.4 ± 34.9% and at pH 3, its degradation rate was reduced to 19.4 ± 8.7%. The presence of aeration and sodium chloride as supporting electrolyte in batik wastewater also affected its degradation and electricity generation. The maximum absorbance of wavelength (λmax) of batik wastewater at 535 nm and chemical oxygen demand gradually decreased as increased in irradiation time; however, batik wastewater required prolonged irradiation time to fully degrade and mineralize in PFC system.

Matched MeSH terms: Electrolytes
Sono assisted electrocoagulation process for the removal of pollutant from pulp and paper industry effluent

Asaithambi P, Aziz ARA, Sajjadi B, Daud WMABW

Environ Sci Pollut Res Int, 2017 Feb;24(6):5168-5178.
PMID: 27221586 DOI: 10.1007/s11356-016-6909-5

In the present work, the efficiency of the sonication, electrocoagulation, and sono-electrocoagulation process for removal of pollutants from the industrial effluent of the pulp and paper industry was compared. The experimental results showed that the sono-electrocoagulation process yielded higher pollutant removal percentage compared to the sonication and electrocoagulation process alone. The effect of the operating parameters in the sono-electrocoagulation process such as electrolyte concentration (1-5 g/L), current density (1-5 A/dm(2)), effluent pH (3-11), COD concentration (1500-6000 mg/L), inter-electrode distance (1-3 cm), and electrode combination (Fe and Al) on the color removal, COD removal, and power consumption were studied. The maximum color and COD removal percentages of 100 and 95 %, respectively, were obtained at the current density of 4 A/dm(2), electrolyte concentration of 4 g/L, effluent pH of 7, COD concentration of 3000 mg/L, electrode combination of Fe/Fe, inter-electrode distance of 1 cm, and reaction time of 4 h, respectively. The color and COD removal percentages were analyzed by using an UV/Vis spectrophotometer and closed reflux method. The results showed that the sono-electrocoagulation process could be used as an efficient and environmental friendly technique for complete pollutant removal.

Matched MeSH terms: Electrolytes

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links